AC_PREREQ(2.5)
AC_INIT(ar.c)
+AC_CANONICAL_SYSTEM
+
+AM_INIT_AUTOMAKE(binutils, 2.9.4)
+
+AM_PROG_LIBTOOL
+
AC_ARG_ENABLE(targets,
[ --enable-targets alternative target configurations],
[case "${enableval}" in
no) enable_targets= ;;
*) enable_targets=$enableval ;;
esac])dnl
-AC_ARG_ENABLE(shared,
-[ --enable-shared build shared BFD library],
-[case "${enableval}" in
- yes) shared=true shared_bfd=true shared_opcodes=true ;;
- no) shared=false ;;
- *bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;;
- *opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;;
- *bfd*) shared=true shared_bfd=true ;;
- *opcodes*) shared=true shared_opcodes=true ;;
- *) shared=false ;;
-esac])dnl
AC_ARG_ENABLE(commonbfdlib,
[ --enable-commonbfdlib build shared BFD/opcodes/libiberty library],
[case "${enableval}" in
*) AC_MSG_ERROR([bad value ${enableval} for BFD commonbfdlib option]) ;;
esac])dnl
-AC_CONFIG_HEADER(config.h:config.in)
+AM_CONFIG_HEADER(config.h:config.in)
-AC_CONFIG_AUX_DIR(`cd $srcdir/..; pwd`)
-AC_CANONICAL_SYSTEM
if test -z "$target" ; then
AC_MSG_ERROR(Unrecognized target system type; please check config.sub.)
fi
if test -z "$host" ; then
AC_MSG_ERROR(Unrecognized host system type; please check config.sub.)
fi
-AC_ARG_PROGRAM
+
+AC_PROG_CC
+
+AC_PROG_YACC
+AM_PROG_LEX
+
+ALL_LINGUAS=
+CY_GNU_GETTEXT
+
+AM_MAINTAINER_MODE
+AM_CYGWIN32
+AM_EXEEXT
# host-specific stuff:
HDEFINES=
-HLDFLAGS=
-HLDENV=
-RPATH_ENVVAR=LD_LIBRARY_PATH
-
-AC_PROG_CC
. ${srcdir}/../bfd/configure.host
AC_SUBST(HDEFINES)
-AC_SUBST(HLDFLAGS)
-AC_SUBST(HLDENV)
-AC_SUBST(RPATH_ENVVAR)
AR=${AR-ar}
AC_SUBST(AR)
AC_PROG_RANLIB
-AC_PROG_INSTALL
-
-# For most hosts we can use a simple definition to pick up the BFD and
-# opcodes libraries. However, if we are building shared libraries, we
-# need to handle some hosts specially.
-BFDLIB='-L../bfd -lbfd'
-OPCODES='-L../opcodes -lopcodes'
-
-case "${host}" in
-*-*-sunos*)
- # On SunOS, we must link against the name we are going to install,
- # not -lbfd, since SunOS does not support SONAME.
- if test "${shared_bfd}" = "true"; then
- BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
- fi
- if test "${shared_opcodes}" = "true"; then
- OPCODES='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
- fi
- ;;
-alpha*-*-osf*)
- # On Alpha OSF/1, the native linker searches all the -L
- # directories for any LIB.so files, and only then searches for any
- # LIB.a files. That means that if there is an installed
- # libbfd.so, but this build is not done with --enable-shared, the
- # link will wind up being against the install libbfd.so rather
- # than the newly built libbfd. To avoid this, we must explicitly
- # link against libbfd.a when --enable-shared is not used.
- if test "${shared_bfd}" != "true"; then
- BFDLIB='../bfd/libbfd.a'
- fi
- if test "${shared_opcodes}" != "true"; then
- OPCODES='../opcodes/libopcodes.a'
- fi
- ;;
-esac
-
-if test "${commonbfdlib}" = "true"; then
- # when a shared libbfd is built with --enable-commonbfdlib,
- # all of libopcodes is available in libbfd.so
- OPCODES=
-fi
-
-AC_SUBST(BFDLIB)
-AC_SUBST(OPCODES)
+AM_PROG_INSTALL
BFD_CC_FOR_BUILD
AC_HEADER_SYS_WAIT
AC_FUNC_ALLOCA
AC_CHECK_FUNCS(sbrk utimes)
-dnl Temporary workaround for bug in autoconf 2.12. When the bug is
-dnl fixed, we can just call AC_FUNC_VFORK in all cases.
-if test "x$cross_compiling" = "xno"; then
- AC_FUNC_VFORK
-else
- AC_CHECK_FUNC(vfork, , AC_DEFINE(vfork, fork))
-fi
AC_MSG_CHECKING(for time_t in time.h)
AC_CACHE_VAL(bu_cv_decl_time_t_time_h,
if test -n "$enable_targets"; then
for targ in `echo $enable_targets | sed 's/,/ /g'`
do
- result=`$ac_config_sub $targ 2>/dev/null`
+ result=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $targ 2>/dev/null`
if test -n "$result"; then
canon_targets="$canon_targets $result"
else
BUILD_SRCONV=
BUILD_DLLTOOL=
DLLTOOL_DEFS=
+BUILD_WINDRES=
for targ in $target $canon_targets
do
if test "x$targ" = "xall"; then
all_targets=true
- BUILD_NLMCONV='$(NLMCONV_PROG)'
+ BUILD_NLMCONV='$(NLMCONV_PROG)$(EXEEXT)'
BUILD_SRCONV='$(SRCONV_PROG)'
NLMCONV_DEFS="-DNLMCONV_I386 -DNLMCONV_ALPHA -DNLMCONV_POWERPC -DNLMCONV_SPARC"
else
changequote(,)dnl
i[3456]86*-*-netware*)
changequote([,])dnl
- BUILD_NLMCONV='$(NLMCONV_PROG)'
+ BUILD_NLMCONV='$(NLMCONV_PROG)$(EXEEXT)'
NLMCONV_DEFS="$NLMCONV_DEFS -DNLMCONV_I386"
;;
alpha*-*-netware*)
- BUILD_NLMCONV='$(NLMCONV_PROG)'
+ BUILD_NLMCONV='$(NLMCONV_PROG)$(EXEEXT)'
NLMCONV_DEFS="$NLMCONV_DEFS -DNLMCONV_ALPHA"
;;
powerpc*-*-netware*)
- BUILD_NLMCONV='$(NLMCONV_PROG)'
+ BUILD_NLMCONV='$(NLMCONV_PROG)$(EXEEXT)'
NLMCONV_DEFS="$NLMCONV_DEFS -DNLMCONV_POWERPC"
;;
sparc*-*-netware*)
- BUILD_NLMCONV='$(NLMCONV_PROG)'
+ BUILD_NLMCONV='$(NLMCONV_PROG)$(EXEEXT)'
NLMCONV_DEFS="$NLMCONV_DEFS -DNLMCONV_SPARC"
;;
esac
esac
case $targ in
arm-*pe*)
- BUILD_DLLTOOL='$(DLLTOOL_PROG)'
+ thumb-*pe*)
+ BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)'
DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_ARM"
+ BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)'
;;
changequote(,)dnl
- i[3-6]86-*pe* | i[3-6]86-*-cygwin32)
+ i[3-6]86-*pe* | i[3-6]86-*-cygwin32* | i[3-6]86-*-mingw32*)
changequote([,])dnl
- BUILD_DLLTOOL='$(DLLTOOL_PROG)'
+ BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)'
DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_I386"
+ BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)'
;;
powerpc*-*-*pe* | powerpc*-*-cygwin32)
- BUILD_DLLTOOL='$(DLLTOOL_PROG)'
+ BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)'
DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_PPC"
+ BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)'
;;
esac
fi
AC_SUBST(BUILD_SRCONV)
AC_SUBST(BUILD_DLLTOOL)
AC_SUBST(DLLTOOL_DEFS)
+AC_SUBST(BUILD_WINDRES)
+
+AC_DEFINE_UNQUOTED(TARGET, "${target}")
targ=$target
. $srcdir/../bfd/config.bfd
fi
AC_SUBST(UNDERSCORE)
-AC_OUTPUT(Makefile,
-[case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac])
+AC_OUTPUT(Makefile po/Makefile.in:po/Make-in,
+[sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile])