-# Copyright (C) 1994, 95, 96, 97, 1998 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
}
if ![is_remote host] {
- set tempfile tmpdir/bintest.o;
- set copyfile tmpdir/copy;
+ set tempfile tmpdir/bintest.o
+ set copyfile tmpdir/copy
} else {
set tempfile [remote_download host tmpdir/bintest.o]
set copyfile copy
if [is_remote host] {
set src1 tmpdir/bintest.o
set src2 tmpdir/copy.o
- remote_upload host $tempfile $src1;
- remote_upload host ${copyfile}.o $src2;
+ remote_upload host $tempfile $src1
+ remote_upload host ${copyfile}.o $src2
} else {
set src1 ${tempfile}
set src2 ${copyfile}.o
}
- set status [remote_exec build cmp "${src1} ${src2}"];
- set exec_output [lindex $status 1];
+ set status [remote_exec build cmp "${src1} ${src2}"]
+ set exec_output [lindex $status 1]
set exec_output [prune_warnings $exec_output]
# On some systems the result of objcopy will not be identical.
# in the first place, and may order things a little differently.
# Those systems should use setup_xfail here.
- setup_xfail "sh-*-coff" "sh-*-hms"
- setup_xfail "m68*-*-hpux*" "m68*-*-sunos*" "m68*-*-coff" "m68*-*-vxworks*"
- setup_xfail "m68*-ericsson-ose" "m68k*-motorola-sysv*"
- setup_xfail "i*86-*-linuxaout*" "i*86-*-aout*"
- setup_xfail "i*86-*-sysv3" "i*86-*-isc*" "i*86-*-sco*" "i*86-*-coff"
- setup_xfail "i*86-*-aix*" "i*86-*-go32*" "i*86-*-msdos*"
- setup_xfail "a29k-*-udi" "a29k-*-coff" "a29k-*-vxworks*"
- setup_xfail "i960-*-coff"
- setup_xfail "h8300-*-hms" "h8300-*-coff"
- setup_xfail "h8500-*-hms" "h8500-*-coff"
+ setup_xfail "a29k-*"
+ setup_xfail "h8300-*-rtems*" "h8300-*-coff"
+ setup_xfail "h8500-*-rtems*" "h8500-*-coff"
setup_xfail "hppa*-*-*"
- clear_xfail "hppa*-*-*elf*" "hppa*-*-linux*"
- setup_xfail "m88*-*-coff" "m88*-motorola-sysv*"
- setup_xfail "z8*-*-coff"
+ setup_xfail "i960-*"
+ setup_xfail "m68*-*-*coff" "m68*-*-hpux*" "m68*-*-lynxos*"
+ setup_xfail "m68*-*-sysv*" "m68*-apple-aux*"
+ setup_xfail "m8*-*"
+ setup_xfail "or32-*-rtems*" "or32-*-coff"
+ setup_xfail "sh-*-coff*" "sh-*-rtems*"
+ setup_xfail "tic4x-*-*" "tic80-*-*" "w65-*" "z8*-*"
+
+ clear_xfail "hppa*64*-*-hpux*" "hppa*-*-linux*" "hppa*-*-lites*"
+ clear_xfail "hppa*-*-*n*bsd*" "hppa*-*-rtems*" "*-*-*elf*" "m68*-*-sysv4*"
if [string match "" $exec_output] then {
pass "objcopy (simple copy)"
fail "objcopy -O srec"
} else {
if [is_remote host] {
- remote_upload host ${srecfile} tmpdir/copy.srec;
- set srecfile tmpdir/copy.srec;
+ remote_upload host ${srecfile} tmpdir/copy.srec
+ set srecfile tmpdir/copy.srec
}
set file [open ${srecfile} r]
perror "objdump can not recognize bintest.o"
set origstart ""
} else {
- set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -O srec $tempfile ${copyfile}.srec --set-start 0x7654"]
+ set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -O srec --set-start 0x7654 $tempfile ${copyfile}.srec"]
if ![string match "" $got] then {
fail "objcopy --set-start"
} else {
}
}
- set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -O srec $tempfile ${copyfile}.srec --adjust-start 0x123"]
+ set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -O srec --adjust-start 0x123 $tempfile ${copyfile}.srec"]
if ![string match "" $got] then {
fail "objcopy --adjust-start"
} else {
if {$low == "" || $origstart == ""} then {
perror "objdump can not recognize bintest.o"
} else {
- set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -O srec $tempfile ${copyfile}.srec --adjust-vma 0x123"]
+ set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -O srec --adjust-vma 0x123 $tempfile ${copyfile}.srec"]
if ![string match "" $got] then {
fail "objcopy --adjust-vma"
} else {
set got $rest
}
- set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -O srec $tempfile ${copyfile}.srec $arg"]
+ set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -O srec $arg $tempfile ${copyfile}.srec"]
if ![string match "" $got] then {
fail "objcopy --adjust-section-vma +"
} else {
}
regsub -all "\\+4" $arg "=[expr $low + 4]" argeq
- set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -O srec $tempfile ${copyfile}.srec $argeq"]
+ set got [binutils_run $OBJCOPY "$OBJCOPYFLAGS -O srec $argeq $tempfile ${copyfile}.srec"]
if ![string match "" $got] then {
fail "objcopy --adjust-section-vma ="
} else {
# Test stripping an object.
proc strip_test { } {
+ global AR
global CC
global STRIP
global STRIPFLAGS
}
if [is_remote host] {
- set objfile [remote_download host tmpdir/testprog.o];
+ set archive libstrip.a
+ set objfile [remote_download host tmpdir/testprog.o]
+ remote_file host delete $archive
+ } else {
+ set archive tmpdir/libstrip.a
+ set objfile tmpdir/testprog.o
+ }
+
+ remote_file build delete tmpdir/libstrip.a
+
+ set exec_output [binutils_run $AR "rc $archive ${objfile}"]
+ if ![string match "" $exec_output] {
+ fail $test
+ return
+ }
+
+ set exec_output [binutils_run $STRIP "$STRIPFLAGS $archive"]
+ if ![string match "" $exec_output] {
+ fail $test
+ return
+ }
+
+ if { [target_compile $srcdir/$subdir/testprog.c tmpdir/testprog.o object debug] != "" } {
+ untested $test
+ return
+ }
+
+ if [is_remote host] {
+ set objfile [remote_download host tmpdir/testprog.o]
} else {
set objfile tmpdir/testprog.o
}
}
if [is_remote host] {
- set objfile [remote_download host tmpdir/testprog.o];
+ set objfile [remote_download host tmpdir/testprog.o]
} else {
set objfile tmpdir/testprog.o
}
}
set exec_output [binutils_run $NM "$NMFLAGS $objfile"]
- if {![regexp {^([0-9a-fA-F]+)?[ ]+T main} $exec_output] \
+ if {![regexp {^([0-9a-fA-F]+)?[ ]+[TD] main} $exec_output] \
&& ![regexp {^([0-9a-fA-F]+)?[ ]+T _main} $exec_output]} {
fail $test
return
# Build a final executable.
+if { [istarget *-*-cygwin] || [istarget *-*-mingw32] } {
+ set test_prog "testprog.exe"
+} else {
+ set test_prog "testprog"
+}
+
proc copy_setup { } {
global srcdir
global subdir
+ global gcc_gas_flag
+ global test_prog
- set res [build_wrapper testglue.o];
- set flags { debug };
+ set res [build_wrapper testglue.o]
+ set flags { debug }
if { $res != "" } {
- lappend flags "additional_flags=[lindex $res 1]";
- set add_libs "testglue.o";
+ lappend flags "additional_flags=[lindex $res 1]"
+ set add_libs "testglue.o"
} else {
- set add_libs "";
+ set add_libs ""
}
- if { [target_compile "$srcdir/$subdir/testprog.c $add_libs" tmpdir/testprog executable $flags] != "" } {
+ if { [istarget *-*-linux*] } {
+ foreach i $gcc_gas_flag {
+ set flags "additional_flags=$i $flags"
+ }
+ }
+ if { [target_compile "$srcdir/$subdir/testprog.c $add_libs" tmpdir/$test_prog executable $flags] != "" } {
return 2
}
- set result [remote_load target tmpdir/testprog];
- set status [lindex $result 0];
+ set result [remote_load target tmpdir/$test_prog]
+ set status [lindex $result 0]
if { $status != "pass" } {
perror "unresolved setup, status = $status"
# Test copying an executable.
proc copy_executable { prog flags test1 test2 } {
+ global test_prog
if [is_remote host] {
- set testfile [remote_download host tmpdir/testprog];
+ set testfile [remote_download host tmpdir/$test_prog]
set testcopy copyprog
} else {
- set testfile tmpdir/testprog
+ set testfile tmpdir/$test_prog
set testcopy tmpdir/copyprog
}
- remote_file host delete $testcopy;
+ remote_file host delete $testcopy
set exec_output [binutils_run $prog "$flags $testfile $testcopy"]
remote_upload host $testcopy tmpdir/copyprog
}
- set status [remote_exec build "cmp" "tmpdir/testprog tmpdir/copyprog"]
- set exec_output [lindex $status 1];
+ set status [remote_exec build "cmp" "tmpdir/$test_prog tmpdir/copyprog"]
+ set exec_output [lindex $status 1]
if [string match "" $exec_output] then {
pass $test1
# mips_elf_sym_is_global.
setup_xfail "mips*-*-elf"
- setup_xfail "arm*-*-coff"
+ setup_xfail "*arm*-*-coff"
+ setup_xfail "xscale-*-coff"
setup_xfail "arm*-*-pe"
setup_xfail "thumb*-*-coff"
setup_xfail "thumb*-*-pe"
}
set output [remote_load target tmpdir/copyprog]
- set status [lindex $output 0];
+ set status [lindex $output 0]
if { $status != "pass" } {
fail $test2
} else {
remote_download build tmpdir/copyprog tmpdir/striprog
if [is_remote host] {
- set copyfile [remote_download host tmpdir/striprog];
+ set copyfile [remote_download host tmpdir/striprog]
} else {
set copyfile tmpdir/striprog
}
}
if [is_remote host] {
- remote_upload host ${copyfile} tmpdir/striprog;
+ remote_upload host ${copyfile} tmpdir/striprog
}
set result [remote_load target tmpdir/striprog]
- set status [lindex $result 0];
+ set status [lindex $result 0]
if { $status != "pass" } {
fail $test
return
remote_download build tmpdir/copyprog tmpdir/striprog
if [is_remote host] {
- set copyfile [remote_download host tmpdir/striprog];
+ set copyfile [remote_download host tmpdir/striprog]
} else {
set copyfile tmpdir/striprog
}
}
if [is_remote host] {
- remote_upload host ${copyfile} tmpdir/striprog;
+ remote_upload host ${copyfile} tmpdir/striprog
}
set result [remote_load target tmpdir/striprog]
- set status [lindex $result 0];
+ set status [lindex $result 0]
if { $status != "pass" } {
fail $test
return
}
set exec_output [binutils_run $NM "$NMFLAGS ${copyfile}"]
- if {![regexp {^[0-9a-fA-F]+ T main} $exec_output] \
- && ![regexp {^[0-9a-fA-F]+ T _main} $exec_output]} {
+ if { [istarget mmix-knuth-mmixware] } {
+ # Whenever there's a symbol in the mmo format, there's the symbol
+ # Main, so remove it manually from the expected output for sake of
+ # this test.
+
+ # Using "" not {} to get the \n and \r translated.
+ regsub "^\[0-9a-fA-F\]+\[ \]+T Main\[\n\r\]+" $exec_output "" exec_output
+ }
+
+ if {![regexp {^([0-9a-fA-F]+)?[ ]+[TD] main} $exec_output] \
+ && ![regexp {^([0-9a-fA-F]+)?[ ]+[TD] _main} $exec_output]} {
fail $test
return
}