AUTOMAKE_OPTIONS = cygnus dejagnu
-SUBDIRS = po
+SUBDIRS = doc po
tooldir = $(exec_prefix)/$(target_alias)
SRCONV_PROG = srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
-MANCONF = -Dman
-
-TEXI2POD = perl $(srcdir)/../etc/texi2pod.pl
-
-POD2MAN = pod2man --center="GNU" --release="binutils-$(VERSION)" --section=1
-
-# List of man pages generated from binutils.texi
-man_MANS = addr2line.1 ar.1 dlltool.1 nlmconv.1 nm.1 objcopy.1 objdump.1 ranlib.1 readelf.1 size.1 strings.1 strip.1 windres.1 $(DEMANGLER_NAME).1
-
-
PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ $(ADDR2LINE_PROG) $(READELF_PROG) @BUILD_DLLWRAP@ @BUILD_MISC@
bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ $(ADDR2LINE_PROG) $(READELF_PROG) @BUILD_DLLWRAP@ @BUILD_MISC@
INCLUDES = -D_GNU_SOURCE -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) @HDEFINES@ -I$(srcdir)/../intl -I../intl -DLOCALEDIR="\"$(prefix)/share/locale\""
-HFILES = arsup.h bucomm.h budbg.h coffgrok.h debug.h nlmconv.h dlltool.h windres.h winduni.h
+HFILES = arsup.h bucomm.h budbg.h coffgrok.h debug.h nlmconv.h dlltool.h \
+ windres.h winduni.h
GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h
-CFILES = addr2line.c ar.c arsup.c bucomm.c coffdump.c coffgrok.c debug.c dlltool.c filemode.c ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c nlmconv.c nm.c not-ranlib.c not-strip.c objcopy.c objdump.c prdbg.c rdcoff.c rddbg.c size.c srconv.c stabs.c strings.c sysdump.c version.c wrstabs.c windres.c resrc.c rescoff.c resbin.c winduni.c readelf.c resres.c dllwrap.c rename.c
+CFILES = addr2line.c ar.c arsup.c bucomm.c coffdump.c coffgrok.c debug.c \
+ dlltool.c filemode.c ieee.c is-ranlib.c is-strip.c maybe-ranlib.c \
+ maybe-strip.c nlmconv.c nm.c not-ranlib.c not-strip.c \
+ objcopy.c objdump.c prdbg.c rdcoff.c rddbg.c size.c srconv.c \
+ stabs.c strings.c sysdump.c version.c wrstabs.c \
+ windres.c resrc.c rescoff.c resbin.c winduni.c readelf.c \
+ resres.c dllwrap.c rename.c
-GENERATED_CFILES = underscore.c arparse.c arlex.c sysroff.c sysinfo.c syslex.c defparse.c deflex.c nlmheader.c rcparse.c rclex.c
+GENERATED_CFILES = \
+ underscore.c arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
+ defparse.c deflex.c nlmheader.c rcparse.c rclex.c
DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c
POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
-EXPECT = `if [ -f $$r/../expect/expect ] ; then echo $$r/../expect/expect ; else echo expect ; fi`
-
-RUNTEST = `if [ -f ${srcdir}/../dejagnu/runtest ] ; then echo ${srcdir}/../dejagnu/runtest ; else echo runtest ; fi`
+EXPECT = `if [ -f $$r/../expect/expect ] ; then \
+ echo $$r/../expect/expect ; \
+ else echo expect ; fi`
+RUNTEST = `if [ -f ${srcdir}/../dejagnu/runtest ] ; then \
+ echo ${srcdir}/../dejagnu/runtest ; \
+ else echo runtest ; fi`
-CC_FOR_TARGET = ` if [ -f $$r/../gcc/xgcc ] ; then if [ -f $$r/../newlib/Makefile ] ; then echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; else echo $$r/../gcc/xgcc -B$$r/../gcc/; fi; else if [ "@host@" = "@target@" ] ; then echo $(CC); else echo gcc | sed '$(transform)'; fi; fi`
+CC_FOR_TARGET = ` \
+ if [ -f $$r/../gcc/xgcc ] ; then \
+ if [ -f $$r/../newlib/Makefile ] ; then \
+ echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
+ else \
+ echo $$r/../gcc/xgcc -B$$r/../gcc/; \
+ fi; \
+ else \
+ if [ "@host@" = "@target@" ] ; then \
+ echo $(CC); \
+ else \
+ echo gcc | sed '$(transform)'; \
+ fi; \
+ fi`
-info_TEXINFOS = binutils.texi
LDADD = $(BFDLIB) $(LIBIBERTY) $(INTLLIBS)
nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)
-windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.l winduni.c resres.c $(BULIBS)
+windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.l \
+ winduni.c resres.c $(BULIBS)
windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(INTLLIBS)
dllwrap_SOURCES = dllwrap.c version.c
dllwrap_LDADD = $(LIBIBERTY) $(INTLLIBS)
-DISTSTUFF = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h syslex.c deflex.c defparse.h defparse.c rclex.c rcparse.h rcparse.c
+EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \
+ syslex.c deflex.c defparse.h defparse.c rclex.c rcparse.h rcparse.c
-DISTCLEANFILES = stamp-under sysinfo underscore.c sysroff.c sysroff.h site.exp site.bak
+DISTCLEANFILES = stamp-under sysinfo underscore.c sysroff.c sysroff.h \
+ site.exp site.bak
-MAINTAINERCLEANFILES = config.texi
-
-MOSTLYCLEANFILES = sysinfo $(DEMANGLER_NAME).1 binutils.log binutils.sum abcdefgh*
+###
+MOSTLYCLEANFILES = sysinfo binutils.log binutils.sum abcdefgh*
CLEANFILES = dep.sed DEP DEPA DEP1 DEP2
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then echo $(top_srcdir)/../texinfo/util/texi2dvi; else echo texi2dvi; fi`
-TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
-INFO_DEPS = binutils.info
-DVIS = binutils.dvi
-TEXINFOS = binutils.texi
-man1dir = $(mandir)/man1
-MANS = $(man_MANS)
-
-NROFF = nroff
DIST_COMMON = README ./stamp-h.in ChangeLog Makefile.am Makefile.in \
NEWS acinclude.m4 aclocal.m4 arlex.c arparse.c config.in configure \
configure.in deflex.c defparse.c nlmheader.c rclex.c rcparse.c
all: all-redirect
.SUFFIXES:
-.SUFFIXES: .S .c .dvi .info .l .lo .o .obj .ps .s .texi .texinfo .txi .y
+.SUFFIXES: .S .c .l .lo .o .obj .s .y
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
rcparse.h: rcparse.c
-binutils.info: binutils.texi
-binutils.dvi: binutils.texi
-
-
-DVIPS = dvips
-
-.texi.info:
- @rm -f $@ $@-[0-9] $@-[0-9][0-9]
- $(MAKEINFO) -I $(srcdir) $<
-
-.texi.dvi:
- TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
- MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.texi:
- @rm -f $@ $@-[0-9] $@-[0-9][0-9]
- $(MAKEINFO) -I $(srcdir) $<
-
-.texinfo.info:
- @rm -f $@ $@-[0-9] $@-[0-9][0-9]
- $(MAKEINFO) -I $(srcdir) $<
-
-.texinfo:
- @rm -f $@ $@-[0-9] $@-[0-9][0-9]
- $(MAKEINFO) -I $(srcdir) $<
-
-.texinfo.dvi:
- TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
- MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi.info:
- @rm -f $@ $@-[0-9] $@-[0-9][0-9]
- $(MAKEINFO) -I $(srcdir) $<
-
-.txi.dvi:
- TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
- MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi:
- @rm -f $@ $@-[0-9] $@-[0-9][0-9]
- $(MAKEINFO) -I $(srcdir) $<
-.dvi.ps:
- $(DVIPS) $< -o $@
-
-install-info-am: $(INFO_DEPS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(infodir)
- @list='$(INFO_DEPS)'; \
- for file in $$list; do \
- if test -f $$file; then d=.; else d=$(srcdir); fi; \
- for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
- if test -f $$d/$$ifile; then \
- echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
- $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
- else : ; fi; \
- done; \
- done
- @$(POST_INSTALL)
- @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
- install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
- done; \
- else : ; fi
-
-uninstall-info:
- $(PRE_UNINSTALL)
- @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
- ii=yes; \
- else ii=; fi; \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- test -z "$ii" \
- || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
- done
- @$(NORMAL_UNINSTALL)
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
- done
-
-dist-info: $(INFO_DEPS)
- list='$(INFO_DEPS)'; \
- for base in $$list; do \
- if test -f $$base; then d=.; else d=$(srcdir); fi; \
- for file in `cd $$d && eval echo $$base*`; do \
- test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file; \
- done; \
- done
-
-mostlyclean-aminfo:
- -rm -f binutils.aux binutils.cp binutils.cps binutils.dvi binutils.fn \
- binutils.fns binutils.ky binutils.kys binutils.ps \
- binutils.log binutils.pg binutils.toc binutils.tp \
- binutils.tps binutils.vr binutils.vrs binutils.op binutils.tr \
- binutils.cv binutils.cn
-
-clean-aminfo:
-
-distclean-aminfo:
-
-maintainer-clean-aminfo:
- for i in $(INFO_DEPS); do \
- rm -f $$i; \
- if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
- rm -f $$i-[0-9]*; \
- fi; \
- done
-clean-info: mostlyclean-aminfo
-
-install-man1:
- $(mkinstalldirs) $(DESTDIR)$(man1dir)
- @list='$(man1_MANS)'; \
- l2='$(man_MANS)'; for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
- $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
- done
-
-uninstall-man1:
- @list='$(man1_MANS)'; \
- l2='$(man_MANS)'; for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
- rm -f $(DESTDIR)$(man1dir)/$$inst; \
- done
-install-man: $(MANS)
- @$(NORMAL_INSTALL)
- $(MAKE) $(AM_MAKEFLAGS) install-man1
-uninstall-man:
- @$(NORMAL_UNINSTALL)
- $(MAKE) $(AM_MAKEFLAGS) uninstall-man1
-
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
@for file in $(DISTFILES); do \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
- cp -pr $$/$$file $(distdir)/$$file; \
+ cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| exit 1; \
fi; \
done
- $(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
RUNTESTFLAGS =
@test ! -f site.exp || sed '1,/^## All variables above are.*##/ d' site.exp >> $@-t
@test ! -f site.exp || mv site.exp site.bak
@mv $@-t site.exp
-info-am: $(INFO_DEPS)
+info-am:
info: info-recursive
-dvi-am: $(DVIS)
+dvi-am:
dvi: dvi-recursive
check-am:
$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
install-exec-am: install-binPROGRAMS install-exec-local
install-exec: install-exec-recursive
-install-data-am: install-man
+install-data-am:
install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
-uninstall-am: uninstall-binPROGRAMS uninstall-man
+uninstall-am: uninstall-binPROGRAMS
uninstall: uninstall-recursive
-all-am: Makefile $(PROGRAMS) $(MANS) config.h
+all-am: Makefile $(PROGRAMS) config.h
all-redirect: all-recursive-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
- $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(mandir)/man1
+ $(mkinstalldirs) $(DESTDIR)$(bindir)
mostlyclean-generic:
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
- -test -z "arlexldeflexlrclexlarparseharparsecdefparsehdefparsecnlmheaderhnlmheadercrcparsehrcparsec$(MAINTAINERCLEANFILES)" || rm -f arlexl deflexl rclexl arparseh arparsec defparseh defparsec nlmheaderh nlmheaderc rcparseh rcparsec $(MAINTAINERCLEANFILES)
+ -test -z "arlexldeflexlrclexlarparseharparsecdefparsehdefparsecnlmheaderhnlmheadercrcparsehrcparsec" || rm -f arlexl deflexl rclexl arparseh arparsec defparseh defparsec nlmheaderh nlmheaderc rcparseh rcparsec
mostlyclean-am: mostlyclean-hdr mostlyclean-binPROGRAMS \
mostlyclean-noinstPROGRAMS mostlyclean-compile \
- mostlyclean-libtool mostlyclean-aminfo mostlyclean-tags \
+ mostlyclean-libtool mostlyclean-tags \
mostlyclean-generic mostlyclean-local
mostlyclean: mostlyclean-recursive
clean-am: clean-hdr clean-binPROGRAMS clean-noinstPROGRAMS \
- clean-compile clean-libtool clean-aminfo clean-tags \
- clean-generic mostlyclean-am
+ clean-compile clean-libtool clean-tags clean-generic \
+ mostlyclean-am
clean: clean-recursive
distclean-am: distclean-hdr distclean-binPROGRAMS \
distclean-noinstPROGRAMS distclean-compile \
- distclean-libtool distclean-aminfo distclean-tags \
- distclean-generic clean-am
+ distclean-libtool distclean-tags distclean-generic \
+ clean-am
-rm -f libtool
distclean: distclean-recursive
maintainer-clean-am: maintainer-clean-hdr maintainer-clean-binPROGRAMS \
maintainer-clean-noinstPROGRAMS \
maintainer-clean-compile maintainer-clean-libtool \
- maintainer-clean-aminfo maintainer-clean-tags \
- maintainer-clean-generic distclean-am
+ maintainer-clean-tags maintainer-clean-generic \
+ distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \
mostlyclean-compile distclean-compile clean-compile \
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool install-info-am uninstall-info \
-mostlyclean-aminfo distclean-aminfo clean-aminfo \
-maintainer-clean-aminfo install-man1 uninstall-man1 install-man \
-uninstall-man install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
+clean-libtool maintainer-clean-libtool install-data-recursive \
+uninstall-data-recursive install-exec-recursive \
+uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
+all-recursive check-recursive installcheck-recursive info-recursive \
+dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir check-DEJAGNU \
info-am info dvi-am dvi check check-am installcheck-am installcheck \
ldname=`echo ld | sed '$(transform)'`; \
$(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
-diststuff: $(DISTSTUFF) info
+diststuff: $(EXTRA_DIST) info
# Targets to rebuild dependencies in this Makefile.
# Have to get rid of DEP1 here so that "$?" later includes all of $(CFILES).
$(SHELL) $(srcdir)/../move-if-change tmp-Makefile.am $(srcdir)/Makefile.am
.PHONY: dep dep-in dep-am
-
-###
-# DOCUMENTATION TARGETS
-config.texi: Makefile
- rm -f config.texi
- echo '@set VERSION $(VERSION)' > config.texi
-
-binutils.dvi: $(srcdir)/binutils.texi config.texi
-
-binutils.info: $(srcdir)/binutils.texi config.texi
-
-# Man page generation from texinfo
-$(srcdir)/addr2line.1: $(srcdir)/binutils.texi
- touch $@
- -$(TEXI2POD) $(MANCONF) -Daddr2line < $< > $@.pod
- -($(POD2MAN) $@.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $@.pod
-
-$(srcdir)/ar.1: $(srcdir)/binutils.texi
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dar < $< > $@.pod
- -($(POD2MAN) $@.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $@.pod
-
-$(srcdir)/dlltool.1: $(srcdir)/binutils.texi
- touch $@
- -$(TEXI2POD) $(MANCONF) -Ddlltool < $< > $@.pod
- -($(POD2MAN) $@.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $@.pod
-
-$(srcdir)/dlltool.1: $(srcdir)/binutils.texi
- touch $@
- -$(TEXI2POD) $(MANCONF) -Ddlltool < $< > $@.pod
- -($(POD2MAN) $@.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $@.pod
-
-$(srcdir)/nlmconv.1: $(srcdir)/binutils.texi
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dnlmconv < $< > $@.pod
- -($(POD2MAN) $@.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $@.pod
-
-$(srcdir)/nm.1: $(srcdir)/binutils.texi
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dnm < $< > $@.pod
- -($(POD2MAN) $@.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $@.pod
-
-$(srcdir)/objcopy.1: $(srcdir)/binutils.texi
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjcopy < $< > $@.pod
- -($(POD2MAN) $@.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $@.pod
-
-$(srcdir)/objdump.1: $(srcdir)/binutils.texi
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjdump < $< > $@.pod
- -($(POD2MAN) $@.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $@.pod
-
-$(srcdir)/ranlib.1: $(srcdir)/binutils.texi
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dranlib < $< > $@.pod
- -($(POD2MAN) $@.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $@.pod
-
-$(srcdir)/readelf.1: $(srcdir)/binutils.texi
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dreadelf < $< > $@.pod
- -($(POD2MAN) $@.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $@.pod
-
-$(srcdir)/size.1: $(srcdir)/binutils.texi
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dsize < $< > $@.pod
- -($(POD2MAN) $@.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $@.pod
-
-$(srcdir)/strings.1: $(srcdir)/binutils.texi
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrings < $< > $@.pod
- -($(POD2MAN) $@.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $@.pod
-
-$(srcdir)/strip.1: $(srcdir)/binutils.texi
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrip < $< > $@.pod
- -($(POD2MAN) $@.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $@.pod
-
-$(srcdir)/windres.1: $(srcdir)/binutils.texi
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dwindres < $< > $@.pod
- -($(POD2MAN) $@.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $@.pod
-
-$(srcdir)/cxxfilt.man: $(srcdir)/binutils.texi
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dcxxfilt < $< > $@.pod
- -($(POD2MAN) $@.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $@.pod
-
-$(DEMANGLER_NAME).1: cxxfilt.man Makefile
- sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' < $(srcdir)/cxxfilt.man \
- > $(DEMANGLER_NAME).1
mostlyclean-local:
-rm -rf tmpdir