-### Makefile for GNU binary-file utilities
-
-#$Id$
+# Makefile for GNU binary-file utilities
+# Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.
+
+# This file is part of GNU binutils.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
srcdir = .
-## Configuration options
-# These should be all you need set before compiling
+prefix = /usr/local
+
+program_transform_name =
+exec_prefix = $(prefix)
+bindir = $(exec_prefix)/bin
+libdir = $(exec_prefix)/lib
+tooldir = $(exec_prefix)/$(target_alias)
+
+datadir = $(prefix)/lib
+mandir = $(prefix)/man
+man1dir = $(mandir)/man1
+man2dir = $(mandir)/man2
+man3dir = $(mandir)/man3
+man4dir = $(mandir)/man4
+man5dir = $(mandir)/man5
+man6dir = $(mandir)/man6
+man7dir = $(mandir)/man7
+man8dir = $(mandir)/man8
+man9dir = $(mandir)/man9
+infodir = $(prefix)/info
+includedir = $(prefix)/include
+docdir = $(datadir)/doc
+
+SHELL = /bin/sh
+
+INSTALL = `cd $(srcdir)/..;pwd`/install.sh -c
+INSTALL_PROGRAM = $(INSTALL)
+INSTALL_DATA = $(INSTALL)
+INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)'
+INSTALL_XFORM1 = $(INSTALL_XFORM) -b=.1
+
+AR = ar
+AR_FLAGS = qv
+CFLAGS = -g
+MAKEINFO = makeinfo
+TEXI2DVI = texi2dvi
+RANLIB = ranlib
+BISONFLAGS = -d
+TEXI2ROFF=texi2roff
+MAKEOVERRIDES=
+CC_FOR_BUILD = $(CC)
+NM_FOR_TARGET = nm
+NM = $(NM_FOR_TARGET)
+SYMLINK = ln -s
+
+BISON = `if [ -f ../bison/bison ] ; then echo ../bison/bison -y -L../bison/bison ; else echo bison -y ; fi`
+# Comment these out if using lex.
+LEX_OPTIONS = -I -Cem
+LEX = `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo flex ; fi`
+
+# Distribution version
+VERSION=cygnus-2.5
+# Distribution name
+DIST_NAME=binutils-${VERSION}
+
+version=`./../gcc/gcc -dumpversion`
+
+# Where to find texinfo.tex to format docn with TeX
+TEXIDIR = $(srcdir)/../texinfo
#CC=gcc -Wall
-# these two should be the same program
+CC=cc
+# these two are almost the same program
AR_PROG=ar
RANLIB_PROG=ranlib
-# copy and strip should be the same program
-COPY_PROG=copy
-STRIP_PROG=strip
+# objcopy and strip should be the same program
+OBJCOPY_PROG=objcopy
+STRIP_PROG=strip.new
+
+STRINGS_PROG=strings
# These should all be the same program too.
SIZE_PROG=size
-NM_PROG=nm
+NM_PROG=nm.new
OBJDUMP_PROG=objdump
-PROGS = $(SIZE_PROG) $(COPY_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRIP_PROG) $(RANLIB_PROG)
-
-#CC = gcc -Wall
-#CC=gcc
-BASEDIR = $(srcdir)/..
-# Let rich do this for now:
-LIBDIR = $(srcdir)/../bfd
-
-#__dgux__#DEFINES=-DHOST_SYS=DGUX_SYS
+# This is the demangler, as a standalone program.
+# Note: This one is used as the installed name too, unlike the above.
+DEMANGLER_PROG=c++filt
-#__sun3__#DEFINES=-DHOST_SYS=SUN3_SYS
-#__sun3__#LDFLAGS= -Bstatic
+NLMCONV_PROG=nlmconv
-#__sun4__#DEFINES=-DHOST_SYS=SUN4_SYS
-#__sun4__#LDFLAGS= -Bstatic
+SRCONV_PROG=srconv sysdump coffdump
-#__sun386i__#LDFLAGS = -Bstatic
+MANPAGES= ar nm objdump ranlib size strings strip objcopy nlmconv
-#__rs6000__#DEFINES=-Daix
-#__rs6000__#ALLOCA = alloca.o
+PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) $(BUILD_NLMCONV) $(BUILD_SRCONV) $(SYSINFO_PROG)
+STAGESTUFF = $(PROGS) *.o
+# Files that can be generated, but should be in the distribution.
+DISTSTUFF=arparse.c arlex.c nlmheader.c sysinfo.c syslex.c info
-#__i386v__#ALLOCA = alloca.o
-#__i386v__#DEFINES=-DUSG
+# Stuff that goes in tooldir/ if appropriate
+TOOL_PROGS = nm.new strip.new ar ranlib
+BASEDIR = $(srcdir)/..
+BFDDIR = $(BASEDIR)/bfd
+INCDIR = $(BASEDIR)/include
+INCLUDES = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR)
#### host and target dependant Makefile fragments come in here.
###
-INCDIR = $(BASEDIR)/include-cygnus
-
-CFLAGS = -g -I$(INCDIR) $(DEFINES) $(CDEFINES)
-
+ALL_CFLAGS = $(INCLUDES) $(HDEFINES) $(TDEFINES) $(CFLAGS)
-bindir=$(BASEDIR)/bin
+.c.o:
+ $(CC) -c $(ALL_CFLAGS) $<
-DISASMS = m68k-pinsn.o i960-pinsn.o sparc-pinsn.o
#\f
## Random definitions
# Hopefully all these may be flushed once we get configuration down pat.
# fail unnecessarily. I've also seen some Unix malloc's fail, even when
# there is enough memory. So use the new GNU malloc.
# MALLOC = gmalloc.o
+# Use this if the system malloc is good enough.
+MALLOC =
# Use the GNU getopt unless you have problems with it.
# The IRIS version could probably benefit from being assembled with
# libmalloc rather than the ordinary malloc.
-GNU_GETOPT = getopt.o $(ALLOCA)
-GNU_GETOPT_LONG = getopt1.o $(GNU_GETOPT)
-
-
-
+LIBIBERTY = ../libiberty/libiberty.a
# Code shared by all the binutils.
BULIBS = bucomm.o version.o filemode.o
-ADDL_LIBS = $(GNU_GETOPT_LONG) $(MALLOC) $(BULIBS)
+ADDL_LIBS = $(MALLOC) $(BULIBS) $(BFD) $(LIBIBERTY)
+
+BFD = ../bfd/libbfd.a
+OPCODES = ../opcodes/libopcodes.a
+
+RUNTEST = runtest
+RUNTESTFLAGS =
+FLAGS_TO_PASS = \
+ "CC=$(CC)" \
+ "CFLAGS=$(CFLAGS)" \
+ "RUNTEST=$(RUNTEST)" \
+ "RUNTESTFLAGS=$(RUNTESTFLAGS)"
-BFD = $(LIBDIR)/libbfd.a
#\f
## The rules
-all: $(ADDL_LIBS) $(PROGS)
+all: $(ADDL_LIBS) $(PROGS)
+
+# These targets are for the dejagnu testsuites. The file site.exp
+# contains global variables that all the testsuites will use.
+
+site.exp: ./config.status Makefile
+ @echo "Making a new config file..."
+ @rm -f ./tmp?
+ @touch site.exp
+ @mv site.exp site.bak
+ @echo "## variables are automatically generated by make ##" > ./tmp0
+ @echo "# Do not edit here. If you wish to override these" >> ./tmp0
+ @echo "# values, add them to the last section" >> ./tmp0
+ @echo "# HOST AND TARGET INFO" >> ./tmp0
+ @echo "set host_os $(host_os)" >> ./tmp0
+ @echo "set host_alias $(host_alias)" >> ./tmp0
+ @echo "set host_cpu $(host_cpu)" >> ./tmp0
+ @echo "set host_vendor $(host_vendor)" >> ./tmp0
+ @echo "set target_os $(target_os)" >> ./tmp0
+ @echo "set target_alias $(target_alias)" >> ./tmp0
+ @echo "set target_cpu $(target_cpu)" >> ./tmp0
+ @echo "set target_vendor $(target_vendor)" >> ./tmp0
+ @echo "set host_triplet $(host_canonical)" >> ./tmp0
+ @echo "set target_triplet $(target_canonical)" >> ./tmp0
+ @echo "# DIRECTORY INFO" >> ./tmp0
+ @echo "set objdir `pwd`" >> ./tmp0
+ @echo "" >> ./tmp0
+ @echo "## Variables generated by configure. Do Not Edit ##" >> ./tmp0
+ @cat ./tmp0 > site.exp
+ @cat site.bak | sed \
+ -e '1,/^## Variables generated by.*##/ d' >> site.exp
+ -@rm -f ./tmp?
+
+check: site.exp
+ r=`pwd`; export r; \
+ srcroot=`cd ${srcdir}; pwd` ; export srcroot ; \
+ EXPECT=${EXPECT} ; export EXPECT ; \
+ if [ -f $$r/../expect/expect ] ; then \
+ TCL_LIBRARY=$${srcroot}/../tcl/library ; \
+ export TCL_LIBRARY ; else true; fi ; \
+ $(RUNTEST) --tool binutils --srcdir $(srcdir)/testsuite \
+ $(RUNTESTFLAGS)
+
+installcheck:
+ /bin/sh $(srcdir)/sanity.sh $(bindir)
+
+info: binutils.info
+
+dvi: binutils.dvi
+$(SIZE_PROG): $(ADDL_LIBS) size.o $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(SIZE_PROG) size.o $(ADDL_LIBS) $(EXTRALIBS)
-#$(BFD):$(LIBDIR)/../common/*.c
-# (cd $(LIBDIR); make)
+$(OBJCOPY_PROG): $(ADDL_LIBS) objcopy.o not-strip.o $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o not-strip.o $(ADDL_LIBS) $(EXTRALIBS)
-$(SIZE_PROG): $(ADDL_LIBS) size.o $(BFD)
- $(CC) $(LDFLAGS) $(CFLAGS) -o $(SIZE_PROG) size.o $(ADDL_LIBS) $(BFD)
+$(STRINGS_PROG): $(ADDL_LIBS) strings.o $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(STRINGS_PROG) strings.o $(ADDL_LIBS) $(EXTRALIBS)
-$(COPY_PROG): $(ADDL_LIBS) copy.o $(BFD)
- $(CC) $(LDFLAGS) $(CFLAGS) -o $(COPY_PROG) copy.o $(ADDL_LIBS) $(BFD)
+$(STRIP_PROG): $(ADDL_LIBS) objcopy.o is-strip.o $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(STRIP_PROG) objcopy.o is-strip.o $(ADDL_LIBS) $(EXTRALIBS)
$(NM_PROG): $(ADDL_LIBS) nm.o $(BFD)
- $(CC) $(LDFLAGS) $(CFLAGS) -o $(NM_PROG) nm.o $(MALLOC) $(ADDL_LIBS) $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(NM_PROG) nm.o $(ADDL_LIBS) $(EXTRALIBS)
+
+$(OBJDUMP_PROG): $(ADDL_LIBS) objdump.o $(BFD) $(OPCODES)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(OBJDUMP_PROG) objdump.o $(OPCODES) $(ADDL_LIBS) $(EXTRALIBS)
+
+underscore.c: Makefile
+ rm -f underscore.c
+ echo '/*WARNING: This file is automatically generated!*/' >underscore.t
+ echo "int prepends_underscore = $(UNDERSCORE);" >>underscore.t
+ mv -f underscore.t underscore.c
+
+version.o: version.c Makefile
+ $(CC) $(INCLUDES) $(HDEFINES) $(TDEFINES) -DVERSION='"$(VERSION)"' $(CFLAGS) -c $(srcdir)/version.c
+
+cplus-dem.o: $(BASEDIR)/libiberty/cplus-dem.c $(INCDIR)/getopt.h
+ $(CC) -c -DMAIN $(INCLUDES) $(HDEFINES) $(TDEFINES) $(CFLAGS) $(BASEDIR)/libiberty/cplus-dem.c
-$(OBJDUMP_PROG): $(ADDL_LIBS) size.o objdump.o $(DISASMS) $(BFD)
- $(CC) $(LDFLAGS) $(CFLAGS) -o $(OBJDUMP_PROG) objdump.o $(DISASMS) $(ADDL_LIBS) $(BFD)
+$(DEMANGLER_PROG): cplus-dem.o $(LIBIBERTY) underscore.o version.o
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(DEMANGLER_PROG) cplus-dem.o $(LIBIBERTY) $(EXTRALIBS) underscore.o version.o
-$(AR_PROG): $(ADDL_LIBS) ar.o $(BFD)
- $(CC) $(LDFLAGS) $(CFLAGS) -o $(AR_PROG) ar.o $(MALLOC) $(ADDL_LIBS) $(BFD)
+arparse.c: arparse.y
+ $(BISON) $(BISONFLAGS) $(srcdir)/arparse.y
+ mv -f y.tab.c arparse.c
+ mv -f y.tab.h arparse.h
-$(RANLIB_PROG): $(AR_PROG)
+# Separate from arparse.c so that a parallel make doesn't try to build
+# both arparse.c and arparse.h simultaneously.
+arparse.h: arparse.c
+
+arlex.c: arlex.l
+ $(LEX) $(LEX_OPTIONS) $(srcdir)/arlex.l
+ mv lex.yy.c arlex.c
+
+$(AR_PROG): $(ADDL_LIBS) ar.o arparse.o arlex.o not-ranlib.o $(BFD) arsup.o
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o arparse.o arlex.o arsup.o not-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
+
+$(RANLIB_PROG): $(ADDL_LIBS) ar.o is-ranlib.o arparse.o arlex.o arsup.o $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(RANLIB_PROG) ar.o arparse.o arlex.o arsup.o is-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
+
+# This rule creates a single binary that switches between ar and ranlib
+# by looking at argv[0]. Use this kludge to save some disk space.
+# However, you have to install things by hand.
+# (That is after 'make install', replace the installed ranlib by a link to ar.)
+
+# Alternatively, you can install ranlib.sh as ranlib.
+
+ar_with_ranlib: $(ADDL_LIBS) ar.o maybe-ranlib.o $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
-rm -f $(RANLIB_PROG)
-ln $(AR_PROG) $(RANLIB_PROG)
-$(STRIP_PROG): $(COPY_PROG)
- -rm -f $(STRIP_PROG)
- -ln $(COPY_PROG) $(STRIP_PROG)
+# objcopy and strip in one binary that uses argv[0] to decide its action.
-clean:
- -rm -f *.o *~ \#* core $(PROGS) TAGS
+objcopy_with_strip: $(ADDL_LIBS) objcopy.o maybe-strip.o $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
+ -rm -f $(STRIP_PROG)
+ -ln $(OBJCOPY_PROG) $(STRIP_PROG)
+
+sysroff.c: sysinfo sysroff.info
+ ./sysinfo -c <$(srcdir)/sysroff.info >sysroff.c
+ ./sysinfo -i <$(srcdir)/sysroff.info >>sysroff.c
+ ./sysinfo -g <$(srcdir)/sysroff.info >>sysroff.c
+
+sysroff.h: sysinfo sysroff.info
+ ./sysinfo -d <$(srcdir)/sysroff.info >sysroff.h
+
+# Depend upon arparse.c to avoid building both arparse.c and sysinfo.c
+# simultaneously.
+sysinfo.c: sysinfo.y arparse.c
+ $(BISON) -tvd $(srcdir)/sysinfo.y
+ rm -f sysinfo.c
+ mv -f y.tab.c sysinfo.c
+ mv -f y.tab.h sysinfo.h
+
+# Separate from sysinfo.c so that a parallel make doesn't try to build
+# both sysinfo.c and sysinfo.h simultaneously.
+sysinfo.h: sysinfo.c
+
+syslex.c : syslex.l
+ $(LEX) $(LEX_OPTIONS) $(srcdir)/syslex.l
+ mv lex.yy.c syslex.c
+
+sysinfo: sysinfo.o syslex.o
+ $(CC_FOR_BUILD) $(CFLAGS) $(LDFLAGS) -o $@ sysinfo.o syslex.o
+
+syslex.o: syslex.c sysinfo.h
+ if [ -r syslex.c ]; then \
+ $(CC_FOR_BUILD) -c -I. $(CFLAGS) syslex.c ; \
+ else \
+ $(CC_FOR_BUILD) -c -I. $(CFLAGS) $(srcdir)/syslex.c ;\
+ fi
+
+sysinfo.o: sysinfo.c
+ if [ -r sysinfo.c ]; then \
+ $(CC_FOR_BUILD) -c -I. $(CFLAGS) sysinfo.c ; \
+ else \
+ $(CC_FOR_BUILD) -c -I. $(CFLAGS) $(srcdir)/sysinfo.c ; \
+ fi
+
+srconv.o: srconv.c sysroff.h sysroff.c coffgrok.h $(INCDIR)/coff/internal.h \
+ ../bfd/libcoff.h
+
+srconv: srconv.o coffgrok.o $(ADDL_LIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ srconv.o coffgrok.o $(ADDL_LIBS) $(EXTRALIBS)
+
+coffdump: coffdump.o coffgrok.o $(ADDL_LIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ coffdump.o coffgrok.o $(ADDL_LIBS) $(EXTRALIBS)
+
+sysdump.o: sysdump.c sysroff.h sysroff.c
+
+sysdump: sysdump.o $(ADDL_LIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ sysdump.o $(ADDL_LIBS) $(EXTRALIBS)
+
+# Depend upon sysinfo.c to avoid building both nlmheader.c and sysinfo.c
+# simultaneously.
+nlmheader.c: nlmheader.y sysinfo.c
+ $(BISON) $(srcdir)/nlmheader.y
+ rm -f nlmheader.c
+ mv -f y.tab.c nlmheader.c
+
+nlmconv.o: nlmconv.c
+ ldname=`t='$(program_transform_name)'; echo ld | sed -e "s/brokensed/brokensed/" $$t`; \
+ $(CC) -c -DLD_NAME="\"$${ldname}\"" $(INCLUDES) $(HDEFINES) $(TDEFINES) $(NLMCONV_DEFS) $(CFLAGS) $(srcdir)/nlmconv.c
+
+$(NLMCONV_PROG): nlmconv.o nlmheader.o $(ADDL_LIBS) $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ nlmconv.o nlmheader.o $(ADDL_LIBS) $(EXTRALIBS)
+
+# This list of dependencies was generated by doing a make with gcc -MM
+# saving the output in a file and removing the gcc commands
+# changing "../../devo/binutils/../bfd" to "$(BFDDIR)"
+# removing "../../devo/binutils/"
+# changing "../include" to "$(INCDIR)"
+
+bucomm.o: bucomm.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
+ $(INCDIR)/fopen-same.h bucomm.h
+filemode.o: filemode.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
+ $(INCDIR)/fopen-same.h
+size.o: size.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
+ $(INCDIR)/fopen-same.h $(INCDIR)/getopt.h
+objdump.o: objdump.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
+ $(INCDIR)/fopen-same.h $(INCDIR)/getopt.h \
+ $(INCDIR)/dis-asm.h $(INCDIR)/aout/aout64.h \
+ $(INCDIR)/elf/internal.h $(INCDIR)/aout/stab.def
+nm.o: nm.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
+ $(INCDIR)/fopen-same.h bucomm.h $(INCDIR)/getopt.h \
+ $(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def \
+ $(INCDIR)/aout/ranlib.h $(INCDIR)/demangle.h
+ar.o: ar.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
+ $(INCDIR)/fopen-same.h bucomm.h $(INCDIR)/aout/ar.h \
+ $(BFDDIR)/libbfd.h arsup.h
+arparse.o: arparse.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h arsup.h
+arlex.o: arlex.c ./arparse.h
+not-ranlib.o: not-ranlib.c
+arsup.o: arsup.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h arsup.h bucomm.h
+strings.o: strings.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h bucomm.h
+objcopy.o: objcopy.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
+ $(INCDIR)/fopen-same.h bucomm.h
+is-strip.o: is-strip.c
+is-ranlib.o: is-ranlib.c
+not-strip.o: not-strip.c
+nlmheader.o: nlmheader.c ../bfd/bfd.h ../bfd/sysdep.h \
+ $(BFDDIR)/hosts/std-host.h $(INCDIR)/fopen-same.h bucomm.h \
+ $(INCDIR)/nlm/common.h $(INCDIR)/nlm/internal.h nlmconv.h
+nlmconv.o: nlmconv.c ../bfd/bfd.h $(INCDIR)/libiberty.h ../bfd/sysdep.h \
+ $(BFDDIR)/hosts/std-host.h $(INCDIR)/fopen-same.h bucomm.h \
+ $(BFDDIR)/libnlm.h $(INCDIR)/nlm/common.h \
+ $(INCDIR)/nlm/internal.h $(INCDIR)/nlm/external.h nlmconv.h \
+ $(INCDIR)/coff/sym.h $(INCDIR)/coff/ecoff.h
+
+stage1: force
+ - mkdir stage1
+ - mv -f $(STAGESTUFF) stage1
+
+stage2: force
+ - mkdir stage2
+ - mv -f $(STAGESTUFF) stage2
+
+stage3: force
+ - mkdir stage3
+ - mv -f $(STAGESTUFF) stage3
+
+against=stage2
+
+comparison: force
+ for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
+
+de-stage1: force
+ - (cd stage1 ; mv -f * ..)
+ - rmdir stage1
+
+de-stage2: force
+ - (cd stage2 ; mv -f * ..)
+ - rmdir stage2
+
+de-stage3: force
+ - (cd stage3 ; mv -f * ..)
+ - rmdir stage3
+
+######################################################################
+# DOCUMENTATION TARGETS
+# TeX output
+binutils.dvi: $(srcdir)/binutils.texi
+ TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/binutils.texi
+
+# info file for online browsing
+binutils.info: $(srcdir)/binutils.texi
+ $(MAKEINFO) -o binutils.info $(srcdir)/binutils.texi
+
+$(DEMANGLER_PROG).1: cxxfilt.man Makefile
+ sed -e 's/@PROGRAM@/$(DEMANGLER_PROG)/' < $(srcdir)/cxxfilt.man \
+ > $(DEMANGLER_PROG).1
+
+# different targets for -ms, -mm, -me
+# Try to use a recent texi2roff. v2 was put on prep in jan91.
+# If you want an index, see texi2roff doc for postprocessing
+# and add -i to texi2roff invocations below.
+# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
+# corresponding -e lines when later texi2roff's are current)
+# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
+# + @c's deleted explicitly because texi2roff sees texinfo commands in them
+# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
+# + @alphaenumerate is ridiculously new, turned into @enumerate
+
+# roff output (-ms)
+binutils.ms: $(srcdir)/binutils.texi
+ sed -e '/\\input texinfo/d' \
+ -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
+ -e '/^@ifinfo/,/^@end ifinfo/d' \
+ -e '/^@c/d' \
+ -e 's/{.*,,/{/' \
+ -e 's/@ / /g' \
+ -e 's/^@alphaenumerate/@enumerate/g' \
+ -e 's/^@end alphaenumerate/@end enumerate/g' \
+ $(srcdir)/binutils.texi | \
+ $(TEXI2ROFF) -ms | \
+ sed -e 's/---/\\(em/g' \
+ >binutils.ms
+
+# roff output (-mm)
+# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
+# try leaving them in
+binutils.mm: $(srcdir)/binutils.texi
+ sed -e '/\\input texinfo/d' \
+ -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
+ -e '/^@ifinfo/,/^@end ifinfo/d' \
+ -e '/^@c/d' \
+ -e 's/{.*,,/{/' \
+ -e '/@noindent/d' \
+ -e 's/@ / /g' \
+ -e 's/^@alphaenumerate/@enumerate/g' \
+ -e 's/^@end alphaenumerate/@end enumerate/g' \
+ $(srcdir)/binutils.texi | \
+ $(TEXI2ROFF) -mm | \
+ sed -e 's/---/\\(em/g' \
+ >binutils.mm
+
+# roff output (-me)
+binutils.me: $(srcdir)/binutils.texi
+ sed -e '/\\input texinfo/d' \
+ -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
+ -e '/^@ifinfo/,/^@end ifinfo/d' \
+ -e '/^@c/d' \
+ -e 's/{.*,,/{/' \
+ -e 's/@ / /g' \
+ -e 's/^@alphaenumerate/@enumerate/g' \
+ -e 's/^@end alphaenumerate/@end enumerate/g' \
+ $(srcdir)/binutils.texi | \
+ $(TEXI2ROFF) -me | \
+ sed -e 's/---/\\(em/g' \
+ >binutils.me
+
+
+######################################################################
+
+mostlyclean:
+ -rm -f *.o *~ \#* core binutils.?? binutils.???
+ -rm -rf tmpdir
+clean: mostlyclean
+ -rm -f $(PROGS) underscore.c
+distclean:
+ -rm -f Makefile config.status sysdep.h *.o *~ \#* core y.* \
+ binutils.?? binutils.??s binutils.aux binutils.log binutils.toc
+ -rm -f $(PROGS) underscore.c
+realclean: clean distclean
+ -rm -f $(DISTSTUFF) TAGS
etags tags: TAGS
-TAGS: .force
- etags $(INCDIR)/*.h $(BFDSRC)/*.[hc] *.[hc]
-
-realclean: clean
- -rm -f $(PROGS) TAGS
+TAGS: force
+ etags $(INCDIR)/*.h $(srcdir)/*.[hc]
-install: $(PROGS)
- for prog in $(PROGS); do \
- rm -f $G960BASE/bin/$$prog-new; cp $$prog $$G960BASE/bin/$$prog-new ; \
+install: all $(DEMANGLER_PROG).1
+ for i in $(PROGS) ; do \
+ $(INSTALL_XFORM) $$i $(bindir)/`echo $$i | sed -e 's/.new//'` ; \
done
+ for i in $(MANPAGES) ; do \
+ $(INSTALL_XFORM1) $(srcdir)/$$i.1 $(man1dir)/$$i.1 ; \
+ done
+ $(INSTALL_XFORM1) $(DEMANGLER_PROG).1 $(man1dir)/$(DEMANGLER_PROG).1
+ -if [ -d $(tooldir) ]; then \
+ if [ -d $(tooldir)/bin ]; then true; else mkdir $(tooldir)/bin; fi; \
+ for i in $(TOOL_PROGS) ; do \
+ j=`echo $$i | sed -e 's/.new//'`; \
+ rm -f $(tooldir)/bin/$$j; \
+ k=`t='$(program_transform_name)'; echo $$j | sed -e s/x/x/ $$t`; \
+ ln $(bindir)/$$k $(tooldir)/bin/$$j >/dev/null 2>/dev/null \
+ || $(INSTALL_PROGRAM) $$i $(tooldir)/bin/$$j; \
+ done; \
+ else true; fi
+
+# This little path search is required because in the FSF net releases,
+# the info files are included in the source tree, and that may not be
+# the same as the build directory.
+install-info: binutils.info
+ if [ -r binutils.info ]; then \
+ dir=. ; \
+ else \
+ dir=$(srcdir) ; \
+ fi ; \
+ for i in `cd $$dir; echo binutils.info*` ; do \
+ $(INSTALL_DATA) $$dir/$$i $(infodir)/$$i ; \
+ done
+
+clean-info:
+ -rm -rf *.info*
+
+# Making a dist:
+# cvs rtag binutils-x-yy ld+utils
+# cvs co -r binutils-x-yy ld+utils
+# Sanitize
+# cd {HERE}; make dist [-f Makefile.in]
+dist: $(DIST_NAME).tar.z
+
+diststuff: $(DISTSTUFF)
+
+$(DIST_NAME).tar.z:
+ cd ../..; rm -f $(DIST_NAME); ln -s devo $(DIST_NAME)
+ make diststuff -f Makefile.in
+ cd ../ld; make diststuff -f Makefile.in
+ cd ../gprof; make diststuff -f Makefile.in
+ cd ../texinfo; mv texinfo.tex ..; rm -rf *; mv ../texinfo.tex .
+ # Take out texinfo from configurable dirs
+ mv ../configure.in tmp; \
+ sed -e '/^host_tools=/s/texinfo //' <tmp >../configure.in; rm tmp
+ cd ..; chmod og=u `find . -print`
+ cd ../..; tar chf - $(DIST_NAME) | gzip >$(DIST_NAME).tar.z
+ rm -rf ../../$(DIST_NAME)
-bucomm.o: bucomm.c
-version.o: version.c
-size.o: size.c
-copy.o: copy.c
-objdump.o: objdump.c
-m68k-pinsn.o: m68k-pinsn.c
-m68k-pinsn.o: ./m68k-opcode.h
-i960-pinsn.o: i960-pinsn.c
-sparc-pinsn.o: sparc-pinsn.c
-sparc-pinsn.o: ./sparc-opcode.h
-nm.o: nm.c
-ar.o: ar.c
-getopt.o:getopt.c
-getopt1.o:getopt1.c
-filemode.o:filemode.c
#-----------------------------------------------------------------------------
# 'STANDARD' GNU/960 TARGETS BELOW THIS POINT
#
# Dummy target to force execution of dependent targets.
#
-.force:
-FORCE:
+force:
# Target to uncomment host-specific lines in this makefile. Such lines must
# have the following string beginning in column 1: #__<hostname>__#
echo >>Makefile ; \
sed "s/^#__$(HOST)__#//" < Makefile.old >>Makefile
-#\f
-
-Makefile: $(srcdir)/Makefile.in $(srcdir)/configure
- (cd $(srcdir) ; ./configure -host=$(host) $(target))
+Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
+ $(SHELL) ./config.status
### Local Variables: ***
### mode:fundamental ***
projects / deliverable / binutils-gdb.git / blobdiff