# Makefile for GNU binary-file utilities
-# Copyright (C) 1989-1991 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.
# This file is part of GNU binutils.
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#$Id$
-
srcdir = .
-ddestdir = /usr/local
-idestdir = $(ddestdir)
+prefix = /usr/local
+
+program_transform_name =
+exec_prefix = $(prefix)
+bindir = $(exec_prefix)/bin
+libdir = $(exec_prefix)/lib
+tooldir = $(exec_prefix)/$(target_alias)
+
+datadir = $(prefix)/lib
+mandir = $(prefix)/man
+man1dir = $(mandir)/man1
+man2dir = $(mandir)/man2
+man3dir = $(mandir)/man3
+man4dir = $(mandir)/man4
+man5dir = $(mandir)/man5
+man6dir = $(mandir)/man6
+man7dir = $(mandir)/man7
+man8dir = $(mandir)/man8
+man9dir = $(mandir)/man9
+infodir = $(prefix)/info
+includedir = $(prefix)/include
+docdir = $(datadir)/doc
SHELL = /bin/sh
-MAKEINFO=makeinfo
+
+INSTALL = `cd $(srcdir)/..;pwd`/install.sh -c
+INSTALL_PROGRAM = $(INSTALL)
+INSTALL_DATA = $(INSTALL)
+INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)'
+INSTALL_XFORM1 = $(INSTALL_XFORM) -b=.1
+
+AR = ar
+AR_FLAGS = qv
+CFLAGS = -g
+MAKEINFO = makeinfo
+TEXI2DVI = texi2dvi
+RANLIB = ranlib
+BISONFLAGS = -d
+TEXI2ROFF=texi2roff
+MAKEOVERRIDES=
+
+NM_FOR_TARGET = nm
+NM = $(NM_FOR_TARGET)
+SYMLINK = ln -s
+
+BISON = `if [ -f ../byacc/byacc ] ; then echo ../byacc/byacc ; else echo byacc ; fi`
+# Comment these out if using lex.
+LEX_OPTIONS = -I -Cem
+LEX = `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo flex ; fi`
# Distribution version
-VERSION=1.91
+VERSION=cygnus-2.3.1
# Distribution name
-DIST_NAME=binutils-beta-${VERSION}
+DIST_NAME=binutils-${VERSION}
-version=`$(unsubdir)/../gcc$(subdir)/gcc -dumpversion`
-prefix = $(ddestdir)
-bindir = $(prefix)/bin
-mandir = $(idestdir)/man
+version=`./../gcc/gcc -dumpversion`
# Where to find texinfo.tex to format docn with TeX
-TEXIDIR = $(srcdir)/../texinfo/fsf
+TEXIDIR = $(srcdir)/../texinfo
-MANPAGES= ar.1 nm.1 objdump.1 ranlib.1 size.1 strip.1
-
-#INSTALL = install -c
-#INSTALL_PROGRAM = $(INSTALL)
-#INSTALL_FILE = $(INSTALL)
+MANPAGES= ar nm objdump ranlib size strings strip c++filt objcopy nlmconv
#CC=gcc -Wall
# these two are almost the same program
AR_PROG=ar
RANLIB_PROG=ranlib
-# copy and strip should be the same program
-COPY_PROG=copy
+# objcopy and strip should be the same program
+OBJCOPY_PROG=objcopy
STRIP_PROG=strip
+STRINGS_PROG=strings
+
# These should all be the same program too.
SIZE_PROG=size
NM_PROG=nm
OBJDUMP_PROG=objdump
-PROGS = $(SIZE_PROG) $(COPY_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRIP_PROG) $(RANLIB_PROG)
+# This is the demangler, as a standalone program.
+DEMANGLER_PROG=c++filt
+
+NLMCONV_PROG=nlmconv
+
+PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) $(BUILD_NLMCONV)
STAGESTUFF = $(PROGS) *.o
+# Files that can be generated, but should be in the distribution.
+DISTSTUFF=arparse.c arlex.c nlmheader.c info
BASEDIR = $(srcdir)/..
-LIBDIR = $(unsubdir)/../bfd$(subdir)
+BFDDIR = $(BASEDIR)/bfd
+INCDIR = $(BASEDIR)/include
+INCLUDES = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR)
-MINUS_G = -g
#### host and target dependant Makefile fragments come in here.
###
-INCDIR = $(BASEDIR)/include
+ALL_CFLAGS = $(INCLUDES) $(HDEFINES) $(TDEFINES) $(CFLAGS)
-CFLAGS = $(MINUS_G) -I. -I$(srcdir) -I$(INCDIR) $(HDEFINES) $(TDEFINES)
-
-# When adding .o files, to make VPATH work in Sun Make, you have to
-# also add a foo.o: foo.c line at the bottom of the file.
-DISASMS = m68k-pinsn.o i960-pinsn.o sparc-pinsn.o am29k-pinsn.o
+.c.o:
+ $(CC) -c $(ALL_CFLAGS) $<
#\f
## Random definitions
# fail unnecessarily. I've also seen some Unix malloc's fail, even when
# there is enough memory. So use the new GNU malloc.
# MALLOC = gmalloc.o
+# Use this if the system malloc is good enough.
+MALLOC =
# Use the GNU getopt unless you have problems with it.
# The IRIS version could probably benefit from being assembled with
# libmalloc rather than the ordinary malloc.
-LIBIBERTY = $(unsubdir)/../libiberty$(subdir)/libiberty.a
+LIBIBERTY = ../libiberty/libiberty.a
# Code shared by all the binutils.
BULIBS = bucomm.o version.o filemode.o
-ADDL_LIBS = $(MALLOC) $(BULIBS) $(BFD) $(LIBIBERTY)
+ADDL_LIBS = $(MALLOC) $(BULIBS) $(BFD) $(LIBIBERTY)
+
+BFD = ../bfd/libbfd.a
+OPCODES = ../opcodes/libopcodes.a
+
+RUNTEST = runtest
+RUNTESTFLAGS =
+FLAGS_TO_PASS = \
+ "CC=$(CC)" \
+ "CFLAGS=$(CFLAGS)" \
+ "RUNTEST=$(RUNTEST)" \
+ "RUNTESTFLAGS=$(RUNTESTFLAGS) \
+ SIZE=`if [ -f $$rootme/$(SIZE_PROG) ] ; then echo $$rootme/$(SIZE_PROG) ; else echo $(SIZE_PROG); fi` \
+ OBJCOPY=`if [ -f $$rootme/$(OBJCOPY_PROG) ] ; then echo $$rootme/$(OBJCOPY_PROG) ; else echo $(OBJCOPY_PROG); fi` \
+ NM=`if [ -f $$rootme/$(NM_PROG) ] ; then echo $$rootme/$(NM_PROG) ; else echo $(NM_PROG); fi` \
+ AR=`if [ -f $$rootme/$(AR_PROG) ] ; then echo $$rootme/$(AR_PROG) ; else echo $(AR_PROG); fi` \
+ OBJDUMP=`if [ -f $$rootme/$(OBJDUMP_PROG) ] ; then echo $$rootme/$(OBJDUMP_PROG) ; else echo $(OBJDUMP_PROG); fi` \
+ STRINGS=`if [ -f $$rootme/$(STRINGS_PROG) ] ; then echo $$rootme/$(STRINGS_PROG) ; else echo $(STRINGS_PROG); fi` \
+ STRIP=`if [ -f $$rootme/$(STRIP_PROG) ] ; then echo $$rootme/$(STRIP_PROG) ; else echo $(STRIP_PROG); fi` \
+ RANLIB=`if [ -f $$rootme/$(RANLIB_PROG) ] ; then echo $$rootme/$(RANLIB_PROG) ; else echo $(RANLIB_PROG); fi` \
+ DEMANGLE=`if [ -f $$rootme/$(DEMANGLER_PROG) ] ; then echo $$rootme/$(DEMANGLER_PROG) ; else echo $(DEMANGLER_PROG); fi`"
-BFD = $(LIBDIR)/libbfd.a
#\f
## The rules
-all: $(ADDL_LIBS) $(PROGS) binutils.info
+all: $(ADDL_LIBS) $(PROGS)
+
+testsuite:
+ if [ -f testsuite/Makefile.in ]; then \
+ (rootme=`pwd`/ ; export rootme ; \
+ rootsrc=`cd $(srcdir); pwd`/ ; export rootsrc ; \
+ cd testsuite; $(MAKE) FLAGS_TO_PASS=$(FLAGS_TO_PASS)); \
+ else true ; fi
-#$(BFD):$(LIBDIR)/../common/*.c
-# (cd $(LIBDIR); make)
+check: force
+ rootme=`pwd`; export rootme; cd testsuite ; \
+ $(MAKE) check $(FLAGS_TO_PASS)
+# /bin/sh $(srcdir)/sanity.sh .
+
+installcheck:
+ /bin/sh $(srcdir)/sanity.sh $(bindir)
+
+info: binutils.info
+
+dvi: binutils.dvi
$(SIZE_PROG): $(ADDL_LIBS) size.o $(BFD)
- $(CC) $(LDFLAGS) $(CFLAGS) -o $(SIZE_PROG) size.o $(ADDL_LIBS) $(LOADLIBES)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(SIZE_PROG) size.o $(ADDL_LIBS) $(EXTRALIBS)
+
+$(OBJCOPY_PROG): $(ADDL_LIBS) objcopy.o not-strip.o $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o not-strip.o $(ADDL_LIBS) $(EXTRALIBS)
+
+$(STRINGS_PROG): $(ADDL_LIBS) strings.o $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(STRINGS_PROG) strings.o $(ADDL_LIBS) $(EXTRALIBS)
+
+$(STRIP_PROG): $(ADDL_LIBS) objcopy.o is-strip.o $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(STRIP_PROG) objcopy.o is-strip.o $(ADDL_LIBS) $(EXTRALIBS)
+
+$(NM_PROG): $(ADDL_LIBS) nm.o demangle.o $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(NM_PROG) nm.o demangle.o $(ADDL_LIBS) $(EXTRALIBS)
+
+$(OBJDUMP_PROG): $(ADDL_LIBS) objdump.o $(BFD) $(OPCODES)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(OBJDUMP_PROG) objdump.o $(OPCODES) $(ADDL_LIBS) $(EXTRALIBS)
-$(COPY_PROG): $(ADDL_LIBS) copy.o $(BFD)
- $(CC) $(LDFLAGS) $(CFLAGS) -o $(COPY_PROG) copy.o $(ADDL_LIBS) $(LOADLIBES)
+objdump.o: objdump.c config.status
+ $(CC) -c $(INCLUDES) $(HDEFINES) $(TDEFINES) $(ARCHDEFS) $(CFLAGS) $(srcdir)/objdump.c
-$(NM_PROG): $(ADDL_LIBS) nm.o $(BFD)
- $(CC) $(LDFLAGS) $(CFLAGS) -o $(NM_PROG) nm.o $(ADDL_LIBS) $(LOADLIBES)
+underscore.c:
+ echo "int xxy_us_dummy;" >dummy.c
+ $(CC) -c dummy.c
+ rm -f underscore.c
+ echo '/*WARNING: This file is automatically generated!*/' >underscore.c
+ if [ "`$(NM) dummy.o | grep _xxy_us_dummy ; true`" != "" ]; then \
+ echo "int prepends_underscore = 1;" >>underscore.c; \
+ else \
+ echo "int prepends_underscore = 0;" >>underscore.c; \
+ fi
+ -rm -f dummy.c dummy.o
-$(OBJDUMP_PROG): $(ADDL_LIBS) size.o objdump.o $(DISASMS) $(BFD)
- $(CC) $(LDFLAGS) $(CFLAGS) -o $(OBJDUMP_PROG) objdump.o $(DISASMS) $(ADDL_LIBS) $(LOADLIBES)
+version.o: version.c
+ $(CC) $(INCLUDES) $(HDEFINES) $(TDEFINES) -DVERSION='"$(VERSION)"' $(CFLAGS) -c $(srcdir)/version.c
+
+demangle.o: $(BASEDIR)/libiberty/cplus-dem.c
+ $(CC) -c $(INCLUDES) $(HDEFINES) $(TDEFINES) $(CFLAGS) $(BASEDIR)/libiberty/cplus-dem.c
+ mv cplus-dem.o demangle.o
+
+# For parallel compiling, depend on demangle.o so that one gets done first.
+cplus-dem.o: $(BASEDIR)/libiberty/cplus-dem.c $(INCDIR)/getopt.h demangle.o
+ $(CC) -c -DMAIN $(INCLUDES) $(HDEFINES) $(TDEFINES) $(CFLAGS) $(BASEDIR)/libiberty/cplus-dem.c
+
+$(DEMANGLER_PROG): cplus-dem.o $(LIBIBERTY) underscore.o version.o
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(DEMANGLER_PROG) cplus-dem.o $(LIBIBERTY) $(EXTRALIBS) underscore.o version.o
-$(AR_PROG): $(ADDL_LIBS) ar.o not-ranlib.o $(BFD)
- $(CC) $(LDFLAGS) $(CFLAGS) -o $(AR_PROG) ar.o not-ranlib.o $(ADDL_LIBS) $(LOADLIBES)
+arparse.h arparse.c: arparse.y
+ $(BISON) $(BISONFLAGS) $(srcdir)/arparse.y
+ -mv y.tab.c arparse.c
+ -mv y.tab.h arparse.h
-$(RANLIB_PROG): $(ADDL_LIBS) ar.o is-ranlib.o $(BFD)
- $(CC) $(LDFLAGS) $(CFLAGS) -o $(RANLIB_PROG) ar.o is-ranlib.o $(ADDL_LIBS) $(LOADLIBES)
+arlex.c: arlex.l
+ $(LEX) $(LEX_OPTIONS) $(srcdir)/arlex.l
+ mv lex.yy.c arlex.c
+
+$(AR_PROG): $(ADDL_LIBS) ar.o arparse.o arlex.o not-ranlib.o $(BFD) arsup.o
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o arparse.o arlex.o arsup.o not-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
+
+$(RANLIB_PROG): $(ADDL_LIBS) ar.o is-ranlib.o arparse.o arlex.o arsup.o $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(RANLIB_PROG) ar.o arparse.o arlex.o arsup.o is-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
# This rule creates a single binary that switches between ar and ranlib
# by looking at argv[0]. Use this kludge to save some disk space.
# Alternatively, you can install ranlib.sh as ranlib.
ar_with_ranlib: $(ADDL_LIBS) ar.o maybe-ranlib.o $(BFD)
- $(CC) $(LDFLAGS) $(CFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(LOADLIBES)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
-rm -f $(RANLIB_PROG)
-ln $(AR_PROG) $(RANLIB_PROG)
-$(STRIP_PROG): $(COPY_PROG)
+# objcopy and strip in one binary that uses argv[0] to decide its action.
+
+objcopy_with_strip: $(ADDL_LIBS) objcopy.o maybe-strip.o $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
-rm -f $(STRIP_PROG)
- -ln $(COPY_PROG) $(STRIP_PROG)
+ -ln $(OBJCOPY_PROG) $(STRIP_PROG)
+
+nlmheader.c: nlmheader.y
+ $(BISON) $(srcdir)/nlmheader.y
+ rm -f nlmheader.c
+ -mv y.tab.c nlmheader.c
+
+nlmconv.o: nlmconv.c
+ ldname=`t='$(program_transform_name)'; echo ld | sed -e "" $$t`; \
+ $(CC) -c -DLD_NAME="\"$${ldname}\"" $(INCLUDES) $(HDEFINES) $(TDEFINES) $(CFLAGS) $(srcdir)/nlmconv.c
+
+$(NLMCONV_PROG): nlmconv.o nlmheader.o $(ADDL_LIBS) $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ nlmconv.o nlmheader.o $(ADDL_LIBS) $(EXTRALIBS)
+
+# This list of dependencies was generated by doing a make with gcc -MM
+# saving the output in a file and removing the gcc commands
+# changing "../../devo/binutils/../bfd" to "$(BFDDIR)"
+# removing "../../devo/binutils/"
+# changing "../include" to "$(INCDIR)"
+
+bucomm.o: bucomm.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
+ $(INCDIR)/fopen-same.h bucomm.h
+filemode.o: filemode.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
+ $(INCDIR)/fopen-same.h
+size.o: size.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
+ $(INCDIR)/fopen-same.h $(INCDIR)/getopt.h
+objdump.o: objdump.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
+ $(INCDIR)/fopen-same.h $(INCDIR)/getopt.h \
+ $(INCDIR)/dis-asm.h $(INCDIR)/aout/aout64.h \
+ $(INCDIR)/elf/internal.h $(INCDIR)/aout/stab.def
+nm.o: nm.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
+ $(INCDIR)/fopen-same.h bucomm.h $(INCDIR)/getopt.h \
+ $(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def \
+ $(INCDIR)/aout/ranlib.h $(INCDIR)/demangle.h
+ar.o: ar.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
+ $(INCDIR)/fopen-same.h bucomm.h $(INCDIR)/aout/ar.h \
+ $(BFDDIR)/libbfd.h arsup.h
+arparse.o: arparse.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h arsup.h
+arlex.o: arlex.c ./arparse.h
+not-ranlib.o: not-ranlib.c
+arsup.o: arsup.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h arsup.h bucomm.h
+strings.o: strings.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h bucomm.h
+objcopy.o: objcopy.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
+ $(INCDIR)/fopen-same.h bucomm.h
+is-strip.o: is-strip.c
+is-ranlib.o: is-ranlib.c
+not-strip.o: not-strip.c
+nlmheader.o: nlmheader.c nlmconv.h $(INCDIR)/nlm/common.h \
+ $(INCDIR)/nlm/internal.h
+nlmconv.o: $(INCDIR)/nlm/common.h $(INCDIR)/nlm/internal.h \
+ $(BFDDIR)/libnlm.h bucomm.h
stage1: force
- mkdir stage1
# DOCUMENTATION TARGETS
# TeX output
binutils.dvi: $(srcdir)/binutils.texi
- TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex $(srcdir)/binutils.texi
- texindex binutils.??
- TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex $(srcdir)/binutils.texi
+ TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/binutils.texi
# info file for online browsing
binutils.info: $(srcdir)/binutils.texi
$(MAKEINFO) -o binutils.info $(srcdir)/binutils.texi
# different targets for -ms, -mm, -me
-# (we don't use a variable because we don't trust all makes to handle
-# a var in the target name right).
+# Try to use a recent texi2roff. v2 was put on prep in jan91.
+# If you want an index, see texi2roff doc for postprocessing
+# and add -i to texi2roff invocations below.
+# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
+# corresponding -e lines when later texi2roff's are current)
+# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
+# + @c's deleted explicitly because texi2roff sees texinfo commands in them
+# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
+# + @alphaenumerate is ridiculously new, turned into @enumerate
+
# roff output (-ms)
binutils.ms: $(srcdir)/binutils.texi
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
+ -e '/^@ifinfo/,/^@end ifinfo/d' \
+ -e '/^@c/d' \
-e 's/{.*,,/{/' \
+ -e 's/@ / /g' \
+ -e 's/^@alphaenumerate/@enumerate/g' \
+ -e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/binutils.texi | \
- texi2roff -ms >binutils.ms
+ $(TEXI2ROFF) -ms | \
+ sed -e 's/---/\\(em/g' \
+ >binutils.ms
# roff output (-mm)
+# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
+# try leaving them in
binutils.mm: $(srcdir)/binutils.texi
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
+ -e '/^@ifinfo/,/^@end ifinfo/d' \
+ -e '/^@c/d' \
-e 's/{.*,,/{/' \
-e '/@noindent/d' \
+ -e 's/@ / /g' \
+ -e 's/^@alphaenumerate/@enumerate/g' \
+ -e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/binutils.texi | \
- texi2roff -mm | \
+ $(TEXI2ROFF) -mm | \
sed -e 's/---/\\(em/g' \
>binutils.mm
binutils.me: $(srcdir)/binutils.texi
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
+ -e '/^@ifinfo/,/^@end ifinfo/d' \
+ -e '/^@c/d' \
-e 's/{.*,,/{/' \
+ -e 's/@ / /g' \
+ -e 's/^@alphaenumerate/@enumerate/g' \
+ -e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/binutils.texi | \
- texi2roff -me >binutils.me
+ $(TEXI2ROFF) -me | \
+ sed -e 's/---/\\(em/g' \
+ >binutils.me
######################################################################
-clean:
- -rm -f *.o *~ \#* core $(STAGESTUFF) TAGS binutils.?? binutils.???
+mostlyclean:
+ -rm -f *.o *~ \#* core binutils.?? binutils.???
+clean: mostlyclean
+ @if [ -d testsuite ] ; then \
+ cd testsuite ; $(MAKE) $(FLAGS_TO_PASS) clean ; \
+ else true; fi
+ -rm -f $(PROGS) underscore.c
+distclean:
+ @if [ -d testsuite ] ; then \
+ cd testsuite ; $(MAKE) $(FLAGS_TO_PASS) distclean ; \
+ else true; fi
+ -rm -f Makefile config.status sysdep.h *.o *~ \#* core \
+ binutils.?? binutils.??s binutils.aux binutils.log binutils.toc
+realclean: clean distclean
+ -rm -f $(DISTSTUFF) TAGS
etags tags: TAGS
TAGS: force
- etags $(INCDIR)/*.h $(BFDSRC)/*.[hc] *.[hc]
+ etags $(INCDIR)/*.h $(srcdir)/*.[hc]
-realclean: clean
- -rm -f $(STAGESTUFF) TAGS
-
-install: $(PROGS)
+install: all
for i in $(PROGS) ; do \
- (cp $$i $(bindir)/$$i.new \
- && mv -f $(bindir)/$$i.new $(bindir)/$$i) \
- || exit 1 ; \
+ $(INSTALL_XFORM) $$i $(bindir)/$$i ; \
done
for i in $(MANPAGES) ; do \
- (cp $(srcdir)/$$i $(mandir)/man1/$$i.new \
- && mv -f $(mandir)/man1/$$i.new $(mandir)/man1/$$i) \
- || exit 1 ; \
+ $(INSTALL_XFORM1) $(srcdir)/$$i.1 $(man1dir)/$$i.1 ; \
done
- for i in *.info* ; do \
- (cp $$i $(idestdir)/info/$$i.new \
- && mv -f $(idestdir)/info/$$i.new $(idestdir)/info/$$i) \
- || exit 1 ; \
+ -if [ -d $(tooldir) ]; then \
+ if [ -d $(tooldir)/bin ] ; then true ; else mkdir $(tooldir)/bin ; fi; \
+ for i in nm strip ar ranlib; do \
+ rm -f $(tooldir)/bin/$$i; \
+ ln $(bindir)/`t='$(program_transform_name)'; echo $$i | sed -e "" $$t` $(tooldir)/bin/$$i \
+ || $(INSTALL_PROGRAM) $$i $(tooldir)/bin/$$i; \
+ done; \
+ else true; fi
+
+# Use binutils.info as the target so that VPATH will DTRT.
+# (Use "$<*" in case the output is multiple files, though.)
+install-info: binutils.info
+ for i in $<* ; do \
+ $(INSTALL_DATA) $$i $(infodir)/$$i ; \
done
-dist: $(DIST_NAME).tar.Z
+clean-info:
+ -rm -rf *.info*
+
+# Making a dist:
+# cvs rtag binutils-x-yy ld+utils
+# cvs co -r binutils-x-yy ld+utils
+# Sanitize
+# cd {HERE}; make dist [-f Makefile.in]
-$(DIST_NAME).tar.Z:
+dist: $(DIST_NAME).tar.z
+
+diststuff: $(DISTSTUFF)
+
+$(DIST_NAME).tar.z:
cd ../..; rm -f $(DIST_NAME); ln -s devo $(DIST_NAME)
- make binutils.mm -f Makefile.in
- cd ../ld; make ld.mm -f Makefile.in
- cd ../..; tar chf - $(DIST_NAME) | compress >$(DIST_NAME).tar.Z
+ make diststuff -f Makefile.in
+ cd ../ld; make diststuff -f Makefile.in
+ cd ../gprof; make diststuff -f Makefile.in
+ cd ../texinfo; mv texinfo.tex ..; rm -rf *; mv ../texinfo.tex .
+ # Take out texinfo from configurable dirs
+ mv ../configure.in tmp; \
+ sed -e '/^host_tools=/s/texinfo //' <tmp >../configure.in; rm tmp
+ cd ..; chmod og=u `find . -print`
+ cd ../..; tar chf - $(DIST_NAME) | gzip >$(DIST_NAME).tar.z
rm -rf ../../$(DIST_NAME)
-# These get around a bug in Sun Make in SunOS 4.1.1
-alloca.o:alloca.c
-am29k-pinsn.o: am29k-pinsn.c
-ar.o: ar.c
-bucomm.o: bucomm.c
-copy.o: copy.c
-cplus-dem.o:cplus-dem.c
-filemode.o:filemode.c
-getopt.o:getopt.c
-getopt1.o:getopt1.c
-gmalloc.o:gmalloc.c
-i960-pinsn.o: i960-pinsn.c
-is-ranlib.o:is-ranlib.c
-m68k-pinsn.o: m68k-pinsn.c
-maybe-ranlib.o:maybe-ranlib.c
-nm.o: nm.c
-not-ranlib.o:not-ranlib.c
-objdump.o: objdump.c
-size.o: size.c
-sparc-pinsn.o: sparc-pinsn.c
-strip.o:strip.c
-version.o: version.c
-
#-----------------------------------------------------------------------------
# 'STANDARD' GNU/960 TARGETS BELOW THIS POINT
#
projects / deliverable / binutils-gdb.git / blobdiff