-/* BFD back end for traditional Unix core files (U-area and sections, raw)
- Copyright (C) 1988, 1989, 1991 Free Software Foundation, Inc. */
+/* BFD back end for traditional Unix core files (U-area and raw sections)
+ Copyright (C) 1988, 1989, 1991 Free Software Foundation, Inc.
+ Written by John Gilmore of Cygnus Support.
+
+This file is part of BFD, the Binary File Descriptor library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+/* To use this file on a particular host, configure the host with these
+ parameters in the config/h-HOST file:
+
+ HDEFINES=-DTRAD_CORE
+ HDEPFILES=trad-core.o
+
+ */
-/* This file does not define a particular back-end, but it defines routines
- that can be used by other back-ends. */
-#include <sysdep.h>
#include "bfd.h"
-#include <stdio.h>
+#include "sysdep.h"
#include "libbfd.h"
-
#include "libaout.h" /* BFD a.out internal data structures */
+#include <stdio.h>
#include <sys/types.h>
#include <sys/param.h>
#include <sys/dir.h>
#include <sys/user.h> /* After a.out.h */
#include <sys/file.h>
-#include <sys/stat.h>
#include <errno.h>
-/* need this cast b/c ptr is really void * */
-#define core_hdr(bfd) (((struct core_data *) (bfd->tdata))->hdr)
-#define core_datasec(bfd) (((struct core_data *) ((bfd)->tdata))->data_section)
-#define core_stacksec(bfd) (((struct core_data*)((bfd)->tdata))->stack_section)
-#define core_regsec(bfd) (((struct core_data *) ((bfd)->tdata))->reg_section)
-#define core_upage(bfd) (((struct core_data *) ((bfd)->tdata))->upage)
-
/* These are stored in the bfd's tdata */
struct core_data {
struct user *upage; /* core file header */
asection *reg_section;
};
+#define core_hdr(bfd) (((struct core_data *) (bfd->tdata))->hdr)
+#define core_upage(bfd) (((struct core_data *) ((bfd)->tdata))->upage)
+#define core_datasec(bfd) (((struct core_data *) ((bfd)->tdata))->data_section)
+#define core_stacksec(bfd) (((struct core_data*)((bfd)->tdata))->stack_section)
+#define core_regsec(bfd) (((struct core_data *) ((bfd)->tdata))->reg_section)
+
+/* Handle 4.2-style (and perhaps also sysV-style) core dump file. */
+
/* ARGSUSED */
bfd_target *
trad_unix_core_file_p (abfd)
bfd *abfd;
{
-#if HOST_SYS == SUN_SYS
- return 0;
-#else
int val;
- char *rawptr;
struct user u;
unsigned int reg_offset, fp_reg_offset;
-
- /* 4.2-style (and perhaps also sysV-style) core dump file. */
+ /* This struct is just for allocating two things with one zalloc, so
+ they will be freed together, without violating alignment constraints. */
+ struct core_user {
+ struct core_data coredata;
+ struct user u;
+ } *rawptr;
val = bfd_read ((void *)&u, 1, sizeof u, abfd);
if (val != sizeof u)
/* Allocate both the upage and the struct core_data at once, so
a single free() will free them both. */
- rawptr = (char *)zalloc (sizeof (u) + sizeof (struct core_data));
+ rawptr = (struct core_user *)bfd_zalloc (abfd, sizeof (struct core_user));
if (rawptr == NULL) {
bfd_error = no_memory;
return 0;
}
- set_tdata (abfd, (struct core_data *)rawptr);
- core_upage (abfd) = (struct user *)(rawptr + sizeof (struct core_data));
+ set_tdata (abfd, &rawptr->coredata);
+ core_upage (abfd) = &rawptr->u;
*core_upage (abfd) = u; /* Save that upage! */
- /* create the sections. This is raunchy, but bfd_close wants to reclaim
- them */
+ /* Create the sections. This is raunchy, but bfd_close wants to free
+ them separately. */
core_stacksec (abfd) = (asection *) zalloc (sizeof (asection));
if (core_stacksec (abfd) == NULL) {
loser:
core_datasec (abfd)->name = ".data";
core_regsec (abfd)->name = ".reg";
- core_stacksec (abfd)->flags = SEC_ALLOC + SEC_LOAD;
- core_datasec (abfd)->flags = SEC_ALLOC + SEC_LOAD;
- core_regsec (abfd)->flags = SEC_ALLOC;
+ core_stacksec (abfd)->flags = SEC_ALLOC + SEC_LOAD + SEC_HAS_CONTENTS;
+ core_datasec (abfd)->flags = SEC_ALLOC + SEC_LOAD + SEC_HAS_CONTENTS;
+ core_regsec (abfd)->flags = SEC_ALLOC + SEC_HAS_CONTENTS;
core_datasec (abfd)->size = NBPG * u.u_dsize;
core_stacksec (abfd)->size = NBPG * u.u_ssize;
/* What a hack... we'd like to steal it from the exec file,
since the upage does not seem to provide it. FIXME. */
- core_datasec (abfd)->vma = TEXT_START_ADDR + (NBPG * u.u_tsize);
- core_stacksec (abfd)->vma = STACK_END_ADDR - (NBPG * u.u_ssize);
- core_regsec (abfd)->vma = -1;
+#ifdef HOST_DATA_START_ADDR
+ core_datasec (abfd)->vma = HOST_DATA_START_ADDR;
+#else
+ core_datasec (abfd)->vma = HOST_TEXT_START_ADDR + (NBPG * u.u_tsize);
+#endif
+ core_stacksec (abfd)->vma = HOST_STACK_END_ADDR - (NBPG * u.u_ssize);
+ /* This is tricky. As the "register section", we give them the entire
+ upage and stack. u.u_ar0 points to where "register 0" is stored.
+ There are two tricks with this, though. One is that the rest of the
+ registers might be at positive or negative (or both) displacements
+ from *u_ar0. The other is that u_ar0 is sometimes an absolute address
+ in kernel memory, and on other systems it is an offset from the beginning
+ of the `struct user'.
+
+ As a practical matter, we don't know where the registers actually are,
+ so we have to pass the whole area to GDB. We encode the value of u_ar0
+ by setting the .regs section up so that its virtual memory address
+ 0 is at the place pointed to by u_ar0 (by setting the vma of the start
+ of the section to -u_ar0). GDB uses this info to locate the regs,
+ using minor trickery to get around the offset-or-absolute-addr problem. */
+ core_regsec (abfd)->vma = 0 - (int) u.u_ar0;
core_datasec (abfd)->filepos = NBPG * UPAGES;
core_stacksec (abfd)->filepos = (NBPG * UPAGES) + NBPG * u.u_dsize;
abfd->section_count = 3;
return abfd->xvec;
-#endif
}
char *
{
return true; /* FIXME, We have no way of telling at this point */
}
+\f
+/* No archive file support via this BFD */
+#define trad_unix_openr_next_archived_file bfd_generic_openr_next_archived_file
+#define trad_unix_generic_stat_arch_elt bfd_generic_stat_arch_elt
+#define trad_unix_slurp_armap bfd_false
+#define trad_unix_slurp_extended_name_table bfd_true
+#define trad_unix_write_armap (PROTO (boolean, (*), \
+ (bfd *arch, unsigned int elength, struct orl *map, int orl_count, \
+ int stridx))) bfd_false
+#define trad_unix_truncate_arname bfd_dont_truncate_arname
+#define aout_32_openr_next_archived_file bfd_generic_openr_next_archived_file
+
+#define trad_unix_close_and_cleanup bfd_generic_close_and_cleanup
+#define trad_unix_set_section_contents (PROTO(boolean, (*), \
+ (bfd *abfd, asection *section, PTR data, file_ptr offset, \
+ bfd_size_type count))) bfd_false
+#define trad_unix_get_section_contents bfd_generic_get_section_contents
+#define trad_unix_new_section_hook (PROTO (boolean, (*), \
+ (bfd *, sec_ptr))) bfd_true
+#define trad_unix_get_symtab_upper_bound bfd_0u
+#define trad_unix_get_symtab (PROTO (unsigned int, (*), \
+ (bfd *, struct symbol_cache_entry **))) bfd_0u
+#define trad_unix_get_reloc_upper_bound (PROTO (unsigned int, (*), \
+ (bfd *, sec_ptr))) bfd_0u
+#define trad_unix_canonicalize_reloc (PROTO (unsigned int, (*), \
+ (bfd *, sec_ptr, arelent **, struct symbol_cache_entry**))) bfd_0u
+#define trad_unix_make_empty_symbol (PROTO ( \
+ struct symbol_cache_entry *, (*), (bfd *))) bfd_false
+#define trad_unix_print_symbol (PROTO (void, (*), \
+ (bfd *, PTR, struct symbol_cache_entry *, \
+ bfd_print_symbol_type))) bfd_false
+#define trad_unix_get_lineno (PROTO (alent *, (*), \
+ (bfd *, struct symbol_cache_entry *))) bfd_nullvoidptr
+#define trad_unix_set_arch_mach (PROTO (boolean, (*), \
+ (bfd *, enum bfd_architecture, unsigned long))) bfd_false
+#define trad_unix_find_nearest_line (PROTO (boolean, (*), \
+ (bfd *abfd, struct sec *section, \
+ struct symbol_cache_entry **symbols,bfd_vma offset, \
+ CONST char **file, CONST char **func, unsigned int *line))) bfd_false
+#define trad_unix_sizeof_headers (PROTO (int, (*), \
+ (bfd *, boolean))) bfd_0
+
+#define trad_unix_bfd_debug_info_start bfd_void
+#define trad_unix_bfd_debug_info_end bfd_void
+#define trad_unix_bfd_debug_info_accumulate (PROTO (void, (*), \
+ (bfd *, struct sec *))) bfd_void
+
+/* If somebody calls any byte-swapping routines, shoot them. */
+void
+swap_abort()
+{
+ abort(); /* This way doesn't require any declaration for ANSI to fuck up */
+}
+#define NO_GET ((PROTO(bfd_vma, (*), ( bfd_byte *))) swap_abort )
+#define NO_PUT ((PROTO(void, (*), (bfd_vma, bfd_byte *))) swap_abort )
+
+bfd_target trad_core_vec =
+ {
+ "trad-core",
+ bfd_target_unknown_flavour,
+ true, /* target byte order */
+ true, /* target headers byte order */
+ (HAS_RELOC | EXEC_P | /* object flags */
+ HAS_LINENO | HAS_DEBUG |
+ HAS_SYMS | HAS_LOCALS | DYNAMIC | WP_TEXT | D_PAGED),
+ (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
+ ' ', /* ar_pad_char */
+ 16, /* ar_max_namelen */
+ 3, /* minimum alignment power */
+ NO_GET, NO_PUT, NO_GET, NO_PUT, NO_GET, NO_PUT, /* data */
+ NO_GET, NO_PUT, NO_GET, NO_PUT, NO_GET, NO_PUT, /* hdrs */
+
+ {_bfd_dummy_target, _bfd_dummy_target,
+ _bfd_dummy_target, trad_unix_core_file_p},
+ {bfd_false, bfd_false, /* bfd_create_object */
+ bfd_false, bfd_false},
+ {bfd_false, bfd_false, /* bfd_write_contents */
+ bfd_false, bfd_false},
+
+ JUMP_TABLE(trad_unix)
+};
projects / deliverable / binutils-gdb.git / blobdiff