gas/
[deliverable/binutils-gdb.git] / binutils / configure
index b191a616b07fa2f478b725efd7e9fef0aaf4ccb8..98e26d0069e623eadc068a98ca2e1f455cdc2a62 100755 (executable)
@@ -604,6 +604,7 @@ LTLIBOBJS
 LIBOBJS
 EMULATION_VECTOR
 EMULATION
+OBJDUMP_PRIVATE_OFILES
 OBJDUMP_DEFS
 BUILD_INSTALL_MISC
 BUILD_MISC
@@ -770,10 +771,12 @@ enable_fast_install
 with_gnu_ld
 enable_libtool_lock
 enable_targets
+enable_deterministic_archives
 enable_werror
 enable_build_warnings
 enable_nls
 enable_maintainer_mode
+with_zlib
 enable_rpath
 with_libiconv_prefix
 '
@@ -1416,6 +1419,8 @@ Optional Features:
                           optimize for fast installation [default=yes]
   --disable-libtool-lock  avoid locking (might break parallel builds)
   --enable-targets        alternative target configurations
+  --enable-deterministic-archives
+                          ar and ranlib default to -D behavior
   --enable-werror         treat compile warnings as errors
   --enable-build-warnings enable build-time compiler warnings
   --disable-nls           do not use Native Language Support
@@ -1429,6 +1434,7 @@ Optional Packages:
   --with-pic              try to use only PIC/non-PIC objects [default=use
                           both]
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-zlib             include zlib support (auto/yes/no) default=auto
   --with-gnu-ld           assume the C compiler uses GNU ld default=no
   --with-libiconv-prefix[=DIR]  search for libiconv in DIR/include and DIR/lib
   --without-libiconv-prefix     don't search for libiconv in includedir and libdir
@@ -11198,7 +11204,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11201 "configure"
+#line 11207 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11304,7 +11310,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11307 "configure"
+#line 11313 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11552,6 +11558,25 @@ if test "${enable_targets+set}" = set; then :
 esac
 fi
 
+# Check whether --enable-deterministic-archives was given.
+if test "${enable_deterministic_archives+set}" = set; then :
+  enableval=$enable_deterministic_archives;
+if test "${enableval}" = no; then
+  default_ar_deterministic=0
+else
+  default_ar_deterministic=1
+fi
+else
+  default_ar_deterministic=0
+fi
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define DEFAULT_AR_DETERMINISTIC $default_ar_deterministic
+_ACEOF
+
+
 
 GCC_WARN_CFLAGS="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11629,6 +11654,8 @@ fi
 ac_config_headers="$ac_config_headers config.h:config.in"
 
 
+
+
 if test -z "$target" ; then
     as_fn_error "Unrecognized target system type; please check config.sub." "$LINENO" 5
 fi
@@ -11840,7 +11867,7 @@ if test "$LEX" = :; then
   LEX=${am_missing_run}flex
 fi
 
-ALL_LINGUAS="da es fi fr id ja ro ru rw sk sv tr uk vi zh_CN zh_TW bg"
+ALL_LINGUAS="bg da es fi fr id it ja ro ru rw sk sv tr uk vi zh_CN zh_TW"
 # If we haven't got the data from the intl directory,
 # assume NLS is disabled.
 USE_NLS=no
@@ -12411,7 +12438,7 @@ case "${host}" in
 esac
 
 
-for ac_header in string.h strings.h stdlib.h unistd.h fcntl.h sys/file.h limits.h sys/param.h
+for ac_header in string.h strings.h stdlib.h unistd.h fcntl.h sys/file.h limits.h locale.h sys/param.h
 do :
   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
 ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
@@ -12466,6 +12493,38 @@ $as_echo "#define HAVE_SYS_WAIT_H 1" >>confdefs.h
 
 fi
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether string.h and strings.h may both be included" >&5
+$as_echo_n "checking whether string.h and strings.h may both be included... " >&6; }
+if test "${gcc_cv_header_string+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+#include <strings.h>
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gcc_cv_header_string=yes
+else
+  gcc_cv_header_string=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_header_string" >&5
+$as_echo "$gcc_cv_header_string" >&6; }
+if test $gcc_cv_header_string = yes; then
+
+$as_echo "#define STRING_WITH_STRINGS 1" >>confdefs.h
+
+fi
+
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5
@@ -12656,7 +12715,7 @@ _ACEOF
 
 fi
 
-for ac_func in sbrk utimes setmode getc_unlocked strcoll
+for ac_func in sbrk utimes setmode getc_unlocked strcoll setlocale
 do :
   as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
 ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
@@ -12742,6 +12801,40 @@ if test "$ac_res" != no; then :
 fi
 
 
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LC_MESSAGES" >&5
+$as_echo_n "checking for LC_MESSAGES... " >&6; }
+if test "${am_cv_val_LC_MESSAGES+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <locale.h>
+int
+main ()
+{
+return LC_MESSAGES
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  am_cv_val_LC_MESSAGES=yes
+else
+  am_cv_val_LC_MESSAGES=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_val_LC_MESSAGES" >&5
+$as_echo "$am_cv_val_LC_MESSAGES" >&6; }
+  if test $am_cv_val_LC_MESSAGES = yes; then
+
+$as_echo "#define HAVE_LC_MESSAGES 1" >>confdefs.h
+
+  fi
+
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for time_t in time.h" >&5
 $as_echo_n "checking for time_t in time.h... " >&6; }
 if test "${bu_cv_decl_time_t_time_h+set}" = set; then :
@@ -12971,7 +13064,19 @@ _ACEOF
 # Link in zlib if we can.  This allows us to read compressed debug
 # sections.  This is used only by readelf.c (objdump uses bfd for
 # reading compressed sections).
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
+
+  # See if the user specified whether he wants zlib support or not.
+
+# Check whether --with-zlib was given.
+if test "${with_zlib+set}" = set; then :
+  withval=$with_zlib;
+else
+  with_zlib=auto
+fi
+
+
+  if test "$with_zlib" != "no"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
 $as_echo_n "checking for library containing zlibVersion... " >&6; }
 if test "${ac_cv_search_zlibVersion+set}" = set; then :
   $as_echo_n "(cached) " >&6
@@ -13038,6 +13143,11 @@ done
 
 fi
 
+    if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
+      as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
+    fi
+  fi
+
 
 
 case "${host}" in
@@ -13779,6 +13889,9 @@ BUILD_DLLWRAP=
 BUILD_MISC=
 BUILD_INSTALL_MISC=
 OBJDUMP_DEFS=
+OBJDUMP_PRIVATE_VECTORS=
+OBJDUMP_PRIVATE_OFILES=
+od_vectors=
 
 for targ in $target $canon_targets
 do
@@ -13796,6 +13909,7 @@ do
        fi
        DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_I386"
        BUILD_DLLWRAP='$(DLLWRAP_PROG)$(EXEEXT)'
+       od_vectors="$od_vectors objdump_private_desc_xcoff"
     else
        case $targ in
        i[3-7]86*-*-netware*)
          NLMCONV_DEFS="$NLMCONV_DEFS -DNLMCONV_SPARC"
          ;;
        esac
+
        case $targ in
        *-*-hms*) BUILD_SRCONV='$(SRCONV_PROG)' ;;
        esac
+
        case $targ in
        arm-epoc-pe*)
          BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)'
          BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)'
          ;;
        powerpc*-*-linux* | powerpc*-*-elf* | powerpc*-*-eabi*)
-         BUILD_INSTALL_MISC="${BUILD_INSTALL_MISC} embedspu"
+         case "$BUILD_INSTALL_MISC" in
+           *embedspu*) ;;
+           *) BUILD_INSTALL_MISC="${BUILD_INSTALL_MISC} embedspu"
+         esac
          ;;
        sh*-*-pe)
          BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)'
          OBJDUMP_DEFS="-DSKIP_ZEROES=256 -DSKIP_ZEROES_AT_END=0"
          ;;
        esac
+
+       # Add objdump private vectors.
+       case $targ in
+       powerpc-*-aix*)
+         od_vectors="$od_vectors objdump_private_desc_xcoff"
+         ;;
+        *-*-darwin*)
+         od_vectors="$od_vectors objdump_private_desc_mach_o"
+         ;;
+       esac
     fi
 done
 
+# Uniq objdump private vector, build objdump target ofiles.
+od_files=
+f=""
+for i in $od_vectors ; do
+    case " $f " in
+    *" $i "*) ;;
+    *)
+       f="$f $i"
+       OBJDUMP_PRIVATE_VECTORS="$OBJDUMP_PRIVATE_VECTORS &$i,"
+       case $i in
+       objdump_private_desc_xcoff)
+           od_files="$od_files od-xcoff" ;;
+       objdump_private_desc_mach_o)
+           od_files="$od_files od-macho" ;;
+       *) as_fn_error "*** unknown private vector $i" "$LINENO" 5 ;;
+       esac
+       ;;
+    esac
+done
+
+# Uniq objdump target ofiles
+f=""
+for i in $od_files ; do
+    case " $f " in
+    *" $i "*) ;;
+    *)
+       f="$f $i"
+       OBJDUMP_PRIVATE_OFILES="$OBJDUMP_PRIVATE_OFILES $i.$objext"
+       ;;
+    esac
+done
+
 DLLTOOL_DEFS="$DLLTOOL_DEFS $DLLTOOL_DEFAULT"
 
 if test "${with_windres+set}" = set; then
@@ -13944,6 +14105,9 @@ if test "${with_windmc+set}" = set; then
          BUILD_WINDMC='$(WINDMC_PROG)$(EXEEXT)'
 fi
 
+OBJDUMP_DEFS="${OBJDUMP_DEFS} -DOBJDUMP_PRIVATE_VECTORS=\"${OBJDUMP_PRIVATE_VECTORS}\""
+
+
 
 
 
This page took 0.029188 seconds and 4 git commands to generate.