+Wed Jun 21 17:32:45 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
+
+ * Makefile.in (DISTSTUFF): Don't include info here.
+ (diststuff): Include it here.
+ (realclean): Remove *.info.
+
+ * objdump.c (compare_relocs): If relocation entries have the same
+ address, keep them in file order.
+
+Mon Jun 19 09:06:49 1995 Steve Chamberlain <sac@slash.cygnus.com>
+
+ * dlltool.c: Change names of generated files. .*.s-> -*.s
+
+ * objdump.c (dump_section_stabs): Check for names
+ which are supersets of selected names. binutils/7240.
+
+Wed Jun 14 19:43:52 1995 Doug Evans <dje@canuck.cygnus.com>
+
+ * dlltool.c (mtable, ARM jump): Must redirect via pc offsetable ptr.
+
+Wed Jun 14 13:27:22 1995 Steve Chamberlain <sac@slash.cygnus.com>
+
+ * deflex.l, defparse.y, dlltool.c: New files.
+ * Makefile.in, configure.in: Support for them.
+
+Mon Jun 12 11:27:54 1995 Steve Chamberlain <sac@slash.cygnus.com>
+
+ * sysdump.c: Include sysdep.h
+ (main): Open input with FOPEN_RB. binutils/7137
+
+Fri Jun 9 17:26:11 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * objdump.c (wide_output): New flag variable.
+ (usage): Print new -w, --wide options.
+ (long_options): Add --wide support.
+ (dump_section_header): If --wide, don't print a newline between
+ the section's first line and the flags.
+ (objdump_print_address): Use unsigned comparisons for the binary
+ search, not signed.
+ (disassemble_data): If --wide, don't put a \n between the
+ disassembly output and relocation information.
+ (main): Support -w option being the same as --wide.
+
+Thu Jun 1 17:09:27 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
+
+ Sat May 6 08:52:24 1995 H.J. Lu (hjl@nynexst.com)
+
+ * objcopy.c (smart_rename): make it smarter, clean up
+ if rename () fails.
+
+Tue May 30 14:24:15 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
+
+ * Makefile.in: Delete lines with lots of #### because four or more
+ indicate a point for makefile fragment substitution.
+
+Tue May 9 17:17:05 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * configure.in: Don't build nlmconv on PowerPC eabi any more, it
+ is not needed.
+
+Thu Apr 27 20:21:24 1995 Doug Evans <dje@canuck.cygnus.com>
+
+ * Makefile.in (EXPECT): Define.
+ (RUNTEST): Use one in source tree if present.
+ (check): Set `rootme' for $(EXPECT).
+
+Wed Apr 26 18:26:21 1995 Steve Chamberlain <sac@slash.cygnus.com>
+
+ * srconv.c (main): Add support for -n option which disables
+ prescan of common symbols.
+ (wr_ob): If reading past the end of a section, fill with zeros.
+
+Tue Apr 25 19:14:37 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
+
+ * objdump.c (dump_section_header): Display load address after
+ virtual memory (run-time) address.
+
+Wed Apr 19 09:44:06 1995 Jason Merrill <jason@phydeaux.cygnus.com>
+
+ * Makefile.in (cplus-dem.o): Pass -DVERSION='"$(VERSION)"' to the
+ compile.
+ (DEMANGLER_PROG): No longer uses version.o.
+
+Mon Apr 10 13:29:49 1995 Stan Shebs <shebs@andros.cygnus.com>
+
+ Merge in support for Mac MPW as a host.
+ (Old change descriptions retained for informational value.)
+
+ * mpw-config.in (TDEFINES): Define as empty in makefile frag.
+
+ * mpw-config.in: Create mk.tmp, define ARCHDEFS in it.
+
+ * mpw-config.in: New file, MPW configure fragment for binutils.
+ * mpw-make.in (install-only): New target.
+ (install): Also depend on install-only.
+
+ * mpw-make.in (cplusfilt): Renamed from c++filt.
+ (INCLUDES): Add more paths.
+
+ * mpw-make.in: New file, MPW makefile fragment for binutils.
+ (Normally automatically generated from Makefile.in.)
+
+Mon Mar 27 11:52:57 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * ar.c (write_archive): Call make_tempname to get output file
+ name, rather than using a fixed name based on the input file.
+
+ * objcopy.c (make_tempname): Copy from here...
+ * bucomm.c (make_tempname): ...to here, and make global.
+ * bucomm.h (make_tempname): Declare.
+
+Fri Mar 24 11:47:42 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * strings.c: Include "bfd.h" before other headers. Include
+ "sysdep.h".
+ * bucomm.c (print_arelt_descr): Cast st_uid and st_gid to long,
+ and print them with %ld.
+
+Fri Mar 10 13:09:42 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * objcopy.c (strip_options): Add --keep-symbol.
+ (copy_options): Likewise.
+ (copy_usage): Mention --keep-symbol and -K.
+ (strip_usage): Likewise.
+ (keep_symbols): New static variable.
+ (is_strip_symbol): Adjust the return value according to
+ keep_symbols.
+ (strip_main): Handle -K. For -N, check that -K was not given.
+ (copy_main): Likewise.
+ * binutils.texi, objcopy.1, strip.1: Document -K.
+
+Mon Mar 6 13:33:47 1995 Stan Shebs <shebs@andros.cygnus.com>
+
+ * objcopy.c (copy_archive): Check result of mkdir.
+ (copy_main): Cast an xmalloc result.
+
+ * objdump.c (usage): Break long format string into shorter ones.
+
+Mon Mar 6 13:46:12 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * bucomm.c (list_supported_targets): New function.
+ * bucomm.h (list_supported_targets): Declare.
+ * ar.c (usage): Call list_supported_targets.
+ * nm.c (usage): Likewise.
+ * objcopy.c (copy_usage, strip_usage): Likewise.
+ * objdump.c (usage): Likewise.
+ * size.c (usage): Likewise.
+ * strings.c (usage): Likewise.
+
+Tue Feb 28 15:13:58 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * bucomm.c (print_arelt_descr): Cast st_size to long before
+ passing it to fprintf.
+
+Fri Feb 17 13:36:45 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * objcopy.c (struct section_list): Add fields remove, set_flags,
+ and flags. Change adjust from boolean to enum.
+ (remove_sections): Remove static variable.
+ (sections_removed): New static variable.
+ (copy_options): Add --set-section-flags.
+ (copy_usage): Mention --set-section-flags.
+ (parse_flags): New static function.
+ (find_section_list): New static function.
+ (is_strip_symbol): Change return type from int to boolean.
+ (is_strip_section): New static function.
+ (filter_symbols): Call is_strip_section.
+ (copy_object): When adding sections, check for specified flags or
+ VMA. Call filter_symbols if any sections are being removed.
+ (setup_section): Use find_section_list function rather than
+ looking through remove_sections and adjust_sections. Handle
+ --set-section-flags.
+ (copy_section): Use find_section_list rather than looking through
+ remove_sections.
+ (strip_main): Use find_section_list instead of adding items to
+ sections_removed.
+ (copy_main): Use find_section_list instead of adding items to
+ sections_removed and adjust_sections. Handle --set-section-flags.
+ * binutils.texi, objcopy.1: Document --set-section-flags.
+
+Tue Feb 14 18:03:03 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * objdump.c (with_source_code): New global variable.
+ (usage): Mention -S/--source.
+ (long_options): Add --source.
+ (prev_functionname, prev_line): New static variables.
+ (struct print_file_list): Define.
+ (print_files): New static variable.
+ (skip_to_line, show_line): New static functions.
+ (disassemble_data): Call show_line to handle -l and -S.
+ (main): Handle -S.
+ * binutils.texi, objdump.1: Document -S/--source.
+
+Thu Feb 9 16:11:53 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * objcopy.c (copy_usage): Rename parameter to avoid shadowing.
+ (strip_usage): Likewise.
+
+ * objcopy.c (struct section_add): Define.
+ (add_sections): New static variable.
+ (copy_options): Accept --add-section.
+ (copy_usage): Mention --add-section.
+ (copy_object): Add sections from the add_sections list.
+ (copy_main): Handle --add-section.
+ * binutils.texi, objcopy.1: Document --add-section.
+
+Wed Feb 1 15:04:57 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
+
+ * objdump.c (disassemble_data): Pass section offset, not absolute
+ address, to bfd_find_nearest_line.
+
+ * nlmconv.c (powerpc_mangle_relocs): Don't use const with
+ reloc_howto_type.
+
+Thu Jan 26 18:50:06 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * objdump.c (compare_symbols): Use bfd_asymbol_value (VAR) rather
+ than VAR->value.
+ (objdump_print_address): Likewise.
+ (disassemble_data): Don't change the symbol values. It can
+ confuse bfd_canonicalize_reloc.
+
+Thu Jan 26 12:03:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * configure.in: Add support for powerpc-*-ebai.
+
+Wed Jan 18 10:02:12 1995 Steve Chamberlain <sac@splat>
+
+ * coffdump.c: Include sysdep.h.
+ (dump_coff_type): Hanlde coff_secdef_type.
+ * coffgrok.c : Include sysdep.h.
+ * srconv.c: Include libiberty.h
+ (absolute_p, dty_start, dty_end, dump_tree_structure): Remove.
+
+Wed Jan 18 12:24:14 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
+
+ * coffdump.c (dump_coff_scope): Cast pointer to unsigned long for
+ printf.
+ * coffgrok.c: Include bucomm.h. Don't declare xmalloc.
+ (push_scope): Declare type of parameter link.
+ * size.c: Include libiberty.h.
+ * srconv.c: Include bucomm.h.
+ (find_base): Declare at top of file.
+ (wr_hd): Add default case to architecture switch.
+ (wr_dps_start): Declare type of parameter nest.
+ (wr_du): Comment out variables used only in commented out blocks.
+ (wr_dus): Remove unused variable i.
+ (wr_sc): Remove unused variables myinfo, low, and high.
+ * strings.c: Include libiberty.h.
+ * sysdump.c: Include <ctype.h>.
+
+Tue Dec 20 19:13:44 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
+
+ * ar.c (main): Ignore 'f' modifier used on HP/UX 9.
+
+Thu Dec 15 17:34:12 1994 Stan Shebs <shebs@andros.cygnus.com>
+
+ * ar.c, nm.c, objcopy.c, objdump.c: Include progress.h.
+ * ar.c, nm.c, objcopy.c, objdump.c (main): Add START_PROGRESS
+ and END_PROGRESS.
+ * ar.c (map_over_members, open_inarch): Call PROGRESS.
+ * nm.c (main, display_archive, filter_symbols, print_symbols):
+ Call PROGRESS.
+
+ * objcopy.c (copy_usage): Break up long usage string.
+
+Wed Dec 14 15:51:56 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
+
+ * objcopy.c (copy_object): Don't bother setting status after
+ nonfatal() "call", because it won't return.
+
+Fri Dec 9 00:22:54 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * nlmconv.c (powerpc_mangle_relocs): Don't switch a reloc to use
+ the section symbol if the symbol is undefined.
+
+Thu Dec 8 14:45:50 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
+
+ * objcopy.c (add_strip_symbol): Cast return value of xmalloc.
+
+Wed Nov 30 11:05:43 1994 Ian Lance Taylor <ian@rtl.cygnus.com>
+
+ * ar.c (replace_members): Pass current->filename to normalize when
+ checking for duplicates, because the filename of a newly added
+ file will not have been normalized yet.
+
+Thu Nov 17 15:00:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
+
+ * ar.c (main): Don't call do_quick_append if any of the archive
+ names are longer than 14 characters.
+
+ * objcopy.c (main): Fix is_strip test. From
+ pirker@eiunix.tuwien.ac.at (Martin Pirker).
+
+Thu Nov 17 15:37:19 1994 Mark W. Eichin <eichin@cygnus.com>
+
+ * objcopy.c (add_strip_symbol): New function, adds a name to an
+ explicit list of symbols to strip.
+ (is_strip_symbol): New function, reports whether the name argument
+ is in the explicit list.
+ (filter_symbols): Check against is_strip_symbol above all.
+ (strip_main): Recognize -N option. If used, don't default to
+ strip_all.
+ (copy_main): Recognize -N option.
+ (strip_usage): Document -N and --strip-symbol options.
+ (copy_usage): Ditto.
+ * objcopy.1, strip.1, binutils.texi: Document -N and
+ --strip-symbol options.
+
+Tue Nov 8 13:12:54 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
+
+ * objdump.c (display_target_list, display_info_table): Pass an
+ array to tmparg, rather than NULL, since some systems can't handle
+ NULL.
+
+ * objcopy.c (copy_archive): Keep a list of the names of the
+ temporary files we created. Close each input BFD after we open
+ its successor.
+
+Mon Nov 7 15:48:39 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
+
+ * Makefile.in (VERSION): Bump to 2.5.3.
+
+Thu Nov 3 19:04:34 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
+
+ * Makefile.in (install-info): Install info files from whatever
+ directory they were found in.
+
+ Patch from DJ Delorie:
+ * configure.bat: do c++filt -> cxxfilt right
+
+ * sysinfo.y: Include system header files early, so any potential
+ declaration of abort() occurs before its use.
+
+ * strings.c (strings_file): Try opening the file in binary mode
+ first.
+
+Wed Nov 2 15:44:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
+
+ * ar.c (main): Treat ar qs like ar rs.
+
+Tue Oct 25 16:19:25 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
+
+ * objcopy.c (gap_fill): Explicitly initialize, for clarity.
+ (pad_to_set, pad_to): New static variables.
+ (copy_options): Accept --pad-to.
+ (copy_usage): Mention --pad-to.
+ (copy_object): Support --pad-to.
+ (compare_section_vma): Sort non loadable sections to the front.
+ Sort sections with the same VMA by size.
+ (copy_main): Handle --pad-to.
+ * binutils.texi, objcopy.1: Document --pad-to.
+
+Thu Oct 20 13:51:31 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * objcopy.c (gap_fill_set, gap_fill): New static variables.
+ (copy_options): Accept --gap-fill.
+ (copy_usage): Mention --gap-fill.
+ (copy_object): Support --gap-fill.
+ (get_sections, compare_section_vma): New static functions.
+ (copy_main): Handle --gap-fill.
+ * binutils.texi, objcopy.1: Document --gap-fill.
+
+Wed Oct 19 14:09:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
+
+ * Makefile.in (check): Add a dummy else clause to the if
+ statement.
+
+ * objcopy.c (copy_object): Revert yesterday's change.
+ * binutils.texi, objcopy.1: Remove special mention of --set-start
+ and `binary' output format.
+
+Tue Oct 18 11:12:01 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
+
+ * objcopy.c (copy_object): If the output file format is `binary',
+ and the start address was not set using --set-start, default the
+ start address to zero. This hack is because the `binary' output
+ file format uses the start address to set the virtual address of
+ the first byte in the file.
+ * binutils.texi, objcopy.1: Add some notes on generating S-records
+ and binary files.
+
+ * nm.c (print_symdef_entry): Call print_symname to print the
+ symbol name, so that --demangle works.
+
+ * Makefile.in (mostlyclean): Remove tmpdir.
+
+ * objcopy.c (struct section_list): Add fields used, adjust, val.
+ (adjust_start, set_start_set, set_start): New static variables.
+ (adjust_section_vma, adjust_sections): New static variables.
+ (copy_options): Add --adjust-start, --adjust-vma,
+ --adjust-section-vma, --adjust-warnings, --no-adjust-warnings,
+ --set-start.
+ (parse_vma): New static function.
+ (copy_usage): Mention new options.
+ (copy_object): Handle --set-start and --adjust-start.
+ (setup_section): Correct type of last argument to PTR. Set used
+ field if section is removed. Handle --adjust-vma and
+ --adjust-section-vma.
+ (copy_section): Correct type of last argument to PTR.
+ (mark_symbols_used_in_relocations): Likewise.
+ (strip_main): Clear used field when handling -R.
+ (copy_main): Handle new options.
+ * binutils.texi (objcopy): Document new options.
+ * objcopy.1: Document new options.
+
+Fri Oct 14 14:38:13 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
+
+ * configure.in (configdirs): Remove definition--testsuite is no
+ longer configured.
+ * Makefile.in (testsuite): Remove target.
+ (site.exp): New target.
+ (check): Rewrite.
+ (clean, distclean): Don't recur into testsuite directory.
+
+Thu Oct 13 19:24:09 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
+
+ * Makefile.in (VERSION): Updated to 2.5.
+ * Version 2.5 released.
+
+Tue Oct 11 15:26:42 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
+
+ * Makefile.in (sysdump.o): Depends upon sysroff.c.
+
+Mon Oct 10 13:50:30 1994 J.T. Conklin (jtc@rtl.cygnus.com)
+
+ * nlmconv.c (link_inputs): Pass -Ur flag to ld so that the
+ ctor/dtor tables needed by C++ programs are built.
+
+Sun Oct 9 18:04:00 1994 Jim Wilson (wilson@sphagnum.cygnus.com)
+
+ * Makefile.in (srconv.o): Add dependence on sysroff.c.
+
+Tue Oct 4 12:19:51 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
+
+ * configure.in: Use ${config_shell} when running config.bfd.
+
+ * Makefile.in (sysroff.h): Split target away from sysroff.c.
+ (srconv.o, sysdump.o): New targets.
+ (srconv, sysdump): Don't depend upon sysroff.c.
+
+Wed Sep 28 13:04:34 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
+
+ * Makefile.in (arparse.c): Don't ignore errors from mv.
+ (sysinfo.c): Likewise. Also, depend upon arparse.c, to prevent a
+ parallel make from trying to build both arparse.c and sysinfo.c
+ simultaneously.
+ (nlmheader.c): Similar change.
+ (arparse.h): Separate target from arparse.c, so that a parallel
+ make does not try to build both at once. Depend upon arparse.c.
+ (sysinfo.h): Similar change.
+
+ * objdump.c (disassemble_data): Pass the reloc buffer to free, not
+ the pointer used to loop over the relocs.
+
+Sat Sep 24 16:16:57 1994 Stan Shebs (shebs@andros.cygnus.com)
+
+ * objdump.c (disassemble_data): Cast result of xmalloc.
+
+Wed Sep 21 19:30:35 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
+
+ * objdump.c (sorted_syms, sorted_symcount): New global variables.
+ (objdump_print_address): Use sorted_syms and sorted_symcount
+ instead of syms and symcount.
+ (disassemble_data): Don't bother to get the relocs before looping
+ over the sections. Before filtering and sorting the symbol table,
+ copy it into sorted_syms.
+
Fri Sep 16 11:27:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* objdump.c (struct objdump_disasm_info): Add field require_sec.
projects / deliverable / binutils-gdb.git / blobdiff