/* objdump.c -- dump information about an object file.
Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2003
+ 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Free Software Foundation, Inc.
This file is part of GNU Binutils.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
/* Objdump overview.
4. dump_bfd() in turn calls separate functions to display the requested
item(s) of information(s). For example disassemble_data() is called if
- a disassmebly has been requested.
+ a disassembly has been requested.
When disassembling the code loops through blocks of instructions bounded
by symbols, calling disassemble_bytes() on each block. The actual
supplied by the disassembler() function. */
#include "bfd.h"
-#include "bfdver.h"
#include "progress.h"
#include "bucomm.h"
+#include "dwarf.h"
#include "budemang.h"
#include "getopt.h"
#include "safe-ctype.h"
#define BYTES_IN_WORD 32
#include "aout/aout64.h"
-#ifdef NEED_DECLARATION_FPRINTF
-/* This is needed by init_disassemble_info(). */
-extern int fprintf (FILE *, const char *, ...);
-#endif
-
/* Exit status. */
static int exit_status = 0;
static char *default_target = NULL; /* Default at runtime. */
-/* The following variables are set based on arguments passed on command line. */
+/* The following variables are set based on arguments passed on the
+ command line. */
static int show_version = 0; /* Show the version number. */
static int dump_section_contents; /* -s */
static int dump_section_headers; /* -h */
static int with_line_numbers; /* -l */
static bfd_boolean with_source_code; /* -S */
static int show_raw_insn; /* --show-raw-insn */
+static int dump_dwarf_section_info; /* --dwarf */
static int dump_stab_section_info; /* --stabs */
static int do_demangle; /* -C, --demangle */
static bfd_boolean disassemble; /* -d */
static bfd_vma stop_address = (bfd_vma) -1; /* --stop-address */
static int dump_debugging; /* --debugging */
static int dump_debugging_tags; /* --debugging-tags */
+static int dump_special_syms = 0; /* --special-syms */
static bfd_vma adjust_section_vma = 0; /* --adjust-vma */
static int file_start_context = 0; /* --file-start-context */
static const char **include_paths;
static int include_path_count;
-/* Extra info to pass to the section disassembler and address printing function. */
+/* Extra info to pass to the section disassembler and address printing
+ function. */
struct objdump_disasm_info
{
bfd * abfd;
arelent ** dynrelbuf;
long dynrelcount;
disassembler_ftype disassemble_fn;
+ arelent * reloc;
};
/* Architecture to disassemble for, or default if NULL. */
/* The dynamic symbol table. */
static asymbol **dynsyms;
+/* The synthetic symbol table. */
+static asymbol *synthsyms;
+static long synthcount = 0;
+
/* Number of symbols in `dynsyms'. */
static long dynsymcount = 0;
-g, --debugging Display debug information in object file\n\
-e, --debugging-tags Display debug information using ctags style\n\
-G, --stabs Display (in raw form) any STABS info in the file\n\
+ -W, --dwarf Display DWARF info in the file\n\
-t, --syms Display the contents of the symbol table(s)\n\
-T, --dynamic-syms Display the contents of the dynamic symbol table\n\
-r, --reloc Display the relocation entries in the file\n\
-R, --dynamic-reloc Display the dynamic relocation entries in the file\n\
+ @<file> Read options from <file>\n\
-v, --version Display this program's version number\n\
-i, --info List object formats and architectures supported\n\
-H, --help Display this information\n\
--prefix-addresses Print complete address alongside disassembly\n\
--[no-]show-raw-insn Display hex alongside symbolic disassembly\n\
--adjust-vma=OFFSET Add OFFSET to all displayed section addresses\n\
+ --special-syms Include special symbols in symbol dumps\n\
\n"));
list_supported_targets (program_name, stream);
list_supported_architectures (program_name, stream);
disassembler_usage (stream);
}
- if (status == 0)
+ if (REPORT_BUGS_TO[0] && status == 0)
fprintf (stream, _("Report bugs to %s.\n"), REPORT_BUGS_TO);
exit (status);
}
{"section-headers", no_argument, NULL, 'h'},
{"show-raw-insn", no_argument, &show_raw_insn, 1},
{"source", no_argument, NULL, 'S'},
+ {"special-syms", no_argument, &dump_special_syms, 1},
{"include", required_argument, NULL, 'I'},
+ {"dwarf", no_argument, NULL, 'W'},
{"stabs", no_argument, NULL, 'G'},
{"start-address", required_argument, NULL, OPTION_START_ADDRESS},
{"stop-address", required_argument, NULL, OPTION_STOP_ADDRESS},
}
\f
static void
-dump_section_header (bfd *abfd ATTRIBUTE_UNUSED, asection *section,
+dump_section_header (bfd *abfd, asection *section,
void *ignored ATTRIBUTE_UNUSED)
{
char *comma = "";
unsigned int opb = bfd_octets_per_byte (abfd);
+ /* Ignore linker created section. See elfNN_ia64_object_p in
+ bfd/elfxx-ia64.c. */
+ if (section->flags & SEC_LINKER_CREATED)
+ return;
+
printf ("%3d %-13s %08lx ", section->index,
bfd_get_section_name (abfd, section),
(unsigned long) bfd_section_size (abfd, section) / opb);
PF (SEC_NEVER_LOAD, "NEVER_LOAD");
PF (SEC_EXCLUDE, "EXCLUDE");
PF (SEC_SORT_ENTRIES, "SORT_ENTRIES");
- PF (SEC_BLOCK, "BLOCK");
- PF (SEC_CLINK, "CLINK");
+ if (bfd_get_arch (abfd) == bfd_arch_tic54x)
+ {
+ PF (SEC_TIC54X_BLOCK, "BLOCK");
+ PF (SEC_TIC54X_CLINK, "CLINK");
+ }
PF (SEC_SMALL_DATA, "SMALL_DATA");
- PF (SEC_SHARED, "SHARED");
- PF (SEC_ARCH_BIT_0, "ARCH_BIT_0");
+ if (bfd_get_flavour (abfd) == bfd_target_coff_flavour)
+ PF (SEC_COFF_SHARED, "SHARED");
PF (SEC_THREAD_LOCAL, "THREAD_LOCAL");
+ PF (SEC_GROUP, "GROUP");
if ((section->flags & SEC_LINK_ONCE) != 0)
{
const char *ls;
+ struct coff_comdat_info *comdat;
switch (section->flags & SEC_LINK_DUPLICATES)
{
}
printf ("%s%s", comma, ls);
- if (section->comdat != NULL)
- printf (" (COMDAT %s %ld)", section->comdat->name,
- section->comdat->symbol);
+ comdat = bfd_coff_get_comdat_section (abfd, section);
+ if (comdat != NULL)
+ printf (" (COMDAT %s %ld)", comdat->name, comdat->symbol);
comma = ", ";
}
if (sym->name == NULL || sym->name[0] == '\0')
continue;
- if (sym->flags & (BSF_DEBUGGING))
+ if (sym->flags & (BSF_DEBUGGING | BSF_SECTION_SYM))
continue;
if (bfd_is_und_section (sym->section)
|| bfd_is_com_section (sym->section))
{
char buf[30];
char *p;
- struct objdump_disasm_info *aux
- = (struct objdump_disasm_info *) info->application_data;
+ struct objdump_disasm_info *aux;
+ aux = (struct objdump_disasm_info *) info->application_data;
bfd_sprintf_vma (aux->abfd, buf, vma);
if (! skip_zeroes)
p = buf;
free (alloc);
}
-/* Locate a symbol given a bfd, a section, and a VMA. If REQUIRE_SEC
- is TRUE, then always require the symbol to be in the section. This
- returns NULL if there is no suitable symbol. If PLACE is not NULL,
- then *PLACE is set to the index of the symbol in sorted_syms. */
+/* Locate a symbol given a bfd and a section (from INFO->application_data),
+ and a VMA. If INFO->application_data->require_sec is TRUE, then always
+ require the symbol to be in the section. Returns NULL if there is no
+ suitable symbol. If PLACE is not NULL, then *PLACE is set to the index
+ of the symbol in sorted_syms. */
static asymbol *
-find_symbol_for_address (bfd *abfd, asection *sec, bfd_vma vma,
- bfd_boolean require_sec, long *place)
+find_symbol_for_address (bfd_vma vma,
+ struct disassemble_info *info,
+ long *place)
{
/* @@ Would it speed things up to cache the last two symbols returned,
and maybe their address ranges? For many processors, only one memory
long min = 0;
long max = sorted_symcount;
long thisplace;
- unsigned int opb = bfd_octets_per_byte (abfd);
+ struct objdump_disasm_info *aux;
+ bfd *abfd;
+ asection *sec;
+ unsigned int opb;
if (sorted_symcount < 1)
return NULL;
+ aux = (struct objdump_disasm_info *) info->application_data;
+ abfd = aux->abfd;
+ sec = aux->sec;
+ opb = bfd_octets_per_byte (abfd);
+
/* Perform a binary search looking for the closest symbol to the
required value. We are searching the range (min, max]. */
while (min + 1 < max)
no way to tell what's desired without looking at the relocation
table. */
if (sorted_syms[thisplace]->section != sec
- && (require_sec
+ && (aux->require_sec
|| ((abfd->flags & HAS_RELOC) != 0
&& vma >= bfd_get_section_vma (abfd, sec)
&& vma < (bfd_get_section_vma (abfd, sec)
}
if (sorted_syms[thisplace]->section != sec
- && (require_sec
+ && (aux->require_sec
|| ((abfd->flags & HAS_RELOC) != 0
&& vma >= bfd_get_section_vma (abfd, sec)
&& vma < (bfd_get_section_vma (abfd, sec)
+ bfd_section_size (abfd, sec)))))
- {
- /* There is no suitable symbol. */
- return NULL;
- }
+ /* There is no suitable symbol. */
+ return NULL;
+ }
+
+ /* Give the target a chance to reject the symbol. */
+ while (! info->symbol_is_valid (sorted_syms [thisplace], info))
+ {
+ ++ thisplace;
+ if (thisplace >= sorted_symcount
+ || bfd_asymbol_value (sorted_syms [thisplace]) > vma)
+ return NULL;
}
if (place != NULL)
If SKIP_ZEROES is TRUE, don't output leading zeroes. */
static void
-objdump_print_addr (bfd_vma vma, struct disassemble_info *info,
+objdump_print_addr (bfd_vma vma,
+ struct disassemble_info *info,
bfd_boolean skip_zeroes)
{
struct objdump_disasm_info *aux;
- asymbol *sym;
+ asymbol *sym = NULL; /* Initialize to avoid compiler warning. */
+ bfd_boolean skip_find = FALSE;
if (sorted_symcount < 1)
{
}
aux = (struct objdump_disasm_info *) info->application_data;
- sym = find_symbol_for_address (aux->abfd, aux->sec, vma, aux->require_sec,
- NULL);
+
+ if (aux->reloc != NULL
+ && aux->reloc->sym_ptr_ptr != NULL
+ && * aux->reloc->sym_ptr_ptr != NULL)
+ {
+ sym = * aux->reloc->sym_ptr_ptr;
+
+ /* Adjust the vma to the reloc. */
+ vma += bfd_asymbol_value (sym);
+
+ if (bfd_is_und_section (bfd_get_section (sym)))
+ skip_find = TRUE;
+ }
+
+ if (!skip_find)
+ sym = find_symbol_for_address (vma, info, NULL);
+
objdump_print_addr_with_sym (aux->abfd, aux->sec, sym, vma, info,
skip_zeroes);
}
objdump_print_addr (vma, info, ! prefix_addresses);
}
-/* Determine of the given address has a symbol associated with it. */
+/* Determine if the given address has a symbol associated with it. */
static int
objdump_symbol_at_address (bfd_vma vma, struct disassemble_info * info)
{
- struct objdump_disasm_info * aux;
asymbol * sym;
- /* No symbols - do not bother checking. */
- if (sorted_symcount < 1)
- return 0;
-
- aux = (struct objdump_disasm_info *) info->application_data;
- sym = find_symbol_for_address (aux->abfd, aux->sec, vma, aux->require_sec,
- NULL);
+ sym = find_symbol_for_address (vma, info, NULL);
return (sym != NULL && (bfd_asymbol_value (sym) == vma));
}
typedef struct
{
char *buffer;
- size_t size;
- char *current;
+ size_t pos;
+ size_t alloc;
} SFILE;
/* sprintf to a "stream". */
-static int
+static int ATTRIBUTE_PRINTF_2
objdump_sprintf (SFILE *f, const char *format, ...)
{
- char *buf;
size_t n;
va_list args;
- va_start (args, format);
-
- vasprintf (&buf, format, args);
-
- if (buf == NULL)
+ while (1)
{
+ size_t space = f->alloc - f->pos;
+
+ va_start (args, format);
+ n = vsnprintf (f->buffer + f->pos, space, format, args);
va_end (args);
- fatal (_("Out of virtual memory"));
- }
- n = strlen (buf);
-
- while ((size_t) ((f->buffer + f->size) - f->current) < n + 1)
- {
- size_t curroff;
-
- curroff = f->current - f->buffer;
- f->size *= 2;
- f->buffer = xrealloc (f->buffer, f->size);
- f->current = f->buffer + curroff;
+ if (space > n)
+ break;
+
+ f->alloc = (f->alloc + n) * 2;
+ f->buffer = xrealloc (f->buffer, f->alloc);
}
-
- memcpy (f->current, buf, n);
- f->current += n;
- f->current[0] = '\0';
-
- free (buf);
-
- va_end (args);
+ f->pos += n;
+
return n;
}
/* The number of zeroes we want to see before we start skipping them.
The number is arbitrarily chosen. */
-#ifndef SKIP_ZEROES
-#define SKIP_ZEROES (8)
-#endif
+#define DEFAULT_SKIP_ZEROES 8
/* The number of zeroes to skip at the end of a section. If the
number of zeroes at the end is between SKIP_ZEROES_AT_END and
attempt to avoid disassembling zeroes inserted by section
alignment. */
-#ifndef SKIP_ZEROES_AT_END
-#define SKIP_ZEROES_AT_END (3)
-#endif
+#define DEFAULT_SKIP_ZEROES_AT_END 3
/* Disassemble some data in memory between given values. */
bfd_boolean done_dot;
int skip_addr_chars;
bfd_vma addr_offset;
- int opb = info->octets_per_byte;
+ unsigned int opb = info->octets_per_byte;
+ unsigned int skip_zeroes = info->skip_zeroes;
+ unsigned int skip_zeroes_at_end = info->skip_zeroes_at_end;
+ int octets = opb;
+ SFILE sfile;
aux = (struct objdump_disasm_info *) info->application_data;
section = aux->sec;
+ sfile.alloc = 120;
+ sfile.buffer = xmalloc (sfile.alloc);
+ sfile.pos = 0;
+
if (insns)
octets_per_line = 4;
else
while (addr_offset < stop_offset)
{
bfd_vma z;
- int octets = 0;
bfd_boolean need_nl = FALSE;
+ int previous_octets;
+
+ /* Remember the length of the previous instruction. */
+ previous_octets = octets;
+ octets = 0;
/* If we see more than SKIP_ZEROES octets of zeroes, we just
print `...'. */
if (! disassemble_zeroes
&& (info->insn_info_valid == 0
|| info->branch_delay_insns == 0)
- && (z - addr_offset * opb >= SKIP_ZEROES
+ && (z - addr_offset * opb >= skip_zeroes
|| (z == stop_offset * opb &&
- z - addr_offset * opb < SKIP_ZEROES_AT_END)))
+ z - addr_offset * opb < skip_zeroes_at_end)))
{
printf ("\t...\n");
else
{
char buf[50];
- SFILE sfile;
int bpc = 0;
int pb = 0;
done_dot = FALSE;
if (with_line_numbers || with_source_code)
- /* The line number tables will refer to unadjusted
- section VMAs, so we must undo any VMA modifications
- when calling show_line. */
- show_line (aux->abfd, section, addr_offset - adjust_section_vma);
+ show_line (aux->abfd, section, addr_offset);
if (! prefix_addresses)
{
if (insns)
{
- sfile.size = 120;
- sfile.buffer = xmalloc (sfile.size);
- sfile.current = sfile.buffer;
+ sfile.pos = 0;
info->fprintf_func = (fprintf_ftype) objdump_sprintf;
- info->stream = (FILE *) &sfile;
+ info->stream = &sfile;
info->bytes_per_line = 0;
info->bytes_per_chunk = 0;
+ info->flags = 0;
-#ifdef DISASSEMBLER_NEEDS_RELOCS
- /* FIXME: This is wrong. It tests the number of octets
- in the last instruction, not the current one. */
- if (*relppp < relppend
- && (**relppp)->address >= rel_offset + addr_offset
- && ((**relppp)->address
- < rel_offset + addr_offset + octets / opb))
- info->flags = INSN_HAS_RELOC;
- else
-#endif
- info->flags = 0;
+ if (info->disassembler_needs_relocs
+ && *relppp < relppend)
+ {
+ bfd_signed_vma distance_to_rel;
+
+ distance_to_rel = (**relppp)->address
+ - (rel_offset + addr_offset);
+
+ /* Check to see if the current reloc is associated with
+ the instruction that we are about to disassemble. */
+ if (distance_to_rel == 0
+ /* FIXME: This is wrong. We are trying to catch
+ relocs that are addressed part way through the
+ current instruction, as might happen with a packed
+ VLIW instruction. Unfortunately we do not know the
+ length of the current instruction since we have not
+ disassembled it yet. Instead we take a guess based
+ upon the length of the previous instruction. The
+ proper solution is to have a new target-specific
+ disassembler function which just returns the length
+ of an instruction at a given address without trying
+ to display its disassembly. */
+ || (distance_to_rel > 0
+ && distance_to_rel < (bfd_signed_vma) (previous_octets/ opb)))
+ {
+ info->flags = INSN_HAS_RELOC;
+ aux->reloc = **relppp;
+ }
+ else
+ aux->reloc = NULL;
+ }
octets = (*disassemble_fn) (section->vma + addr_offset, info);
info->fprintf_func = (fprintf_ftype) fprintf;
octets_per_line = info->bytes_per_line;
if (octets < 0)
{
- if (sfile.current != sfile.buffer)
+ if (sfile.pos)
printf ("%s\n", sfile.buffer);
- free (sfile.buffer);
break;
}
}
for (j = addr_offset * opb; j < addr_offset * opb + pb; j += bpc)
{
int k;
+
if (bpc > 1 && info->display_endian == BFD_ENDIAN_LITTLE)
{
for (k = bpc - 1; k >= 0; k--)
if (! insns)
printf ("%s", buf);
- else
- {
- printf ("%s", sfile.buffer);
- free (sfile.buffer);
- }
+ else if (sfile.pos)
+ printf ("%s", sfile.buffer);
if (prefix_addresses
? show_raw_insn > 0
else
printf ("\t\t\t");
- objdump_print_value (section->vma + q->address, info, TRUE);
+ objdump_print_value (section->vma - rel_offset + q->address,
+ info, TRUE);
- printf (": %s\t", q->howto->name);
+ if (q->howto == NULL)
+ printf (": *unknown*\t");
+ else if (q->howto->name)
+ printf (": %s\t", q->howto->name);
+ else
+ printf (": %d\t", q->howto->type);
if (q->sym_ptr_ptr == NULL || *q->sym_ptr_ptr == NULL)
printf ("*unknown*");
addr_offset += octets / opb;
}
+
+ free (sfile.buffer);
}
static void
disassemble_section (bfd *abfd, asection *section, void *info)
{
struct disassemble_info * pinfo = (struct disassemble_info *) info;
- struct objdump_disasm_info * paux = (struct objdump_disasm_info *) pinfo->application_data;
+ struct objdump_disasm_info * paux;
unsigned int opb = pinfo->octets_per_byte;
bfd_byte * data = NULL;
bfd_size_type datasize = 0;
code are not normally disassembled. */
if (! disassemble_all
&& only == NULL
- && (section->flags & SEC_CODE) == 0)
+ && ((section->flags & (SEC_CODE | SEC_HAS_CONTENTS))
+ != (SEC_CODE | SEC_HAS_CONTENTS)))
return;
if (! process_section_p (section))
return;
- datasize = bfd_get_section_size_before_reloc (section);
+ datasize = bfd_get_section_size (section);
if (datasize == 0)
return;
/* Decide which set of relocs to use. Load them if necessary. */
+ paux = (struct objdump_disasm_info *) pinfo->application_data;
if (paux->dynrelbuf)
{
rel_pp = paux->dynrelbuf;
/* Dynamic reloc addresses are absolute, non-dynamic are section
relative. REL_OFFSET specifies the reloc address corresponding
to the start of this section. */
- rel_offset = pinfo->buffer_vma;
+ rel_offset = section->vma;
}
else
{
rel_offset = 0;
if ((section->flags & SEC_RELOC) != 0
-#ifndef DISASSEMBLER_NEEDS_RELOCS
- && dump_reloc_info
-#endif
- )
+ && (dump_reloc_info || pinfo->disassembler_needs_relocs))
{
long relsize;
printf (_("Disassembly of section %s:\n"), section->name);
/* Find the nearest symbol forwards from our current position. */
- sym = find_symbol_for_address (abfd, section, section->vma + addr_offset,
- TRUE, &place);
+ paux->require_sec = TRUE;
+ sym = find_symbol_for_address (section->vma + addr_offset, info, &place);
+ paux->require_sec = FALSE;
/* Disassemble a block of instructions up to the address associated with
the symbol we have just found. Then print the symbol and find the
or we have reached the end of the address range we are interested in. */
while (addr_offset < stop_offset)
{
+ bfd_vma addr;
asymbol *nextsym;
unsigned long nextstop_offset;
bfd_boolean insns;
- if (sym != NULL
- && bfd_asymbol_value (sym) <= section->vma + addr_offset)
+ addr = section->vma + addr_offset;
+
+ if (sym != NULL && bfd_asymbol_value (sym) <= addr)
{
int x;
for (x = place;
(x < sorted_symcount
- && (bfd_asymbol_value (sorted_syms[x])
- <= section->vma + addr_offset));
+ && (bfd_asymbol_value (sorted_syms[x]) <= addr));
++x)
continue;
- pinfo->symbols = & sorted_syms[place];
+ pinfo->symbols = sorted_syms + place;
pinfo->num_symbols = x - place;
+ pinfo->symtab_pos = place;
}
else
- pinfo->symbols = NULL;
+ {
+ pinfo->symbols = NULL;
+ pinfo->num_symbols = 0;
+ pinfo->symtab_pos = -1;
+ }
if (! prefix_addresses)
{
pinfo->fprintf_func (pinfo->stream, "\n");
- objdump_print_addr_with_sym (abfd, section, sym,
- section->vma + addr_offset,
+ objdump_print_addr_with_sym (abfd, section, sym, addr,
pinfo, FALSE);
pinfo->fprintf_func (pinfo->stream, ":\n");
}
- if (sym != NULL
- && bfd_asymbol_value (sym) > section->vma + addr_offset)
+ if (sym != NULL && bfd_asymbol_value (sym) > addr)
nextsym = sym;
else if (sym == NULL)
nextsym = NULL;
else
{
+#define is_valid_next_sym(SYM) \
+ ((SYM)->section == section \
+ && (bfd_asymbol_value (SYM) > bfd_asymbol_value (sym)) \
+ && pinfo->symbol_is_valid (SYM, pinfo))
+
/* Search forward for the next appropriate symbol in
SECTION. Note that all the symbols are sorted
together into one big array, and that some sections
may have overlapping addresses. */
while (place < sorted_symcount
- && (sorted_syms[place]->section != section
- || (bfd_asymbol_value (sorted_syms[place])
- <= bfd_asymbol_value (sym))))
+ && ! is_valid_next_sym (sorted_syms [place]))
++place;
+
if (place >= sorted_symcount)
nextsym = NULL;
else
nextsym = sorted_syms[place];
}
- if (sym != NULL
- && bfd_asymbol_value (sym) > section->vma + addr_offset)
- {
- nextstop_offset = bfd_asymbol_value (sym) - section->vma;
- if (nextstop_offset > stop_offset)
- nextstop_offset = stop_offset;
- }
+ if (sym != NULL && bfd_asymbol_value (sym) > addr)
+ nextstop_offset = bfd_asymbol_value (sym) - section->vma;
else if (nextsym == NULL)
nextstop_offset = stop_offset;
else
- {
- nextstop_offset = bfd_asymbol_value (nextsym) - section->vma;
- if (nextstop_offset > stop_offset)
- nextstop_offset = stop_offset;
- }
+ nextstop_offset = bfd_asymbol_value (nextsym) - section->vma;
+
+ if (nextstop_offset > stop_offset)
+ nextstop_offset = stop_offset;
/* If a symbol is explicitly marked as being an object
rather than a function, just dump the bytes without
disassembling them. */
if (disassemble_all
|| sym == NULL
- || bfd_asymbol_value (sym) > section->vma + addr_offset
+ || bfd_asymbol_value (sym) > addr
|| ((sym->flags & BSF_OBJECT) == 0
&& (strstr (bfd_asymbol_name (sym), "gnu_compiled")
== NULL)
{
struct disassemble_info disasm_info;
struct objdump_disasm_info aux;
+ long i;
print_files = NULL;
prev_functionname = NULL;
/* We make a copy of syms to sort. We don't want to sort syms
because that will screw up the relocs. */
- sorted_syms = xmalloc (symcount * sizeof (asymbol *));
- memcpy (sorted_syms, syms, symcount * sizeof (asymbol *));
+ sorted_symcount = symcount ? symcount : dynsymcount;
+ sorted_syms = xmalloc ((sorted_symcount + synthcount) * sizeof (asymbol *));
+ memcpy (sorted_syms, symcount ? syms : dynsyms,
+ sorted_symcount * sizeof (asymbol *));
+
+ sorted_symcount = remove_useless_symbols (sorted_syms, sorted_symcount);
- sorted_symcount = remove_useless_symbols (sorted_syms, symcount);
+ for (i = 0; i < synthcount; ++i)
+ {
+ sorted_syms[sorted_symcount] = synthsyms + i;
+ ++sorted_symcount;
+ }
/* Sort the symbols into section and symbol order. */
qsort (sorted_syms, sorted_symcount, sizeof (asymbol *), compare_symbols);
- init_disassemble_info (&disasm_info, stdout, fprintf);
+ init_disassemble_info (&disasm_info, stdout, (fprintf_ftype) fprintf);
disasm_info.application_data = (void *) &aux;
aux.abfd = abfd;
aux.require_sec = FALSE;
aux.dynrelbuf = NULL;
aux.dynrelcount = 0;
+ aux.reloc = NULL;
disasm_info.print_address_func = objdump_print_address;
disasm_info.symbol_at_address_func = objdump_symbol_at_address;
disasm_info.mach = bfd_get_mach (abfd);
disasm_info.disassembler_options = disassembler_options;
disasm_info.octets_per_byte = bfd_octets_per_byte (abfd);
+ disasm_info.skip_zeroes = DEFAULT_SKIP_ZEROES;
+ disasm_info.skip_zeroes_at_end = DEFAULT_SKIP_ZEROES_AT_END;
+ disasm_info.disassembler_needs_relocs = FALSE;
if (bfd_big_endian (abfd))
disasm_info.display_endian = disasm_info.endian = BFD_ENDIAN_BIG;
instead. */
disasm_info.endian = BFD_ENDIAN_UNKNOWN;
+ /* Allow the target to customize the info structure. */
+ disassemble_init_for_target (& disasm_info);
+
/* Pre-load the dynamic relocs if we are going
to be dumping them along with the disassembly. */
if (dump_dynamic_reloc_info)
if (relsize > 0)
{
aux.dynrelbuf = xmalloc (relsize);
- aux.dynrelcount = bfd_canonicalize_dynamic_reloc (abfd, aux.dynrelbuf, dynsyms);
+ aux.dynrelcount = bfd_canonicalize_dynamic_reloc (abfd,
+ aux.dynrelbuf,
+ dynsyms);
if (aux.dynrelcount < 0)
bfd_fatal (bfd_get_filename (abfd));
/* Sort the relocs by address. */
- qsort (aux.dynrelbuf, aux.dynrelcount, sizeof (arelent *), compare_relocs);
+ qsort (aux.dynrelbuf, aux.dynrelcount, sizeof (arelent *),
+ compare_relocs);
}
}
+ disasm_info.symtab = sorted_syms;
+ disasm_info.symtab_size = sorted_symcount;
bfd_map_over_sections (abfd, disassemble_section, & disasm_info);
free (sorted_syms);
}
\f
+int
+load_debug_section (enum dwarf_section_display_enum debug, void *file)
+{
+ struct dwarf_section *section = &debug_displays [debug].section;
+ bfd *abfd = file;
+ asection *sec;
+ bfd_boolean ret;
+
+ /* If it is already loaded, do nothing. */
+ if (section->start != NULL)
+ return 1;
+
+ /* Locate the debug section. */
+ sec = bfd_get_section_by_name (abfd, section->name);
+ if (sec == NULL)
+ return 0;
+
+ section->address = bfd_get_section_vma (abfd, sec);
+ section->size = bfd_get_section_size (sec);
+ section->start = xmalloc (section->size);
+
+ if (is_relocatable && debug_displays [debug].relocate)
+ ret = bfd_simple_get_relocated_section_contents (abfd,
+ sec,
+ section->start,
+ syms) != NULL;
+ else
+ ret = bfd_get_section_contents (abfd, sec, section->start, 0,
+ section->size);
+
+ if (!ret)
+ {
+ free_debug_section (debug);
+ printf (_("\nCan't get contents for section '%s'.\n"),
+ section->name);
+ }
+
+ return ret;
+}
+
+void
+free_debug_section (enum dwarf_section_display_enum debug)
+{
+ struct dwarf_section *section = &debug_displays [debug].section;
+
+ if (section->start == NULL)
+ return;
+
+ free ((char *) section->start);
+ section->start = NULL;
+ section->address = 0;
+ section->size = 0;
+}
+
+static void
+dump_dwarf_section (bfd *abfd, asection *section,
+ void *arg ATTRIBUTE_UNUSED)
+{
+ const char *name = bfd_get_section_name (abfd, section);
+ const char *match;
+ enum dwarf_section_display_enum i;
+
+ if (CONST_STRNEQ (name, ".gnu.linkonce.wi."))
+ match = ".debug_info";
+ else
+ match = name;
+
+ for (i = 0; i < max; i++)
+ if (strcmp (debug_displays[i].section.name, match) == 0)
+ {
+ if (!debug_displays[i].eh_frame)
+ {
+ struct dwarf_section *sec = &debug_displays [i].section;
+
+ if (load_debug_section (i, abfd))
+ {
+ debug_displays[i].display (sec, abfd);
+
+ if (i != info && i != abbrev)
+ free_debug_section (i);
+ }
+ }
+ break;
+ }
+}
+
+static const char *mach_o_dwarf_sections [] = {
+ "LC_SEGMENT.__DWARFA.__debug_abbrev", /* .debug_abbrev */
+ "LC_SEGMENT.__DWARFA.__debug_aranges", /* .debug_aranges */
+ "LC_SEGMENT.__DWARFA.__debug_frame", /* .debug_frame */
+ "LC_SEGMENT.__DWARFA.__debug_info", /* .debug_info */
+ "LC_SEGMENT.__DWARFA.__debug_line", /* .debug_line */
+ "LC_SEGMENT.__DWARFA.__debug_pubnames", /* .debug_pubnames */
+ ".eh_frame", /* .eh_frame */
+ "LC_SEGMENT.__DWARFA.__debug_macinfo", /* .debug_macinfo */
+ "LC_SEGMENT.__DWARFA.__debug_str", /* .debug_str */
+ "LC_SEGMENT.__DWARFA.__debug_loc", /* .debug_loc */
+ "LC_SEGMENT.__DWARFA.__debug_pubtypes", /* .debug_pubtypes */
+ "LC_SEGMENT.__DWARFA.__debug_ranges", /* .debug_ranges */
+ "LC_SEGMENT.__DWARFA.__debug_static_func", /* .debug_static_func */
+ "LC_SEGMENT.__DWARFA.__debug_static_vars", /* .debug_static_vars */
+ "LC_SEGMENT.__DWARFA.__debug_types", /* .debug_types */
+ "LC_SEGMENT.__DWARFA.__debug_weaknames" /* .debug_weaknames */
+};
+
+static const char *generic_dwarf_sections [max];
+
+static void
+check_mach_o_dwarf (bfd *abfd)
+{
+ static enum bfd_flavour old_flavour = bfd_target_unknown_flavour;
+ enum bfd_flavour current_flavour = bfd_get_flavour (abfd);
+ enum dwarf_section_display_enum i;
+
+ if (generic_dwarf_sections [0] == NULL)
+ for (i = 0; i < max; i++)
+ generic_dwarf_sections [i] = debug_displays[i].section.name;
+
+ if (old_flavour != current_flavour)
+ {
+ if (current_flavour == bfd_target_mach_o_flavour)
+ for (i = 0; i < max; i++)
+ debug_displays[i].section.name = mach_o_dwarf_sections [i];
+ else if (old_flavour == bfd_target_mach_o_flavour)
+ for (i = 0; i < max; i++)
+ debug_displays[i].section.name = generic_dwarf_sections [i];
+
+ old_flavour = current_flavour;
+ }
+}
+
+/* Dump the dwarf debugging information. */
+
+static void
+dump_dwarf (bfd *abfd)
+{
+ is_relocatable = ((abfd->flags & (HAS_RELOC | EXEC_P | DYNAMIC))
+ == HAS_RELOC);
+
+ /* FIXME: bfd_get_arch_size may return -1. We assume that 64bit
+ targets will return 64. */
+ eh_addr_size = bfd_get_arch_size (abfd) == 64 ? 8 : 4;
+
+ if (bfd_big_endian (abfd))
+ byte_get = byte_get_big_endian;
+ else if (bfd_little_endian (abfd))
+ byte_get = byte_get_little_endian;
+ else
+ abort ();
+
+ check_mach_o_dwarf (abfd);
+
+ bfd_map_over_sections (abfd, dump_dwarf_section, NULL);
+
+ free_debug_memory ();
+}
+\f
/* Read ABFD's stabs section STABSECT_NAME, and return a pointer to
it. Return NULL on failure. */
using string table section STRSECT_NAME (in `strtab'). */
static void
-print_section_stabs (bfd *abfd, const char *stabsect_name, unsigned *string_offset_ptr)
+print_section_stabs (bfd *abfd,
+ const char *stabsect_name,
+ unsigned *string_offset_ptr)
{
int i;
unsigned file_string_table_offset = 0;
if (strtab)
{
- stabs = read_section_stabs (abfd, section->name, &stab_size);
+ stabs = (bfd_byte *) read_section_stabs (abfd, section->name,
+ &stab_size);
if (stabs)
print_section_stabs (abfd, section->name, &sought->string_offset);
}
bfd *cur_bfd;
if (*current == NULL)
- printf (_("no information for the %ld'th symbol"), count);
+ printf (_("no information for symbol number %ld\n"), count);
else if ((cur_bfd = bfd_asymbol_bfd (*current)) == NULL)
- printf (_("could not determine the type of the %ld'th symbol"),
+ printf (_("could not determine the type of symbol number %ld\n"),
count);
- else
+ else if (process_section_p ((* current)->section)
+ && (dump_special_syms
+ || !bfd_is_target_special_symbol (cur_bfd, *current)))
{
const char *name = (*current)->name;
else
bfd_print_symbol (cur_bfd, stdout, *current,
bfd_print_symbol_all);
+ printf ("\n");
}
- printf ("\n");
current++;
}
printf ("\n\n");
section_name = NULL;
}
+ bfd_printf_vma (abfd, q->address);
+ if (q->howto == NULL)
+ printf (" *unknown* ");
+ else if (q->howto->name)
+ printf (" %-16s ", q->howto->name);
+ else
+ printf (" %-16d ", q->howto->type);
if (sym_name)
- {
- bfd_printf_vma (abfd, q->address);
- if (q->howto->name)
- printf (" %-16s ", q->howto->name);
- else
- printf (" %-16d ", q->howto->type);
- objdump_print_symname (abfd, NULL, *q->sym_ptr_ptr);
- }
+ objdump_print_symname (abfd, NULL, *q->sym_ptr_ptr);
else
{
if (section_name == NULL)
section_name = "*unknown*";
- bfd_printf_vma (abfd, q->address);
- printf (" %-16s [%s]",
- q->howto->name,
- section_name);
+ printf ("[%s]", section_name);
}
if (q->addend)
}
static void
-dump_relocs_in_section (bfd *abfd, asection *section, void *dummy ATTRIBUTE_UNUSED)
+dump_relocs_in_section (bfd *abfd,
+ asection *section,
+ void *dummy ATTRIBUTE_UNUSED)
{
arelent **relpp;
long relcount;
}
static void
-adjust_addresses (bfd *abfd ATTRIBUTE_UNUSED, asection *section, void *dummy ATTRIBUTE_UNUSED)
+adjust_addresses (bfd *abfd ATTRIBUTE_UNUSED,
+ asection *section,
+ void *arg)
{
- section->vma += adjust_section_vma;
- section->lma += adjust_section_vma;
+ if ((section->flags & SEC_DEBUGGING) == 0)
+ {
+ bfd_boolean *has_reloc_p = (bfd_boolean *) arg;
+ section->vma += adjust_section_vma;
+ if (*has_reloc_p)
+ section->lma += adjust_section_vma;
+ }
}
/* Dump selected contents of ABFD. */
the BFD information is a hack. However, we must do it, or
bfd_find_nearest_line will not do the right thing. */
if (adjust_section_vma != 0)
- bfd_map_over_sections (abfd, adjust_addresses, NULL);
+ {
+ bfd_boolean has_reloc = (abfd->flags & HAS_RELOC);
+ bfd_map_over_sections (abfd, adjust_addresses, &has_reloc);
+ }
if (! dump_debugging_tags)
printf (_("\n%s: file format %s\n"), bfd_get_filename (abfd),
if (dump_section_headers)
dump_headers (abfd);
- if (dump_symtab || dump_reloc_info || disassemble || dump_debugging)
+ if (dump_symtab
+ || dump_reloc_info
+ || disassemble
+ || dump_debugging
+ || dump_dwarf_section_info)
syms = slurp_symtab (abfd);
- if (dump_dynamic_symtab || dump_dynamic_reloc_info)
+ if (dump_dynamic_symtab || dump_dynamic_reloc_info
+ || (disassemble && bfd_get_dynamic_symtab_upper_bound (abfd) > 0))
dynsyms = slurp_dynamic_symtab (abfd);
+ if (disassemble)
+ {
+ synthcount = bfd_get_synthetic_symtab (abfd, symcount, syms,
+ dynsymcount, dynsyms, &synthsyms);
+ if (synthcount < 0)
+ synthcount = 0;
+ }
if (dump_symtab)
dump_symbols (abfd, FALSE);
if (dump_dynamic_symtab)
dump_symbols (abfd, TRUE);
+ if (dump_dwarf_section_info)
+ dump_dwarf (abfd);
if (dump_stab_section_info)
dump_stabs (abfd);
if (dump_reloc_info && ! disassemble)
free (dynsyms);
dynsyms = NULL;
}
+
+ if (synthsyms)
+ {
+ free (synthsyms);
+ synthsyms = NULL;
+ }
+
+ symcount = 0;
+ dynsymcount = 0;
+ synthcount = 0;
}
static void
bfd *arfile = NULL;
if (get_file_size (filename) < 1)
- return;
+ {
+ exit_status = 1;
+ return;
+ }
file = bfd_openr (filename, target);
if (file == NULL)
START_PROGRESS (program_name, 0);
+ expandargv (&argc, &argv);
+
bfd_init ();
set_default_bfd_target ();
- while ((c = getopt_long (argc, argv, "pib:m:M:VvCdDlfaHhrRtTxsSI:j:wE:zgeG",
+ while ((c = getopt_long (argc, argv, "pib:m:M:VvCdDlfaHhrRtTxsSI:j:wE:zgeGW",
long_options, (int *) 0))
!= EOF)
{
do_demangle = TRUE;
seenflag = TRUE;
break;
+ case 'W':
+ dump_dwarf_section_info = TRUE;
+ seenflag = TRUE;
+ do_debug_info = 1;
+ do_debug_abbrevs = 1;
+ do_debug_lines = 1;
+ do_debug_pubnames = 1;
+ do_debug_aranges = 1;
+ do_debug_ranges = 1;
+ do_debug_frames = 1;
+ do_debug_macinfo = 1;
+ do_debug_str = 1;
+ do_debug_loc = 1;
+ break;
case 'G':
dump_stab_section_info = TRUE;
seenflag = TRUE;