-.\" Copyright (c) 1991 Free Software Foundation
+.\" Copyright (c) 1991, 93, 94, 95, 96, 1997 Free Software Foundation
.\" See section COPYING for conditions for redistribution
.TH objcopy 1 "October 1994" "cygnus support" "GNU Development Tools"
.de BP
.na
.TP
.B objcopy
-.RB "[\|" \-F\ \fIbfdname\fB\ |\ \-\-target=\fIbfdname\fR "\|]"
-.RB "[\|" \-I\ \fIbfdname\fB\ |\ \-\-input\-target=\fIbfdname\fR "\|]"
-.RB "[\|" \-O\ \fIbfdname\fB\ |\ \-\-output\-target=\fIbfdname\fR "\|]"
-.RB "[\|" \-R\ \fIsectionname\fB\ |\ \-\-remove\-section=\fIsectionname\fR "\|]"
-.RB "[\|" \-S\ |\ \-\-strip\-all\fR "\|]"
-.RB "[\|" \-g\ |\ \-\-strip\-debug\fR "\|]"
-.RB "[\|" \-x\ |\ \-\-discard\-all\fR "\|]"
-.RB "[\|" \-X\ |\ \-\-discard\-locals\fR "\|]"
-.RB "[\|" \-b\ \fIbyte\fP |\ \-\-byte=\fIbyte\fP "\|]"
-.RB "[\|" \-i\ \fIinterleave\fP |\ \-\-interleave=\fIinterleave\fP "\|]"
-.RB "[\|" \-\-set\-start=\fIval\fP "\|]"
-.RB "[\|" \-\-adjust\-start=\fIincr\fP "\|]"
-.RB "[\|" \-\-adjust\-vma=\fIincr\fP "\|]"
-.RB "[\|" \-\-adjust\-section\-vma=\fIsection{=,+,-}val\fP "\|]"
-.RB "[\|" \-\-adjust\-warnings "\|]"
-.RB "[\|" \-\-no\-adjust\-warnings "\|]"
+.RB "[\|" \-F\ \fIbfdname\fR\ |\ \fB\-\-target=\fIbfdname\fR "\|]"
+.RB "[\|" \-I\ \fIbfdname\fR\ |\ \fB\-\-input\-target=\fIbfdname\fR "\|]"
+.RB "[\|" \-O\ \fIbfdname\fR\ |\ \fB\-\-output\-target=\fIbfdname\fR "\|]"
+.RB "[\|" \-R\ \fIsectionname\fR\ |\ \fB\-\-remove\-section=\fIsectionname\fR "\|]"
+.RB "[\|" \-S\fR\ |\ \fB\-\-strip\-all\fR "\|]"
+.RB "[\|" \-g\fR\ |\ \fB\-\-strip\-debug\fR "\|]"
+.RB "[\|" \-\-strip\-unneeded\fR "\|]"
+.RB "[\|" \-K\ \fIsymbolname\fR\ |\ \fB\-\-keep\-symbol=\fIsymbolname\fR "\|]"
+.RB "[\|" \-N\ \fIsymbolname\fR\ |\ \fB\-\-strip\-symbol=\fIsymbolname\fR "\|]"
+.RB "[\|" \-L\ \fIsymbolname\fR\ |\ \fB\-\-localize\-symbol=\fIsymbolname\fR "\|]"
+.RB "[\|" \-W\ \fIsymbolname\fR\ |\ \fB\-\-weaken\-symbol=\fIsymbolname\fR "\|]"
+.RB "[\|" \-x\fR\ |\ \fB\-\-discard\-all\fR "\|]"
+.RB "[\|" \-X\fR\ |\ \fB\-\-discard\-locals\fR "\|]"
+.RB "[\|" \-b\ \fIbyte\fR\ |\ \fB\-\-byte=\fIbyte\fR "\|]"
+.RB "[\|" \-i\ \fIinterleave\fR\ |\ \fB\-\-interleave=\fIinterleave\fR "\|]"
+.RB "[\|" \-p\fR\ |\ \fB\-\-preserve\-dates\fR "\|]"
+.RB "[\|" \-\-debugging "\|]"
+.RB "[\|" \-\-gap\-fill=\fIval\fR "\|]"
+.RB "[\|" \-\-pad\-to=\fIaddress\fR "\|]"
+.RB "[\|" \-\-set\-start=\fIval\fR "\|]"
+.RB "[\|" \-\-adjust\-start=\fIincr\fR "\|]"
+.RB "[\|" \-\-adjust\-vma=\fIincr\fR "\|]"
+.RB "[\|" \-\-adjust\-section\-vma=\fIsection{=,+,-}val\fR "\|]"
+.RB "[\|" \-\-adjust\-warnings\fR "\|]"
+.RB "[\|" \-\-no\-adjust\-warnings\fR "\|]"
+.RB "[\|" \-\-set\-section\-flags=\fIsection=flags\fR "\|]"
+.RB "[\|" \-\-add\-section=\fIsectionname=filename\fR "\|]"
+.RB "[\|" \-\-change\-leading\-char\fR "\|]"
+.RB "[\|" \-\-remove\-leading\-char\fR "\|]"
+.RB "[\|" \-\-weaken\fR "\|]"
.RB "[\|" \-v\ |\ \-\-verbose\fR "\|]"
.RB "[\|" \-V\ |\ \-\-version\fR "\|]"
.RB "[\|" \-\-help\fR "\|]"
.B objcopy
generates a raw binary file, it will essentially produce a memory dump
of the contents of the input object file. All symbols and relocation
-information will be discarded. By default, the memory dump will start
-at virtual address zero; the
-.B --set-start
-option may be used to specify a different starting point.
+information will be discarded. The memory dump will start at the
+virtual address of the lowest section copied into the output file.
.PP
When generating an S-record or a raw binary file, it may be helpful to
use
.B \-g\fR, \fB\-\-strip\-debug
Do not copy debugging symbols from the source file.
.TP
+.B \-\-strip\-unneeded
+Strip all symbols that are not needed for relocation processing.
+.TP
+.B \-K \fIsymbolname\fR, \fB\-\-keep\-symbol=\fIsymbolname
+Copy only symbol \fIsymbolname\fP from the source file. This option
+may be given more than once.
+.TP
+.B \-N \fIsymbolname\fR, \fB\-\-strip\-symbol=\fIsymbolname
+Do not copy symbol \fIsymbolname\fP from the source file. This option
+may be given more than once.
+.TP
+.B \-L \fIsymbolname\fR, \fB\-\-localize\-symbol=\fIsymbolname
+Make symbol \fIsymbolname\fP local to the file, so that it is not
+visible externally. This option may be given more than once.
+.TP
+.B \-W \fIsymbolname\fR, \fB\-\-weaken\-symbol=\fIsymbolname
+Make symbol \fIsymbolname\fP weak. This option may be given more than once.
+.TP
.B \-x\fR, \fB \-\-discard\-all
Do not copy non-global symbols from the source file.
.TP
selected by the \fB\-b\fP or \fB\-\-byte\fP option. The default is 4.
The interleave is ignored if neither \fB\-b\fP nor \fB\-\-byte\fP is given.
.TP
+.B \-p\fR, \fB\-\-preserve\-dates
+Set the access and modification dates of the output file to be the same
+as those of the input file.
+.TP
+.B \-\-debugging
+Convert debugging information, if possible. This is not the default
+because only certain debugging formats are supported, and the
+conversion process can be time consuming.
+.TP
+.B \-\-gap\-fill=\fIval
+Fill gaps between sections with \fIval\fP. This operation applies to
+the \fIload address\fP (LMA) of the sections. It is done by increasing
+the size of the section with the lower address, and filling in the extra
+space created with \fIval\fP.
+.TP
+.B \-\-pad\-to=\fIaddress
+Pad the output file up to the load address \fIaddress\fP. This is
+done by increasing the size of the last section. The extra space is
+filled in with the value specified by \fB\-\-gap\-fill\fP (default
+zero).
+.TP
.B \fB\-\-set\-start=\fIval
Set the start address of the new file to \fIval\fP. Not all object
-file formats support setting the start address. When using the
-\fBbinary\fP output file format, the start address sets the virtual
-address of the first byte in the binary output file.
+file formats support setting the start address.
.TP
.B \fB\-\-adjust\-start=\fIincr
Adjust the start address by adding \fIincr\fP. Not all object file
Do not issue a warning if \fB\-\-adjust\-section\-vma\fP is used, even
if the named section does not exist.
.TP
+.B \fB\-\-set\-section\-flags=\fIsection=flags
+Set the flags for the named section. The \fIflags\fP argument is a
+comma separated string of flag names. The recognized names are
+\fIalloc\fP, \fIload\fP, \fIreadonly\fP, \fIcode\fP, \fIdata\fP, and
+\fIrom\fP. Not all flags are meaningful for all object file
+formats.
+.TP
+.B \fB\-\-add\-section=\fIsectionname=filename
+Add a new section named \fIsectionname\fR while copying the file. The
+contents of the new section are taken from the file \fIfilename\fR.
+The size of the section will be the size of the file. This option
+only works on file formats which can support sections with arbitrary
+names.
+.TP
+.B \-\-change\-leading\-char
+Some object file formats use special characters at the start of
+symbols. The most common such character is underscore, which compilers
+often add before every symbol. This option tells
+.B objcopy
+to change the leading character of every symbol when it converts
+between object file formats. If the object file formats use the same
+leading character, this option has no effect. Otherwise, it will add
+a character, or remove a character, or change a character, as
+appropriate.
+.TP
+.B \-\-remove\-leading\-char
+If the first character of a global symbol is a special symbol leading
+character used by the object file format, remove the character. The
+most common symbol leading character is underscore. This option will
+remove a leading underscore from all global symbols. This can be
+useful if you want to link together objects of different file formats
+with different conventions for symbol names. This is different from
+@code{--change-leading-char} because it always changes the symbol name
+when appropriate, regardless of the object file format of the output
+.TP
+.B \-\-weaken
+Change all global symbols in the file to be weak.
+.TP
.B \-v\fR, \fB\-\-verbose
Verbose output: list all object files modified. In the case of
archives, "\fBobjcopy \-V\fR" lists all members of the archive.
\&, Roland H. Pesch (June 1993).
.SH COPYING
-Copyright (c) 1993,1994 Free Software Foundation, Inc.
+Copyright (c) 1993, 94, 95, 96, 1997 Free Software Foundation, Inc.
.PP
Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice