-1999-03-12 Nick Clifton <nickc@cygnus.com>
+2004-05-12 Ben Elliston <bje@au.ibm.com>
- * binutils-all/readelf.wi: Remove FR30 specific componnts.
- * binutils-all/readelf.s: Remove RELA specific components.
-
-1999-02-16 Nick Clifton <nickc@cygnus.com>
-
- * binutils-all/readelf.s: Do not assume section alignment is 4.
- * binutils-all/readelf.r: Do not assume rela's are being used.
- * binutils-all/readelf.exp: disable tests for non ELF based
- targets.
-
-1999-02-02 Nick Clifton <nickc@cygnus.com>
-
- * binutils-all/readelf.wi: Amend to match new readelf output.
- * binutils-all/readelf.r: Do not assume that RELAs will be used.
-
-1999-01-29 Nick Clifton <nickc@cygnus.com>
-
- * config/default.exp: Add definitions of READELF and READELFFLAGS.
-
- * binutils-all/readelf.exp: New file: Readelf tests
- * binutils-all/readelf.h: New file: Expected results for 'readelf -h'
- * binutils-all/readelf.s: New file: Expected results for 'readelf -S'
- * binutils-all/readelf.ss: New file: Expected results for 'readelf -s'
- * binutils-all/readelf.r: New file: Expected results for 'readelf -r'
- * binutils-all/readelf.wi: New file: Expected results for 'readelf -wi'
-
-Wed Dec 9 19:11:39 1998 Jeffrey A Law (law@cygnus.com)
-
- * binutils-all/objcopy.exp (copy_executable): Expect comparison
- failure for mips*-*-elf.
-
-Fri Oct 16 22:57:12 1998 Felix Lee <flee@cygnus.com>
-
- * binutils-all/objcopy.exp: fix "no symbols" message.
-
-Tue Jul 28 15:14:04 1998 Jeffrey A Law (law@cygnus.com)
-
- * binutils-all/objcopy.exp: Keep "main" and "_main" for strip with
- saving symbol tests. Look for either "main" or "_main" in the output
- file. Fix test for "no symbols" in the output file.
-
-1998-07-22 Vladimir N. Makarov <vmakarov@cygnus.com>
-
- * binutils-all/objcopy.exp: Polish output about fail for objcopy
- (simple copy), strip with/without saving a symbol for object file
- and executable.
-
-Wed Jul 1 16:27:40 1998 Nick Clifton <nickc@cygnus.com>
-
- * binutils-all/objcopy.exp: ARM simple objcopy now passes.
-
-Wed Jun 24 09:20:21 1998 Nick Clifton <nickc@cygnus.com>
-
- * binutils-all/objdump.exp: Look for '.data' rather than 'data'
- when parsing output of objdump -h.
- * binutils-all/size.exp: Look for '.data' rather than 'data' when
- parsing output of size -A.
-
-1998-07-20 Vladimir N. Makarov <vmakarov@cygnus.com>
-
- * objcopy.exp: Two new tests - strip object file with saving a
- symbol and strip executable file with saving a symbol.
-
-Fri May 29 14:50:24 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objcopy.exp: Don't xfail the simple objcopy test
- when cross compiling.
-
-Thu Nov 6 14:32:37 1997 Bob Manson <manson@charmed.cygnus.com>
-
- * lib/utils-lib.exp: Temporary definition of target_assemble and
- default_target_assemble so that testing can work with older
- dejagnu versions.
-
-Wed Sep 24 12:09:15 1997 Bob Manson <manson@charmed.cygnus.com>
-
- * binutils-all/objcopy.exp(strip_executable): Make a new copy of
- the executable being tested.
-
-Mon Sep 15 21:25:20 1997 Bob Manson <manson@charmed.cygnus.com>
-
- * binutils-all/objcopy.exp: Compile the executables to be tested
- on the target with a status wrapper (as necessary).
-
- * binutils-all/ar.exp: If testing on a remote host, don't bother
- looking on the local host for the program being tested. Use the
- correct filenames on the remote host.
-
- * binutils-all/nm.exp: Ditto.
-
- * binutils-all/size.exp: Ditto.
-
- * binutils-all/objdump.exp: Ditto.
- (cpus_expected): Add the target CPU to the regexp of CPUs to be
- expected, if it's not already there.
-
-Thu Aug 28 09:57:27 1997 Doug Evans <dje@canuck.cygnus.com>
-
- * binutils-all/objdump.exp (cpus_expected): Add arc.
-
-Tue Aug 5 00:03:20 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * config/default.exp: Look for nm-new and strip-new.
-
-Tue Jun 3 17:12:54 1997 Bob Manson <manson@charmed.cygnus.com>
-
- * config/default.exp: Remove expect_before statement.
-
- * binutils-all/objcopy.exp: Don't use global exec_output variable;
- the output is returned from remote_load instead.
-
-Mon May 12 22:14:20 1997 Bob Manson <manson@charmed.cygnus.com>
-
- * binutils-all/objcopy.exp(strip_test): Tests that
- fail to compile are untested, not unresolved.
- (copy_setup): Ditto.
-
- * lib/utils-lib.exp(default_binutils_assemble): Call
- target_assemble instead of target_compile.
-
-Wed Apr 30 20:37:51 1997 Bob Manson <manson@charmed.cygnus.com>
-
- Changes to support multilib and remote hosted testing, along with
- general cleanups and simplifications.
-
- * lib/utils-lib.exp(binutil_version): Use remote_exec.
- (default_binutils_run): Ditto.
- (default_binutils_assemble): Remove first argument; call
- target_compile to actually do the assembly.
- (default_binutils_compile,default_binutils_remove,prune_warnings):
- Delete.
-
- * config/default.exp: Remove AS and ASFLAGS.
- (binutils_compile,binutils_remove): Delete.
- (binutils_assemble): Remove first argument.
-
- * binutils-all/ar.exp: See if we're running the tests on
- a remote host, and download/upload files as appropriate.
- Replace calls to binutils_remove with remote_file. Replace
- calls to binutils_compile with target_compile. Remove initial
- argument to binutils_assemble. Use remote_load to execute
- programs on the target.
- * binutils-all/nm.exp: Ditto.
- * binutils-all/objcopy.exp: Ditto.
- * binutils-all/objdump.exp: Ditto.
- * binutils-all/size.exp: Ditto.
-
-Mon Apr 14 12:36:41 1997 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/ar.exp (long_filenames): Check for a file system
- with a 14 character file name length limit.
-
-Tue Apr 1 09:52:15 1997 Jeffrey A Law (law@cygnus.com)
-
- * binutils-all/objdump.exp: Handle d10v.
-
-Fri Feb 7 16:45:34 1997 Bob Manson <manson@charmed.cygnus.com>
-
- * binutils-all/ar.exp: Use prune_warnings instead of
- prune_system_crud.
- * binutils-all/objcopy.exp: Ditto.
-
-Wed Jan 29 00:16:43 1997 Bob Manson <manson@charmed.cygnus.com>
-
- * binutils-all/nm.exp: Use / between $srcdir and $subdir.
- * binutils-all/objcopy.exp: Ditto.
- * binutils-all/objdump.exp: Ditto.
- * binutils-all/size.exp: Ditto.
- * binutils-all/hppa/objdump.exp: Ditto.
-
-
-Wed Oct 16 22:57:59 1996 Jeffrey A Law (law@cygnus.com)
-
- * binutils-all/objdump.exp: Add mn10200 and mn10300 to expected
- cpus list.
-
-Tue Oct 1 15:06:55 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * lib/utils-lib.exp (binutil_version): Fix for current version
- printing.
-
-Sun Aug 4 22:25:40 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objcopy.exp: Fix end of line matching in srec tests
- to work with TCL 7.5.
-
-Sat Jun 29 12:51:30 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objcopy.exp: Simple copy test works for i960 b.out
- targets.
-
-Mon Jun 24 14:33:04 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objcopy.exp: On OSF/1, the simple copy test will
- succeed with gas, and fail with /bin/as, so mark it as an expected
- failure only if it fails.
-
-Tue Mar 26 16:55:08 1996 Jeffrey A Law (law@cygnus.com)
-
- * binutils-all/objcopy.exp: No longer expect adjust-section-vma
- test to fail for hppa*-*-proelf*.
-
-Mon Mar 11 08:25:14 1996 Jeffrey A Law (law@cygnus.com)
-
- * binutils-all/objdump.exp: Look for "$CODE$", not just "CODE".
-
-Wed Jan 31 11:55:13 1996 Jeffrey A Law (law@cygnus.com)
-
- * binutils-all/objcopy.exp: Expect adjust-section-vma tests to
- fail for hppa*-*-proelf* targets.
-
-Thu Jan 25 13:53:04 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objdump.exp: Update for objdump -h format change.
+ * binutils-all/ar.exp: Remove stray semicolons.
+ * binutils-all/dlltool.exp: Likewise.
* binutils-all/objcopy.exp: Likewise.
+ * binutils-all/readelf.exp: Likewise.
+ * binutils-all/windres/windres.exp: Likewise.
+ * lib/utils-lib.exp: Likewise.
-Mon Jan 15 18:14:14 1996 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objcopy.exp: Use the lma, not the vma, when testing
- address adjustments.
-
-Fri Dec 15 16:31:55 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objdump.exp: Update objdump -i test for current
- objdump output.
-
-Mon Nov 27 15:15:09 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objcopy.exp: Correct fail calls to always use the
- same string as the pass call.
-
-Wed Nov 22 13:18:58 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * lib/utils-lib.exp (prune_system_crud): Discard -g -O warnings
- from native compilers on OSF/1 and SunOS.
-
-Fri Nov 17 10:36:09 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * lib/utils-lib.exp (default_binutils_compiler: Change error
- message to say compilation rather than assembly.
-
-Wed Nov 15 18:34:42 1995 Ken Raeburn <raeburn@cygnus.com>
-
- * binutils-all/objcopy.exp: Simple copy test does appear to work
- on i*86-svr4.
-
-Wed Nov 15 12:19:28 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objcopy.exp: If assembly fails, call unresolved.
- Test running objcopy and strip on a final executable.
- * binutils-all/testprog.c: New file.
- * config/default.exp (STRIP, STRIPFLAGS): Define.
- (binutils_compile): New procedure.
- * lib/utils-lib.exp (default_binutils_compile): New procedure.
-
-Fri Nov 3 13:22:33 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * lib/utils-lib.exp (default_binutils_run): Don't use verbose
- -log, reverting part of Oct 2 change.
-
-Wed Nov 1 15:09:57 1995 Manfred Hollstein KS/EF4A 60/1F/110 #40283 <manfred@lts.sel.alcatel.de>
-
- * binutils-all/objcopy.exp: Add setup_xfails for
- m68*-motorola-sysv* and m88*-motorola-sysv*.
-
-Wed Oct 4 14:38:31 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/nm.exp: Add setup_xfails for XCOFF.
-
-Mon Oct 2 12:41:48 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/ar.exp: New file.
- * binutils-all/bintest.s: Make text_symbol and data_symbol global.
- Add new static symbols static_text_symbol and static_data_symbol.
- * binutils-all/nm.exp: Adjust accordingly.
- * config/default.exp (AR): Set if not set.
- (binutils_remove): New procedure.
- * lib/utils-lib.exp (default_binutils_run): Call
- prune_system_crud on program output. Use verbose -log instead of
- both verbose and send_log.
- (default_binutils_remove): New procedure.
-
- * lib/utils-lib.exp (default_binutils_assemble): Call
- prune_system_crud on assembler output.
-
-Tue Sep 26 14:07:05 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objcopy.exp: Add setup_xfails for simple copy test
- for i386 COFF targets.
-
-Wed Sep 13 13:20:21 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * lib/utils-lib.exp (prune_system_crud): Define if not defined.
- * binutils-all/objcopy.exp: Call prune_system_crud on cmp output.
-
-Sat Aug 19 17:38:06 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objcopy.exp: Add xfail for i*86-*-aout* for simple
- copy test.
-
-Wed Aug 16 16:52:53 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/nm.exp: Add setup_xfail for mips*-sony-bsd* for
- tests which fail on ECOFF targets.
-
- * binutils-all/objcopy.exp: Change i*86-*-linux xfail for simple
- copy test to check for i*86-*-linuxaout* instead.
-
-Tue Aug 8 17:48:37 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objcopy.exp: Add setup_xfail for a29k-*-vxworks*
- for simple copy test.
-
-Tue Jul 25 11:57:12 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objcopy.exp: Change setup_xfail for simple copy
- test from i960-*-vxworks5.1 to i960-*-vxworks*.
-
-Mon Jul 10 12:25:46 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objcopy.exp: Add setup_xfail for z8*-*-coff for
- simple copy test.
- * binutils-all/objdump.exp (cpus_expected): Add z8001 and z8002.
-
-Sun May 21 20:32:53 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * binutils-all/hppa/objdump.exp (addendbug): Handle PA ELF targets
- too.
- * binutils-all/objcopy.exp (simple copy): Don't expect PA ELF
- targets to fail.
-
-Tue Apr 4 14:52:08 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * binutils-all/hppa: Renamed from binutils-hppa.
-
-Wed Mar 29 12:02:43 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objcopy.exp: Add setup_xfail for simple copy test
- for h8500-*-hms and h8500-*-coff.
-
-Tue Mar 28 11:18:28 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objcopy.exp: Add setup_xfail for simple copy test
- for m68*-ericsson-ose and m88*-*-coff.
-
-Mon Mar 27 11:27:31 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objcopy.exp: Add setup_xfail for simple copy test
- for m68*-*-vxworks*.
-
-Fri Mar 24 11:44:25 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-hppa/objdump.exp: Correct hppa*-*-* check.
-
-Tue Mar 21 10:48:45 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * binutils-hppa/addendbug.s: New testcase.
- * binutils-hppa/objdump.exp: Run it.
-
-Mon Mar 20 11:31:05 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * lib/utils-lib.exp (default_binutils_run): Quote any dollar signs
- in progargs before passing it to exec.
-
-Fri Mar 17 16:39:31 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * config/hppa.sed: Sed script to transform bintest.s into proper
- PA assembly code.
- * binutils-all/nm.exp: Enable these tests on the PA.
- * binutils-all/objcopy.exp: Enable these tests on the PA. Expect
- simple copy to fail.
- * binutils-all/objdump.exp: Enable these tests on the PA. Handle
- "CODE" as a section name.
- * binutils-all/size.exp: Enable these tests on the PA.
- * lib/utils-lib.exp (default_binutils_assemble): For "hppa*-*-*",
- run the assembly through a sed script before passing it to the
- assembler.
-
-Wed Mar 15 16:47:13 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/objdump.exp: Force section sizes to be interpreted
- in hex. Change objdump -h failure mode to always use the same
- string.
-
-Thu Jan 5 13:01:43 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * binutils-all/nm.exp: Just check for irix4*, rather than
- irix\[0-4\]*, to avoid DejaGnu bug.
-
-Thu Dec 15 19:35:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
-
- * binutils-all/objcopy.exp: Expect simple-objcopy test to fail
- for various other targets for which gas doesn't use bfd: sh-hms,
- m68k-hpux, m68k-sunos, m68k-coff, i386-linux, a29k-udi, a29k-coff,
- i960-vxworks5.1, i960-coff, h8300-hms, h8300-coff.
-
-Wed Dec 14 15:54:46 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
-
- * binutils-all/size.exp: Skip tests requiring bintest.o on hppa,
- since it (correctly) generates syntax errors on that platform.
- * binutils-all/objdump.exp: Ditto.
- * binutils-all/nm.exp: Ditto.
- * binutils-all/objcopy.exp: Ditto. Also, move setup_xfail for
- sh-coff to branch where objcopy execution produced no error
- messages. Expect failure for hp300 also.
-
-Thu Dec 8 14:36:15 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
-
- * binutils-all/objdump.exp (cpus_expected): New variable, taken
- from objdump -i test, added ns32k and powerpc, sorted.
- (objdump -i, -f tests): Use $cpus_expected.
-
- * binutils-all/objcopy.exp: For simple-copy test, expect failure
- for sh-coff.
-
-Tue Oct 25 16:00:14 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
-
- * binutils-all/objcopy.exp: Adjust --adjust-section-vma tests for
- new S-record section handling.
-
-Tue Oct 18 11:18:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
-
- * binutils-all/nm.exp: nm with no arguments and nm -P do not work
- as expected on ECOFF targets; add calls to setup_xfail.
-
- * binutils-all/objcopy.exp: New file.
- * config/default.exp: Initialize OBJCOPY and OBJCOPYFLAGS.
-
-Fri Oct 14 14:46:22 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
-
- Rewrite testsuite.
- * configure.in, Makefile.in: Remove.
- * binutils-all/configure.in, binutils-all/Makefile.in: Remove.
- * binutils-all/bintest.c: Remove.
- * binutils-all/bintest.s: New file.
- * binutils-all/nm.exp, binutils-all/objdump.exp: Rewrite.
- * binutils-all/size.exp: Rewrite.
- * config/default.exp: Load utils-lib.exp. Set AS and ASFLAGS.
- Don't go up one directory from $base_dir. Create tmpdir.
- (binutils_run, binutils-assemble): New procedures.
- * config/unix.exp: Remove.
- * config/mt-a29k-udi, config/mt-i386-aout: Remove.
- * config/mt-i960-nindy, config/mt-lynx, config/mt-m68k: Remove.
- * config/mt-mips-ecoff, config/mt-slite: Remove.
- * config/mt-sparc-aout, config/mt-vxworks: Remove.
- * lib/utils-lib.exp (binutil_version): Don't redirect standard
- input when getting version. Don't unset errorInfo.
- (default_binutils_run): New procedure.
- (default_binutils_assemble): New procedure.
-
-Thu Sep 29 12:45:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
-
- * VMS does not permit `.' in directory names: renamed binutils.all
- to binutils-all.
- * configure.in (configdirs): Change binutils.all to binutils-all.
-
-Fri Sep 23 16:01:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
-
- * configure.in: Use mt-m68k for m68k*-*-aout* and m68k*-*-coff*,
- not for m68k-*-*.
-
-Fri Sep 23 13:54:50 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
-
- * binutils.all/objdump.exp: Added ARM to list of CPU types.
-
-Thu Sep 22 11:04:50 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
-
- * binutils.all/objdump.exp: Update for new usage message.
- * binutils.all/size.exp: Use a double backslash in the string to
- get a single backslash to the regexp matcher. Accept $TEXT$,
- $DATA$ and $BSS$ as well as .text, .data and .bss, for HP/UX.
-
-Fri Sep 2 12:53:10 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
-
- * config/unix.exp: If nm.new does not exist, use [transform nm].
- * config/default.exp: Likewise.
-
-Wed Aug 24 12:41:37 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
-
- * configure.in, binutils.all/configure.in: Change i386 to
- i[345]86.
-
-Tue Jul 19 15:23:53 1994 Bill Cox (bill@rtl.cygnus.com)
-
- * config/mt-mips-ecoff: Add -Tidp.ld option.
-
-Thu Jun 30 12:41:55 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
-
- * config/default.exp: Use nm.new, not nm, from newly built tree.
-
-Tue May 17 14:04:05 1994 Bill Cox (bill@rtl.cygnus.com)
-
- * config/default.exp, config/unix.exp: Replace error
- proc calls with perror.
-
-Tue May 10 11:20:54 1994 Stan Shebs (shebs@andros.cygnus.com)
-
- * configure.in (sparclite): Match on sparclite*-*-*.
-
-Wed Apr 13 18:25:19 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
-
- * config/unix.exp: Use nm.new, not nm, from newly built tree.
-
- * binutils.all/objdump.exp: Add more wildcards to list of
- single-letter options in pattern for usage message.
-
- * binutils.all/nm.exp: Deleted debug-symbols test, since it only
- works for a.out/stabs systems. Fixed regexps to make underscores
- optional, since some C compilers don't prepend them. Deleted
- check for foo.o symbol, since again some systems don't generate
- it.
-
-Mon Apr 11 10:31:00 1994 Bill Cox (bill@rtl.cygnus.com)
-
- * Makefile.in (check): Set TCL_LIBRARY for runtest.
-
-Mon Feb 14 19:34:03 1994 Rob Savoye (rob@darkstar.cygnus.com)
-
- * Makefile.in: Use new config features of DejaGnu in site.exp
- file. "Make check" should now work for all crosses.
-
-Fri Jan 28 18:00:29 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
-
- * binutils.all/objdump.exp: In usage message, accept
- "section-name" as well as "section_name".
-
-Mon Jan 17 16:57:02 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
-
- * binutils.all/objdump.exp: Trim list of format names expected,
- and accept any known CPU type.
-
-Thu Dec 2 20:50:24 1993 Rob Savoye (rob@darkstar.cygnus.com)
-
- * Makefile.in: Remove some stuff from the site.exp file.
- * config/unix.exp: Add global before seeing if the variables for
- nm, objdump, and size exist.
-
-Wed Nov 3 11:12:32 1993 Rob Savoye (rob@darkstar.cygnus.com)
-
- * config/udi.exp,unix.exp: Transform tool name.
- * binutils.all/*.exp: Clear errorInfo after exec.
-
-Fri Jul 2 12:41:20 1993 Ian Lance Taylor (ian@cygnus.com)
-
- * binutils.all/*.exp: Use -- for long arguments rather than +.
-
-Fri Jun 4 10:52:29 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
-
- * configure.in: change srctrigger to Makefile.in
-
-Wed May 26 17:27:46 1993 Ian Lance Taylor (ian@cygnus.com)
-
- * Makefile.in (FLAGS_TO_PASS): Pass down CC and CFLAGS.
-
-Fri May 7 13:58:44 1993 Ian Lance Taylor (ian@cygnus.com)
-
- * binutils.all/objdump.exp: Update for new usage message.
-
-Mon Apr 19 14:08:52 1993 Rob Savoye (rob@darkstar.cygnus.com)
+2004-04-14 Richard Sandiford <rsandifo@redhat.com>
- * binutils.all/*.exp: Use the new util_test proc.
- * Makefile.in: Create a local site.exp file with config info.
+ * binutils-all/readelf.ss-mips: Allow named section symbols.
-Thu Mar 25 05:38:47 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
+2004-03-30 Jakub Jelinek <jakub@redhat.com>
- * nm.all/configure.in (srcname): Delete extra quote.
+ * binutils-all/objcopy.exp: Accept main as a data symbol as well.
-Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com)
+2004-02-27 Andreas Schwab <schwab@suse.de>
- * binutils/testsuite: made modifications to testcases, etc., to allow
- them to work properly given the reorganization of deja-gnu and the
- relocation of the testcases from deja-gnu to a "tool" subdirectory.
+ * binutils-all/ar.exp (argument_parsing): New test.
-Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com)
+2004-02-20 Nathan Sidwell <nathan@codesourcery.com>
- * binutils/testsuite: Initial creation of binutils/testsuite.
- Migrated dejagnu testcases and support files for testing nm to
- binutils/testsuite from deja-gnu. These files were moved "as is"
- with no modifications. This migration is part of a major overhaul
- of dejagnu. The modifications to these testcases, etc., which
- will allow them to work with the new version of dejagnu will be
- made in a future update.
+ * binutils-all/objcopy.exp: Reorder arguments for POSIXLY_CORRECT
+ systems.
+For older changes see ChangeLog-9303
+\f
+Local Variables:
+mode: change-log
+left-margin: 8
+fill-column: 74
+version-control: never
+End: