[@option{--plugin} @var{name}]
[@option{--no-recurse-limit}|@option{--recurse-limit}]]
[@option{--size-sort}] [@option{--special-syms}]
- [@option{--synthetic}] [@option{--with-symbol-versions}] [@option{--target=}@var{bfdname}]
+ [@option{--synthetic}] [@option{--target=}@var{bfdname}]
[@var{objfile}@dots{}]
@c man end
@end smallexample
behavior is system dependent.
@item C
+@itemx c
The symbol is common. Common symbols are uninitialized data. When
linking, multiple common symbols may appear with the same name. If the
symbol is defined anywhere, the common symbols are treated as undefined
For more details on common symbols, see the discussion of
--warn-common in @ref{Options,,Linker options,ld.info,The GNU linker}.
@end ifclear
+The lower case @var{c} character is used when the symbol is in a
+special section for small commons.
@item D
@itemx d
@end table
@item
-The symbol name.
+The symbol name. If a symbol has version information associated with it,
+then the version information is displayed as well. If the versioned
+symbol is undefined or hidden from linker, the version string is displayed
+as a suffix to the symbol name, preceded by an @@ character. For example
+@samp{foo@@VER_1}. If the version is the default version to be used when
+resolving unversioned references to the symbol, then it is displayed as a
+suffix preceded by two @@ characters. For example @samp{foo@@@@VER_2}.
@end itemize
@c man end
@itemx --no-recursion-limit
Enables or disables a limit on the amount of recursion performed
whilst demangling strings. Since the name mangling formats allow for
-an inifinite level of recursion it is possible to create strings whose
+an infinite level of recursion it is possible to create strings whose
decoding will exhaust the amount of stack space available on the host
machine, triggering a memory fault. The limit tries to prevent this
from happening by restricting recursion to 2048 levels of nesting.
created by the linker for various purposes. They are not shown by
default since they are not part of the binary's original source code.
-@item --with-symbol-versions
-Enables the display of symbol version information if any exists. The
-version string is displayed as a suffix to the symbol name, preceeded by
-an @@ character. For example @samp{foo@@VER_1}. If the version is
-the default version to be used when resolving unversioned references
-to the symbol then it is displayed as a suffix preceeded by two @@
-characters. For example @samp{foo@@@@VER_2}.
-
@item --target=@var{bfdname}
@cindex object code format
Specify an object code format other than your system's default format.
--only-section=.text.* --only-section=!.text.foo
@end smallexample
-will copy all sectinos maching '.text.*' but not the section
+will copy all sectinos matching '.text.*' but not the section
'.text.foo'.
@item -R @var{sectionpattern}
@item -S
@itemx --strip-all
Do not copy relocation and symbol information from the source file.
+Also deletes debug sections.
@item -g
@itemx --strip-debug
Do not copy debugging symbols or sections from the source file.
@item --strip-unneeded
-Strip all symbols that are not needed for relocation processing.
+Remove all symbols that are not needed for relocation processing in
+addition to debugging symbols and sections stripped by
+@option{--strip-debug}.
@item -K @var{symbolname}
@itemx --keep-symbol=@var{symbolname}
filled in with the value specified by @option{--gap-fill} (default zero).
@item --set-start @var{val}
-Set the start address of the new file to @var{val}. Not all object file
-formats support setting the start address.
+Set the start address (also known as the entry address) of the new
+file to @var{val}. Not all object file formats support setting the
+start address.
@item --change-start @var{incr}
@itemx --adjust-start @var{incr}
@cindex changing start address
-Change the start address by adding @var{incr}. Not all object file
-formats support setting the start address.
+Change the start address (also known as the entry address) by adding
+@var{incr}. Not all object file formats support setting the start
+address.
@item --change-addresses @var{incr}
@itemx --adjust-vma @var{incr}
@samp{contents} flag for a section which does not have contents, but it
is not meaningful to clear the @samp{contents} flag of a section which
does have contents--just remove the section instead. Not all flags are
-meaningful for all object file formats.
+meaningful for all object file formats. In particular the
+@samp{share} flag is only meaningful for COFF format files and not for
+ELF format files.
@item --set-section-alignment @var{sectionpattern}=@var{align}
Set the alignment for any sections matching @var{sectionpattern}.
changing the section's flags to @var{flags} in the process. This has
the advantage over using a linker script to perform the rename in that
the output stays as an object file and does not become a linked
-executable.
+executable. This option accepts the same set of flags as the
+@option{--sect-section-flags} option.
This option is particularly helpful when the input format is binary,
since this will always create a section called .data. If for example,
[@option{-r}|@option{--reloc}]
[@option{-R}|@option{--dynamic-reloc}]
[@option{-s}|@option{--full-contents}]
- [@option{-W[lLiaprmfFsoRtUuTgAckK]}|
- @option{--dwarf}[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]]
+ [@option{-W[lLiaprmfFsoORtUuTgAckK]}|
+ @option{--dwarf}[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=str-offsets,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]]
[@option{--ctf=}@var{section}]
[@option{-G}|@option{--stabs}]
[@option{-t}|@option{--syms}]
[@option{-w}|@option{--wide}]
[@option{--start-address=}@var{address}]
[@option{--stop-address=}@var{address}]
+ [@option{--no-addresses}]
[@option{--prefix-addresses}]
[@option{--[no-]show-raw-insn}]
[@option{--adjust-vma=}@var{offset}]
@itemx --no-recursion-limit
Enables or disables a limit on the amount of recursion performed
whilst demangling strings. Since the name mangling formats allow for
-an inifinite level of recursion it is possible to create strings whose
+an infinite level of recursion it is possible to create strings whose
decoding will exhaust the amount of stack space available on the host
machine, triggering a memory fault. The limit tries to prevent this
from happening by restricting recursion to 2048 levels of nesting.
then any symbol tables in linked debug info files will be read in and
used when disassembling.
+@item --no-addresses
+When disassembling, don't print addresses on each line or for symbols
+and relocation offsets. In combination with @option{--no-show-raw-insn}
+this may be useful for comparing compiler output.
+
@item --prefix-addresses
When disassembling, print the complete address on each line. This is
the older disassembly format.
disasssembly using @option{-M notes}.
For the x86, some of the options duplicate functions of the @option{-m}
-switch, but allow finer grained control. Multiple selections from the
-following may be specified as a comma separated string.
+switch, but allow finer grained control.
@table @code
@item x86-64
@itemx i386
appear later in the option string.
@item suffix
-When in AT&T mode, instructs the disassembler to print a mnemonic
-suffix even when the suffix could be inferred by the operands.
+When in AT&T mode and also for a limited set of instructions when in Intel
+mode, instructs the disassembler to print a mnemonic suffix even when the
+suffix could be inferred by the operands or, for certain instructions, the
+execution mode's defaults.
@end table
For PowerPC, the @option{-M} argument @option{raw} selects
@option{e300}, @option{e500}, @option{e500mc}, @option{e500mc64},
@option{e500x2}, @option{e5500}, @option{e6500}, @option{efs},
@option{power4}, @option{power5}, @option{power6}, @option{power7},
-@option{power8}, @option{power9}, @option{ppc}, @option{ppc32},
-@option{ppc64}, @option{ppc64bridge}, @option{ppcps}, @option{pwr},
-@option{pwr2}, @option{pwr4}, @option{pwr5}, @option{pwr5x},
-@option{pwr6}, @option{pwr7}, @option{pwr8}, @option{pwr9},
+@option{power8}, @option{power9}, @option{power10}, @option{ppc},
+@option{ppc32}, @option{ppc64}, @option{ppc64bridge}, @option{ppcps},
+@option{pwr}, @option{pwr2}, @option{pwr4}, @option{pwr5}, @option{pwr5x},
+@option{pwr6}, @option{pwr7}, @option{pwr8}, @option{pwr9}, @option{pwr10},
@option{pwrx}, @option{titan}, and @option{vle}.
@option{32} and @option{64} modify the default or a prior CPU
selection, disabling and enabling 64-bit insns respectively. In
after it has previously been enabled then use
@option{visualize-jumps=off}.
-@item -W[lLiaprmfFsoRtUuTgAckK]
-@itemx --dwarf[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]
+@item -W[lLiaprmfFsoORtUuTgAckK]
+@itemx --dwarf[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=str-offsets,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]
@include debug.options.texi
@item --dwarf-check
in the symbol table, the @var{sec} number is the section number, the
@var{fl} value are the symbol's flag bits, the @var{ty} number is the
symbol's type, the @var{scl} number is the symbol's storage class and
-the @var{nx} value is the number of auxilary entries associated with
+the @var{nx} value is the number of auxiliary entries associated with
the symbol. The last two fields are the symbol's value and its name.
The other common output format, usually seen with ELF based files,
00000000 g .text 00000000 fred
@end smallexample
-Here the first number is the symbol's value (sometimes refered to as
+Here the first number is the symbol's value (sometimes referred to as
its address). The next field is actually a set of characters and
spaces indicating the flag bits that are set on the symbol. These
characters are described below. Next is the section with which the
Depending upon how the strings program was configured it will default
to either displaying all the printable sequences that it can find in
each file, or only those sequences that are in loadable, initialized
-data sections. If the file type in unrecognizable, or if strings is
+data sections. If the file type is unrecognizable, or if strings is
reading from stdin then it will always display all of the printable
sequences that it can find.
for more information.
@item --strip-unneeded
-Remove all symbols that are not needed for relocation processing.
+Remove all symbols that are not needed for relocation processing in
+addition to debugging symbols and sections stripped by
+@option{--strip-debug}.
@item -K @var{symbolname}
@itemx --keep-symbol=@var{symbolname}
@itemx --no-recursion-limit
Enables or disables a limit on the amount of recursion performed
whilst demangling strings. Since the name mangling formats allow for
-an inifinite level of recursion it is possible to create strings whose
+an infinite level of recursion it is possible to create strings whose
decoding will exhaust the amount of stack space available on the host
machine, triggering a memory fault. The limit tries to prevent this
from happening by restricting recursion to 2048 levels of nesting.
@itemx --no-recursion-limit
Enables or disables a limit on the amount of recursion performed
whilst demangling strings. Since the name mangling formats allow for
-an inifinite level of recursion it is possible to create strings whose
+an infinite level of recursion it is possible to create strings whose
decoding will exhaust the amount of stack space available on the host
machine, triggering a memory fault. The limit tries to prevent this
from happening by restricting recursion to 2048 levels of nesting.
[@option{-t}|@option{--section-details}]
[@option{-e}|@option{--headers}]
[@option{-s}|@option{--syms}|@option{--symbols}]
- [@option{--dyn-syms}]
+ [@option{--dyn-syms}|@option{--lto-syms}]
+ [@option{--demangle@var{=style}}|@option{--no-demangle}]
+ [@option{--recurse-limit}|@option{--no-recurse-limit}]
[@option{-n}|@option{--notes}]
[@option{-r}|@option{--relocs}]
[@option{-u}|@option{--unwind}]
[@option{-V}|@option{--version-info}]
[@option{-A}|@option{--arch-specific}]
[@option{-D}|@option{--use-dynamic}]
+ [@option{-L}|@option{--lint}|@option{--enable-checks}]
[@option{-x} <number or name>|@option{--hex-dump=}<number or name>]
[@option{-p} <number or name>|@option{--string-dump=}<number or name>]
[@option{-R} <number or name>|@option{--relocated-dump=}<number or name>]
[@option{-z}|@option{--decompress}]
[@option{-c}|@option{--archive-index}]
- [@option{-w[lLiaprmfFsoRtUuTgAckK]}|
- @option{--debug-dump}[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]]
+ [@option{-w[lLiaprmfFsoORtUuTgAckK]}|
+ @option{--debug-dump}[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=str-offsets,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]]
[@option{--dwarf-depth=@var{n}}]
[@option{--dwarf-start=@var{n}}]
[@option{--ctf=}@var{section}]
[@option{-I}|@option{--histogram}]
[@option{-v}|@option{--version}]
[@option{-W}|@option{--wide}]
+ [@option{-T}|@option{--silent-truncation}]
[@option{-H}|@option{--help}]
@var{elffile}@dots{}
@c man end
Displays the entries in symbol table section of the file, if it has one.
If a symbol has version information associated with it then this is
displayed as well. The version string is displayed as a suffix to the
-symbol name, preceeded by an @@ character. For example
+symbol name, preceded by an @@ character. For example
@samp{foo@@VER_1}. If the version is the default version to be used
when resolving unversioned references to the symbol then it is
-displayed as a suffix preceeded by two @@ characters. For example
+displayed as a suffix preceded by two @@ characters. For example
@samp{foo@@@@VER_2}.
@item --dyn-syms
has one. The output format is the same as the format used by the
@option{--syms} option.
+@item --lto-syms
+@cindex LTO symbol table
+Displays the contents of any LTO symbol tables in the file.
+
+@item -C
+@itemx --demangle[=@var{style}]
+@cindex demangling in nm
+Decode (@dfn{demangle}) low-level symbol names into user-level names.
+This makes C++ function names readable. Different compilers have
+different mangling styles. The optional demangling style argument can
+be used to choose an appropriate demangling style for your
+compiler. @xref{c++filt}, for more information on demangling.
+
+@item --no-demangle
+Do not demangle low-level symbol names. This is the default.
+
+@item --recurse-limit
+@itemx --no-recurse-limit
+@itemx --recursion-limit
+@itemx --no-recursion-limit
+Enables or disables a limit on the amount of recursion performed
+whilst demangling strings. Since the name mangling formats allow for
+an infinite level of recursion it is possible to create strings whose
+decoding will exhaust the amount of stack space available on the host
+machine, triggering a memory fault. The limit tries to prevent this
+from happening by restricting recursion to 2048 levels of nesting.
+
+The default is for this limit to be enabled, but disabling it may be
+necessary in order to demangle truly complicated names. Note however
+that if the recursion limit is disabled then stack exhaustion is
+possible and any bug reports about such an event will be rejected.
+
@item -e
@itemx --headers
Display all the headers in the file. Equivalent to @option{-h -l -S}.
When displaying relocations, this option makes @command{readelf}
display the dynamic relocations rather than the static relocations.
+@item -L
+@itemx --lint
+@itemx --enable-checks
+Displays warning messages about possible problems with the file(s)
+being examined. If used on its own then all of the contents of the
+file(s) will be examined. If used with one of the dumping options
+then the warning messages will only be produced for the things being
+displayed.
+
@item -x <number or name>
@itemx --hex-dump=<number or name>
Displays the contents of the indicated section as a hexadecimal bytes.
of binary archives. Performs the same function as the @option{t}
command to @command{ar}, but without using the BFD library. @xref{ar}.
-@item -w[lLiaprmfFsoRtUuTgAckK]
-@itemx --debug-dump[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]
+@item -w[lLiaprmfFsOoRtUuTgAckK]
+@itemx --debug-dump[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=str-offsets,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]
@include debug.options.texi
@include ctf.options.texi
@command{readelf} to print each section header resp. each segment one a
single line, which is far more readable on terminals wider than 80 columns.
+@item -T
+@itemx --silent-truncation
+Normally when readelf is displaying a symbol name, and it has to
+truncate the name to fit into an 80 column display, it will add a
+suffix of @code{[...]} to the name. This command line option
+disables this behaviour, allowing 5 more characters of the name to be
+displayed and restoring the old behaviour of readelf (prior to release
+2.35).
+
@item -H
@itemx --help
Display the command-line options understood by @command{readelf}.
projects / deliverable / binutils-gdb.git / blobdiff