# Makefile for GNU binary-file utilities
-# Copyright (C) 1992, 1993 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.
# This file is part of GNU binutils.
INSTALL = `cd $(srcdir)/..;pwd`/install.sh -c
INSTALL_PROGRAM = $(INSTALL)
-INSTALL_DATA = $(INSTALL)
+INSTALL_DATA = $(INSTALL)
INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)'
INSTALL_XFORM1 = $(INSTALL_XFORM) -b=.1
BISONFLAGS = -d
TEXI2ROFF=texi2roff
MAKEOVERRIDES=
-
+CC_FOR_BUILD = $(CC)
NM_FOR_TARGET = nm
NM = $(NM_FOR_TARGET)
SYMLINK = ln -s
-BISON = `if [ -f ../byacc/byacc ] ; then echo ../byacc/byacc ; else echo byacc ; fi`
+BISON = `if [ -f ../bison/bison ] ; then echo ../bison/bison -y -L../bison/bison ; else echo bison -y ; fi`
# Comment these out if using lex.
LEX_OPTIONS = -I -Cem
LEX = `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo flex ; fi`
# Distribution version
-VERSION=2.2
+VERSION=cygnus-2.5
# Distribution name
DIST_NAME=binutils-${VERSION}
version=`./../gcc/gcc -dumpversion`
# Where to find texinfo.tex to format docn with TeX
-TEXIDIR = $(srcdir)/../texinfo/fsf
-
-MANPAGES= ar nm objdump ranlib size strings strip c++filt objcopy
+TEXIDIR = $(srcdir)/../texinfo
#CC=gcc -Wall
+CC=cc
# these two are almost the same program
AR_PROG=ar
RANLIB_PROG=ranlib
# objcopy and strip should be the same program
OBJCOPY_PROG=objcopy
-STRIP_PROG=strip
+STRIP_PROG=strip.new
STRINGS_PROG=strings
# These should all be the same program too.
SIZE_PROG=size
-NM_PROG=nm
+NM_PROG=nm.new
OBJDUMP_PROG=objdump
# This is the demangler, as a standalone program.
+# Note: This one is used as the installed name too, unlike the above.
DEMANGLER_PROG=c++filt
NLMCONV_PROG=nlmconv
-PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) $(NLMCONV_PROG)
+SRCONV_PROG=srconv sysdump coffdump
+
+MANPAGES= ar nm objdump ranlib size strings strip objcopy nlmconv
+
+PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) $(BUILD_NLMCONV) $(BUILD_SRCONV) $(SYSINFO_PROG)
STAGESTUFF = $(PROGS) *.o
# Files that can be generated, but should be in the distribution.
-DISTSTUFF=arparse.c arlex.c
+DISTSTUFF=arparse.c arlex.c nlmheader.c sysinfo.c syslex.c info
+
+# Stuff that goes in tooldir/ if appropriate
+TOOL_PROGS = nm.new strip.new ar ranlib
BASEDIR = $(srcdir)/..
BFDDIR = $(BASEDIR)/bfd
#### host and target dependant Makefile fragments come in here.
###
+ALL_CFLAGS = $(INCLUDES) $(HDEFINES) $(TDEFINES) $(CFLAGS)
+
.c.o:
- $(CC) -c $(INCLUDES) $(HDEFINES) $(TDEFINES) $(CFLAGS) $<
+ $(CC) -c $(ALL_CFLAGS) $<
#\f
## Random definitions
# fail unnecessarily. I've also seen some Unix malloc's fail, even when
# there is enough memory. So use the new GNU malloc.
# MALLOC = gmalloc.o
+# Use this if the system malloc is good enough.
+MALLOC =
# Use the GNU getopt unless you have problems with it.
# The IRIS version could probably benefit from being assembled with
"CC=$(CC)" \
"CFLAGS=$(CFLAGS)" \
"RUNTEST=$(RUNTEST)" \
- "RUNTESTFLAGS=$(RUNTESTFLAGS) \
- SIZE=`if [ -f $$rootme/$(SIZE_PROG) ] ; then echo $$rootme/$(SIZE_PROG) ; else echo $(SIZE_PROG); fi` \
- OBJCOPY=`if [ -f $$rootme/$(OBJCOPY_PROG) ] ; then echo $$rootme/$(OBJCOPY_PROG) ; else echo $(OBJCOPY_PROG); fi` \
- NM=`if [ -f $$rootme/$(NM_PROG) ] ; then echo $$rootme/$(NM_PROG) ; else echo $(NM_PROG); fi` \
- AR=`if [ -f $$rootme/$(AR_PROG) ] ; then echo $$rootme/$(AR_PROG) ; else echo $(AR_PROG); fi` \
- OBJDUMP=`if [ -f $$rootme/$(OBJDUMP_PROG) ] ; then echo $$rootme/$(OBJDUMP_PROG) ; else echo $(OBJDUMP_PROG); fi` \
- STRINGS=`if [ -f $$rootme/$(STRINGS_PROG) ] ; then echo $$rootme/$(STRINGS_PROG) ; else echo $(STRINGS_PROG); fi` \
- STRIP=`if [ -f $$rootme/$(STRIP_PROG) ] ; then echo $$rootme/$(STRIP_PROG) ; else echo $(STRIP_PROG); fi` \
- RANLIB=`if [ -f $$rootme/$(RANLIB_PROG) ] ; then echo $$rootme/$(RANLIB_PROG) ; else echo $(RANLIB_PROG); fi` \
- DEMANGLE=`if [ -f $$rootme/$(DEMANGLER_PROG) ] ; then echo $$rootme/$(DEMANGLER_PROG) ; else echo $(DEMANGLER_PROG); fi`"
+ "RUNTESTFLAGS=$(RUNTESTFLAGS)"
#\f
## The rules
all: $(ADDL_LIBS) $(PROGS)
-testsuite:
- if [ -f testsuite/Makefile.in ]; then \
- (rootme=`pwd`/ ; export rootme ; \
- rootsrc=`cd $(srcdir); pwd`/ ; export rootsrc ; \
- cd testsuite; $(MAKE) FLAGS_TO_PASS=$(FLAGS_TO_PASS)); \
- else true ; fi
-
-check: force
- rootme=`pwd`; export rootme; cd testsuite ; \
- $(MAKE) check $(FLAGS_TO_PASS)
-# /bin/sh $(srcdir)/sanity.sh .
+# These targets are for the dejagnu testsuites. The file site.exp
+# contains global variables that all the testsuites will use.
+
+site.exp: ./config.status Makefile
+ @echo "Making a new config file..."
+ @rm -f ./tmp?
+ @touch site.exp
+ @mv site.exp site.bak
+ @echo "## variables are automatically generated by make ##" > ./tmp0
+ @echo "# Do not edit here. If you wish to override these" >> ./tmp0
+ @echo "# values, add them to the last section" >> ./tmp0
+ @echo "# HOST AND TARGET INFO" >> ./tmp0
+ @echo "set host_os $(host_os)" >> ./tmp0
+ @echo "set host_alias $(host_alias)" >> ./tmp0
+ @echo "set host_cpu $(host_cpu)" >> ./tmp0
+ @echo "set host_vendor $(host_vendor)" >> ./tmp0
+ @echo "set target_os $(target_os)" >> ./tmp0
+ @echo "set target_alias $(target_alias)" >> ./tmp0
+ @echo "set target_cpu $(target_cpu)" >> ./tmp0
+ @echo "set target_vendor $(target_vendor)" >> ./tmp0
+ @echo "set host_triplet $(host_canonical)" >> ./tmp0
+ @echo "set target_triplet $(target_canonical)" >> ./tmp0
+ @echo "# DIRECTORY INFO" >> ./tmp0
+ @echo "set objdir `pwd`" >> ./tmp0
+ @echo "" >> ./tmp0
+ @echo "## Variables generated by configure. Do Not Edit ##" >> ./tmp0
+ @cat ./tmp0 > site.exp
+ @cat site.bak | sed \
+ -e '1,/^## Variables generated by.*##/ d' >> site.exp
+ -@rm -f ./tmp?
+
+check: site.exp
+ r=`pwd`; export r; \
+ srcroot=`cd ${srcdir}; pwd` ; export srcroot ; \
+ EXPECT=${EXPECT} ; export EXPECT ; \
+ if [ -f $$r/../expect/expect ] ; then \
+ TCL_LIBRARY=$${srcroot}/../tcl/library ; \
+ export TCL_LIBRARY ; else true; fi ; \
+ $(RUNTEST) --tool binutils --srcdir $(srcdir)/testsuite \
+ $(RUNTESTFLAGS)
installcheck:
/bin/sh $(srcdir)/sanity.sh $(bindir)
dvi: binutils.dvi
$(SIZE_PROG): $(ADDL_LIBS) size.o $(BFD)
- $(CC) $(LDFLAGS) -o $(SIZE_PROG) size.o $(ADDL_LIBS) $(EXTRALIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(SIZE_PROG) size.o $(ADDL_LIBS) $(EXTRALIBS)
$(OBJCOPY_PROG): $(ADDL_LIBS) objcopy.o not-strip.o $(BFD)
- $(CC) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o not-strip.o $(ADDL_LIBS) $(EXTRALIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o not-strip.o $(ADDL_LIBS) $(EXTRALIBS)
$(STRINGS_PROG): $(ADDL_LIBS) strings.o $(BFD)
- $(CC) $(LDFLAGS) -o $(STRINGS_PROG) strings.o $(ADDL_LIBS) $(EXTRALIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(STRINGS_PROG) strings.o $(ADDL_LIBS) $(EXTRALIBS)
$(STRIP_PROG): $(ADDL_LIBS) objcopy.o is-strip.o $(BFD)
- $(CC) $(LDFLAGS) -o $(STRIP_PROG) objcopy.o is-strip.o $(ADDL_LIBS) $(EXTRALIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(STRIP_PROG) objcopy.o is-strip.o $(ADDL_LIBS) $(EXTRALIBS)
$(NM_PROG): $(ADDL_LIBS) nm.o $(BFD)
- $(CC) $(LDFLAGS) -o $(NM_PROG) nm.o $(ADDL_LIBS) $(EXTRALIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(NM_PROG) nm.o $(ADDL_LIBS) $(EXTRALIBS)
$(OBJDUMP_PROG): $(ADDL_LIBS) objdump.o $(BFD) $(OPCODES)
- $(CC) $(LDFLAGS) -o $(OBJDUMP_PROG) objdump.o $(OPCODES) $(ADDL_LIBS) $(EXTRALIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(OBJDUMP_PROG) objdump.o $(OPCODES) $(ADDL_LIBS) $(EXTRALIBS)
-objdump.o: objdump.c
- $(CC) -c $(INCLUDES) $(HDEFINES) $(TDEFINES) $(ARCHDEFS) $(CFLAGS) $(srcdir)/objdump.c
+underscore.c: Makefile
+ rm -f underscore.c
+ echo '/*WARNING: This file is automatically generated!*/' >underscore.t
+ echo "int prepends_underscore = $(UNDERSCORE);" >>underscore.t
+ mv -f underscore.t underscore.c
-underscore.c:
- echo "int xxy_us_dummy;" >dummy.c
- $(CC) -c dummy.c
- echo '/*WARNING: This file is automatically generated!*/' >underscore.c
- if [ "`$(NM) dummy.o | grep _xxy_us_dummy ; true`" != "" ]; then \
- echo "int prepends_underscore = 1;" >>underscore.c; \
- else \
- echo "int prepends_underscore = 0;" >>underscore.c; \
- fi
- -rm -f dummy.c dummy.o
-
-version.o: version.c
+version.o: version.c Makefile
$(CC) $(INCLUDES) $(HDEFINES) $(TDEFINES) -DVERSION='"$(VERSION)"' $(CFLAGS) -c $(srcdir)/version.c
-cplus-dem.o: $(BASEDIR)/libiberty/cplus-dem.c $(INCDIR)/getopt.h
+cplus-dem.o: $(BASEDIR)/libiberty/cplus-dem.c $(INCDIR)/getopt.h
$(CC) -c -DMAIN $(INCLUDES) $(HDEFINES) $(TDEFINES) $(CFLAGS) $(BASEDIR)/libiberty/cplus-dem.c
$(DEMANGLER_PROG): cplus-dem.o $(LIBIBERTY) underscore.o version.o
- $(CC) $(LDFLAGS) -o $(DEMANGLER_PROG) cplus-dem.o $(LIBIBERTY) $(EXTRALIBS) underscore.o version.o
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(DEMANGLER_PROG) cplus-dem.o $(LIBIBERTY) $(EXTRALIBS) underscore.o version.o
arparse.c: arparse.y
$(BISON) $(BISONFLAGS) $(srcdir)/arparse.y
- -mv y.tab.c arparse.c
- -mv y.tab.h arparse.h
+ mv -f y.tab.c arparse.c
+ mv -f y.tab.h arparse.h
+
+# Separate from arparse.c so that a parallel make doesn't try to build
+# both arparse.c and arparse.h simultaneously.
+arparse.h: arparse.c
arlex.c: arlex.l
$(LEX) $(LEX_OPTIONS) $(srcdir)/arlex.l
mv lex.yy.c arlex.c
$(AR_PROG): $(ADDL_LIBS) ar.o arparse.o arlex.o not-ranlib.o $(BFD) arsup.o
- $(CC) $(LDFLAGS) -o $(AR_PROG) ar.o arparse.o arlex.o arsup.o not-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o arparse.o arlex.o arsup.o not-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
$(RANLIB_PROG): $(ADDL_LIBS) ar.o is-ranlib.o arparse.o arlex.o arsup.o $(BFD)
- $(CC) $(LDFLAGS) -o $(RANLIB_PROG) ar.o arparse.o arlex.o arsup.o is-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(RANLIB_PROG) ar.o arparse.o arlex.o arsup.o is-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
# This rule creates a single binary that switches between ar and ranlib
# by looking at argv[0]. Use this kludge to save some disk space.
# Alternatively, you can install ranlib.sh as ranlib.
ar_with_ranlib: $(ADDL_LIBS) ar.o maybe-ranlib.o $(BFD)
- $(CC) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
-rm -f $(RANLIB_PROG)
-ln $(AR_PROG) $(RANLIB_PROG)
# objcopy and strip in one binary that uses argv[0] to decide its action.
objcopy_with_strip: $(ADDL_LIBS) objcopy.o maybe-strip.o $(BFD)
- $(CC) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
-rm -f $(STRIP_PROG)
-ln $(OBJCOPY_PROG) $(STRIP_PROG)
-nlmheader.c: nlmheader.y
+sysroff.c: sysinfo sysroff.info
+ ./sysinfo -c <$(srcdir)/sysroff.info >sysroff.c
+ ./sysinfo -i <$(srcdir)/sysroff.info >>sysroff.c
+ ./sysinfo -g <$(srcdir)/sysroff.info >>sysroff.c
+
+sysroff.h: sysinfo sysroff.info
+ ./sysinfo -d <$(srcdir)/sysroff.info >sysroff.h
+
+# Depend upon arparse.c to avoid building both arparse.c and sysinfo.c
+# simultaneously.
+sysinfo.c: sysinfo.y arparse.c
+ $(BISON) -tvd $(srcdir)/sysinfo.y
+ rm -f sysinfo.c
+ mv -f y.tab.c sysinfo.c
+ mv -f y.tab.h sysinfo.h
+
+# Separate from sysinfo.c so that a parallel make doesn't try to build
+# both sysinfo.c and sysinfo.h simultaneously.
+sysinfo.h: sysinfo.c
+
+syslex.c : syslex.l
+ $(LEX) $(LEX_OPTIONS) $(srcdir)/syslex.l
+ mv lex.yy.c syslex.c
+
+sysinfo: sysinfo.o syslex.o
+ $(CC_FOR_BUILD) $(CFLAGS) $(LDFLAGS) -o $@ sysinfo.o syslex.o
+
+syslex.o: syslex.c sysinfo.h
+ if [ -r syslex.c ]; then \
+ $(CC_FOR_BUILD) -c -I. $(CFLAGS) syslex.c ; \
+ else \
+ $(CC_FOR_BUILD) -c -I. $(CFLAGS) $(srcdir)/syslex.c ;\
+ fi
+
+sysinfo.o: sysinfo.c
+ if [ -r sysinfo.c ]; then \
+ $(CC_FOR_BUILD) -c -I. $(CFLAGS) sysinfo.c ; \
+ else \
+ $(CC_FOR_BUILD) -c -I. $(CFLAGS) $(srcdir)/sysinfo.c ; \
+ fi
+
+srconv.o: srconv.c sysroff.h sysroff.c coffgrok.h $(INCDIR)/coff/internal.h \
+ ../bfd/libcoff.h
+
+srconv: srconv.o coffgrok.o $(ADDL_LIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ srconv.o coffgrok.o $(ADDL_LIBS) $(EXTRALIBS)
+
+coffdump: coffdump.o coffgrok.o $(ADDL_LIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ coffdump.o coffgrok.o $(ADDL_LIBS) $(EXTRALIBS)
+
+sysdump.o: sysdump.c sysroff.h sysroff.c
+
+sysdump: sysdump.o $(ADDL_LIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ sysdump.o $(ADDL_LIBS) $(EXTRALIBS)
+
+# Depend upon sysinfo.c to avoid building both nlmheader.c and sysinfo.c
+# simultaneously.
+nlmheader.c: nlmheader.y sysinfo.c
$(BISON) $(srcdir)/nlmheader.y
rm -f nlmheader.c
- -mv y.tab.c nlmheader.c
+ mv -f y.tab.c nlmheader.c
+
+nlmconv.o: nlmconv.c
+ ldname=`t='$(program_transform_name)'; echo ld | sed -e "s/brokensed/brokensed/" $$t`; \
+ $(CC) -c -DLD_NAME="\"$${ldname}\"" $(INCLUDES) $(HDEFINES) $(TDEFINES) $(NLMCONV_DEFS) $(CFLAGS) $(srcdir)/nlmconv.c
$(NLMCONV_PROG): nlmconv.o nlmheader.o $(ADDL_LIBS) $(BFD)
- $(CC) $(LDFLAGS) -o $@ nlmconv.o nlmheader.o $(ADDL_LIBS) $(EXTRALIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ nlmconv.o nlmheader.o $(ADDL_LIBS) $(EXTRALIBS)
# This list of dependencies was generated by doing a make with gcc -MM
# saving the output in a file and removing the gcc commands
bucomm.o: bucomm.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
$(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
- $(INCDIR)/fopen-same.h
+ $(INCDIR)/fopen-same.h bucomm.h
filemode.o: filemode.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
$(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
$(INCDIR)/fopen-same.h
$(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
$(INCDIR)/fopen-same.h bucomm.h $(INCDIR)/getopt.h \
$(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def \
- $(INCDIR)/aout/ranlib.h
+ $(INCDIR)/aout/ranlib.h $(INCDIR)/demangle.h
ar.o: ar.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
$(INCDIR)/obstack.h ../bfd/sysdep.h $(BFDDIR)/hosts/std-host.h \
$(INCDIR)/fopen-same.h bucomm.h $(INCDIR)/aout/ar.h \
is-strip.o: is-strip.c
is-ranlib.o: is-ranlib.c
not-strip.o: not-strip.c
-nlmheader.o: nlmheader.c nlmconv.h $(INCDIR)/nlm/common.h \
- $(INCDIR)/nlm/internal.h
-nlmconv.o: nlmconv.c nlmconv.h $(INCDIR)/nlm/common.h \
- $(INCDIR)/nlm/internal.h $(BFDDIR)/libnlm.h
+nlmheader.o: nlmheader.c ../bfd/bfd.h ../bfd/sysdep.h \
+ $(BFDDIR)/hosts/std-host.h $(INCDIR)/fopen-same.h bucomm.h \
+ $(INCDIR)/nlm/common.h $(INCDIR)/nlm/internal.h nlmconv.h
+nlmconv.o: nlmconv.c ../bfd/bfd.h $(INCDIR)/libiberty.h ../bfd/sysdep.h \
+ $(BFDDIR)/hosts/std-host.h $(INCDIR)/fopen-same.h bucomm.h \
+ $(BFDDIR)/libnlm.h $(INCDIR)/nlm/common.h \
+ $(INCDIR)/nlm/internal.h $(INCDIR)/nlm/external.h nlmconv.h \
+ $(INCDIR)/coff/sym.h $(INCDIR)/coff/ecoff.h
stage1: force
- mkdir stage1
# DOCUMENTATION TARGETS
# TeX output
binutils.dvi: $(srcdir)/binutils.texi
- $(TEXI2DVI) $(srcdir)/binutils.texi
+ TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/binutils.texi
# info file for online browsing
binutils.info: $(srcdir)/binutils.texi
$(MAKEINFO) -o binutils.info $(srcdir)/binutils.texi
+$(DEMANGLER_PROG).1: cxxfilt.man Makefile
+ sed -e 's/@PROGRAM@/$(DEMANGLER_PROG)/' < $(srcdir)/cxxfilt.man \
+ > $(DEMANGLER_PROG).1
+
# different targets for -ms, -mm, -me
# Try to use a recent texi2roff. v2 was put on prep in jan91.
# If you want an index, see texi2roff doc for postprocessing
# and add -i to texi2roff invocations below.
# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
-# correspondint -e lines when later texi2roff's are current)
+# corresponding -e lines when later texi2roff's are current)
# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
# + @c's deleted explicitly because texi2roff sees texinfo commands in them
# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
mostlyclean:
-rm -f *.o *~ \#* core binutils.?? binutils.???
+ -rm -rf tmpdir
clean: mostlyclean
-rm -f $(PROGS) underscore.c
-distclean: clean
- -rm -f Makefile config.status sysdep.h
-realclean: distclean
+distclean:
+ -rm -f Makefile config.status sysdep.h *.o *~ \#* core y.* \
+ binutils.?? binutils.??s binutils.aux binutils.log binutils.toc
+ -rm -f $(PROGS) underscore.c
+realclean: clean distclean
-rm -f $(DISTSTUFF) TAGS
etags tags: TAGS
TAGS: force
etags $(INCDIR)/*.h $(srcdir)/*.[hc]
-install: all
+install: all $(DEMANGLER_PROG).1
for i in $(PROGS) ; do \
- $(INSTALL_XFORM) $$i $(bindir)/$$i ; \
+ $(INSTALL_XFORM) $$i $(bindir)/`echo $$i | sed -e 's/.new//'` ; \
done
for i in $(MANPAGES) ; do \
$(INSTALL_XFORM1) $(srcdir)/$$i.1 $(man1dir)/$$i.1 ; \
done
+ $(INSTALL_XFORM1) $(DEMANGLER_PROG).1 $(man1dir)/$(DEMANGLER_PROG).1
-if [ -d $(tooldir) ]; then \
- if [ -d $(tooldir)/bin ] ; then true ; else mkdir $(tooldir)/bin ; fi; \
- for i in nm strings strip ar ranlib; do \
- rm -f $(tooldir)/bin/$$i; \
- ln $(bindir)/`t='$(program_transform_name)'; echo $$i | sed -e "" $$t` $(tooldir)/bin/$$i \
- || $(INSTALL_PROGRAM) $$i $(tooldir)/bin/$$i; \
- done; \
- else true; fi
-
-install-info: info
- for i in *.info* ; do \
- $(INSTALL_DATA) $$i $(infodir)/$$i ; \
+ if [ -d $(tooldir)/bin ]; then true; else mkdir $(tooldir)/bin; fi; \
+ for i in $(TOOL_PROGS) ; do \
+ j=`echo $$i | sed -e 's/.new//'`; \
+ rm -f $(tooldir)/bin/$$j; \
+ k=`t='$(program_transform_name)'; echo $$j | sed -e s/x/x/ $$t`; \
+ ln $(bindir)/$$k $(tooldir)/bin/$$j >/dev/null 2>/dev/null \
+ || $(INSTALL_PROGRAM) $$i $(tooldir)/bin/$$j; \
+ done; \
+ else true; fi
+
+# This little path search is required because in the FSF net releases,
+# the info files are included in the source tree, and that may not be
+# the same as the build directory.
+install-info: binutils.info
+ if [ -r binutils.info ]; then \
+ dir=. ; \
+ else \
+ dir=$(srcdir) ; \
+ fi ; \
+ for i in `cd $$dir; echo binutils.info*` ; do \
+ $(INSTALL_DATA) $$dir/$$i $(infodir)/$$i ; \
done
clean-info: