LIBOBJS
EMULATION_VECTOR
EMULATION
+OBJDUMP_PRIVATE_OFILES
OBJDUMP_DEFS
BUILD_INSTALL_MISC
BUILD_MISC
with_gnu_ld
enable_libtool_lock
enable_targets
+enable_deterministic_archives
enable_werror
enable_build_warnings
enable_nls
enable_maintainer_mode
+with_zlib
enable_rpath
with_libiconv_prefix
'
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-targets alternative target configurations
+ --enable-deterministic-archives
+ ar and ranlib default to -D behavior
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings
--disable-nls do not use Native Language Support
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-zlib include zlib support (auto/yes/no) default=auto
--with-gnu-ld assume the C compiler uses GNU ld default=no
--with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
--without-libiconv-prefix don't search for libiconv in includedir and libdir
hardcode_shlibpath_var=no
;;
- freebsd1*)
- ld_shlibs=no
- ;;
-
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
# support. Future versions do this automatically, but an explicit c++rt0.o
# does not break anything, and helps significantly (at the cost of a little
shlibpath_var=LD_LIBRARY_PATH
;;
-freebsd1*)
- dynamic_linker=no
- ;;
-
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11209 "configure"
+#line 11207 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11315 "configure"
+#line 11313 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
esac
fi
+# Check whether --enable-deterministic-archives was given.
+if test "${enable_deterministic_archives+set}" = set; then :
+ enableval=$enable_deterministic_archives;
+if test "${enableval}" = no; then
+ default_ar_deterministic=0
+else
+ default_ar_deterministic=1
+fi
+else
+ default_ar_deterministic=0
+fi
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define DEFAULT_AR_DETERMINISTIC $default_ar_deterministic
+_ACEOF
+
+
GCC_WARN_CFLAGS="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
# Link in zlib if we can. This allows us to read compressed debug
# sections. This is used only by readelf.c (objdump uses bfd for
# reading compressed sections).
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
+
+ # See if the user specified whether he wants zlib support or not.
+
+# Check whether --with-zlib was given.
+if test "${with_zlib+set}" = set; then :
+ withval=$with_zlib;
+else
+ with_zlib=auto
+fi
+
+
+ if test "$with_zlib" != "no"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
$as_echo_n "checking for library containing zlibVersion... " >&6; }
if test "${ac_cv_search_zlibVersion+set}" = set; then :
$as_echo_n "(cached) " >&6
fi
+ if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
+ as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
+ fi
+ fi
+
case "${host}" in
BUILD_MISC=
BUILD_INSTALL_MISC=
OBJDUMP_DEFS=
+OBJDUMP_PRIVATE_VECTORS=
+OBJDUMP_PRIVATE_OFILES=
+od_vectors=
for targ in $target $canon_targets
do
fi
DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_I386"
BUILD_DLLWRAP='$(DLLWRAP_PROG)$(EXEEXT)'
+ od_vectors="$od_vectors objdump_private_desc_xcoff"
else
case $targ in
i[3-7]86*-*-netware*)
NLMCONV_DEFS="$NLMCONV_DEFS -DNLMCONV_SPARC"
;;
esac
+
case $targ in
*-*-hms*) BUILD_SRCONV='$(SRCONV_PROG)' ;;
esac
+
case $targ in
arm-epoc-pe*)
BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)'
BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)'
BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)'
;;
- thumb-*-pe*)
- BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)'
- if test -z "$DLLTOOL_DEFAULT"; then
- DLLTOOL_DEFAULT="-DDLLTOOL_DEFAULT_ARM"
- fi
- DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_ARM"
- BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)'
- BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)'
- ;;
x86_64-*-mingw*)
BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)'
if test -z "$DLLTOOL_DEFAULT"; then
BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)'
;;
powerpc*-*-linux* | powerpc*-*-elf* | powerpc*-*-eabi*)
- BUILD_INSTALL_MISC="${BUILD_INSTALL_MISC} embedspu"
+ case "$BUILD_INSTALL_MISC" in
+ *embedspu*) ;;
+ *) BUILD_INSTALL_MISC="${BUILD_INSTALL_MISC} embedspu"
+ esac
;;
sh*-*-pe)
BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)'
OBJDUMP_DEFS="-DSKIP_ZEROES=256 -DSKIP_ZEROES_AT_END=0"
;;
esac
+
+ # Add objdump private vectors.
+ case $targ in
+ powerpc-*-aix*)
+ od_vectors="$od_vectors objdump_private_desc_xcoff"
+ ;;
+ *-*-darwin*)
+ od_vectors="$od_vectors objdump_private_desc_mach_o"
+ ;;
+ esac
fi
done
+# Uniq objdump private vector, build objdump target ofiles.
+od_files=
+f=""
+for i in $od_vectors ; do
+ case " $f " in
+ *" $i "*) ;;
+ *)
+ f="$f $i"
+ OBJDUMP_PRIVATE_VECTORS="$OBJDUMP_PRIVATE_VECTORS &$i,"
+ case $i in
+ objdump_private_desc_xcoff)
+ od_files="$od_files od-xcoff" ;;
+ objdump_private_desc_mach_o)
+ od_files="$od_files od-macho" ;;
+ *) as_fn_error "*** unknown private vector $i" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+done
+
+# Uniq objdump target ofiles
+f=""
+for i in $od_files ; do
+ case " $f " in
+ *" $i "*) ;;
+ *)
+ f="$f $i"
+ OBJDUMP_PRIVATE_OFILES="$OBJDUMP_PRIVATE_OFILES $i.$objext"
+ ;;
+ esac
+done
+
DLLTOOL_DEFS="$DLLTOOL_DEFS $DLLTOOL_DEFAULT"
if test "${with_windres+set}" = set; then
BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)'
fi
+OBJDUMP_DEFS="${OBJDUMP_DEFS} -DOBJDUMP_PRIVATE_VECTORS=\"${OBJDUMP_PRIVATE_VECTORS}\""
+
+
projects / deliverable / binutils-gdb.git / blobdiff