* addr2line: (binutils)addr2line. Convert addresses to file and line
* nlmconv: (binutils)nlmconv. Converts object code into an NLM
* windres: (binutils)windres. Manipulate Windows resources
+* windmc: (binutils)windmc. Generator for Windows message resources
* dlltool: (binutils)dlltool. Create files needed to build and use DLLs
END-INFO-DIR-ENTRY
@end format
@end ifinfo
-@ifinfo
+@copying
@c man begin COPYRIGHT
Copyright @copyright{} 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
section entitled ``GNU Free Documentation License''.
@c man end
-@ignore
-Permission is granted to process this file through TeX and print the
-results, provided the printed document carries a copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
-
-@end ignore
-@end ifinfo
+@end copying
@synindex ky cp
@c
@c
@c Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
@c 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
-@c
+@c
@c This text may be freely distributed under the terms of the GNU
@c Free Documentation License.
@c
@titlepage
@finalout
@title The @sc{gnu} Binary Utilities
+@ifset VERSION_PACKAGE
+@subtitle @value{VERSION_PACKAGE}
+@end ifset
@subtitle Version @value{VERSION}
@sp 1
@subtitle @value{UPDATED}
section entitled ``GNU Free Documentation License''.
@end titlepage
+@contents
@node Top
@top Introduction
@cindex version
This brief manual contains documentation for the @sc{gnu} binary
-utilities (collectively version @value{VERSION}):
+utilities
+@ifset VERSION_PACKAGE
+@value{VERSION_PACKAGE}
+@end ifset
+version @value{VERSION}:
@iftex
@table @code
@item windres
Manipulate Windows resources
+@item windmc
+Genertor for Windows message resources
+
@item dlltool
Create the files needed to build and use Dynamic Link Libraries
@end table
* addr2line:: Convert addresses to file and line
* nlmconv:: Converts object code into an NLM
* windres:: Manipulate Windows resources
+* windmc:: Generator for Windows message resources
* dlltool:: Create files needed to build and use DLLs
* Common Options:: Command-line options for all utilities
* Selecting The Target System:: How these utilities determine the target.
The original files' contents, mode (permissions), timestamp, owner, and
group are preserved in the archive, and can be restored on
-extraction.
+extraction.
@cindex name length
@sc{gnu} @command{ar} can maintain archives whose members have names of any
The ordering of members in an archive can make a difference in how
programs are linked using the library, if a symbol is defined in more
-than one member.
+than one member.
If no modifiers are used with @code{m}, any members you name in the
@var{member} arguments are moved to the @emph{end} of the archive;
@item l
This modifier is accepted but not used.
@c whaffor ar l modifier??? presumably compat; with
-@c what???---doc@@cygnus.com, 25jan91
+@c what???---doc@@cygnus.com, 25jan91
@item N
Uses the @var{count} parameter. This is used if there are multiple
archive.
@table @code
-@item ADDLIB @var{archive}
+@item ADDLIB @var{archive}
@itemx ADDLIB @var{archive} (@var{module}, @var{module}, @dots{} @var{module})
Add all the contents of @var{archive} (or, if specified, each named
@var{module} from @var{archive}) to the current archive.
In the current archive, replace each existing @var{module} (named in
the @code{REPLACE} arguments) from files in the current working directory.
To execute this command without errors, both the file, and the module in
-the current archive, must exist.
+the current archive, must exist.
Requires prior use of @code{OPEN} or @code{CREATE}.
@item SAVE
Commit your changes to the current archive, and actually save it as a
file with the name specified in the last @code{CREATE} or @code{OPEN}
-command.
+command.
Requires prior use of @code{OPEN} or @code{CREATE}.
linking.
@item B
+@itemx b
The symbol is in the uninitialized data section (known as BSS).
@item C
@end ifclear
@item D
+@itemx d
The symbol is in the initialized data section.
@item G
+@itemx g
The symbol is in an initialized data section for small objects. Some
object file formats permit more efficient access to small data objects,
such as a global int variable as opposed to a large global array.
The symbol is an indirect reference to another symbol. This is a @sc{gnu}
extension to the a.out object file format which is rarely used.
+@item i
+The symbol is in a section specific to the implementation of DLLs.
+
@item N
The symbol is a debugging symbol.
+@item p
+The symbols is in a stack unwind section.
+
@item R
+@itemx r
The symbol is in a read only data section.
@item S
+@itemx s
The symbol is in an uninitialized data section for small objects.
@item T
+@itemx t
The symbol is in the text (code) section.
@item U
The symbol is undefined.
@item V
+@itemx v
The symbol is a weak object. When a weak defined symbol is linked with
a normal defined symbol, the normal defined symbol is used with no error.
When a weak undefined symbol is linked and the symbol is not defined,
-the value of the weak symbol becomes zero with no error.
+the value of the weak symbol becomes zero with no error. On some
+systems, uppercase indicates that a default value has been specified.
@item W
+@itemx w
The symbol is a weak symbol that has not been specifically tagged as a
weak object symbol. When a weak defined symbol is linked with a normal
defined symbol, the normal defined symbol is used with no error.
When a weak undefined symbol is linked and the symbol is not defined,
the value of the symbol is determined in a system-specific manner without
-error. On some systems, uppercase indicates that a default value has been
+error. On some systems, uppercase indicates that a default value has been
specified.
-
@item -
The symbol is a stabs symbol in an a.out object file. In this case, the
next values printed are the stabs other field, the stabs desc field, and
@table @env
@item -A
@itemx -o
-@itemx --print-file-name
+@itemx --print-file-name
@cindex input file name
@cindex file name
@cindex source file name
before all of its symbols.
@item -a
-@itemx --debug-syms
+@itemx --debug-syms
@cindex debugging symbols
Display all symbols, even debugger-only symbols; normally these are not
listed.
Decode (@dfn{demangle}) low-level symbol names into user-level names.
Besides removing any initial underscore prepended by the system, this
makes C++ function names readable. Different compilers have different
-mangling styles. The optional demangling style argument can be used to
-choose an appropriate demangling style for your compiler. @xref{c++filt},
+mangling styles. The optional demangling style argument can be used to
+choose an appropriate demangling style for your compiler. @xref{c++filt},
for more information on demangling.
@item --no-demangle
either upper or lower case.
@item -g
-@itemx --extern-only
+@itemx --extern-only
@cindex external symbols
Display only external symbols.
@item -n
@itemx -v
-@itemx --numeric-sort
+@itemx --numeric-sort
Sort symbols numerically by their addresses, rather than alphabetically
-by their names.
+by their names.
@item -p
-@itemx --no-sort
+@itemx --no-sort
@cindex sorting symbols
Do not bother to sort the symbols in any order; print them in the order
encountered.
contain definitions for which names.
@item -r
-@itemx --reverse-sort
+@itemx --reverse-sort
Reverse the order of the sort (whether numeric or alphabetic); let the
last come first.
@item --size-sort
Sort symbols by size. The size is computed as the difference between
the value of the symbol and the value of the symbol with the next higher
-value. If the @code{bsd} output format is used the size of the symbol
-is printed, rather than the value, and @samp{-S} must be used in order
+value. If the @code{bsd} output format is used the size of the symbol
+is printed, rather than the value, and @samp{-S} must be used in order
both size and value to be printed.
@item --special-syms
@xref{Target Selection}, for more information.
@item -u
-@itemx --undefined-only
+@itemx --undefined-only
@cindex external symbols
@cindex undefined symbols
Display only undefined symbols (those external to each object file).
[@option{--add-section} @var{sectionname}=@var{filename}]
[@option{--rename-section} @var{oldname}=@var{newname}[,@var{flags}]]
[@option{--change-leading-char}] [@option{--remove-leading-char}]
+ [@option{--reverse-bytes=}@var{num}]
[@option{--srec-len=}@var{ival}] [@option{--srec-forceS3}]
[@option{--redefine-sym} @var{old}=@var{new}]
[@option{--redefine-syms=}@var{filename}]
[@option{--pure}]
[@option{--impure}]
[@option{-v}|@option{--verbose}]
- [@option{-V}|@option{--version}]
+ [@option{-V}|@option{--version}]
[@option{--help}] [@option{--info}]
@var{infile} [@var{outfile}]
@c man end
files. If the input format has an endianness (some formats do not),
@command{objcopy} can only copy the inputs into file formats that have the
same endianness or which have no endianness (e.g., @samp{srec}).
+(However, see the @option{--reverse-bytes} option.)
@c man end
symbols that are created by the conversion process. These symbols are
called _binary_@var{objfile}_start, _binary_@var{objfile}_end and
_binary_@var{objfile}_size. e.g. you can transform a picture file into
-an object file and then access it in your code using these symbols.
+an object file and then access it in your code using these symbols.
@item -j @var{sectionname}
@itemx --only-section=@var{sectionname}
section addresses to be changed arbitrarily. Note that this does not
relocate the sections; if the program expects sections to be loaded at a
certain address, and this option is used to change the sections such
-that they are loaded at a different address, the program may fail.
+that they are loaded at a different address, the program may fail.
@item --change-section-address @var{section}@{=,+,-@}@var{val}
@itemx --adjust-section-vma @var{section}@{=,+,-@}@var{val}
@var{val}. Otherwise, @var{val} is added to or subtracted from the
section address. See the comments under @option{--change-addresses},
above. If @var{section} does not exist in the input file, a warning
-will be issued, unless @option{--no-change-warnings} is used.
+will be issued, unless @option{--no-change-warnings} is used.
@item --change-section-vma @var{section}@{=,+,-@}@var{val}
@cindex changing section VMA
from the section address. See the comments under
@option{--change-addresses}, above. If @var{section} does not exist in
the input file, a warning will be issued, unless
-@option{--no-change-warnings} is used.
+@option{--no-change-warnings} is used.
@item --change-warnings
@itemx --adjust-warnings
If @option{--change-section-address} or @option{--change-section-lma} or
@option{--change-section-vma} is used, and the named section does not
-exist, issue a warning. This is the default.
+exist, issue a warning. This is the default.
@item --no-change-warnings
@itemx --no-adjust-warnings
Do not issue a warning if @option{--change-section-address} or
@option{--adjust-section-lma} or @option{--adjust-section-vma} is used, even
-if the named section does not exist.
+if the named section does not exist.
@item --set-section-flags @var{section}=@var{flags}
Set the flags for the named section. The @var{flags} argument is a
when appropriate, regardless of the object file format of the output
file.
+@item --reverse-bytes=@var{num}
+Reverse the bytes in a section with output contents. A section length must
+be evenly divisible by the value given in order for the swap to be able to
+take place. Reversing takes place before the interleaving is performed.
+
+This option is used typically in generating ROM images for problematic
+target systems. For example, on some target boards, the 32-bit words
+fetched from 8-bit ROMs are re-assembled in little-endian byte order
+regardless of the CPU byte order. Depending on the programming model, the
+endianness of the ROM may need to be modified.
+
+Consider a simple file with a section containing the following eight
+bytes: @code{12345678}.
+
+Using @samp{--reverse-bytes=2} for the above example, the bytes in the
+output file would be ordered @code{21436587}.
+
+Using @samp{--reverse-bytes=4} for the above example, the bytes in the
+output file would be ordered @code{43218765}.
+
+By using @samp{--reverse-bytes=2} for the above example, followed by
+@samp{--reverse-bytes=4} on the output file, the bytes in the second
+output file would be ordered @code{34127856}.
+
@item --srec-len=@var{ival}
Meaningful only for srec output. Set the maximum length of the Srecords
being produced to @var{ival}. This length covers both address, data and
crc fields.
@item --srec-forceS3
-Meaningful only for srec output. Avoid generation of S1/S2 records,
+Meaningful only for srec output. Avoid generation of S1/S2 records,
creating S3-only record format.
@item --redefine-sym @var{old}=@var{new}
@item --alt-machine-code=@var{index}
If the output architecture has alternate machine codes, use the
@var{index}th code instead of the default one. This is useful in case
-a machine is assigned an official code and the tool-chain adopts the
+a machine is assigned an official code and the tool-chain adopts the
new code, but other applications still depend on the original code
being used. For ELF based architectures if the @var{index}
alternative does not exist then the value is treated as an absolute
@item --only-keep-debug
Strip a file, removing contents of any sections that would not be
stripped by @option{--strip-debug} and leaving the debugging sections
-intact.
+intact. In ELF files, this preserves all note sections in the output.
The intention is that this option will be used in conjunction with
@option{--add-gnu-debuglink} to create a two part executable. One a
@item sets the size of every section to zero; and
@item sets the file's start address to zero.
@end itemize
-
+
This option is used to build a @file{.sym} file for a VxWorks kernel.
It can also be a useful way of reducing the size of a @option{--just-symbols}
linker input file.
Decode (@dfn{demangle}) low-level symbol names into user-level names.
Besides removing any initial underscore prepended by the system, this
makes C++ function names readable. Different compilers have different
-mangling styles. The optional demangling style argument can be used to
-choose an appropriate demangling style for your compiler. @xref{c++filt},
+mangling styles. The optional demangling style argument can be used to
+choose an appropriate demangling style for your compiler. @xref{c++filt},
for more information on demangling.
@item -g
For PPC, @option{booke}, @option{booke32} and @option{booke64} select
disassembly of BookE instructions. @option{32} and @option{64} select
-PowerPC and PowerPC64 disassembly, respectively. @option{e300} selects
-disassembly for the e300 family. @option{440} selects disassembly for
-the powerPC 440.
+PowerPC and PowerPC64 disassembly, respectively. @option{e300}
+selects disassembly for the e300 family. @option{440} selects
+disassembly for the PowerPC 440. @option{ppcps} selects disassembly
+for the paired single instructions of the PPC750CL.
For MIPS, this option controls the printing of instruction mnemonic
names and register names in disassembled instructions. Multiple
@itemx --syms
@cindex symbol table entries, printing
Print the symbol table entries of the file.
-This is similar to the information provided by the @samp{nm} program.
+This is similar to the information provided by the @samp{nm} program,
+although the display format is different. The format of the output
+depends upon the format of the file being dumped, but there are two main
+types. One looks like this:
+
+@smallexample
+[ 4](sec 3)(fl 0x00)(ty 0)(scl 3) (nx 1) 0x00000000 .bss
+[ 6](sec 1)(fl 0x00)(ty 0)(scl 2) (nx 0) 0x00000000 fred
+@end smallexample
+
+where the number inside the square brackets is the number of the entry
+in the symbol table, the @var{sec} number is the section number, the
+@var{fl} value are the symbol's flag bits, the @var{ty} number is the
+symbol's type, the @var{scl} number is the symbol's storage class and
+the @var{nx} value is the number of auxilary entries associated with
+the symbol. The last two fields are the symbol's value and its name.
+
+The other common output format, usually seen with ELF based files,
+looks like this:
+
+@smallexample
+00000000 l d .bss 00000000 .bss
+00000000 g .text 00000000 fred
+@end smallexample
+
+Here the first number is the symbol's value (sometimes refered to as
+its address). The next field is actually a set of characters and
+spaces indicating the flag bits that are set on the symbol. These
+characters are described below. Next is the section with which the
+symbol is associated or @emph{*ABS*} if the section is absolute (ie
+not connected with any section), or @emph{*UND*} if the section is
+referenced in the file being dumped, but not defined there.
+
+After the section name comes another field, a number, which for common
+symbols is the alignment and for other symbol is the size. Finally
+the symbol's name is displayed.
+
+The flag characters are divided into 7 groups as follows:
+@table @code
+@item l
+@itemx g
+@itemx !
+The symbol is local (l), global (g), neither (a space) or both (!). A
+symbol can be neither local or global for a variety of reasons, eg
+because it is used for debugging, but it is probably an indication of
+a bug if it is ever both local and global.
+
+@item w
+The symbol is weak (w) or strong (a space).
+
+@item C
+The symbol denotes a constructor (C) or an ordinary symbol (a space).
+
+@item W
+The symbol is a warning (W) or a normal symbol (a space). A warning
+symbol's name is a message to be displayed if the symbol following the
+warning symbol is ever referenced.
+
+@item I
+The symbol is an indirect reference to another symbol (I) or a normal
+symbol (a space).
+
+@item d
+@itemx D
+The symbol is a debugging symbol (d) or a dynamic symbol (D) or a
+normal symbol (a space).
+
+@item F
+@item f
+@item O
+The symbol is the name of a function (F) or a file (f) or an object
+(O) or just a normal symbol (a space).
+@end table
@item -T
@itemx --dynamic-syms
@command{ranlib} generates an index to the contents of an archive and
stores it in the archive. The index lists each symbol defined by a
-member of an archive that is a relocatable object file.
+member of an archive that is a relocatable object file.
You may use @samp{nm -s} or @samp{nm --print-armap} to list this index.
size [@option{-A}|@option{-B}|@option{--format=}@var{compatibility}]
[@option{--help}]
[@option{-d}|@option{-o}|@option{-x}|@option{--radix=}@var{number}]
+ [@option{--common}]
[@option{-t}|@option{--totals}]
- [@option{--target=}@var{bfdname}] [@option{-V}|@option{--version}]
+ [@option{--target=}@var{bfdname}] [@option{-V}|@option{--version}]
[@var{objfile}@dots{}]
@c man end
@end smallexample
@command{size} resembles output from System V @command{size} (using @option{-A},
or @option{--format=sysv}), or Berkeley @command{size} (using @option{-B}, or
@option{--format=berkeley}). The default is the one-line format similar to
-Berkeley's.
+Berkeley's.
@c Bonus for doc-source readers: you can also say --format=strange (or
@c anything else that starts with 's') for sysv, and --format=boring (or
@c anything else that starts with 'b') for Berkeley.
Here is an example of the Berkeley (default) format of output from
-@command{size}:
+@command{size}:
@smallexample
$ size --format=Berkeley ranlib size
text data bss dec hex filename
$ size --format=SysV ranlib size
ranlib :
section size addr
-.text 294880 8192
-.data 81920 303104
-.bss 11592 385024
-Total 388392
+.text 294880 8192
+.data 81920 303104
+.bss 11592 385024
+Total 388392
size :
section size addr
-.text 294880 8192
-.data 81920 303104
-.bss 11888 385024
-Total 388688
+.text 294880 8192
+.data 81920 303104
+.bss 11888 385024
+Total 388688
@end smallexample
@item --help
radices; decimal and hexadecimal for @option{-d} or @option{-x} output, or
octal and hexadecimal if you're using @option{-o}.
+@item --common
+Print total size of common symbols in each file. When using Berkeley
+format these are included in the bss size.
+
@item -t
@itemx --totals
Show totals of all objects listed (Berkeley format listing mode only).
which would otherwise get stripped.
@item --only-keep-debug
-Strip a file, removing any sections that would be stripped by
-@option{--strip-debug} and leaving the debugging sections.
+Strip a file, removing contents of any sections that would not be
+stripped by @option{--strip-debug} and leaving the debugging sections
+intact. In ELF files, this preserves all note sections in the output.
The intention is that this option will be used in conjunction with
@option{--add-gnu-debuglink} to create a two part executable. One a
encode them into a low-level assembler name which uniquely identifies
each different version. This process is known as @dfn{mangling}. The
@command{c++filt}
-@footnote{MS-DOS does not allow @kbd{+} characters in file names, so on
+@footnote{MS-DOS does not allow @kbd{+} characters in file names, so on
MS-DOS this program is named @command{CXXFILT}.}
program does the inverse mapping: it decodes (@dfn{demangles}) low-level
names into user-level names so that they can be read.
@emph{Warning:} @command{c++filt} is a new utility, and the details of its
user interface are subject to change in future releases. In particular,
a command-line option may be required in the future to decode a name
-passed as an argument on the command line; in other words,
+passed as an argument on the command line; in other words,
@example
c++filt @var{symbol}
Decode (@dfn{demangle}) low-level symbol names into user-level names.
Besides removing any initial underscore prepended by the system, this
makes C++ function names readable. Different compilers have different
-mangling styles. The optional demangling style argument can be used to
-choose an appropriate demangling style for your compiler. @xref{c++filt},
+mangling styles. The optional demangling style argument can be used to
+choose an appropriate demangling style for your compiler. @xref{c++filt},
for more information on demangling.
@item -e @var{filename}
@c man end
@end ignore
+@node windmc
+@chapter windmc
+
+@command{windmc} may be used to generator Windows message resources.
+
+@quotation
+@emph{Warning:} @command{windmc} is not always built as part of the binary
+utilities, since it is only useful for Windows targets.
+@end quotation
+
+@c man title windmc generates Windows message resources.
+
+@smallexample
+@c man begin SYNOPSIS windres
+windmc [options] input-file
+@c man end
+@end smallexample
+
+@c man begin DESCRIPTION windmc
+
+@command{windmc} reads message definitions from an input file (.mc) and
+translate them into a set of output files. The output files may be of
+four kinds:
+
+@table @code
+@item h
+A C header file containing the message definitions.
+
+@item rc
+A resource file compilable by the @command{windres} tool.
+
+@item bin
+One or more binary files containing the resource data for a specific
+message language.
+
+@item dbg
+A C include file that maps message id's to their symbolic name.
+@end table
+
+The exact description of these different formats is available in
+documentation from Microsoft.
+
+When @command{windmc} converts from the @code{mc} format to the @code{bin}
+format, @code{rc}, @code{h}, and optional @code{dbg} it is acting like the
+Windows Message Compiler.
+
+@c man end
+
+@c man begin OPTIONS windmc
+
+@table @env
+@item -a
+@itemx --ascii_in
+Specifies that the input file specified is ANSI. This is the default
+behaviour.
+
+@item -A
+@itemx --ascii_out
+Specifies that messages in the output @code{bin} files should be in ANSI
+format.
+
+@item -b
+@itemx --binprefix
+Specifies that @code{bin} filenames should have to be prefixed by the
+basename of the source file.
+
+@item -c
+@itemx --customflag
+Sets the customer bit in all message id's.
+
+@item -C @var{codepage}
+@itemx --codepage_in @var{codepage}
+Sets the default codepage to be used to convert input file to UTF16. The
+default is ocdepage 1252.
+
+@item -d
+@itemx --decimal_values
+Outputs the constants in the header file in decimal. Default is using
+hexadecimal output.
+
+@item -e @var{ext}
+@itemx --extension @var{ext}
+The extension for the header file. The default is .h extension.
+
+@item -F @var{target}
+@itemx --target @var{target}
+Specify the BFD format to use for a bin file as output. This
+is a BFD target name; you can use the @option{--help} option to see a list
+of supported targets. Normally @command{windmc} will use the default
+format, which is the first one listed by the @option{--help} option.
+@ifclear man
+@ref{Target Selection}.
+@end ifclear
+
+@item -h @var{path}
+@itemx --headerdir @var{path}
+The target directory of the generated header file. The default is the
+current directory.
+
+@item -H
+@itemx --help
+Displays a list of command line options and then exits.
+
+@item -m @var{characters}
+@itemx --maxlength @var{characters}
+Instructs @command{windmc} to generate a warning if the length
+of any message exceeds the number specified.
+
+@item -n
+@itemx --nullterminate
+Terminate message text in @code{bin} files by zero. By default they are
+terminated by CR/LF.
+
+@item -o
+@itemx --hresult_use
+Not yet implemented. Instructs @code{windmc} to generate an OLE2 header
+file, using HRESULT definitions. Status codes are used if the flag is not
+specified.
+
+@item -O @var{codepage}
+@itemx --codepage_out @var{codepage}
+Sets the default codepage to be used to output text files. The default
+is ocdepage 1252.
+
+@item -r @var{path}
+@itemx --rcdir @var{path}
+The target directory for the generated @code{rc} script and the generated
+@code{bin} files that the resource compiler script includes. The default
+is the current directory.
+
+@item -u
+@itemx --unicode_in
+Specifies that the input file is UTF16.
+
+@item -U
+@itemx --unicode_out
+Specifies that messages in the output @code{bin} file should be in UTF16
+format. This is the default behaviour.
+
+@item -v
+@item --verbose
+Enable verbose mode.
+
+@item -V
+@item --version
+Prints the version number for @command{windmc}.
+
+@item -x @var{path}
+@itemx --xdgb @var{path}
+The path of the @code{dbg} C include file that maps message id's to the
+symbolic name. No such file is generated without specifying the switch.
+@end table
+
+@c man end
+
+@ignore
+@c man begin SEEALSO windmc
+the Info entries for @file{binutils}.
+@c man end
+@end ignore
+
@node windres
@chapter windres
@command{windres} will pass this to the preprocessor as an @option{-I}
option. @command{windres} will also search this directory when looking for
files named in the @code{rc} file. If the argument passed to this command
-matches any of the supported @var{formats} (as described in the @option{-J}
+matches any of the supported @var{formats} (as described in the @option{-J}
option), it will issue a deprecation warning, and behave just like the
@option{-J} option. New programs should not use this behaviour. If a
directory happens to match a @var{format}, simple prefix it with @samp{./}
Enable verbose mode. This tells you what the preprocessor is if you
didn't specify one.
+@item -c @var{val}
+@item --codepage @var{val}
+Specify the default codepage to use when reading an @code{rc} file.
+@var{val} should be a hexadecimal prefixed by @samp{0x} or decimal
+codepage code. The valid range is from zero up to 0xffff, but the
+validity of the codepage is host and configuration dependent.
+
@item -l @var{val}
@item --language @var{val}
Specify the default language to use when reading an @code{rc} file.
@item --use-temp-file
Use a temporary file to instead of using popen to read the output of
-the preprocessor. Use this option if the popen implementation is buggy
-on the host (eg., certain non-English language versions of Windows 95 and
+the preprocessor. Use this option if the popen implementation is buggy
+on the host (eg., certain non-English language versions of Windows 95 and
Windows 98 are known to have buggy popen where the output will instead
go the console).
[@option{-b}|@option{--base-file} @var{base-file-name}]
[@option{-e}|@option{--output-exp} @var{exports-file-name}]
[@option{-z}|@option{--output-def} @var{def-file-name}]
- [@option{-l}|@option{--output-lib} @var{library-file-name}]
+ [@option{-l}|@option{--output-lib} @var{library-file-name}]
[@option{--export-all-symbols}] [@option{--no-export-all-symbols}]
[@option{--exclude-symbols} @var{list}]
[@option{--no-default-excludes}]
[@option{-p}|@option{--ext-prefix-alias} @var{prefix}]
[@option{-x}|@option{--no-idata4}] [@option{-c}|@option{--no-idata5}] [@option{-i}|@option{--interwork}]
[@option{-n}|@option{--nodelete}] [@option{-t}|@option{--temp-prefix} @var{prefix}]
- [@option{-v}|@option{--verbose}]
+ [@option{-v}|@option{--verbose}]
[@option{-h}|@option{--help}] [@option{-V}|@option{--version}]
[object-file @dots{}]
@c man end
line. It then processes these inputs and if the @option{-e} option has
been specified it creates a exports file. If the @option{-l} option
has been specified it creates a library file and if the @option{-z} option
-has been specified it creates a def file. Any or all of the @option{-e},
-@option{-l} and @option{-z} options can be present in one invocation of
+has been specified it creates a def file. Any or all of the @option{-e},
+@option{-l} and @option{-z} options can be present in one invocation of
dlltool.
When creating a DLL, along with the source for the DLL, it is necessary
asm() operator:
@smallexample
- asm (".section .drectve");
+ asm (".section .drectve");
asm (".ascii \"-export:my_func\"");
int my_func (void) @{ @dots{} @}
is linked with the object files that make up the body of the DLL and it
handles the interface between the DLL and the outside world. This is a
binary file and it can be created by giving the @option{-e} option to
-@command{dlltool} when it is creating or reading in a @file{.def} file.
+@command{dlltool} when it is creating or reading in a @file{.def} file.
The third file needed for DLL creation is the library file that programs
will link with in order to access the functions in the DLL. This file
Specifies that when @command{dlltool} is creating the exports file it
should add a section which allows the exported functions to be
referenced without using the import library. Whatever the hell that
-means!
+means!
@item -U
@itemx --add-underscore
Specifies that when @command{dlltool} is creating the exports file it
-should prepend an underscore to the names of @emph{all} exported symbols.
+should prepend an underscore to the names of @emph{all} exported symbols.
@item --add-stdcall-underscore
Specifies that when @command{dlltool} is creating the exports file it
@itemx --temp-prefix @var{prefix}
Makes @command{dlltool} use @var{prefix} when constructing the names of
temporary assembler and object files. By default, the temp file prefix
-is generated from the pid.
+is generated from the pid.
@item -v
@itemx --verbose
@smallexample
@c man begin SYNOPSIS readelf
-readelf [@option{-a}|@option{--all}]
+readelf [@option{-a}|@option{--all}]
[@option{-h}|@option{--file-header}]
[@option{-l}|@option{--program-headers}|@option{--segments}]
[@option{-S}|@option{--section-headers}|@option{--sections}]
[@option{-A}|@option{--arch-specific}]
[@option{-D}|@option{--use-dynamic}]
[@option{-x} <number or name>|@option{--hex-dump=}<number or name>]
+ [@option{-p} <number or name>|@option{--string-dump=}<number or name>]
[@option{-w[liaprmfFsoR]}|
@option{--debug-dump}[=line,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges]]
[@option{-I}|@option{-histogram}]
The long and short forms of options, shown here as alternatives, are
equivalent. At least one option besides @samp{-v} or @samp{-H} must be
-given.
+given.
@table @env
@item -a
Equivalent to specifying @option{--file-header},
@option{--program-headers}, @option{--sections}, @option{--symbols},
@option{--relocs}, @option{--dynamic}, @option{--notes} and
-@option{--version-info}.
+@option{--version-info}.
@item -h
@itemx --file-header
A number identifies a particular section by index in the section table;
any other string identifies all sections with that name in the object file.
+@item -p <number or name>
+@itemx --string-dump=<number or name>
+Displays the contents of the indicated section as printable strings.
+A number identifies a particular section by index in the section table;
+any other string identifies all sections with that name in the object file.
+
@item -w[liaprmfFsoR]
@itemx --debug-dump[=line,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges]
Displays the contents of the debug sections in the file, if any are
with the same type as the target system).
@menu
-* Target Selection::
-* Architecture Selection::
+* Target Selection::
+* Architecture Selection::
@end menu
@node Target Selection
@printindex cp
-@contents
@bye