For Sega/Hitachi, when simulator exits, check to see if it was because
[deliverable/binutils-gdb.git] / binutils / ChangeLog
index 4afd7cb6caeb8886632575427e13f2bf5a308d0d..3ff0644f33e7a9d237f3b916471c162a0a1d785c 100644 (file)
@@ -1,3 +1,860 @@
+Fri Aug 11 18:27:18 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * nm.c (main): Ignore -e.
+
+Thu Aug 10 17:35:00 1995  Ken Raeburn  <raeburn@cygnus.com>
+
+       * Makefile.in (config.texi): New target.  Write out a setting for
+       texinfo variable VERSION.
+       (binutils.dvi, binutils.info): Depend on it.
+       * binutils.texi: Include it, and reference @value{VERSION} instead
+       of explicitly specifying 2.2(!).
+
+Thu Aug 10 16:07:53 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * coffgrok.c (do_type): Handle array dimensions the same way gdb
+       does.
+
+Tue Aug  8 17:10:42 1995  steve chamberlain  <sac@slash.cygnus.com>
+
+       * dlltool.c (mtable): New fields.
+       (ASM_RVA_BEFORE, ASM_RVA_AFTER): New.
+       (flush_page): Use new macros.
+
+Sat Aug  5 00:16:37 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+       * objcopy.c (mark_symbols_used_in_relocations): Handle sections
+       with no relocations.
+       * coffgrok.c (do_sections_p1): Likewise.
+
+Mon Jul 31 12:51:06 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * strings.c (print_strings): For compatibility with existing
+       strings programs, print strings which are not terminated with a
+       null byte or a newline.
+       * binutils.texi, strings.1: Update documentation accordingly.
+
+       * ar.c (replace_members): For compatibility with existing ar
+       programs, permit users to add the same file multiple times.
+
+Tue Jul 25 11:21:53 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * strings.c (DATA_FLAGS): Remove SEC_DATA.
+       (main): If no file names are given, scan standard input.
+       * binutils.texi, strings.1: strings now scans non-data sections by
+       default.
+
+Mon Jul 24 13:52:28 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+       * srconv.c (wr_hd): Set afl field to 4 for bfd_arch_sh.
+       (writeINT): When size == -2, use 2 bytes for the h8300 and 4 bytes 
+       for the sh.
+
+       * sysdump.c (fillup): Return size - 1, the last byte is a checksum
+       and shouldn't be counted.
+       * sysroff.info (hd): Changed segment identifier from a byte to a 1
+       bit field.  The sysroff 2.0-01 specification seems to be in error
+       here.  Reduce width of following "spare" field from 4 to 3 bits.
+       (rl): Changed order and width of first 4 bitfields to correspond
+       to sysroff specification.
+       (dln_head, dln_inside, dln_tail): Removed.
+
+Tue Jul 18 23:00:03 1995  Fred Fish  <fnf@cygnus.com>
+
+       * nm.c (sort_symbols_by_size):  Enclose expression being casted
+       in parens so result is casted, not just first operand.  Can't
+       do pointer arithmetic on void* pointers.
+
+Fri Jul 14 13:42:42 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+       * sysdump.c (dh): Changed format of output to be 16 hex digits
+       followed by 16 ascii characters, similar to Emacs' hexl-mode,
+       to make it easier to read.
+       (xcalloc): fix typo.
+
+Thu Jul 13 15:27:44 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+       * srconv.c (wr_tr): Write out handcrafted tr block.
+       (walk_tree_symbol): Use evallen and evalue instead of
+       vallen & value because of corresponding changes in
+       sysroff.info.
+
+       * sysdump.c (sysroff_swap_tr_in, sysroff_print_tr_out): New
+       functions.
+
+       * sysroff.info (tr): the tr block is a special case --- a block
+       without contents --- which can't be handled by generated code.
+       (den, dpp): only first byte is present for DENend, DPPend.
+       (dsy): describe a conditional portion of block, rename some fields.
+       (dps): describe a conditional portion of block.
+       (dfl): removed.
+
+       * sysinfo.y (yyerror): write error message to standard error.
+
+Thu Jul 13 10:43:59 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * Makefile.in (DISTSTUFF): Add arparse.h and sysinfo.h.
+       (mostlyclean): Remove y.output.
+       (clean): Remove sysroff, sysroff.c, sysroff.h, and sysinfo.
+
+       * nlmconv.c (powerpc_mangle_relocs): Cast memset arg to size_t.
+       * objcopy.c (copy_object): Likewise.
+
+       * nm.c (HAVE_SBRK): Define execpt on amigados and WINDOWS_NT.
+       (struct size_sym): Define.
+       (show_stats): New static variable.
+       (long_options): Add undocumented option "stats".
+       (main): Print memory stats if requested.
+       (sort_bfd, sort_dynamic, sort_x, sort_y): New static variables.
+       (numeric_forward): Use minisymbols rather than asymbols.
+       (non_numeric_forward): Likewise.
+       (size_forward1): Rename from size_forward.  Use minisymbols.
+       (size_forward2): New static function.
+       (sort_symbols_by_size): Take new arguments dynamic, size, and
+       symsizep.  Use minisymbols.  Don't store the size back in the
+       symbol; store in a newly allocate struct size_sym array.
+       (display_rel_file): Read minisymbols rather than asymbols.  Set
+       sort_* variables.  Call print_size_symbols if sorting by size.
+       (filter_symbols): Take new arguments dynamic and size.  Use
+       minisymbols.
+       (print_symbols): Likewise.  Call print_symbol for actual printing.
+       (print_size_symbols): New static function.
+       (print_symbol): New static function.
+
+Wed Jul 12 10:43:05 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * objdump.c (dump_section_stabs): Only print each stabs section
+       once.
+       (compare_relocs): Make it clear to gcc that this always returns a
+       value.
+
+Wed Jul 12 10:40:23 1995  H.J. Lu  <hjl@nynexst.com>
+
+       * objcopy.c (simple_copy): Preserve errno on failure.
+       (smart_rename): Print error mesage if simple_copy fails.
+
+Tue Jul 11 13:10:52 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+       * sysdump.c: re-indented file.  
+       (module): read blocks sequentially instead of trying to parse
+       them, as that would require changing the parser recognize the
+       difference between a DPSstart and DPSend block.
+       (getone): Add break's between switch blocks as appropriate.
+       (object_body_list): parse blocks according to sysroff spec.
+
+Mon Jul 10 12:37:25 1995  J.T. Conklin  <jtc@poseidon.cygnus.com>
+
+       * sysroff.info: re-indented file, prior formatting was confusing
+       because it was indentation did not reflect nesting of conditional
+       records.  Change "space size within segment" record in hd record
+       from bit to byte.
+
+       * sysinfo.y (cond_it_field): Use xcalloc instead of calloc.
+
+       * srconv.c (wr_cs): Reformatted cs header array, tag each byte
+       with a comment describing the field.
+       (wr_unit_info): Use SEEK_SET macro instead of constant 0.
+       (main): Use FOPEN_WB macro instead of literal "wb".
+       * sysroff.info: Remove fdl (dfl) field from cs block.  Compare
+       ptr->type with ED_TYPE_CONST instead of constant 2 in ed block.
+
+Tue Jul  4 14:48:42 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * nm.c (size_forward): Check yf against yn, not xn.
+
+       * objcopy.c (copy_archive): Record all output BFD's, and close
+       them before unlinking them and removing the temporary directory,
+       to avoid NFS problems.
+
+       * ar.c (replace_members): In verbose messages, use 'r' when
+        replacing a member, and 'a' when adding one.
+
+       * ar.c (ar_truncate): New static variable.
+       (normalize): Change return type to const char *.  Add abfd
+       argument.  Change all callers.  If ar_truncate, chop the filename
+       to abfd->ar_max_namelen.
+       (main): For the 'f' modifier, set ar_truncate to true.  Don't
+       change quick_append to replace if ar_truncate is true.
+       (do_quick_append): If ar_truncate, set BFD_TRADITIONAL_FORMAT.
+       (write_archive): Likewise.
+       * binutils.texi, ar.1: Document 'f' modifier.
+
+       * objcopy.c (enum strip_action): Define strip_unneeded.
+       (OPTION_STRIP_UNNEEDED): Define.
+       (strip_options): Add "strip-unneeded".
+       (copy_options): Likewise.
+       (copy_usage): Mention --strip-unneeded.
+       (strip_usage): Likewise.
+       (is_strip_section): Strip debugging sections if strip_unneeded.
+       (filter_symbols): If strip_unneeded, only keep BSF_KEEP symbols.
+       (copy_object): If strip_all, discard symbols without checking
+       discard_locals.
+       (copy_object): Call filter_symbols if strip_unneeded.
+       (setup_section): Strip debugging sections if strip_unneeded.
+       (copy_section): Likewise.
+       (strip_main): Handle OPTION_STRIP_UNNEEDED.
+       (copy_main): Likewise.
+       * binutils.texi, objcopy.1, strip.1: Document --strip-unneeded.
+
+Mon Jul  3 14:16:47 1995  Steve Chamberlain  <sac@slash.cygnus.com>
+
+       * configure.in (i386-*-win32): New configuration.
+       * dlltool.c (killat, xlate, usage, long_options, main): 
+       Understand and cope with -k option.
+
+Sat Jul  1 12:25:15 1995  Fred Fish  <fnf@cygnus.com>
+
+       * ar.c: (extract_file):  Change "#if POSIX_UTIME" to
+       "#ifdef POSIX_UTIME" to match other tests of POSIX_UTIME
+       and avoid lossage when POSIX_UTIME is not defined at all.
+
+Wed Jun 28 17:51:24 1995  Steve Chamberlain  <sac@slash.cygnus.com>
+
+       * ar.c: (print_contents.c, extract_file, do_quick_append):
+       Malloc buffers rather than allocate on stack (so it works
+       on NT).
+       * deflex.l: Names can have an @ in them.
+       * dlltool.c: Loads of stuff. Can now generate .imp files which
+       work with NT .dlls.
+
+Thu Jun 22 19:10:50 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+       * mpw-make.in (demangle.c.o): Remove.
+       (arparse.h): Depend on arparse.c instead of arparse.y.
+
+Wed Jun 21 17:32:45 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
+
+       * Makefile.in (DISTSTUFF): Don't include info here.
+       (diststuff): Include it here.
+       (realclean): Remove *.info.
+
+       * objdump.c (compare_relocs): If relocation entries have the same
+       address, keep them in file order.
+
+Mon Jun 19 09:06:49 1995  Steve Chamberlain  <sac@slash.cygnus.com>
+
+       * dlltool.c: Change names of generated files. .*.s-> -*.s
+
+       * objdump.c (dump_section_stabs):  Check for names
+       which are supersets of selected names.
+
+Wed Jun 14 19:43:52 1995  Doug Evans  <dje@canuck.cygnus.com>
+
+       * dlltool.c (mtable, ARM jump): Must redirect via pc offsetable ptr.
+
+Wed Jun 14 13:27:22 1995  Steve Chamberlain  <sac@slash.cygnus.com>
+
+       * deflex.l, defparse.y, dlltool.c: New files.
+       * Makefile.in, configure.in: Support for them.
+
+Mon Jun 12 11:27:54 1995  Steve Chamberlain  <sac@slash.cygnus.com>
+
+       * sysdump.c: Include sysdep.h
+       (main): Open input with FOPEN_RB.
+
+Fri Jun  9 17:26:11 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+       * objdump.c (wide_output): New flag variable.
+       (usage): Print new -w, --wide options.
+       (long_options): Add --wide support.
+       (dump_section_header): If --wide, don't print a newline between
+       the section's first line and the flags.
+       (objdump_print_address): Use unsigned comparisons for the binary
+       search, not signed.
+       (disassemble_data): If --wide, don't put a \n between the
+       disassembly output and relocation information.
+       (main): Support -w option being the same as --wide.
+
+Thu Jun  1 17:09:27 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
+
+       Sat May  6 08:52:24 1995  H.J. Lu (hjl@nynexst.com)
+
+       * objcopy.c (smart_rename): make it smarter, clean up
+         if rename () fails.
+
+Tue May 30 14:24:15 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
+
+       * Makefile.in: Delete lines with lots of #### because four or more
+       indicate a point for makefile fragment substitution.
+
+Tue May  9 17:17:05 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+       * configure.in: Don't build nlmconv on PowerPC eabi any more, it
+       is not needed.
+
+Thu Apr 27 20:21:24 1995  Doug Evans  <dje@canuck.cygnus.com>
+
+       * Makefile.in (EXPECT): Define.
+       (RUNTEST): Use one in source tree if present.
+       (check): Set `rootme' for $(EXPECT).
+
+Wed Apr 26 18:26:21 1995  Steve Chamberlain  <sac@slash.cygnus.com>
+
+       * srconv.c (main): Add support for -n option which disables
+       prescan of common symbols.
+       (wr_ob): If reading past the end of a section, fill with zeros.
+
+Tue Apr 25 19:14:37 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
+
+       * objdump.c (dump_section_header): Display load address after
+       virtual memory (run-time) address.
+
+Wed Apr 19 09:44:06 1995  Jason Merrill  <jason@phydeaux.cygnus.com>
+
+       * Makefile.in (cplus-dem.o): Pass -DVERSION='"$(VERSION)"' to the
+        compile.
+       (DEMANGLER_PROG): No longer uses version.o.
+
+Mon Apr 10 13:29:49 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+       Merge in support for Mac MPW as a host.
+       (Old change descriptions retained for informational value.)
+
+       * mpw-config.in (TDEFINES): Define as empty in makefile frag.
+
+       * mpw-config.in: Create mk.tmp, define ARCHDEFS in it.
+
+       * mpw-config.in: New file, MPW configure fragment for binutils.
+       * mpw-make.in (install-only): New target.
+       (install): Also depend on install-only.
+
+       * mpw-make.in (cplusfilt): Renamed from c++filt.
+       (INCLUDES): Add more paths.
+
+       * mpw-make.in: New file, MPW makefile fragment for binutils.
+       (Normally automatically generated from Makefile.in.)
+
+Mon Mar 27 11:52:57 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * ar.c (write_archive): Call make_tempname to get output file
+       name, rather than using a fixed name based on the input file.
+
+       * objcopy.c (make_tempname): Copy from here...
+       * bucomm.c (make_tempname): ...to here, and make global.
+       * bucomm.h (make_tempname): Declare.
+
+Fri Mar 24 11:47:42 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * strings.c: Include "bfd.h" before other headers.  Include
+       "sysdep.h".
+       * bucomm.c (print_arelt_descr): Cast st_uid and st_gid to long,
+       and print them with %ld.
+
+Fri Mar 10 13:09:42 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * objcopy.c (strip_options): Add --keep-symbol.
+       (copy_options): Likewise.
+       (copy_usage): Mention --keep-symbol and -K.
+       (strip_usage): Likewise.
+       (keep_symbols): New static variable.
+       (is_strip_symbol): Adjust the return value according to
+       keep_symbols.
+       (strip_main): Handle -K.  For -N, check that -K was not given.
+       (copy_main): Likewise.
+       * binutils.texi, objcopy.1, strip.1: Document -K.
+
+Mon Mar  6 13:33:47 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+       * objcopy.c (copy_archive): Check result of mkdir.
+       (copy_main): Cast an xmalloc result.
+
+       * objdump.c (usage): Break long format string into shorter ones.
+
+Mon Mar  6 13:46:12 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * bucomm.c (list_supported_targets): New function.
+       * bucomm.h (list_supported_targets): Declare.
+       * ar.c (usage): Call list_supported_targets.
+       * nm.c (usage): Likewise.
+       * objcopy.c (copy_usage, strip_usage): Likewise.
+       * objdump.c (usage): Likewise.
+       * size.c (usage): Likewise.
+       * strings.c (usage): Likewise.
+
+Tue Feb 28 15:13:58 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * bucomm.c (print_arelt_descr): Cast st_size to long before
+       passing it to fprintf.
+
+Fri Feb 17 13:36:45 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * objcopy.c (struct section_list): Add fields remove, set_flags,
+       and flags.  Change adjust from boolean to enum.
+       (remove_sections): Remove static variable.
+       (sections_removed): New static variable.
+       (copy_options): Add --set-section-flags.
+       (copy_usage): Mention --set-section-flags.
+       (parse_flags): New static function.
+       (find_section_list): New static function.
+       (is_strip_symbol): Change return type from int to boolean.
+       (is_strip_section): New static function.
+       (filter_symbols): Call is_strip_section.
+       (copy_object): When adding sections, check for specified flags or
+       VMA.  Call filter_symbols if any sections are being removed.
+       (setup_section): Use find_section_list function rather than
+       looking through remove_sections and adjust_sections.  Handle
+       --set-section-flags.
+       (copy_section): Use find_section_list rather than looking through
+       remove_sections.
+       (strip_main): Use find_section_list instead of adding items to
+       sections_removed.
+       (copy_main): Use find_section_list instead of adding items to
+       sections_removed and adjust_sections.  Handle --set-section-flags.
+       * binutils.texi, objcopy.1: Document --set-section-flags.
+
+Tue Feb 14 18:03:03 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * objdump.c (with_source_code): New global variable.
+       (usage): Mention -S/--source.
+       (long_options): Add --source.
+       (prev_functionname, prev_line): New static variables.
+       (struct print_file_list): Define.
+       (print_files): New static variable.
+       (skip_to_line, show_line): New static functions.
+       (disassemble_data): Call show_line to handle -l and -S.
+       (main): Handle -S.
+       * binutils.texi, objdump.1: Document -S/--source.
+
+Thu Feb  9 16:11:53 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * objcopy.c (copy_usage): Rename parameter to avoid shadowing.
+       (strip_usage): Likewise.
+
+       * objcopy.c (struct section_add): Define.
+       (add_sections): New static variable.
+       (copy_options): Accept --add-section.
+       (copy_usage): Mention --add-section.
+       (copy_object): Add sections from the add_sections list.
+       (copy_main): Handle --add-section.
+       * binutils.texi, objcopy.1: Document --add-section.
+
+Wed Feb  1 15:04:57 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
+
+       * objdump.c (disassemble_data): Pass section offset, not absolute
+       address, to bfd_find_nearest_line.
+
+       * nlmconv.c (powerpc_mangle_relocs): Don't use const with
+       reloc_howto_type.
+
+Thu Jan 26 18:50:06 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+       * objdump.c (compare_symbols): Use bfd_asymbol_value (VAR) rather
+       than VAR->value.
+       (objdump_print_address): Likewise.
+       (disassemble_data): Don't change the symbol values.  It can
+       confuse bfd_canonicalize_reloc.
+
+Thu Jan 26 12:03:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+       * configure.in: Add support for powerpc-*-ebai.
+
+Wed Jan 18 10:02:12 1995  Steve Chamberlain  <sac@splat>
+
+       * coffdump.c: Include sysdep.h.
+       (dump_coff_type): Handle coff_secdef_type.
+       * coffgrok.c : Include sysdep.h.
+       * srconv.c: Include libiberty.h
+       (absolute_p, dty_start, dty_end, dump_tree_structure): Remove.
+
+Wed Jan 18 12:24:14 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+       * coffdump.c (dump_coff_scope): Cast pointer to unsigned long for
+       printf.
+       * coffgrok.c: Include bucomm.h.  Don't declare xmalloc.
+       (push_scope): Declare type of parameter link.
+       * size.c: Include libiberty.h.
+       * srconv.c: Include bucomm.h.
+       (find_base): Declare at top of file.
+       (wr_hd): Add default case to architecture switch.
+       (wr_dps_start): Declare type of parameter nest.
+       (wr_du): Comment out variables used only in commented out blocks.
+       (wr_dus): Remove unused variable i.
+       (wr_sc): Remove unused variables myinfo, low, and high.
+       * strings.c: Include libiberty.h.
+       * sysdump.c: Include <ctype.h>.
+
+Tue Dec 20 19:13:44 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+       * ar.c (main): Ignore 'f' modifier used on HP/UX 9.
+
+Thu Dec 15 17:34:12 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+       * ar.c, nm.c, objcopy.c, objdump.c: Include progress.h.
+       * ar.c, nm.c, objcopy.c, objdump.c (main): Add START_PROGRESS
+       and END_PROGRESS.
+       * ar.c (map_over_members, open_inarch): Call PROGRESS.
+       * nm.c (main, display_archive, filter_symbols, print_symbols):
+       Call PROGRESS.
+
+       * objcopy.c (copy_usage): Break up long usage string.
+
+Wed Dec 14 15:51:56 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
+
+       * objcopy.c (copy_object): Don't bother setting status after
+       nonfatal() "call", because it won't return.
+
+Fri Dec  9 00:22:54 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+       * nlmconv.c (powerpc_mangle_relocs): Don't switch a reloc to use
+       the section symbol if the symbol is undefined.
+
+Thu Dec  8 14:45:50 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
+
+       * objcopy.c (add_strip_symbol): Cast return value of xmalloc.
+
+Wed Nov 30 11:05:43 1994  Ian Lance Taylor  <ian@rtl.cygnus.com>
+
+       * ar.c (replace_members): Pass current->filename to normalize when
+       checking for duplicates, because the filename of a newly added
+       file will not have been normalized yet.
+
+Thu Nov 17 15:00:13 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+       * ar.c (main): Don't call do_quick_append if any of the archive
+       names are longer than 14 characters.
+
+       * objcopy.c (main): Fix is_strip test.  From
+       pirker@eiunix.tuwien.ac.at (Martin Pirker).
+
+Thu Nov 17 15:37:19 1994  Mark W. Eichin  <eichin@cygnus.com>
+
+       * objcopy.c (add_strip_symbol): New function, adds a name to an
+       explicit list of symbols to strip.
+       (is_strip_symbol): New function, reports whether the name argument
+       is in the explicit list.
+       (filter_symbols): Check against is_strip_symbol above all.
+       (strip_main): Recognize -N option. If used, don't default to
+       strip_all.
+       (copy_main): Recognize -N option.
+       (strip_usage): Document -N and --strip-symbol options.
+       (copy_usage): Ditto.
+       * objcopy.1, strip.1, binutils.texi: Document -N and
+       --strip-symbol options.
+
+Tue Nov  8 13:12:54 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+       * objdump.c (display_target_list, display_info_table): Pass an
+       array to tmparg, rather than NULL, since some systems can't handle
+       NULL.
+
+       * objcopy.c (copy_archive): Keep a list of the names of the
+        temporary files we created.  Close each input BFD after we open
+        its successor.
+
+Mon Nov  7 15:48:39 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
+
+       * Makefile.in (VERSION): Bump to 2.5.3.
+
+Thu Nov  3 19:04:34 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
+
+       * Makefile.in (install-info): Install info files from whatever
+       directory they were found in.
+
+       Patch from DJ Delorie:
+       * configure.bat: do c++filt -> cxxfilt right
+
+       * sysinfo.y: Include system header files early, so any potential
+       declaration of abort() occurs before its use.
+
+       * strings.c (strings_file): Try opening the file in binary mode
+       first.
+
+Wed Nov  2 15:44:13 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+       * ar.c (main): Treat ar qs like ar rs.
+
+Tue Oct 25 16:19:25 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+       * objcopy.c (gap_fill): Explicitly initialize, for clarity.
+       (pad_to_set, pad_to): New static variables.
+       (copy_options): Accept --pad-to.
+       (copy_usage): Mention --pad-to.
+       (copy_object): Support --pad-to.
+       (compare_section_vma): Sort non loadable sections to the front.
+       Sort sections with the same VMA by size.
+       (copy_main): Handle --pad-to.
+       * binutils.texi, objcopy.1: Document --pad-to.
+
+Thu Oct 20 13:51:31 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+       * objcopy.c (gap_fill_set, gap_fill): New static variables.
+       (copy_options): Accept --gap-fill.
+       (copy_usage): Mention --gap-fill.
+       (copy_object): Support --gap-fill.
+       (get_sections, compare_section_vma): New static functions.
+       (copy_main): Handle --gap-fill.
+       * binutils.texi, objcopy.1: Document --gap-fill.
+
+Wed Oct 19 14:09:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+       * Makefile.in (check): Add a dummy else clause to the if
+       statement.
+
+       * objcopy.c (copy_object): Revert yesterday's change.
+       * binutils.texi, objcopy.1: Remove special mention of --set-start
+       and `binary' output format.
+
+Tue Oct 18 11:12:01 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+       * objcopy.c (copy_object): If the output file format is `binary',
+       and the start address was not set using --set-start, default the
+       start address to zero.  This hack is because the `binary' output
+       file format uses the start address to set the virtual address of
+       the first byte in the file.
+       * binutils.texi, objcopy.1: Add some notes on generating S-records
+       and binary files.
+
+       * nm.c (print_symdef_entry): Call print_symname to print the
+       symbol name, so that --demangle works.
+
+       * Makefile.in (mostlyclean): Remove tmpdir.
+
+       * objcopy.c (struct section_list): Add fields used, adjust, val.
+       (adjust_start, set_start_set, set_start): New static variables.
+       (adjust_section_vma, adjust_sections): New static variables.
+       (copy_options): Add --adjust-start, --adjust-vma,
+       --adjust-section-vma, --adjust-warnings, --no-adjust-warnings,
+       --set-start.
+       (parse_vma): New static function.
+       (copy_usage): Mention new options.
+       (copy_object): Handle --set-start and --adjust-start.
+       (setup_section): Correct type of last argument to PTR.  Set used
+       field if section is removed.  Handle --adjust-vma and
+       --adjust-section-vma.
+       (copy_section): Correct type of last argument to PTR.
+       (mark_symbols_used_in_relocations): Likewise.
+       (strip_main): Clear used field when handling -R.
+       (copy_main): Handle new options.
+       * binutils.texi (objcopy): Document new options.
+       * objcopy.1: Document new options.
+
+Fri Oct 14 14:38:13 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+       * configure.in (configdirs): Remove definition--testsuite is no
+       longer configured.
+       * Makefile.in (testsuite): Remove target.
+       (site.exp): New target.
+       (check): Rewrite.
+       (clean, distclean): Don't recur into testsuite directory.
+
+Thu Oct 13 19:24:09 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
+
+       * Makefile.in (VERSION): Updated to 2.5.
+       * Version 2.5 released.
+
+Tue Oct 11 15:26:42 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+       * Makefile.in (sysdump.o): Depends upon sysroff.c.
+
+Mon Oct 10 13:50:30 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
+
+       * nlmconv.c (link_inputs): Pass -Ur flag to ld so that the
+         ctor/dtor tables needed by C++ programs are built.
+
+Sun Oct  9 18:04:00 1994  Jim Wilson  (wilson@sphagnum.cygnus.com)
+
+       * Makefile.in (srconv.o): Add dependence on sysroff.c.
+
+Tue Oct  4 12:19:51 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+       * configure.in: Use ${config_shell} when running config.bfd.
+
+       * Makefile.in (sysroff.h): Split target away from sysroff.c.
+       (srconv.o, sysdump.o): New targets.
+       (srconv, sysdump): Don't depend upon sysroff.c.
+
+Wed Sep 28 13:04:34 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+       * Makefile.in (arparse.c): Don't ignore errors from mv.
+       (sysinfo.c): Likewise.  Also, depend upon arparse.c, to prevent a
+       parallel make from trying to build both arparse.c and sysinfo.c
+       simultaneously.
+       (nlmheader.c): Similar change.
+       (arparse.h): Separate target from arparse.c, so that a parallel
+       make does not try to build both at once.  Depend upon arparse.c.
+       (sysinfo.h): Similar change.
+
+       * objdump.c (disassemble_data): Pass the reloc buffer to free, not
+       the pointer used to loop over the relocs.
+
+Sat Sep 24 16:16:57 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+       * objdump.c (disassemble_data): Cast result of xmalloc.
+
+Wed Sep 21 19:30:35 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+       * objdump.c (sorted_syms, sorted_symcount): New global variables.
+       (objdump_print_address): Use sorted_syms and sorted_symcount
+       instead of syms and symcount.
+       (disassemble_data): Don't bother to get the relocs before looping
+       over the sections.  Before filtering and sorting the symbol table,
+       copy it into sorted_syms.
+
+Fri Sep 16 11:27:39 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+       * objdump.c (struct objdump_disasm_info): Add field require_sec.
+       (objdump_print_address): If aux->require_sec, require that the
+       symbol be in aux->sec even if HAS_RELOC is not set.  If we can't
+       find a smaller symbol in the right section, look for a larger one.
+       (disassemble_data): Set aux.require_sec around the
+       objdump_print_address call for the instruction address.
+
+Thu Sep 15 21:43:17 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+       * ar.c: Call xexit rather than exit.
+       (output_filename, output_file, output_bfd): New static variables.
+       (remove_output): New static function.
+       (main): Call xatexit (remove_output).  Call xexit rather than
+       returning.
+       (extract_file): Set output_filename and output_file while output
+       file is open.
+       (write_archive): Likewise, but use output_bfd, not output_file.
+       * arsup.c: Include libiberty.h.  Call xexit rather than exit.
+       * bucomm.c: Likewise.
+
+       * objdump.c (disassemble_all): New global variable.
+       (usage): Document --disassemble-all.
+       (long_options): Add disassemble-all as a synonym for -D.
+       (compare_symbols): Make pointers const.
+       (compare_relocs): New static function.
+       (disassemble_data): Rename disassemble to disassemble_fn to avoid
+       shadowing.  If dump_reloc_info, print relocs along with
+       disassembly.  Skip sections which are not SEC_CODE unless
+       disassemble_all or only is set.
+       (display_bfd): Don't call dump_relocs if disassemble is set.
+       (main): Accept and handle -D.
+       * binutils.texi: Document -D/--disassemble-all.
+       * objdump.1: Likewise.
+
+Wed Sep 14 12:19:07 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+       * objdump.c (disassemble_data): Initialize prevline to 0.  Make
+       prev_function non const.  Copy functionname into an malloc buffer
+       when setting prev_function, instead of assuming that the string
+       will last forever.
+
+       * nm.c: Include libiberty.h.
+       (sort_by_size): New static variable.
+       (long_options): Add --size-sort.
+       (usage): Mention --size-sort.
+       (numeric_forward): Make static.  Change from void * to PTR.
+       (numeric_reverse): Likewise.
+       (non_numeric_forward, non_numeric_reverse): Likewise.
+       (sorters): Change declaration from void * to PTR.
+       (size_forward, sort_symbol_by_size): New static functions.
+       (display_rel_file): Handle sort_by_size.
+       (filter_symbols): If sort_by_size, discard absolute and undefined
+       symbols.
+       * binutils.texi (nm): Document --size-sort.
+       * nm.1: Document --size-sort.
+
+Tue Sep 13 21:06:06 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+       * objcopy.c (copy_main): Initialize input_filename and
+       output_filename to NULL.
+
+Tue Sep 13 14:17:24 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+       * Makefile.in (version.o): Depend upon Makefile, so that version.o
+       gets rebuilt when make variable VERSION is changed.
+
+       * objdump.c (dump_section_header): Print the SEC_NEVER_LOAD flag.
+
+Wed Aug 24 12:40:09 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+       * configure.in: Change i[34]86 to i[345]86.
+
+Tue Aug 23 11:00:40 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+       * ar.c (ranlib_touch): Don't update the archive map if there isn't
+       one.
+
+Mon Aug 22 16:02:18 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+       * ar.c: Include libiberty.h.
+       (inarch): Remove variable.
+       (map_over_members): Make static.  Add arch argument, and use it
+       instead of inarch.  Change all callers.
+       (main): Treat --version as -v.  Accept -t argument.  Accept any
+       number of archive arguments.  Catch and use open_inarch return
+       value, rather than using inarch.
+       (open_inarch): Return newly opened BFD, rather than using inarch.
+       (do_quick_append): Make archive_filename const.
+       (write_archive): Add iarch argument, and use it instead of inarch.
+       Change all callers.
+       (delete_members, move_members, replace_members): Likewise.
+       (ranlib_only): Don't exit on success.  Catch and use open_inarch
+       return value.
+       (ranlib_touch): New function.
+       * arsup.h (map_over_members): Don't declare.
+       (ar_end, ar_extract): Declare.
+       (open_inarch): Change return value in declaration to bfd *.
+       * arsup.c (map_over_list): Make static. Always pass two arguments
+       to function.  Add arch argument, and use it instead of inarch.
+       Change all callers.
+       (ar_directory_doer): Make static.  Add ignored second argument.
+       Change all callers.
+       (ar_directory): Use open_inarch return value rather than inarch.
+       (ar_addlib_doer): Make static.
+       (ar_addlib): Use open_inarch return value rather than inarch.
+       (ar_extract): Remove unused local variable abfd.
+
+Thu Aug 11 14:55:57 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+       Add support for removing named sections to objcopy and strip.
+       * objcopy.c (struct section_list): Define.
+       (remove_sections): New static variable.
+       (strip_options, copy_options): Add remove-section.
+       (copy_usage, strip_usage): Mention -R and --remove-section.
+       (setup_section): If section is in remove_sections list, ignore it.
+       (copy_section): Likewise.
+       (strip_main, copy_main): Handle -R.
+       * binutils.texi, objcopy.1, strip.1: Document new options.
+
+Wed Aug 10 10:19:55 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+       * nlmconv.c (powerpc_mangle_relocs): Rename symvalue to sym_value,
+       so as not to conflict with the symvalue typedef in bfd.h.
+
+Mon Aug  1 13:19:09 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+       * nlmheader.y: Per current NetWare docs, accept a revision number
+       of 0 and treat a revision number greater than 26 as 0.
+
+Mon Jul 25 12:58:36 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+       * objdump.c (objdump_print_address): Correct handling of end of
+       symbols when looking for next symbol with a different value.
+
+Fri Jul 22 16:48:34 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
+
+       * nm.c (numeric_forward): Treat undefined symbols as "less than"
+       defined symbols with zero values.  If numeric values are equal, or
+       both symbols are undefined, sort alphabetically.  Don't assume
+       that the difference of two bfd_vma values will truncate to "int"
+       and still have the same sign.
+       (numeric_reverse): Call numeric_forward and negate the result.
+       (print_symbol_info_bsd): For undefined symbols, print leading
+       spaces equivalent to the width of a printed bfd_vma, rather than
+       assuming that 8 will look right.
+
+Fri Jul 22 10:36:50 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+       * coffgrok.c (doit):  Zero all fields of new structure. 
+       * srconv.c (sysroff_swap_*_out): Remove redundant trailing arg. 
+       * sysinfo.y: Generate sysroff_swap_*_out without requiring extra
+       arg.
+
+Fri Jul 22 10:09:53 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+       * nlmheader.y: Make "stack" and "stacksize" synonyms in the lexer
+         rather than the parser.
+
+Thu Jul 21 10:25:09 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+       * config/mh-alphaosf, config/mh-apollo68v, config/mh-delta88:
+       Remove; obsolete.
+
 Sat Jul 16 22:34:39 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 
        * objdump.c (slurp_dynamic_symtab): Try to get the dynamic symbols
This page took 0.031486 seconds and 4 git commands to generate.