@item N
The symbol is a debugging symbol.
+@item n
+The symbol is in the read-only data section.
+
@item p
-The symbols is in a stack unwind section.
+The symbol is in a stack unwind section.
@item R
@itemx r
[@option{--change-section-vma} @var{sectionpattern}@{=,+,-@}@var{val}]
[@option{--change-warnings}] [@option{--no-change-warnings}]
[@option{--set-section-flags} @var{sectionpattern}=@var{flags}]
+ [@option{--set-section-alignment} @var{sectionpattern}=@var{align}]
[@option{--add-section} @var{sectionname}=@var{filename}]
[@option{--dump-section} @var{sectionname}=@var{filename}]
[@option{--update-section} @var{sectionname}=@var{filename}]
[@option{--elf-stt-common=@var{val}}]
[@option{--merge-notes}]
[@option{--no-merge-notes}]
+ [@option{--verilog-data-width=@var{val}}]
[@option{-v}|@option{--verbose}]
[@option{-V}|@option{--version}]
[@option{--help}] [@option{--info}]
contents--just remove the section instead. Not all flags are
meaningful for all object file formats.
+@item --set-section-alignment @var{sectionpattern}=@var{align}
+Set the alignment for any sections matching @var{sectionpattern}.
+@var{align} specifies the alignment in bytes and must be a power of
+two, i.e. 1, 2, 4, 8@dots{}.
+
@item --add-section @var{sectionname}=@var{filename}
Add a new section named @var{sectionname} while copying the file. The
contents of the new section are taken from the file @var{filename}. The
@smallexample
objcopy --add-gnu-debuglink=foo.debug
@end smallexample
-
+
At debug time the debugger will attempt to look for the separate debug
info file in a set of known locations. The exact set of these
locations varies depending upon the distribution being used, but it
[This option is specific to PE targets.]
@item --section-alignment @var{num}
-Sets the section alignment. Sections in memory will always begin at
-addresses which are a multiple of this number. Defaults to 0x1000.
+Sets the section alignment field in the PE header. Sections in memory
+will always begin at addresses which are a multiple of this number.
+Defaults to 0x1000.
[This option is specific to PE targets.]
@item --stack @var{reserve}
@itemx --version
Show the version number of @command{objcopy}.
+@item --verilog-data-width=@var{bytes}
+For Verilog output, this options controls the number of bytes
+converted for each output data element. The input target controls the
+endianness of the conversion.
+
@item -v
@itemx --verbose
Verbose output: list all object files modified. In the case of
@cindex object file information
@kindex objdump
-@c man title objdump display information from object files.
+@c man title objdump display information from object files
@smallexample
@c man begin SYNOPSIS objdump
[@option{-j} @var{section}|@option{--section=}@var{section}]
[@option{-l}|@option{--line-numbers}]
[@option{-S}|@option{--source}]
+ [@option{--source-comment}[=@var{text}]]
[@option{-m} @var{machine}|@option{--architecture=}@var{machine}]
[@option{-M} @var{options}|@option{--disassembler-options=}@var{options}]
[@option{-p}|@option{--private-headers}]
[@option{-s}|@option{--full-contents}]
[@option{-W[lLiaprmfFsoRtUuTgAckK]}|
@option{--dwarf}[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]]
+ [@option{--ctf=}@var{section}]
[@option{-G}|@option{--stabs}]
[@option{-t}|@option{--syms}]
[@option{-T}|@option{--dynamic-syms}]
[@option{--adjust-vma=}@var{offset}]
[@option{--dwarf-depth=@var{n}}]
[@option{--dwarf-start=@var{n}}]
+ [@option{--ctf-parent=}@var{section}]
[@option{--no-recurse-limit}|@option{--recurse-limit}]
[@option{--special-syms}]
[@option{--prefix=}@var{prefix}]
@itemx addr16
@itemx data32
@itemx data16
-Specify the default address size and operand size. These four options
+Specify the default address size and operand size. These five options
will be overridden if @code{x86-64}, @code{i386} or @code{i8086}
appear later in the option string.
Display source code intermixed with disassembly, if possible. Implies
@option{-d}.
+@item --source-comment[=@var{txt}]
+@cindex source disassembly
+@cindex disassembly, with source
+Like the @option{-S} option, but all source code lines are displayed
+with a prefix of @var{txt}. Typically @var{txt} will be a comment
+string which can be used to distinguish the assembler code from the
+source code. If @var{txt} is not provided then a default string of
+@var{``# ``} (hash followed by a space), will be used.
+
@item --prefix=@var{prefix}
@cindex Add prefix to absolute paths
Specify @var{prefix} to add to the absolute paths when used with
@item --dwarf-check
Enable additional checks for consistency of Dwarf information.
+@include ctf.options.texi
+
@item -G
@itemx --stabs
@cindex stab
@cindex archive contents
@cindex symbol index
-@c man title ranlib generate index to archive.
+@c man title ranlib generate an index to an archive
@smallexample
@c man begin SYNOPSIS ranlib
@kindex size
@cindex section sizes
-@c man title size list section sizes and total size.
+@c man title size list section sizes and total size of binary files
@smallexample
@c man begin SYNOPSIS size
@c man begin DESCRIPTION size
-The @sc{gnu} @command{size} utility lists the section sizes---and the total
-size---for each of the object or archive files @var{objfile} in its
-argument list. By default, one line of output is generated for each
-object file or each module in an archive.
+The @sc{gnu} @command{size} utility lists the section sizes and the total
+size for each of the binary files @var{objfile} on its argument list.
+By default, one line of output is generated for each file or each
+module if the file is an archive.
-@var{objfile}@dots{} are the object files to be examined.
-If none are specified, the file @code{a.out} will be used.
+@var{objfile}@dots{} are the files to be examined. If none are
+specified, the file @code{a.out} will be used instead.
@c man end
@cindex printing strings
@cindex strings, printing
-@c man title strings print the strings of printable characters in files.
+@c man title strings print the sequences of printable characters in files
@smallexample
@c man begin SYNOPSIS strings
For backwards compatibility any file that occurs after a command-line
option of just @option{-} will also be scanned in full, regardless of
-the presence of any @option{-d} option.
+the presence of any @option{-d} option.
@command{strings} is mainly useful for determining the contents of
non-text files.
@cindex discarding symbols
@cindex symbols, discarding
-@c man title strip Discard symbols from object files.
+@c man title strip discard symbols and other data from object files
@smallexample
@c man begin SYNOPSIS strip
@itemx --no-merge-notes
For ELF files, attempt (or do not attempt) to reduce the size of any
SHT_NOTE type sections by removing duplicate notes. The default is to
-attempt this reduction.
+attempt this reduction unless stripping debug or DWO information.
@item -N @var{symbolname}
@itemx --strip-symbol=@var{symbolname}
@kindex c++filt
@cindex demangling C++ symbols
-@c man title cxxfilt Demangle C++ and Java symbols.
+@c man title cxxfilt demangle C++ and Java symbols
@smallexample
@c man begin SYNOPSIS cxxfilt
@kindex addr2line
@cindex address to file name and line number
-@c man title addr2line convert addresses into file names and line numbers.
+@c man title addr2line convert addresses into file names and line numbers
@smallexample
@c man begin SYNOPSIS addr2line
utilities, since it is only useful for Windows targets.
@end quotation
-@c man title windmc generates Windows message resources.
+@c man title windmc generates Windows message resources
@smallexample
@c man begin SYNOPSIS windmc
utilities, since it is only useful for Windows targets.
@end quotation
-@c man title windres manipulate Windows resources.
+@c man title windres manipulate Windows resources
@smallexample
@c man begin SYNOPSIS windres
support DLLs.
@end quotation
-@c man title dlltool Create files needed to build and use DLLs.
+@c man title dlltool create files needed to build and use DLLs
@smallexample
@c man begin SYNOPSIS dlltool
@cindex ELF file information
@kindex readelf
-@c man title readelf Displays information about ELF files.
+@c man title readelf display information about ELF files
@smallexample
@c man begin SYNOPSIS readelf
@option{--debug-dump}[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]]
[@option{--dwarf-depth=@var{n}}]
[@option{--dwarf-start=@var{n}}]
+ [@option{--ctf=}@var{section}]
+ [@option{--ctf-parent=}@var{section}]
+ [@option{--ctf-symbols=}@var{section}]
+ [@option{--ctf-strings=}@var{section}]
[@option{-I}|@option{--histogram}]
[@option{-v}|@option{--version}]
[@option{-W}|@option{--wide}]
@itemx --debug-dump[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]
@include debug.options.texi
+@include ctf.options.texi
+@item --ctf-symbols=@var{section}
+@item --ctf-strings=@var{section}
+Specify the name of another section from which the CTF file can inherit
+strings and symbols. By default, the @code{.symtab} and its linked
+string table are used.
+
+If either of @option{--ctf-symbols} or @option{--ctf-strings} is specified, the
+other must be specified as well.
+
@item -I
@itemx --histogram
Display a histogram of bucket list lengths when displaying the contents
@cindex Update ELF header
@kindex elfedit
-@c man title elfedit Update ELF header and program property of ELF files.
+@c man title elfedit update ELF header and program property of ELF files
@smallexample
@c man begin SYNOPSIS elfedit