/* objcopy.c -- copy object file from input to output, optionally massaging it.
- Copyright (C) 1991-2018 Free Software Foundation, Inc.
+ Copyright (C) 1991-2019 Free Software Foundation, Inc.
This file is part of GNU Binutils.
#define SECTION_CONTEXT_ALTER_LMA (1 << 5) /* Increment or decrement the section's LMA address. */
#define SECTION_CONTEXT_SET_FLAGS (1 << 6) /* Set the section's flags. */
#define SECTION_CONTEXT_REMOVE_RELOCS (1 << 7) /* Remove relocations for this section. */
+#define SECTION_CONTEXT_SET_ALIGNMENT (1 << 8) /* Set alignment for section. */
bfd_vma vma_val; /* Amount to change by or set to. */
bfd_vma lma_val; /* Amount to change by or set to. */
flagword flags; /* What to set the section flags to. */
+ unsigned int alignment; /* Alignment of output section. */
};
static struct section_list *change_sections;
static struct addsym_node *add_sym_list = NULL, **add_sym_tail = &add_sym_list;
static int add_symbols = 0;
+static char *strip_specific_buffer = NULL;
+static char *strip_unneeded_buffer = NULL;
+static char *keep_specific_buffer = NULL;
+static char *localize_specific_buffer = NULL;
+static char *globalize_specific_buffer = NULL;
+static char *keepglobal_specific_buffer = NULL;
+static char *weaken_specific_buffer = NULL;
+
/* If this is TRUE, we weaken global symbols (set BSF_WEAK). */
static bfd_boolean weaken = FALSE;
OPTION_REMOVE_RELOCS,
OPTION_RENAME_SECTION,
OPTION_REVERSE_BYTES,
- OPTION_SECTION_ALIGNMENT,
+ OPTION_PE_SECTION_ALIGNMENT,
OPTION_SET_SECTION_FLAGS,
+ OPTION_SET_SECTION_ALIGNMENT,
OPTION_SET_START,
OPTION_SREC_FORCES3,
OPTION_SREC_LEN,
OPTION_STRIP_UNNEEDED_SYMBOLS,
OPTION_SUBSYSTEM,
OPTION_UPDATE_SECTION,
+ OPTION_VERILOG_DATA_WIDTH,
OPTION_WEAKEN,
OPTION_WEAKEN_SYMBOLS,
OPTION_WRITABLE_TEXT
{"remove-relocations", required_argument, 0, OPTION_REMOVE_RELOCS},
{"rename-section", required_argument, 0, OPTION_RENAME_SECTION},
{"reverse-bytes", required_argument, 0, OPTION_REVERSE_BYTES},
- {"section-alignment", required_argument, 0, OPTION_SECTION_ALIGNMENT},
+ {"section-alignment", required_argument, 0, OPTION_PE_SECTION_ALIGNMENT},
{"set-section-flags", required_argument, 0, OPTION_SET_SECTION_FLAGS},
+ {"set-section-alignment", required_argument, 0, OPTION_SET_SECTION_ALIGNMENT},
{"set-start", required_argument, 0, OPTION_SET_START},
{"srec-forceS3", no_argument, 0, OPTION_SREC_FORCES3},
{"srec-len", required_argument, 0, OPTION_SREC_LEN},
{"target", required_argument, 0, 'F'},
{"update-section", required_argument, 0, OPTION_UPDATE_SECTION},
{"verbose", no_argument, 0, 'v'},
+ {"verilog-data-width", required_argument, 0, OPTION_VERILOG_DATA_WIDTH},
{"version", no_argument, 0, 'V'},
{"weaken", no_argument, 0, OPTION_WEAKEN},
{"weaken-symbol", required_argument, 0, 'W'},
on by the --srec-forceS3 command line switch. */
extern bfd_boolean _bfd_srec_forceS3;
+/* Width of data in bytes for verilog output.
+ This variable is declared in bfd/verilog.c and can be modified by
+ the --verilog-data-width parameter. */
+extern unsigned int VerilogDataWidth;
+
/* Forward declarations. */
static void setup_section (bfd *, asection *, void *);
static void setup_bfd_headers (bfd *, bfd *);
Warn if a named section does not exist\n\
--set-section-flags <name>=<flags>\n\
Set section <name>'s properties to <flags>\n\
+ --set-section-alignment <name>=<align>\n\
+ Set section <name>'s alignment to 2^<align> bytes\n\
--add-section <name>=<file> Add section <name> found in <file> to output\n\
--update-section <name>=<file>\n\
Update contents of section <name> with\n\
--decompress-debug-sections Decompress DWARF debug sections using zlib\n\
--elf-stt-common=[yes|no] Generate ELF common symbols with STT_COMMON\n\
type\n\
+ --verilog-data-width <number> Specifies data width, in bytes, for verilog output\n\
-M --merge-notes Remove redundant entries in note sections\n\
--no-merge-notes Do not attempt to remove redundant notes (default)\n\
-v --verbose List all object files modified\n\
p->vma_val = 0;
p->lma_val = 0;
p->flags = 0;
+ p->alignment = 0;
p->next = change_sections;
change_sections = p;
#define IS_LINE_TERMINATOR(c) ((c) == '\n' || (c) == '\r' || (c) == '\0')
static void
-add_specific_symbols (const char *filename, htab_t htab)
+add_specific_symbols (const char *filename, htab_t htab, char **buffer_p)
{
off_t size;
FILE * f;
line = eol;
line_count ++;
}
+
+ /* Do not free the buffer. Parts of it will have been referenced
+ in the calls to add_specific_symbol. */
+ *buffer_p = buffer;
}
/* See whether a symbol should be stripped or kept
{
asymbol *sym = bfd_make_empty_symbol (obfd);
- bfd_asymbol_name (sym) = ptr->symdef;
+ bfd_set_asymbol_name (sym, ptr->symdef);
sym->value = ptr->symval;
sym->flags = ptr->flags;
if (ptr->section)
bfd_boolean rem_leading_char;
bfd_boolean add_leading_char;
- undefined = bfd_is_und_section (bfd_get_section (sym));
+ undefined = bfd_is_und_section (bfd_asymbol_section (sym));
if (add_sym_list)
{
if (new_name == name
&& (flags & BSF_SECTION_SYM) != 0)
new_name = (char *) find_section_rename (name, NULL);
- bfd_asymbol_name (sym) = new_name;
+ bfd_set_asymbol_name (sym, new_name);
name = new_name;
}
|| (remove_leading_char
&& ((flags & (BSF_GLOBAL | BSF_WEAK)) != 0
|| undefined
- || bfd_is_com_section (bfd_get_section (sym)))));
+ || bfd_is_com_section (bfd_asymbol_section (sym)))));
/* Check if we will add a new leading character. */
add_leading_char =
if (rem_leading_char && add_leading_char && !prefix_symbols_string)
{
name[0] = bfd_get_symbol_leading_char (obfd);
- bfd_asymbol_name (sym) = name;
+ bfd_set_asymbol_name (sym, name);
rem_leading_char = FALSE;
add_leading_char = FALSE;
}
/* Remove leading char. */
if (rem_leading_char)
- bfd_asymbol_name (sym) = ++name;
+ bfd_set_asymbol_name (sym, ++name);
/* Add new leading char and/or prefix. */
if (add_leading_char || prefix_symbols_string)
}
strcpy (ptr, name);
- bfd_asymbol_name (sym) = n;
+ bfd_set_asymbol_name (sym, n);
name = n;
}
keep = FALSE;
else if ((flags & BSF_KEEP) != 0 /* Used in relocation. */
|| ((flags & BSF_SECTION_SYM) != 0
- && ((*bfd_get_section (sym)->symbol_ptr_ptr)->flags
+ && ((*bfd_asymbol_section (sym)->symbol_ptr_ptr)->flags
& BSF_KEEP) != 0))
{
keep = TRUE;
}
else if (relocatable /* Relocatable file. */
&& ((flags & (BSF_GLOBAL | BSF_WEAK)) != 0
- || bfd_is_com_section (bfd_get_section (sym))))
+ || bfd_is_com_section (bfd_asymbol_section (sym))))
keep = TRUE;
else if (bfd_decode_symclass (sym) == 'I')
/* Global symbols in $idata sections need to be retained
else if ((flags & BSF_GLOBAL) != 0 /* Global symbol. */
|| (flags & BSF_WEAK) != 0
|| undefined
- || bfd_is_com_section (bfd_get_section (sym)))
+ || bfd_is_com_section (bfd_asymbol_section (sym)))
keep = strip_symbols != STRIP_UNNEEDED;
else if ((flags & BSF_DEBUGGING) != 0) /* Debugging symbol. */
keep = (strip_symbols != STRIP_DEBUG
&& strip_symbols != STRIP_UNNEEDED
&& ! convert_debugging);
- else if (bfd_coff_get_comdat_section (abfd, bfd_get_section (sym)))
+ else if (bfd_coff_get_comdat_section (abfd, bfd_asymbol_section (sym)))
/* COMDAT sections store special information in local
symbols, so we cannot risk stripping any of them. */
keep = TRUE;
|| is_specified_symbol (name, keep_specific_htab)))
keep = TRUE;
- if (keep && is_strip_section (abfd, bfd_get_section (sym)))
+ if (keep && is_strip_section (abfd, bfd_asymbol_section (sym)))
keep = FALSE;
if (keep)
fatal (_("%s:%d: premature end of file"), filename, lineno);
free (buf);
+ fclose (file);
}
/* Copy unknown object file IBFD onto OBFD.
unsigned long previous_open_end = 0;
long relsize;
-
relsize = bfd_get_reloc_upper_bound (abfd, sec);
if (relsize > 0)
{
}
/* Make a copy of the notes and convert to our internal format.
- Minimum size of a note is 12 bytes. */
+ Minimum size of a note is 12 bytes. Also locate the version
+ notes and check them. */
pnote = pnotes = (objcopy_internal_note *) xcalloc ((size / 12), sizeof (* pnote));
while (remain >= 12)
{
attribute_type_byte = version_1_seen ? 1 : 3;
val_start = attribute_type_byte + 1;
- /* The first note should be the first version note. */
- if (pnotes[0].note.namedata[attribute_type_byte] != GNU_BUILD_ATTRIBUTE_VERSION)
- {
- err = _("bad GNU build attribute notes: first note not version note");
- goto done;
- }
+ /* We used to require that the first note be a version note,
+ but this is no longer enforced. Due to the problems with
+ linking sections with the same name (eg .gnu.build.note.hot)
+ we cannot guarantee that the first note will be a version note. */
/* Now merge the notes. The rules are:
1. Preserve the ordering of the notes.
3. Eliminate any NT_GNU_BUILD_ATTRIBUTE_OPEN notes that have the same
full name field as the immediately preceeding note with the same type
of name and whose address ranges coincide.
- IE - it there are gaps in the coverage of the notes, then these gaps
+ IE - if there are gaps in the coverage of the notes, then these gaps
must be preserved.
4. Combine the numeric value of any NT_GNU_BUILD_ATTRIBUTE_OPEN notes
of type GNU_BUILD_ATTRIBUTE_STACK_SIZE.
its description field is empty then the nearest preceeding OPEN note
with a non-empty description field must also be preserved *OR* the
description field of the note must be changed to contain the starting
- address to which it refers. */
- for (pnote = pnotes + 1; pnote < pnotes_end; pnote ++)
+ address to which it refers.
+ 6. Notes with the same start and end address can be deleted.
+ 7. FIXME: Elminate duplicate version notes - even function specific ones ? */
+ for (pnote = pnotes; pnote < pnotes_end; pnote ++)
{
int note_type;
objcopy_internal_note * back;
objcopy_internal_note * prev_open_with_range = NULL;
+ /* Rule 6 - delete 0-range notes. */
+ if (pnote->start == pnote->end)
+ {
+ duplicate_found = TRUE;
+ pnote->note.type = 0;
+ continue;
+ }
+
/* Rule 2 - preserve function notes. */
if (! is_open_note (pnote))
- continue;
+ {
+ int iter;
+
+ /* Check to see if there is an identical previous function note.
+ This can happen with overlays for example. */
+ for (iter = 0, back = pnote -1; back >= pnotes; back --)
+ {
+ if (back->start == pnote->start
+ && back->end == pnote->end
+ && back->note.namesz == pnote->note.namesz
+ && memcmp (back->note.namedata, pnote->note.namedata, pnote->note.namesz) == 0)
+ {
+ duplicate_found = TRUE;
+ pnote->note.type = 0;
+ break;
+ }
+
+ /* Don't scan too far back however. */
+ if (iter ++ > 16)
+ break;
+ }
+ continue;
+ }
note_type = pnote->note.namedata[attribute_type_byte];
pdump->filename,
strerror (errno));
free (contents);
+ fclose (f);
return FALSE;
}
}
if (convert_debugging && dhandle != NULL)
{
- if (! write_debugging_info (obfd, dhandle, &symcount, &osympp))
+ bfd_boolean res;
+
+ res = write_debugging_info (obfd, dhandle, &symcount, &osympp);
+
+ free (dhandle);
+ dhandle = NULL; /* Paranoia... */
+
+ if (! res)
{
status = 1;
return FALSE;
off, now))
{
bfd_nonfatal_message (NULL, obfd, osections[i], NULL);
+ free (buf);
return FALSE;
}
}
}
}
+
+ free (buf);
+ free (gaps);
+ gaps = NULL;
}
/* Allow the BFD backend to copy any private data it understands
char *dir;
const char *filename;
+ /* PR 24281: It is not clear what should happen when copying a thin archive.
+ One part is straight forward - if the output archive is in a different
+ directory from the input archive then any relative paths in the library
+ should be adjusted to the new location. But if any transformation
+ options are active (eg strip, rename, add, etc) then the implication is
+ that these should be applied to the files pointed to by the archive.
+ But since objcopy is not destructive, this means that new files must be
+ created, and there is no guidance for the names of the new files. (Plus
+ this conflicts with one of the goals of thin libraries - only taking up
+ a minimal amount of space in the file system).
+
+ So for now we fail if an attempt is made to copy such libraries. */
+ if (ibfd->is_thin_archive)
+ {
+ status = 1;
+ bfd_set_error (bfd_error_invalid_operation);
+ bfd_nonfatal_message (NULL, ibfd, NULL,
+ _("sorry: copying thin archives is not currently supported"));
+ return;
+ }
+
/* Make a temp directory to hold the contents. */
dir = make_tempdir (bfd_get_filename (obfd));
if (dir == NULL)
/* If the file already exists, make another temp dir. */
if (stat (output_name, &buf) >= 0)
{
- output_name = make_tempdir (output_name);
- if (output_name == NULL)
+ char * tmpdir = make_tempdir (output_name);
+
+ free (output_name);
+ if (tmpdir == NULL)
{
non_fatal (_("cannot create tempdir for archive copying (error: %s)"),
strerror (errno));
}
l = (struct name_list *) xmalloc (sizeof (struct name_list));
- l->name = output_name;
+ l->name = tmpdir;
l->next = list;
l->obfd = NULL;
list = l;
- output_name = concat (output_name, "/",
+ output_name = concat (tmpdir, "/",
bfd_get_filename (this_element), (char *) 0);
}
cleanup_and_exit:
/* Delete all the files that we opened. */
- for (l = list; l != NULL; l = l->next)
- {
- if (l->obfd == NULL)
- rmdir (l->name);
- else
- {
- bfd_close (l->obfd);
- unlink (l->name);
- }
- }
+ {
+ struct name_list * next;
+
+ for (l = list; l != NULL; l = next)
+ {
+ if (l->obfd == NULL)
+ rmdir (l->name);
+ else
+ {
+ bfd_close (l->obfd);
+ unlink (l->name);
+ }
+ next = l->next;
+ free (l);
+ }
+ }
rmdir (dir);
}
const char * name;
char *prefix = NULL;
bfd_boolean make_nobits;
+ unsigned int alignment;
if (is_strip_section (ibfd, isection))
return;
osection->lma = lma;
+ p = find_section_list (bfd_section_name (ibfd, isection), FALSE,
+ SECTION_CONTEXT_SET_ALIGNMENT);
+ if (p != NULL)
+ alignment = p->alignment;
+ else
+ alignment = bfd_section_alignment (ibfd, isection);
+
/* FIXME: This is probably not enough. If we change the LMA we
may have to recompute the header for the file as well. */
if (!bfd_set_section_alignment (obfd,
osection,
- bfd_section_alignment (ibfd, isection)))
+ alignment))
{
err = _("failed to set alignment");
goto loser;
/* Wrapper for dealing with --remove-section (-R) command line arguments.
A special case is detected here, if the user asks to remove a relocation
- section (one starting with ".rela." or ".rel.") then this removal must
- be done using a different technique. */
+ section (one starting with ".rela" or ".rel") then this removal must
+ be done using a different technique in a relocatable object. */
static void
handle_remove_section_option (const char *section_pattern)
{
- if (strncmp (section_pattern, ".rela.", 6) == 0)
- handle_remove_relocations_option (section_pattern + 5);
- else if (strncmp (section_pattern, ".rel.", 5) == 0)
- handle_remove_relocations_option (section_pattern + 4);
- else
+ find_section_list (section_pattern, TRUE, SECTION_CONTEXT_REMOVE);
+ if (strncmp (section_pattern, ".rel", 4) == 0)
{
- find_section_list (section_pattern, TRUE, SECTION_CONTEXT_REMOVE);
- sections_removed = TRUE;
+ section_pattern += 4;
+ if (*section_pattern == 'a')
+ section_pattern++;
+ if (*section_pattern)
+ handle_remove_relocations_option (section_pattern);
}
+ sections_removed = TRUE;
}
/* Copy relocations in input section ISECTION of IBFD to an output
if (bfd_get_flavour (obfd) == bfd_target_coff_flavour
|| bfd_get_flavour (obfd) == bfd_target_elf_flavour)
{
- bfd_byte *syms, *strings;
+ bfd_byte *syms, *strings = NULL;
bfd_size_type symsize, stringsize;
asection *stabsec, *stabstrsec;
flagword flags;
{
bfd_nonfatal_message (NULL, obfd, NULL,
_("can't create debugging section"));
+ free (strings);
return FALSE;
}
{
bfd_nonfatal_message (NULL, obfd, NULL,
_("can't set debugging section contents"));
+ free (strings);
return FALSE;
}
int c;
int i;
char *output_file = NULL;
-
- merge_notes = TRUE;
+ bfd_boolean merge_notes_set = FALSE;
while ((c = getopt_long (argc, argv, "I:O:F:K:MN:R:o:sSpdgxXHhVvwDU",
strip_options, (int *) 0)) != EOF)
break;
case 'M':
merge_notes = TRUE;
+ merge_notes_set = TRUE;
break;
case OPTION_NO_MERGE_NOTES:
merge_notes = FALSE;
+ merge_notes_set = TRUE;
break;
case 'N':
add_specific_symbol (optarg, strip_specific_htab);
}
}
+ /* If the user has not expressly chosen to merge/not-merge ELF notes
+ then enable the merging unless we are stripping debug or dwo info. */
+ if (! merge_notes_set
+ && (strip_symbols == STRIP_UNDEF
+ || strip_symbols == STRIP_ALL
+ || strip_symbols == STRIP_UNNEEDED
+ || strip_symbols == STRIP_NONDEBUG
+ || strip_symbols == STRIP_NONDWO))
+ merge_notes = TRUE;
+
if (formats_info)
{
display_info ();
bfd_boolean show_version = FALSE;
bfd_boolean change_warn = TRUE;
bfd_boolean formats_info = FALSE;
+ bfd_boolean use_globalize = FALSE;
+ bfd_boolean use_keep_global = FALSE;
int c;
struct stat statbuf;
const bfd_arch_info_type *input_arch = NULL;
break;
case OPTION_GLOBALIZE_SYMBOL:
+ use_globalize = TRUE;
add_specific_symbol (optarg, globalize_specific_htab);
break;
case 'G':
+ use_keep_global = TRUE;
add_specific_symbol (optarg, keepglobal_specific_htab);
break;
}
break;
+ case OPTION_SET_SECTION_ALIGNMENT:
+ {
+ struct section_list *p;
+ const char *s;
+ int len;
+ char *name;
+ int align;
+
+ s = strchr (optarg, '=');
+ if (s == NULL)
+ fatal (_("bad format for %s"), "--set-section-alignment");
+
+ align = atoi(s+1);
+ if (align < 0)
+ fatal (_("bad format for %s"), "--set-section-alignment");
+
+ len = s - optarg;
+ name = (char *) xmalloc (len + 1);
+ strncpy (name, optarg, len);
+ name[len] = '\0';
+
+ p = find_section_list (name, TRUE, SECTION_CONTEXT_SET_ALIGNMENT);
+
+ p->alignment = align;
+ }
+ break;
+
case OPTION_RENAME_SECTION:
{
flagword flags;
break;
case OPTION_STRIP_SYMBOLS:
- add_specific_symbols (optarg, strip_specific_htab);
+ add_specific_symbols (optarg, strip_specific_htab,
+ &strip_specific_buffer);
break;
case OPTION_STRIP_UNNEEDED_SYMBOLS:
- add_specific_symbols (optarg, strip_unneeded_htab);
+ add_specific_symbols (optarg, strip_unneeded_htab,
+ &strip_unneeded_buffer);
break;
case OPTION_KEEP_SYMBOLS:
- add_specific_symbols (optarg, keep_specific_htab);
+ add_specific_symbols (optarg, keep_specific_htab,
+ &keep_specific_buffer);
break;
case OPTION_LOCALIZE_HIDDEN:
break;
case OPTION_LOCALIZE_SYMBOLS:
- add_specific_symbols (optarg, localize_specific_htab);
+ add_specific_symbols (optarg, localize_specific_htab,
+ &localize_specific_buffer);
break;
case OPTION_LONG_SECTION_NAMES:
break;
case OPTION_GLOBALIZE_SYMBOLS:
- add_specific_symbols (optarg, globalize_specific_htab);
+ use_globalize = TRUE;
+ add_specific_symbols (optarg, globalize_specific_htab,
+ &globalize_specific_buffer);
break;
case OPTION_KEEPGLOBAL_SYMBOLS:
- add_specific_symbols (optarg, keepglobal_specific_htab);
+ use_keep_global = TRUE;
+ add_specific_symbols (optarg, keepglobal_specific_htab,
+ &keepglobal_specific_buffer);
break;
case OPTION_WEAKEN_SYMBOLS:
- add_specific_symbols (optarg, weaken_specific_htab);
+ add_specific_symbols (optarg, weaken_specific_htab,
+ &weaken_specific_buffer);
break;
case OPTION_ALT_MACH_CODE:
pe_image_base = parse_vma (optarg, "--image-base");
break;
- case OPTION_SECTION_ALIGNMENT:
+ case OPTION_PE_SECTION_ALIGNMENT:
pe_section_alignment = parse_vma (optarg,
"--section-alignment");
break;
}
break;
+ case OPTION_VERILOG_DATA_WIDTH:
+ VerilogDataWidth = parse_vma (optarg, "--verilog-data-width");
+ if (VerilogDataWidth < 1)
+ fatal (_("verilog data width must be at least 1 byte"));
+ break;
+
case 0:
/* We've been given a long option. */
break;
}
}
+ if (use_globalize && use_keep_global)
+ fatal(_("--globalize-symbol(s) is incompatible with -G/--keep-global-symbol(s)"));
+
if (formats_info)
{
display_info ();
}
}
+ if (strip_specific_buffer)
+ free (strip_specific_buffer);
+
+ if (strip_unneeded_buffer)
+ free (strip_unneeded_buffer);
+
+ if (keep_specific_buffer)
+ free (keep_specific_buffer);
+
+ if (localize_specific_buffer)
+ free (globalize_specific_buffer);
+
+ if (globalize_specific_buffer)
+ free (globalize_specific_buffer);
+
+ if (keepglobal_specific_buffer)
+ free (keepglobal_specific_buffer);
+
+ if (weaken_specific_buffer)
+ free (weaken_specific_buffer);
+
return 0;
}
strip_symbols = STRIP_UNDEF;
discard_locals = LOCALS_UNDEF;
- bfd_init ();
+ if (bfd_init () != BFD_INIT_MAGIC)
+ fatal (_("fatal error: libbfd ABI mismatch"));
set_default_bfd_target ();
if (is_strip < 0)
projects / deliverable / binutils-gdb.git / blobdiff