ac_subst_vars='LTLIBOBJS
LIBOBJS
compare_exclusions
-POSTSTAGE1_CONFIGURE_FLAGS
+host_shared
stage2_werror_flag
stage1_checking
stage1_cflags
READELF_FOR_TARGET
RANLIB_FOR_TARGET
OBJDUMP_FOR_TARGET
+OBJCOPY_FOR_TARGET
NM_FOR_TARGET
LIPO_FOR_TARGET
LD_FOR_TARGET
AR_FOR_TARGET
GOC_FOR_TARGET
GFORTRAN_FOR_TARGET
-GCJ_FOR_TARGET
GCC_FOR_TARGET
CXX_FOR_TARGET
CC_FOR_TARGET
LDFLAGS_FOR_BUILD
GOC_FOR_BUILD
GFORTRAN_FOR_BUILD
-GCJ_FOR_BUILD
DLLTOOL_FOR_BUILD
CXX_FOR_BUILD
CXXFLAGS_FOR_BUILD
CFLAGS_FOR_TARGET
DEBUG_PREFIX_CFLAGS_FOR_TARGET
SYSROOT_CFLAGS_FOR_TARGET
-stage1_languages
+extra_host_zlib_configure_flags
extra_host_libiberty_configure_flags
-clooginc
-clooglibs
-pplinc
-ppllibs
+stage1_languages
+extra_linker_plugin_flags
+extra_linker_plugin_configure_flags
+islinc
+isllibs
+islver
poststage1_ldflags
poststage1_libs
-stage1_libs
stage1_ldflags
+stage1_libs
+extra_isl_gmp_configure_flags
extra_mpc_mpfr_configure_flags
extra_mpc_gmp_configure_flags
extra_mpfr_configure_flags
LDFLAGS
CFLAGS
CC
-EXTRA_CONFIGARGS_LIBJAVA
+extra_liboffloadmic_configure_flags
target_subdir
host_subdir
build_subdir
ac_user_opts='
enable_option_checking
with_build_libsubdir
+with_system_zlib
+enable_as_accelerator_for
+enable_offload_targets
enable_gold
enable_ld
+enable_compressed_debug_sections
enable_libquadmath
enable_libquadmath_support
enable_libada
enable_libssp
-enable_static_libjava
+enable_libstdcxx
+enable_liboffloadmic
enable_bootstrap
-enable_build_with_cxx
-enable_build_poststage1_with_cxx
with_mpc
with_mpc_include
with_mpc_lib
with_gmp
with_gmp_include
with_gmp_lib
-with_host_libstdcxx
-with_stage1_ldflags
with_stage1_libs
+with_stage1_ldflags
with_boot_libs
with_boot_ldflags
-with_ppl
-with_ppl_include
-with_ppl_lib
-enable_ppl_version_check
-with_cloog
-with_cloog_include
-with_cloog_lib
-enable_cloog_backend
-enable_cloog_version_check
+with_isl
+with_isl_include
+with_isl_lib
+enable_isl_version_check
enable_lto
+enable_linker_plugin_configure_flags
+enable_linker_plugin_flags
enable_stage1_languages
enable_objc_gc
+with_target_bdw_gc
+with_target_bdw_gc_include
+with_target_bdw_gc_lib
with_build_sysroot
with_debug_prefix_map
with_build_config
+enable_vtable_verify
enable_serial_configure
with_build_time_tools
enable_maintainer_mode
enable_stage1_checking
enable_werror
+enable_host_shared
'
ac_precious_vars='build_alias
host_alias
CC_FOR_TARGET
CXX_FOR_TARGET
GCC_FOR_TARGET
-GCJ_FOR_TARGET
GFORTRAN_FOR_TARGET
GOC_FOR_TARGET
AR_FOR_TARGET
LD_FOR_TARGET
LIPO_FOR_TARGET
NM_FOR_TARGET
+OBJCOPY_FOR_TARGET
OBJDUMP_FOR_TARGET
RANLIB_FOR_TARGET
READELF_FOR_TARGET
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-as-accelerator-for=ARG
+ build as offload target compiler. Specify offload
+ host triple by ARG
+ --enable-offload-targets=LIST
+ enable offloading to devices from comma-separated
+ LIST of TARGET[=DIR]. Use optional path to find
+ offload target compiler during the build
--enable-gold[=ARG] build gold [ARG={default,yes,no}]
--enable-ld[=ARG] build ld [ARG={default,yes,no}]
+ --enable-compressed-debug-sections={all,gas,gold,ld,none}
+ Enable compressed debug sections for gas, gold or ld
+ by default
--disable-libquadmath do not build libquadmath directory
--disable-libquadmath-support
disable libquadmath support for Fortran
--enable-libada build libada directory
--enable-libssp build libssp directory
- --enable-static-libjava[=ARG]
- build static libjava [default=no]
+ --disable-libstdcxx do not build libstdc++-v3 directory
+ --enable-liboffloadmic=ARG
+ build liboffloadmic [ARG={no,host,target}]
--enable-bootstrap enable bootstrapping [yes if native build]
- --enable-build-with-cxx build with C++ compiler instead of C compiler
- --enable-build-poststage1-with-cxx
- build stages 2 and 3 with C++, not C
- --disable-ppl-version-check
- disable check for PPL version
- --enable-cloog-backend[=BACKEND]
- set the CLooG BACKEND used to either isl, ppl or
- ppl-legacy (default)
- --disable-cloog-version-check
- disable check for CLooG version
+ --disable-isl-version-check
+ disable check for isl version
--enable-lto enable link time optimization support
+ --enable-linker-plugin-configure-flags=FLAGS
+ additional flags for configuring linker plugins
+ [none]
+ --enable-linker-plugin-flags=FLAGS
+ additional flags for configuring and building linker
+ plugins [none]
--enable-stage1-languages[=all]
choose additional languages to build during stage1.
Mostly useful for compiler development
--enable-objc-gc enable use of Boehm's garbage collector with the GNU
Objective-C runtime
+ --enable-vtable-verify Enable vtable verification feature
--enable-serial-[{host,target,build}-]configure
force sequential configuration of sub-packages for
the host, target or build machine, or all
choose additional checking for stage1 of the
compiler
--enable-werror enable -Werror in bootstrap stage2 and later
+ --enable-host-shared build host code as shared libraries
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-build-libsubdir=DIR Directory where to find libraries for build system
+ --with-system-zlib use installed libz
--with-mpc=PATH specify prefix directory for installed MPC package.
Equivalent to --with-mpc-include=PATH/include plus
--with-mpc-lib=PATH/lib
--with-gmp-lib=PATH/lib
--with-gmp-include=PATH specify directory for installed GMP include files
--with-gmp-lib=PATH specify directory for the installed GMP library
- --with-host-libstdcxx=L use linker arguments L to link with libstdc++ when
- linking with PPL
+ --with-stage1-libs=LIBS libraries for stage1
--with-stage1-ldflags=FLAGS
linker flags for stage1
- --with-stage1-libs=LIBS libraries for stage1
--with-boot-libs=LIBS libraries for stage2 and later
--with-boot-ldflags=FLAGS
linker flags for stage2 and later
- --with-ppl=PATH specify prefix directory for the installed PPL
+ --with-isl=PATH Specify prefix directory for the installed isl
package. Equivalent to
- --with-ppl-include=PATH/include plus
- --with-ppl-lib=PATH/lib
- --with-ppl-include=PATH specify directory for installed PPL include files
- --with-ppl-lib=PATH specify directory for the installed PPL library
- --with-cloog=PATH Specify prefix directory for the installed CLooG-PPL
+ --with-isl-include=PATH/include plus
+ --with-isl-lib=PATH/lib
+ --with-isl-include=PATH Specify directory for installed isl include files
+ --with-isl-lib=PATH Specify the directory for the installed isl library
+ --with-target-bdw-gc=PATHLIST
+ specify prefix directory for installed bdw-gc
package. Equivalent to
- --with-cloog-include=PATH/include plus
- --with-cloog-lib=PATH/lib
- --with-cloog-include=PATH
- Specify directory for installed CLooG include files
- --with-cloog-lib=PATH Specify the directory for the installed CLooG
- library
+ --with-target-bdw-gc-include=PATH/include plus
+ --with-target-bdw-gc-lib=PATH/lib
+ --with-target-bdw-gc-include=PATHLIST
+ specify directories for installed bdw-gc include
+ files
+ --with-target-bdw-gc-lib=PATHLIST
+ specify directories for installed bdw-gc library
--with-build-sysroot=SYSROOT
use sysroot as the system root during the build
--with-debug-prefix-map='A=B C=D ...'
CXX for the target
GCC_FOR_TARGET
GCC for the target
- GCJ_FOR_TARGET
- GCJ for the target
GFORTRAN_FOR_TARGET
GFORTRAN for the target
GOC_FOR_TARGET
LIPO for the target
NM_FOR_TARGET
NM for the target
+ OBJCOPY_FOR_TARGET
+ OBJCOPY for the target
OBJDUMP_FOR_TARGET
OBJDUMP for the target
RANLIB_FOR_TARGET
} # ac_fn_cxx_try_compile
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_cxx_try_link
+
# ac_fn_c_try_link LINENO
# -----------------------
# Try to link conftest.$ac_ext, and return whether this succeeded.
# these library is used by various programs built for the build
# environment
#
-build_libs="build-libiberty"
+build_libs="build-libiberty build-libcpp"
# these tools are built for the build environment
build_tools="build-texinfo build-flex build-bison build-m4 build-fixincludes"
# these libraries are used by various programs built for the host environment
-#
-host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
+#f
+host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libdecnumber gmp mpfr mpc isl libelf libiconv"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
# If --enable-gold is used, "gold" may replace "ld".
-host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools"
-
-# libgcj represents the runtime libraries only used by gcj.
-libgcj="target-libffi \
- target-zlib \
- target-libjava"
+host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1 gotools"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
# Note that libiberty is not a target library.
target_libraries="target-libgcc \
+ target-libbacktrace \
target-libgloss \
target-newlib \
target-libgomp \
+ target-libcilkrts \
+ target-liboffloadmic \
+ target-libatomic \
target-libitm \
target-libstdc++-v3 \
- target-libmudflap \
+ target-libsanitizer \
+ target-libvtv \
+ target-libmpx \
target-libssp \
target-libquadmath \
target-libgfortran \
- target-boehm-gc \
- ${libgcj} \
+ target-libffi \
target-libobjc \
target-libada \
target-libgo"
fi
use_included_zlib=
+
+# Check whether --with-system-zlib was given.
+if test "${with_system_zlib+set}" = set; then :
+ withval=$with_system_zlib;
+fi
+
# Make sure we don't let ZLIB be added if we didn't want it.
if test x$with_system_zlib = xyes ; then
use_included_zlib=no
yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
esac
+# Check whether --enable-as-accelerator-for was given.
+if test "${enable_as_accelerator_for+set}" = set; then :
+ enableval=$enable_as_accelerator_for;
+fi
+
+
+# Check whether --enable-offload-targets was given.
+if test "${enable_offload_targets+set}" = set; then :
+ enableval=$enable_offload_targets;
+ if test x"$enable_offload_targets" = x; then
+ as_fn_error "no offload targets specified" "$LINENO" 5
+ fi
+
+else
+ enable_offload_targets=
+fi
+
+
# Handle --enable-gold, --enable-ld.
# --disable-gold [--enable-ld]
# Build only ld. Default option.
is_elf=no
case "${target}" in
*-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
- | *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
+ | *-*-linux* | *-*-gnu* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
| *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
- | *-*-solaris2* | *-*-nto*)
+ | *-*-solaris2* | *-*-nto* | *-*-nacl* | *-*-fuchsia*)
case "${target}" in
*-*-linux*aout* | *-*-linux*oldld*)
;;
if test "$is_elf" = "yes"; then
# Check for target supported by gold.
case "${target}" in
- i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*)
+ i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-* \
+ | aarch64*-*-* | tilegx*-*-* | mips*-*-* | s390*-*-*)
configdirs="$configdirs gold"
if test x${ENABLE_GOLD} = xdefault; then
default_ld=gold
;;
esac
+# PR gas/19109
+# Decide the default method for compressing debug sections.
+# Provide a configure time option to override our default.
+# Check whether --enable-compressed_debug_sections was given.
+if test "${enable_compressed_debug_sections+set}" = set; then :
+ enableval=$enable_compressed_debug_sections;
+ if test x"$enable_compressed_debug_sections" = xyes; then
+ as_fn_error "no program with compressed debug sections specified" "$LINENO" 5
+ fi
+
+else
+ enable_compressed_debug_sections=
+fi
+
+
# Configure extra directories which are host specific
case "${host}" in
fi
-# Save it here so that, even in case of --enable-libgcj, if the Java
-# front-end isn't enabled, we still get libgcj disabled.
-libgcj_saved=$libgcj
-case $enable_libgcj in
-yes)
- # If we reset it here, it won't get added to noconfigdirs in the
- # target-specific build rules, so it will be forcibly enabled
- # (unless the Java language itself isn't enabled).
- libgcj=
- ;;
-no)
- # Make sure we get it printed in the list of not supported target libs.
- # Don't disable libffi, though, other languages use it.
- noconfigdirs="$noconfigdirs `echo ${libgcj} | sed -e 's/target-libffi//'`"
- # Clear libgcj_saved so that even if java is enabled libffi won't be
- # built.
- libgcj_saved=
- ;;
-esac
-
-# Check whether --enable-static-libjava was given.
-if test "${enable_static_libjava+set}" = set; then :
- enableval=$enable_static_libjava; ENABLE_STATIC_LIBJAVA=$enableval
+# Check whether --enable-libstdcxx was given.
+if test "${enable_libstdcxx+set}" = set; then :
+ enableval=$enable_libstdcxx; ENABLE_LIBSTDCXX=$enableval
else
- ENABLE_STATIC_LIBJAVA=no
-fi
-
-enable_static_libjava=
-if test "${ENABLE_STATIC_LIBJAVA}" = "yes" ; then
- enable_static_libjava=yes
+ ENABLE_LIBSTDCXX=default
fi
-if test x$enable_static_libjava != xyes ; then
- EXTRA_CONFIGARGS_LIBJAVA=--disable-static
+if test "${ENABLE_LIBSTDCXX}" = "no" ; then
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
fi
-
-# Disable libmudflap on some systems.
-if test x$enable_libmudflap = x ; then
- case "${target}" in
- *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | bfin*-*-uclinux* | *-*-kopensolaris*-gnu)
- # Enable libmudflap by default in GNU and friends.
- ;;
- *-*-freebsd*)
- # Enable libmudflap by default in FreeBSD.
- ;;
+# If this is accelerator compiler and its target is intelmic we enable
+# target liboffloadmic by default. If this is compiler with offloading
+# for intelmic we enable host liboffloadmic by default. Otherwise
+# liboffloadmic is disabled by default.
+# Check whether --enable-liboffloadmic was given.
+if test "${enable_liboffloadmic+set}" = set; then :
+ enableval=$enable_liboffloadmic; case "$enableval" in
+ no | host | target)
+ enable_liboffloadmic=$enableval ;;
+ *)
+ as_fn_error "--enable-liboffloadmic=no/host/target" "$LINENO" 5 ;;
+esac
+else
+ if test x"$enable_as_accelerator_for" != x; then
+ case "${target}" in
+ *-intelmic-* | *-intelmicemul-*)
+ enable_liboffloadmic=target
+ extra_liboffloadmic_configure_flags="--enable-liboffloadmic=target"
+ ;;
*)
- # Disable it by default everywhere else.
- noconfigdirs="$noconfigdirs target-libmudflap"
- ;;
+ enable_liboffloadmic=no
+ ;;
+ esac
+else
+ case "${enable_offload_targets}" in
+ *-intelmic-* | *-intelmicemul-*)
+ enable_liboffloadmic=host
+ extra_liboffloadmic_configure_flags="--enable-liboffloadmic=host"
+ ;;
+ *)
+ enable_liboffloadmic=no
+ ;;
esac
fi
+fi
+
-# Disable libgomp on non POSIX hosted systems.
+
+# Enable libgomp by default on hosted POSIX systems, and a few others.
if test x$enable_libgomp = x ; then
- # Enable libgomp by default on hosted POSIX systems.
case "${target}" in
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
;;
*-*-netbsd* | *-*-freebsd* | *-*-openbsd* | *-*-dragonfly*)
;;
- *-*-solaris2* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
+ *-*-solaris2* | *-*-hpux11*)
;;
*-*-darwin* | *-*-aix*)
;;
+ nvptx*-*-*)
+ ;;
*)
noconfigdirs="$noconfigdirs target-libgomp"
;;
esac
fi
+# Disable libatomic on unsupported systems.
+if test -d ${srcdir}/libatomic; then
+ if test x$enable_libatomic = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libatomic support" >&5
+$as_echo_n "checking for libatomic support... " >&6; }
+ if (srcdir=${srcdir}/libatomic; \
+ . ${srcdir}/configure.tgt; \
+ test -n "$UNSUPPORTED")
+ then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ noconfigdirs="$noconfigdirs target-libatomic"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ fi
+ fi
+fi
+
+# Disable libcilkrts on unsupported systems.
+if test -d ${srcdir}/libcilkrts; then
+ if test x$enable_libcilkrts = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libcilkrts support" >&5
+$as_echo_n "checking for libcilkrts support... " >&6; }
+ if (srcdir=${srcdir}/libcilkrts; \
+ . ${srcdir}/configure.tgt; \
+ test -n "$UNSUPPORTED")
+ then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ noconfigdirs="$noconfigdirs target-libcilkrts"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ fi
+ fi
+fi
+
+# Disable liboffloadmic on unsupported systems.
+if test -d ${srcdir}/liboffloadmic; then
+ if test x$enable_liboffloadmic != xno; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for liboffloadmic support" >&5
+$as_echo_n "checking for liboffloadmic support... " >&6; }
+ if (srcdir=${srcdir}/liboffloadmic; \
+ . ${srcdir}/configure.tgt; \
+ test -n "$UNSUPPORTED")
+ then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ noconfigdirs="$noconfigdirs target-liboffloadmic"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ fi
+ fi
+fi
+
# Disable libitm on unsupported systems.
if test -d ${srcdir}/libitm; then
if test x$enable_libitm = x; then
fi
fi
+# Disable libsanitizer on unsupported systems.
+if test -d ${srcdir}/libsanitizer; then
+ if test x$enable_libsanitizer = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libsanitizer support" >&5
+$as_echo_n "checking for libsanitizer support... " >&6; }
+ if (srcdir=${srcdir}/libsanitizer; \
+ . ${srcdir}/configure.tgt; \
+ test -n "$UNSUPPORTED")
+ then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ noconfigdirs="$noconfigdirs target-libsanitizer"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ fi
+ fi
+fi
+
+# Disable libvtv on unsupported systems.
+if test -d ${srcdir}/libvtv; then
+ if test x$enable_libvtv = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libvtv support" >&5
+$as_echo_n "checking for libvtv support... " >&6; }
+ if (srcdir=${srcdir}/libvtv; \
+ . ${srcdir}/configure.tgt; \
+ test "$VTV_SUPPORTED" != "yes")
+ then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ noconfigdirs="$noconfigdirs target-libvtv"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ fi
+ fi
+fi
+
+
+# Enable libmpx on supported systems by request.
+if test -d ${srcdir}/libmpx; then
+ if test x$enable_libmpx = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libmpx support" >&5
+$as_echo_n "checking for libmpx support... " >&6; }
+ if (srcdir=${srcdir}/libmpx; \
+ . ${srcdir}/configure.tgt; \
+ test "$LIBMPX_SUPPORTED" != "yes")
+ then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ noconfigdirs="$noconfigdirs target-libmpx"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ fi
+ fi
+fi
+
+
+
+# Disable libquadmath for some systems.
+case "${target}" in
+ avr-*-*)
+ noconfigdirs="$noconfigdirs target-libquadmath"
+ ;;
+ # libquadmath is unused on AIX and libquadmath build process use of
+ # LD_LIBRARY_PATH can break AIX bootstrap.
+ powerpc-*-aix* | rs6000-*-aix*)
+ noconfigdirs="$noconfigdirs target-libquadmath"
+ ;;
+esac
+
# Disable libssp for some systems.
case "${target}" in
avr-*-*)
noconfigdirs="$noconfigdirs target-libssp"
;;
rl78-*-*)
- # Dereferencing -1 is a compile-time error
+ # libssp uses a misaligned load to trigger a fault, but the RL78
+ # doesn't fault for those - instead, it gives a build-time error
+ # for explicit misaligned loads.
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
+ visium-*-*)
+ # No hosted I/O support.
noconfigdirs="$noconfigdirs target-libssp"
;;
esac
# Disable libstdc++-v3 for some systems.
-case "${target}" in
- *-*-vxworks*)
- # VxWorks uses the Dinkumware C++ library.
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
- ;;
- arm*-wince-pe*)
- # the C++ libraries don't build on top of CE's C libraries
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
- ;;
- avr-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
- ;;
-esac
+# Allow user to override this if they pass --enable-libstdc++-v3
+if test "${ENABLE_LIBSTDCXX}" = "default" ; then
+ case "${target}" in
+ *-*-vxworks*)
+ # VxWorks uses the Dinkumware C++ library.
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ arm*-wince-pe*)
+ # the C++ libraries don't build on top of CE's C libraries
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ avr-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ ft32-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ esac
+fi
# Disable Fortran for some systems.
case "${target}" in
;;
esac
-# Disable Java if libffi is not supported.
-case "${target}" in
- alpha*-*-*)
- ;;
- arm*-*-*)
- ;;
- cris-*-*)
- ;;
- frv-*-*)
- ;;
- hppa*-*-linux*)
- ;;
- hppa*-*-hpux*)
- ;;
- i?86-*-*)
- ;;
- ia64*-*-*)
- ;;
- m32r*-*-*)
- ;;
- m68k-*-*)
- ;;
- mips-sgi-irix6.* | mips*-*-rtems*)
- ;;
- mips*-*-linux*)
- ;;
- powerpc*-*-linux*)
- ;;
- powerpc-*-darwin*)
- ;;
- powerpc-*-aix* | rs6000-*-aix*)
- ;;
- powerpc-*-freebsd*)
- ;;
- powerpc64-*-freebsd*)
- ;;
- powerpc*-*-rtems*)
- ;;
- s390-*-* | s390x-*-*)
- ;;
- sh-*-* | sh[34]*-*-*)
- ;;
- sh64-*-* | sh5*-*-*)
- ;;
- sparc*-*-*)
- ;;
- x86_64-*-*)
- ;;
- *-*-*)
- unsupported_languages="$unsupported_languages java"
- ;;
-esac
-
-# Disable Java, libgcj or related libraries for some systems.
+# Disable libffi for some systems.
case "${target}" in
powerpc-*-darwin*)
;;
x86_64-*-darwin[912]*)
;;
*-*-darwin*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
*-*-netware*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
+ ;;
+ *-*-phoenix*)
+ noconfigdirs="$noconfigdirs target-libffi"
;;
*-*-rtems*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
*-*-tpf*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
*-*-uclinux*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
*-*-vxworks*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
+ ;;
+ aarch64*-*-freebsd*)
+ noconfigdirs="$noconfigdirs target-libffi"
;;
alpha*-*-*vms*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
+ ;;
+ arm*-*-freebsd*)
+ noconfigdirs="$noconfigdirs target-libffi"
;;
arm-wince-pe)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
arm*-*-symbianelf*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- bfin-*-*)
- noconfigdirs="$noconfigdirs target-boehm-gc"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
cris-*-* | crisv32-*-*)
- unsupported_languages="$unsupported_languages java"
case "${target}" in
*-*-linux*)
;;
*) # See PR46792 regarding target-libffi.
- noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
+ noconfigdirs="$noconfigdirs target-libffi";;
esac
;;
- hppa*64*-*-linux*)
- # In this case, it's because the hppa64-linux target is for
- # the kernel only at this point and has no libc, and thus no
- # headers, crt*.o, etc., all of which are needed by these.
- unsupported_languages="$unsupported_languages java"
- ;;
hppa*64*-*-hpux*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
hppa*-hp-hpux11*)
;;
hppa*-*-hpux*)
- # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
- # build on HP-UX 10.20.
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
ia64*-*-*vms*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
i[3456789]86-w64-mingw*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
i[3456789]86-*-mingw*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
x86_64-*-mingw*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
mmix-*-*)
- noconfigdirs="$noconfigdirs target-libffi target-boehm-gc"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
- mips*-*-irix6*)
- # Linking libjava exceeds command-line length limits on at least
- # IRIX 6.2, but not on IRIX 6.5.
- # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
- # <oldham@codesourcery.com>
- noconfigdirs="$noconfigdirs ${libgcj}"
+ ft32-*-*)
+ noconfigdirs="$noconfigdirs target-libffi"
;;
*-*-lynxos*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libffi"
+ ;;
+esac
+
+# Disable the go frontend on systems where it is known to not work. Please keep
+# this in sync with contrib/config-list.mk.
+case "${target}" in
+*-*-darwin* | *-*-cygwin* | *-*-mingw* | *-*-aix*)
+ unsupported_languages="$unsupported_languages go"
;;
esac
+# Disable libgo for some systems where it is known to not work.
+# For testing, you can easily override this with --enable-libgo.
+if test x$enable_libgo = x; then
+ case "${target}" in
+ *-*-darwin*)
+ # PR 46986
+ noconfigdirs="$noconfigdirs target-libgo"
+ ;;
+ *-*-cygwin* | *-*-mingw*)
+ noconfigdirs="$noconfigdirs target-libgo"
+ ;;
+ *-*-aix*)
+ noconfigdirs="$noconfigdirs target-libgo"
+ ;;
+ esac
+fi
+
# Default libgloss CPU subdirectory.
libgloss_dir="$target_cpu"
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
libgloss_dir=wince
;;
+ aarch64*-*-* )
+ libgloss_dir=aarch64
+ ;;
arm*-*-*)
libgloss_dir=arm
;;
case "${target}" in
*-*-chorusos)
;;
+ aarch64-*-darwin*)
+ noconfigdirs="$noconfigdirs ld gas gdb gprof"
+ noconfigdirs="$noconfigdirs sim target-rda"
+ ;;
+ arm-*-darwin*)
+ noconfigdirs="$noconfigdirs ld gas gdb gprof"
+ noconfigdirs="$noconfigdirs sim target-rda"
+ ;;
powerpc-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
*-*-netware*)
;;
+ *-*-phoenix*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
;;
- arc-*-*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ arc*-*-*)
+ noconfigdirs="$noconfigdirs sim"
;;
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss"
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss"
;;
+ avr-*-*)
+ if test x${with_avrlibc} != xno; then
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ fi
+ ;;
c4x-*-* | tic4x-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
tic54x-*-*)
noconfigdirs="$noconfigdirs target-libgloss gdb"
;;
- cr16-*-*)
- noconfigdirs="$noconfigdirs gdb"
- ;;
d10v-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
fr30-*-elf*)
noconfigdirs="$noconfigdirs gdb"
;;
+ ft32-*-*)
+ noconfigdirs="$noconfigdirs target-rda gprof"
+ ;;
moxie-*-*)
- noconfigdirs="$noconfigdirs gprof"
+ noconfigdirs="$noconfigdirs"
;;
h8300*-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
hppa1.1-*-osf* | hppa1.1-*-bsd* )
;;
+ hppa*64*-*-hpux*)
+ noconfigdirs="$noconfigdirs gdb"
+ ;;
+ hppa*-*-hpux11*)
+ noconfigdirs="$noconfigdirs gdb ld"
+ ;;
hppa*64*-*-linux*)
;;
hppa*-*-linux*)
hppa*-*-openbsd* | \
hppa*64*-*-*)
;;
- hppa*-hp-hpux11*)
- noconfigdirs="$noconfigdirs ld"
- ;;
hppa*-*-pro*)
;;
hppa*-*-*)
;;
ia64*-**-hpux*)
# No ld support yet.
- noconfigdirs="$noconfigdirs libgui itcl ld"
+ noconfigdirs="$noconfigdirs gdb libgui itcl ld"
;;
ia64*-*-*vms*)
- # No gdb or ld support yet.
- noconfigdirs="$noconfigdirs readline libgui itcl gdb ld"
+ # No ld support yet.
+ noconfigdirs="$noconfigdirs libgui itcl ld"
;;
i[3456789]86-w64-mingw*)
;;
microblaze*)
noconfigdirs="$noconfigdirs gprof"
;;
- mips*-sde-elf*)
+ mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*)
if test x$with_newlib = xyes; then
noconfigdirs="$noconfigdirs gprof"
fi
noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
mips*-*-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss"
+ noconfigdirs="$noconfigdirs ld gas gprof target-libgloss"
;;
mips*-*-linux*)
;;
+ mips*-*-ultrix* | mips*-*-osf* | mips*-*-ecoff* | mips*-*-pe* \
+ | mips*-*-irix* | mips*-*-lnews* | mips*-*-riscos*)
+ noconfigdirs="$noconfigdirs ld gas gprof"
+ ;;
mips*-*-*)
noconfigdirs="$noconfigdirs gprof"
;;
- sh-*-* | sh64-*-*)
+ nvptx*-*-*)
+ noconfigdirs="$noconfigdirs target-libssp target-libstdc++-v3 target-libobjc"
+ ;;
+ sh-*-*)
case "${target}" in
sh*-*-elf)
;;
tic6x-*-*)
noconfigdirs="$noconfigdirs sim"
;;
- tilepro-*-* | tilegx-*-*)
+ tilepro*-*-* | tilegx*-*-*)
noconfigdirs="$noconfigdirs sim"
;;
v810-*-*)
*-mingw*)
host_makefile_frag="config/mh-mingw"
;;
- *-interix*)
- host_makefile_frag="config/mh-interix"
+ alpha*-linux*)
+ host_makefile_frag="config/mh-alpha-linux"
;;
hppa*-hp-hpux10*)
host_makefile_frag="config/mh-pa-hpux10"
AS_FOR_BUILD=${AS_FOR_BUILD-as}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
- GCJ_FOR_BUILD=${GCJ_FOR_BUILD-gcj}
GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo}
DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
AS_FOR_BUILD="\$(AS)"
CC_FOR_BUILD="\$(CC)"
CXX_FOR_BUILD="\$(CXX)"
- GCJ_FOR_BUILD="\$(GCJ)"
GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
GOC_FOR_BUILD="\$(GOC)"
DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
fi
fi
+# Check whether -static-libstdc++ -static-libgcc is supported.
+have_static_libs=no
+if test "$GCC" = yes; then
+ saved_LDFLAGS="$LDFLAGS"
+
+ LDFLAGS="$LDFLAGS -static-libstdc++ -static-libgcc"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether g++ accepts -static-libstdc++ -static-libgcc" >&5
+$as_echo_n "checking whether g++ accepts -static-libstdc++ -static-libgcc... " >&6; }
+ ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if (__GNUC__ < 4) || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+#error -static-libstdc++ not implemented
+#endif
+int main() {}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }; have_static_libs=yes
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ LDFLAGS="$saved_LDFLAGS"
+fi
+
else
echo abfoo >t1
echo cdfoo >t2
- gcc_cv_prog_cmp_skip='tail +16c $$f1 > tmp-foo1; tail +16c $$f2 > tmp-foo2; cmp tmp-foo1 tmp-foo2'
+ gcc_cv_prog_cmp_skip='tail -c +17 $$f1 > tmp-foo1; tail -c +17 $$f2 > tmp-foo2; cmp tmp-foo1 tmp-foo2'
if cmp t1 t2 2 2 > /dev/null 2>&1; then
if cmp t1 t2 1 1 > /dev/null 2>&1; then
:
;;
esac
-# See if we are building gcc with C++.
-# Check whether --enable-build-with-cxx was given.
-if test "${enable_build_with_cxx+set}" = set; then :
- enableval=$enable_build_with_cxx; ENABLE_BUILD_WITH_CXX=$enableval
-else
- ENABLE_BUILD_WITH_CXX=no
-fi
-
-
-# Build stage1 with C and build stages 2 and 3 with C++.
-# Check whether --enable-build-poststage1-with-cxx was given.
-if test "${enable_build_poststage1_with_cxx+set}" = set; then :
- enableval=$enable_build_poststage1_with_cxx; ENABLE_BUILD_POSTSTAGE1_WITH_CXX=$enableval
-else
- ENABLE_BUILD_POSTSTAGE1_WITH_CXX=yes
+# When bootstrapping with GCC, build stage 1 in C++98 mode to ensure that a
+# C++98 compiler can still start the bootstrap.
+if test "$enable_bootstrap:$GXX" = "yes:yes"; then
+ CXX="$CXX -std=gnu++98"
fi
-
# Used for setting $lt_cv_objdir
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
$as_echo_n "checking for objdir... " >&6; }
gmplibs="-L$with_mpfr_lib $gmplibs"
fi
if test "x$with_mpfr$with_mpfr_include$with_mpfr_lib" = x && test -d ${srcdir}/mpfr; then
- gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir $gmplibs"
- gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr '"$gmpinc"
- extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir"
+ # MPFR v3.1.0 moved the sources into a src sub-directory.
+ if ! test -d ${srcdir}/mpfr/src; then
+ as_fn_error "Building GCC with MPFR in the source tree is only handled for MPFR 3.1.0+." "$LINENO" 5
+ fi
+ gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/src/'"$lt_cv_objdir $gmplibs"
+ gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr/src -I$$s/mpfr/src '"$gmpinc"
+ extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr/src --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/src/'"$lt_cv_objdir"
# Do not test the mpfr version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
# but it would be included on the link line in the version check below
gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc"
extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
+ extra_isl_gmp_configure_flags='--with-gmp-builddir=$$r/$(HOST_SUBDIR)/gmp'
# Do not test the gmp version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
# but it would be included on the link line in the version check below
#define GCC_GMP_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c))
#define GCC_GMP_VERSION GCC_GMP_VERSION_NUM(__GNU_MP_VERSION,__GNU_MP_VERSION_MINOR,__GNU_MP_VERSION_PATCHLEVEL)
- #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,2,0)
+ #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,2,3)
choke me
#endif
main ()
{
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,1)
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,4,0)
choke me
#endif
# The library versions listed in the error message below should match
# the HARD-minimums enforced above.
if test x$have_gmp != xyes; then
- as_fn_error "Building GCC requires GMP 4.2+, MPFR 2.3.1+ and MPC 0.8.0+.
+ as_fn_error "Building GCC requires GMP 4.2+, MPFR 2.4.0+ and MPC 0.8.0+.
Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify
their locations. Source code for these libraries can be found at
their respective hosting sites as well as at
-# Allow host libstdc++ to be specified for static linking with PPL.
-# Check whether --with-host-libstdcxx was given.
-if test "${with_host_libstdcxx+set}" = set; then :
- withval=$with_host_libstdcxx;
+# Libraries to use for stage1 or when not bootstrapping.
+
+# Check whether --with-stage1-libs was given.
+if test "${with_stage1_libs+set}" = set; then :
+ withval=$with_stage1_libs; if test "$withval" = "no" -o "$withval" = "yes"; then
+ stage1_libs=
+ else
+ stage1_libs=$withval
+ fi
+else
+ stage1_libs=
fi
-case $with_host_libstdcxx in
- no|yes)
- as_fn_error "-with-host-libstdcxx needs an argument" "$LINENO" 5
- ;;
-esac
-# Linker flags to use for stage1 or when not boostrapping.
+# Linker flags to use for stage1 or when not bootstrapping.
# Check whether --with-stage1-ldflags was given.
if test "${with_stage1_ldflags+set}" = set; then :
fi
else
stage1_ldflags=
-fi
-
-
-
-# Libraries to use for stage1 or when not bootstrapping.
-
-# Check whether --with-stage1-libs was given.
-if test "${with_stage1_libs+set}" = set; then :
- withval=$with_stage1_libs; if test "$withval" = "no" -o "$withval" = "yes"; then
- stage1_libs=
- else
- stage1_libs=$withval
+ # In stage 1, default to linking libstdc++ and libgcc statically with GCC
+ # if supported. But if the user explicitly specified the libraries to use,
+ # trust that they are doing what they want.
+ if test "$stage1_libs" = "" -a "$have_static_libs" = yes; then
+ stage1_ldflags="-static-libstdc++ -static-libgcc"
fi
-else
- stage1_libs=$with_host_libstdcxx
fi
-# Libraries to use for stage2 and later builds. This defaults to the
-# argument passed to --with-host-libstdcxx.
+# Libraries to use for stage2 and later builds.
# Check whether --with-boot-libs was given.
if test "${with_boot_libs+set}" = set; then :
poststage1_libs=$withval
fi
else
- poststage1_libs=$with_host_libstdcxx
+ poststage1_libs=
fi
-# Check for PPL
-ppllibs=
-pplinc=
-pwllib=
+# GCC GRAPHITE dependency isl.
+# Basic setup is inlined here, actual checks are in config/isl.m4
-# Check whether --with-ppl was given.
-if test "${with_ppl+set}" = set; then :
- withval=$with_ppl;
+# Check whether --with-isl was given.
+if test "${with_isl+set}" = set; then :
+ withval=$with_isl;
fi
-# Check whether --with-ppl-include was given.
-if test "${with_ppl_include+set}" = set; then :
- withval=$with_ppl_include;
-fi
+# Treat --without-isl as a request to disable
+# GRAPHITE support and skip all following checks.
+if test "x$with_isl" != "xno"; then
+ # Check for isl
-# Check whether --with-ppl-lib was given.
-if test "${with_ppl_lib+set}" = set; then :
- withval=$with_ppl_lib;
+# Check whether --with-isl-include was given.
+if test "${with_isl_include+set}" = set; then :
+ withval=$with_isl_include;
fi
-# Check whether --enable-ppl-version-check was given.
-if test "${enable_ppl_version_check+set}" = set; then :
- enableval=$enable_ppl_version_check;
+# Check whether --with-isl-lib was given.
+if test "${with_isl_lib+set}" = set; then :
+ withval=$with_isl_lib;
fi
-case $with_ppl in
- yes | no | "")
- ;;
- *)
- ppllibs="-L$with_ppl/lib"
- pplinc="-I$with_ppl/include $pplinc"
- if test -d "$with_ppl/lib" && test -d "$with_ppl/include"; then
- with_ppl=yes
- else
- as_fn_error "cannot find directories \"$with_ppl/lib\" or \"$with_ppl/include\"" "$LINENO" 5
- fi
- ;;
-esac
-
-if test x"$with_ppl_include" != x; then
- pplinc="-I$with_ppl_include $pplinc"
- with_ppl=yes
+ # Check whether --enable-isl-version-check was given.
+if test "${enable_isl_version_check+set}" = set; then :
+ enableval=$enable_isl_version_check; ENABLE_ISL_CHECK=$enableval
+else
+ ENABLE_ISL_CHECK=yes
fi
-if test "x$with_ppl_lib" != x; then
- ppllibs="-L$with_ppl_lib"
- with_ppl=yes
-fi
-if test x"$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
- if test x"$enable_watchdog" = xyes; then
- pwllib="-lpwl"
+ # Initialize isllibs and islinc.
+ case $with_isl in
+ no)
+ isllibs=
+ islinc=
+ ;;
+ "" | yes)
+ ;;
+ *)
+ isllibs="-L$with_isl/lib"
+ islinc="-I$with_isl/include"
+ ;;
+ esac
+ if test "x${with_isl_include}" != x ; then
+ islinc="-I$with_isl_include"
+ fi
+ if test "x${with_isl_lib}" != x; then
+ isllibs="-L$with_isl_lib"
+ fi
+ if test "x${islinc}" = x && test "x${isllibs}" = x \
+ && test -d ${srcdir}/isl; then
+ isllibs='-L$$r/$(HOST_SUBDIR)/isl/'"$lt_cv_objdir"' '
+ islinc='-I$$r/$(HOST_SUBDIR)/isl/include -I$$s/isl/include'
+ ENABLE_ISL_CHECK=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using in-tree isl, disabling version check" >&5
+$as_echo "$as_me: WARNING: using in-tree isl, disabling version check" >&2;}
fi
- ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"
- pplinc='-I$$r/$(HOST_SUBDIR)/ppl/src -I$$r/$(HOST_SUBDIR)/ppl/interfaces/C '
- enable_ppl_version_check=no
- with_ppl=yes
-fi
-if test "x$with_ppl" != xno; then
- if test "x$pwllib" = x; then
- saved_LIBS="$LIBS"
- LIBS="$LIBS $ppllibs -lstdc++ -lm"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PWL_handle_timeout in -lpwl" >&5
-$as_echo_n "checking for PWL_handle_timeout in -lpwl... " >&6; }
-if test "${ac_cv_lib_pwl_PWL_handle_timeout+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpwl $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
+ isllibs="${isllibs} -lisl"
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char PWL_handle_timeout ();
+
+
+ if test "${ENABLE_ISL_CHECK}" = yes ; then
+ _isl_saved_CFLAGS=$CFLAGS
+ _isl_saved_LDFLAGS=$LDFLAGS
+ _isl_saved_LIBS=$LIBS
+
+ CFLAGS="${_isl_saved_CFLAGS} ${islinc} ${gmpinc}"
+ LDFLAGS="${_isl_saved_LDFLAGS} ${isllibs} ${gmplibs}"
+ LIBS="${_isl_saved_LIBS} -lisl -lgmp"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for isl 0.16, 0.15, or deprecated 0.14" >&5
+$as_echo_n "checking for isl 0.16, 0.15, or deprecated 0.14... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <isl/ctx.h>
int
main ()
{
-return PWL_handle_timeout ();
+isl_ctx_get_max_operations (isl_ctx_alloc ());
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_pwl_PWL_handle_timeout=yes
+ gcc_cv_isl=yes
else
- ac_cv_lib_pwl_PWL_handle_timeout=no
+ gcc_cv_isl=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pwl_PWL_handle_timeout" >&5
-$as_echo "$ac_cv_lib_pwl_PWL_handle_timeout" >&6; }
-if test "x$ac_cv_lib_pwl_PWL_handle_timeout" = x""yes; then :
- pwllib="-lpwl"
-fi
-
- LIBS="$saved_LIBS"
- fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_isl" >&5
+$as_echo "$gcc_cv_isl" >&6; }
- ppllibs="$ppllibs -lppl_c -lppl $pwllib -lgmpxx"
+ if test "${gcc_cv_isl}" = no ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: recommended isl version is 0.16 or 0.15, the minimum required isl version 0.14 is deprecated" >&5
+$as_echo "recommended isl version is 0.16 or 0.15, the minimum required isl version 0.14 is deprecated" >&6; }
+ fi
- if test "$enable_ppl_version_check" != no; then
- saved_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $pplinc $gmpinc"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.11 (revision 0 or later) of PPL" >&5
-$as_echo_n "checking for version 0.11 (revision 0 or later) of PPL... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for isl 0.16 or 0.15" >&5
+$as_echo_n "checking for isl 0.16 or 0.15... " >&6; }
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-#include "ppl_c.h"
+#include <isl/schedule.h>
int
main ()
{
-
- #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11
- choke me
- #endif
-
+isl_options_set_schedule_serialize_sccs (NULL, 0);
;
return 0;
}
_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_has_isl_options_set_schedule_serialize_sccs=yes
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }; ppllibs= ; pplinc= ; with_ppl=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CFLAGS="$saved_CFLAGS"
- fi
+ ac_has_isl_options_set_schedule_serialize_sccs=no
fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_has_isl_options_set_schedule_serialize_sccs" >&5
+$as_echo "$ac_has_isl_options_set_schedule_serialize_sccs" >&6; }
-# Flags needed for PPL
+ if test x"$ac_has_isl_options_set_schedule_serialize_sccs" = x"yes"; then
+ islver="0.15"
+ fi
+ CFLAGS=$_isl_saved_CFLAGS
+ LDFLAGS=$_isl_saved_LDFLAGS
+ LIBS=$_isl_saved_LIBS
+ fi
-# Check for CLOOG
-# Check whether --with-cloog was given.
-if test "${with_cloog+set}" = set; then :
- withval=$with_cloog;
-fi
+ if test "x${with_isl}" = xno; then
+ graphite_requested=no
+ elif test "x${with_isl}" != x \
+ || test "x${with_isl_include}" != x \
+ || test "x${with_isl_lib}" != x ; then
+ graphite_requested=yes
+ else
+ graphite_requested=no
+ fi
-# Check whether --with-cloog-include was given.
-if test "${with_cloog_include+set}" = set; then :
- withval=$with_cloog_include;
-fi
-# Check whether --with-cloog-lib was given.
-if test "${with_cloog_lib+set}" = set; then :
- withval=$with_cloog_lib;
-fi
+ if test "${gcc_cv_isl}" = no ; then
+ isllibs=
+ islinc=
+ fi
+
+ if test "${graphite_requested}" = yes \
+ && test "x${isllibs}" = x \
+ && test "x${islinc}" = x ; then
+
+ as_fn_error "Unable to find a usable isl. See config.log for details." "$LINENO" 5
+ fi
- # Check whether --enable-cloog-backend was given.
-if test "${enable_cloog_backend+set}" = set; then :
- enableval=$enable_cloog_backend; if test "x${enableval}" = "xisl"; then
- cloog_backend=isl
- elif test "x${enableval}" = "xppl"; then
- cloog_backend=ppl
- else
- cloog_backend=ppl-legacy
- fi
-else
- cloog_backend=ppl-legacy
fi
- # Check whether --enable-cloog-version-check was given.
-if test "${enable_cloog_version_check+set}" = set; then :
- enableval=$enable_cloog_version_check; ENABLE_CLOOG_CHECK=$enableval
-else
- ENABLE_CLOOG_CHECK=yes
+# If the isl check failed, disable builds of in-tree variant of isl
+if test "x$with_isl" = xno ||
+ test "x$gcc_cv_isl" = xno; then
+ noconfigdirs="$noconfigdirs isl"
+ islinc=
fi
- # Initialize clooglibs and clooginc.
- case $with_cloog in
- no)
- clooglibs=
- clooginc=
- ;;
- "" | yes)
- ;;
- *)
- clooglibs="-L$with_cloog/lib"
- clooginc="-I$with_cloog/include"
- ;;
- esac
- if test "x${with_cloog_include}" != x ; then
- clooginc="-I$with_cloog_include"
- fi
- if test "x${with_cloog_lib}" != x; then
- clooglibs="-L$with_cloog_lib"
- fi
+# Check for LTO support.
+# Check whether --enable-lto was given.
+if test "${enable_lto+set}" = set; then :
+ enableval=$enable_lto; enable_lto=$enableval
+else
+ enable_lto=yes; default_enable_lto=yes
+fi
+
-if test "x$with_ppl" = "xno"; then
+target_elf=no
+case $target in
+ *-darwin* | *-aix* | *-cygwin* | *-mingw* | *-aout* | *-*coff* | \
+ *-msdosdjgpp* | *-vms* | *-wince* | *-*-pe* | \
+ alpha*-dec-osf* | *-interix* | hppa[12]*-*-hpux* | \
+ nvptx-*-none)
+ target_elf=no
+ ;;
+ *)
+ target_elf=yes
+ ;;
+esac
+if test $target_elf = yes; then :
+ # ELF platforms build the lto-plugin always.
+ build_lto_plugin=yes
- if test "x${with_cloog}" = xno; then
- graphite_requested=no
- elif test "x${with_cloog}" != x \
- || test "x${with_cloog_include}" != x \
- || test "x${with_cloog_lib}" != x ; then
- graphite_requested=yes
+else
+ if test x"$default_enable_lto" = x"yes" ; then
+ case $target in
+ *-apple-darwin9* | *-cygwin* | *-mingw* | *djgpp*) ;;
+ # On other non-ELF platforms, LTO has yet to be validated.
+ *) enable_lto=no ;;
+ esac
else
- graphite_requested=no
+ # Apart from ELF platforms, only Windows and Darwin support LTO so far.
+ # It would also be nice to check the binutils support, but we don't
+ # have gcc_GAS_CHECK_FEATURE available here. For now, we'll just
+ # warn during gcc/ subconfigure; unless you're bootstrapping with
+ # -flto it won't be needed until after installation anyway.
+ case $target in
+ *-cygwin* | *-mingw* | *-apple-darwin* | *djgpp*) ;;
+ *) if test x"$enable_lto" = x"yes"; then
+ as_fn_error "LTO support is not enabled for this target." "$LINENO" 5
+ fi
+ ;;
+ esac
fi
+ # Among non-ELF, only Windows platforms support the lto-plugin so far.
+ # Build it unless LTO was explicitly disabled.
+ case $target in
+ *-cygwin* | *-mingw*) build_lto_plugin=$enable_lto ;;
+ *) ;;
+ esac
+
+fi
- if test "${graphite_requested}" = yes; then
- as_fn_error "Unable to find a usable PPL. See config.log for details." "$LINENO" 5
- fi
- with_cloog=no
+# Check whether --enable-linker-plugin-configure-flags was given.
+if test "${enable_linker_plugin_configure_flags+set}" = set; then :
+ enableval=$enable_linker_plugin_configure_flags; extra_linker_plugin_configure_flags=$enableval
+else
+ extra_linker_plugin_configure_flags=
fi
-if test "x${with_cloog}" = x && test "x${with_cloog_include}" = x \
- && test "x${with_cloog_lib}" = x && test -d ${srcdir}/cloog; then
- clooglibs='-L$$r/$(HOST_SUBDIR)/cloog/'"$lt_cv_objdir"' '
- clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include '
+
+
+# Check whether --enable-linker-plugin-flags was given.
+if test "${enable_linker_plugin_flags+set}" = set; then :
+ enableval=$enable_linker_plugin_flags; extra_linker_plugin_flags=$enableval
+else
+ extra_linker_plugin_flags=
fi
-if test "x$with_cloog" != "xno"; then
- _cloog_saved_CFLAGS=$CFLAGS
- _cloog_saved_CPPFLAGS=$CPPFLAGS
- _cloog_saved_LDFLAGS=$LDFLAGS
- _cloog_saved_LIBS=$LIBS
- _cloogorginc="-DCLOOG_INT_GMP -DCLOOG_ORG"
+# By default, C and C++ are the only stage 1 languages.
+stage1_languages=,c,
- CFLAGS="${CFLAGS} ${clooginc} ${gmpinc}"
- CPPFLAGS="${CPPFLAGS} ${_cloogorginc}"
- LDFLAGS="${LDFLAGS} ${clooglibs}"
-
- case $cloog_backend in
- "ppl-legacy")
- CFLAGS="${CFLAGS} ${pplinc}"
- LDFLAGS="${LDFLAGS} ${ppllibs}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for installed CLooG PPL Legacy" >&5
-$as_echo_n "checking for installed CLooG PPL Legacy... " >&6; }
-if test "${gcc_cv_cloog_type+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- LIBS="-lcloog ${_cloog_saved_LIBS}"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include "cloog/cloog.h"
-int
-main ()
-{
-#ifndef CLOOG_PPL_BACKEND
- choke me
- #endif
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- gcc_cv_cloog_type="PPL Legacy"
-else
- gcc_cv_cloog_type=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_cloog_type" >&5
-$as_echo "$gcc_cv_cloog_type" >&6; }
- ;;
- "isl")
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for installed CLooG ISL" >&5
-$as_echo_n "checking for installed CLooG ISL... " >&6; }
-if test "${gcc_cv_cloog_type+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- LIBS="-lcloog-isl ${_cloog_saved_LIBS}"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include "cloog/cloog.h"
-int
-main ()
-{
-cloog_version ()
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- gcc_cv_cloog_type="ISL"
-else
- gcc_cv_cloog_type=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_cloog_type" >&5
-$as_echo "$gcc_cv_cloog_type" >&6; }
- ;;
- "ppl")
- CFLAGS="${CFLAGS} ${pplinc}"
- LDFLAGS="${LDFLAGS} ${ppllibs}"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for installed CLooG PPL" >&5
-$as_echo_n "checking for installed CLooG PPL... " >&6; }
-if test "${gcc_cv_cloog_type+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- LIBS="-lcloog-ppl ${_cloog_saved_LIBS}"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include "cloog/cloog.h"
- #include "cloog/ppl/cloog.h"
-int
-main ()
-{
-cloog_version ()
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- gcc_cv_cloog_type="PPL"
-else
- gcc_cv_cloog_type=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_cloog_type" >&5
-$as_echo "$gcc_cv_cloog_type" >&6; }
- ;;
- *)
- gcc_cv_cloog_type=""
- esac
-
- case $gcc_cv_cloog_type in
- "PPL Legacy")
- clooginc="${clooginc}"
- clooglibs="${clooglibs} -lcloog"
- cloog_org=no
- ;;
- "ISL")
- clooginc="${clooginc} ${_cloogorginc}"
- clooglibs="${clooglibs} -lcloog-isl -lisl"
- cloog_org=yes
- ;;
- "PPL")
- clooginc="${clooginc} ${_cloogorginc}"
- clooglibs="${clooglibs} -lcloog-ppl"
- cloog_org=yes
- ;;
- *)
- clooglibs=
- clooginc=
- cloog_org=
- ;;
- esac
-
- LIBS=$_cloog_saved_LIBS
- CFLAGS=$_cloog_saved_CFLAGS
- CPPFLAGS=$_cloog_saved_CPPFLAGS
- LDFLAGS=$_cloog_saved_LDFLAGS
-
-
-
-
-
- if test "${ENABLE_CLOOG_CHECK}" = yes ; then
- _cloog_saved_CFLAGS=$CFLAGS
- _cloog_saved_LDFLAGS=$LDFLAGS
-
- CFLAGS="${_cloog_saved_CFLAGS} ${clooginc} ${pplinc} ${gmpinc}"
- LDFLAGS="${_cloog_saved_LDFLAGS} ${clooglibs} ${ppllibs}"
-
- if test "${cloog_org}" = yes ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.16.1 of CLooG" >&5
-$as_echo_n "checking for version 0.16.1 of CLooG... " >&6; }
-if test "${gcc_cv_cloog_ct_0_14_0+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include "cloog/cloog.h"
-int
-main ()
-{
-#if CLOOG_VERSION_MAJOR != 0 \
- || CLOOG_VERSION_MINOR != 16 \
- || CLOOG_VERSION_REVISION < 1
- choke me
- #endif
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- gcc_cv_cloog_ct_0_14_0=yes
-else
- gcc_cv_cloog_ct_0_14_0=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_cloog_ct_0_14_0" >&5
-$as_echo "$gcc_cv_cloog_ct_0_14_0" >&6; }
- elif test "${cloog_org}" = no ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.15.5 (or later revision) of CLooG" >&5
-$as_echo_n "checking for version 0.15.5 (or later revision) of CLooG... " >&6; }
-if test "${gcc_cv_cloog_ct_0_15_5+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include "cloog/cloog.h"
-int
-main ()
-{
-#if CLOOG_VERSION_MAJOR != 0 \
- || CLOOG_VERSION_MINOR != 15 \
- || CLOOG_VERSION_REVISION < 5
- choke me
- #endif
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include "cloog/cloog.h"
-int
-main ()
-{
-#if CLOOG_VERSION_MAJOR != 0 \
- || CLOOG_VERSION_MINOR != 15 \
- || CLOOG_VERSION_REVISION < 9
- choke me
- #endif
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- gcc_cv_cloog_ct_0_15_5=yes
-else
- gcc_cv_cloog_ct_0_15_5="buggy but acceptable"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
- gcc_cv_cloog_ct_0_15_5=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_cloog_ct_0_15_5" >&5
-$as_echo "$gcc_cv_cloog_ct_0_15_5" >&6; }
- fi
-
- CFLAGS=$_cloog_saved_CFLAGS
- LDFLAGS=$_cloog_saved_LDFLAGS
- fi
-
-
-
-
-
-
-
- if test "x${with_cloog}" = xno; then
- graphite_requested=no
- elif test "x${with_cloog}" != x \
- || test "x${with_cloog_include}" != x \
- || test "x${with_cloog_lib}" != x ; then
- graphite_requested=yes
- else
- graphite_requested=no
- fi
-
-
-
- if test "${gcc_cv_cloog_ct_0_14_0}" = no \
- || test "${gcc_cv_cloog_rt_0_14_0}" = no \
- || test "${gcc_cv_cloog_ct_0_15_5}" = no; then
- clooglibs=
- clooginc=
- fi
-
- if test "${graphite_requested}" = yes \
- && test "x${clooglibs}" = x \
- && test "x${clooginc}" = x ; then
-
- as_fn_error "Unable to find a usable CLooG. See config.log for details." "$LINENO" 5
- fi
-
-
-fi
-
-# Check for LTO support.
-# Check whether --enable-lto was given.
-if test "${enable_lto+set}" = set; then :
- enableval=$enable_lto; enable_lto=$enableval
-else
- enable_lto=yes; default_enable_lto=yes
-fi
-
-
-
-
-
-target_elf=no
-case $target in
- *-darwin* | *-aix* | *-cygwin* | *-mingw* | *-aout* | *-*coff* | \
- *-msdosdjgpp* | *-vms* | *-wince* | *-*-pe* | \
- alpha*-dec-osf* | *-interix* | hppa[12]*-*-hpux*)
- target_elf=no
- ;;
- *)
- target_elf=yes
- ;;
-esac
-
-if test $target_elf = yes; then :
- # ELF platforms build the lto-plugin always.
- build_lto_plugin=yes
-
-else
- if test x"$default_enable_lto" = x"yes" ; then
- case $target in
- *-apple-darwin9* | *-cygwin* | *-mingw*) ;;
- # On other non-ELF platforms, LTO has yet to be validated.
- *) enable_lto=no ;;
- esac
- else
- # Apart from ELF platforms, only Windows and Darwin support LTO so far.
- # It would also be nice to check the binutils support, but we don't
- # have gcc_GAS_CHECK_FEATURE available here. For now, we'll just
- # warn during gcc/ subconfigure; unless you're bootstrapping with
- # -flto it won't be needed until after installation anyway.
- case $target in
- *-cygwin* | *-mingw* | *-apple-darwin*) ;;
- *) if test x"$enable_lto" = x"yes"; then
- as_fn_error "LTO support is not enabled for this target." "$LINENO" 5
- fi
- ;;
- esac
- fi
- # Among non-ELF, only Windows platforms support the lto-plugin so far.
- # Build it unless LTO was explicitly disabled.
- case $target in
- *-cygwin* | *-mingw*) build_lto_plugin=$enable_lto ;;
- *) ;;
- esac
-
-fi
-
-
-
-# By default, C is the only stage 1 language.
-stage1_languages=,c,
-
-# Target libraries that we bootstrap.
-bootstrap_target_libs=,target-libgcc,
+# Target libraries that we bootstrap.
+bootstrap_target_libs=,target-libgcc,
# Figure out what language subdirectories are present.
# Look if the user specified --enable-languages="..."; if not, use
if test x"${enable_languages+set}" != xset; then
if test x"${LANGUAGES+set}" = xset; then
enable_languages="${LANGUAGES}"
- echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
+ echo configure.ac: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
else
enable_languages=all
fi
if test x"${enable_languages}" = x ||
test x"${enable_languages}" = xyes;
then
- echo configure.in: --enable-languages needs at least one language argument 1>&2
+ echo configure.ac: --enable-languages needs at least one language argument 1>&2
exit 1
fi
fi
# and make the substitution.
case ,${enable_languages}, in
*,f95,*)
- echo configure.in: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
+ echo configure.ac: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'`
;;
esac
- # If bootstrapping, then using --enable-build-with-cxx or
- # --enable-build-poststage1-with-cxx requires enabling C++.
- case ",$enable_languages,:,$ENABLE_BUILD_WITH_CXX,$ENABLE_BUILD_POSTSTAGE1_WITH_CXX,:$enable_bootstrap" in
- *,c++,*:*:*) ;;
- *:*,yes,*:yes)
+ # If bootstrapping, C++ must be enabled.
+ case ",$enable_languages,:$enable_bootstrap" in
+ *,c++,*:*) ;;
+ *:yes)
if test -f ${srcdir}/gcc/cp/config-lang.in; then
enable_languages="${enable_languages},c++"
else
- as_fn_error "bootstrapping with --enable-build-with-cxx or --enable-build-poststage1-with-cxx requires c++ sources" "$LINENO" 5
+ as_fn_error "bootstrapping requires c++ sources" "$LINENO" 5
fi
;;
esac
new_enable_languages=,c,
# If LTO is enabled, add the LTO front end.
- extra_host_libiberty_configure_flags=
if test "$enable_lto" = "yes" ; then
case ,${enable_languages}, in
*,lto,*) ;;
esac
if test "${build_lto_plugin}" = "yes" ; then
configdirs="$configdirs lto-plugin"
- extra_host_libiberty_configure_flags=--enable-shared
fi
fi
+ # If we're building an offloading compiler, add the LTO front end.
+ if test x"$enable_as_accelerator_for" != x ; then
+ case ,${enable_languages}, in
+ *,lto,*) ;;
+ *) enable_languages="${enable_languages},lto" ;;
+ esac
+ fi
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
potential_languages=,c,
fi
if test "$language" = "c++"; then
- if test "$ENABLE_BUILD_WITH_CXX" = "yes" \
- || test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
- boot_language=yes
- fi
+ boot_language=yes
fi
+ add_this_lang=no
case ,${enable_languages}, in
*,${language},*)
- # Language was explicitly selected; include it.
- add_this_lang=yes
+ # Language was explicitly selected; include it
+ # unless it is C, which is enabled by default.
+ if test "$language" != "c"; then
+ add_this_lang=yes
+ fi
;;
*,all,*)
# 'all' was selected, select it if it is a default language
- add_this_lang=${build_by_default}
- ;;
- *)
- add_this_lang=no
+ if test "$language" != "c"; then
+ add_this_lang=${build_by_default}
+ fi
;;
esac
# Check for Boehm's garbage collector
# Check whether --enable-objc-gc was given.
if test "${enable_objc_gc+set}" = set; then :
- enableval=$enable_objc_gc; case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in
- *,objc,*:*:yes:*target-boehm-gc*)
- as_fn_error "Boehm's garbage collector was requested yet not supported in this configuration" "$LINENO" 5
- ;;
-esac
+ enableval=$enable_objc_gc;
+fi
+
+
+# Check whether --with-target-bdw-gc was given.
+if test "${with_target_bdw_gc+set}" = set; then :
+ withval=$with_target_bdw_gc;
+fi
+
+
+# Check whether --with-target-bdw-gc-include was given.
+if test "${with_target_bdw_gc_include+set}" = set; then :
+ withval=$with_target_bdw_gc_include;
+fi
+
+
+# Check whether --with-target-bdw-gc-lib was given.
+if test "${with_target_bdw_gc_lib+set}" = set; then :
+ withval=$with_target_bdw_gc_lib;
fi
-# Make sure we only build Boehm's garbage collector if required.
-case ,${enable_languages},:${enable_objc_gc} in
- *,objc,*:yes)
- # Keep target-boehm-gc if requested for Objective-C.
+case ,${enable_languages},:${enable_objc_gc} in *,objc,*:yes|*,objc,*:auto)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for bdw garbage collector" >&5
+$as_echo_n "checking for bdw garbage collector... " >&6; }
+ if test "x$with_target_bdw_gc$with_target_bdw_gc_include$with_target_bdw_gc_lib" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: using bdw-gc in default locations" >&5
+$as_echo "using bdw-gc in default locations" >&6; }
+ else
+ if test "x$with_target_bdw_gc_include" = x && test "x$with_target_bdw_gc_lib" != x; then
+ as_fn_error "found --with-target-bdw-gc-lib but --with-target-bdw-gc-include missing" "$LINENO" 5
+ elif test "x$with_target_bdw_gc_include" != x && test "x$with_target_bdw_gc_lib" = x; then
+ as_fn_error "found --with-target-bdw-gc-include but --with-target-bdw-gc-lib missing" "$LINENO" 5
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: using paths configured with --with-target-bdw-gc options" >&5
+$as_echo "using paths configured with --with-target-bdw-gc options" >&6; }
+ fi
+ fi
+esac
+
+# Disable libcilkrts, libitm, libsanitizer, libvtv, liboffloadmic if we're not building C++
+case ,${enable_languages}, in
+ *,c++,*)
+ # Disable libcilkrts, libitm, libsanitizer if we're not building libstdc++
+ case "${noconfigdirs}" in
+ *target-libstdc++-v3*)
+ noconfigdirs="$noconfigdirs target-libcilkrts target-libitm target-libsanitizer"
+ ;;
+ *) ;;
+ esac
;;
*)
- # Otherwise remove target-boehm-gc depending on target-libjava.
- if echo " ${noconfigdirs} " | grep "target-libjava" >/dev/null 2>&1; then
- noconfigdirs="$noconfigdirs target-boehm-gc"
- fi
+ noconfigdirs="$noconfigdirs target-libcilkrts target-liboffloadmic target-libitm target-libsanitizer target-libvtv"
;;
esac
fi
done
+# libiberty-linker-plugin is special: it doesn't have its own source directory,
+# so we have to add it after the preceding checks.
+if test x"$extra_linker_plugin_flags$extra_linker_plugin_configure_flags" != x
+then
+ case " $configdirs " in
+ *" libiberty "*)
+ # If we can build libiberty, we can also build libiberty-linker-plugin.
+ configdirs="$configdirs libiberty-linker-plugin"
+ extra_linker_plugin_configure_flags="$extra_linker_plugin_configure_flags \
+ --with-libiberty=../libiberty-linker-plugin";;
+ *)
+ as_fn_error "libiberty missing" "$LINENO" 5;;
+ esac
+fi
+
+# Sometimes we have special requirements for the host libiberty.
+extra_host_libiberty_configure_flags=
+extra_host_zlib_configure_flags=
+case " $configdirs " in
+ *" lto-plugin "* | *" libcc1 "*)
+ # When these are to be built as shared libraries, the same applies to
+ # libiberty.
+ extra_host_libiberty_configure_flags=--enable-shared
+ ;;
+ *" bfd "*)
+ # When bfd is to be built as a shared library, the same applies to
+ # zlib.
+ if test "$enable_shared" = "yes"; then
+ extra_host_zlib_configure_flags=--enable-host-shared
+ fi
+ ;;
+esac
+
+
+
# Produce a warning message for the subdirs we can't configure.
# This isn't especially interesting in the Cygnus tree, but in the individual
# FSF releases, it's important to let people know when their machine isn't
# gcc) are built with "-O2 -g", so include those options when setting
# CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
if test "x$CFLAGS_FOR_TARGET" = x; then
- CFLAGS_FOR_TARGET=$CFLAGS
- case " $CFLAGS " in
- *" -O2 "*) ;;
- *) CFLAGS_FOR_TARGET="-O2 $CFLAGS" ;;
- esac
- case " $CFLAGS " in
- *" -g "* | *" -g3 "*) ;;
- *) CFLAGS_FOR_TARGET="-g $CFLAGS" ;;
- esac
+ if test "x${is_cross_compiler}" = xyes; then
+ CFLAGS_FOR_TARGET="-g -O2"
+ else
+ CFLAGS_FOR_TARGET=$CFLAGS
+ case " $CFLAGS " in
+ *" -O2 "*) ;;
+ *) CFLAGS_FOR_TARGET="-O2 $CFLAGS_FOR_TARGET" ;;
+ esac
+ case " $CFLAGS " in
+ *" -g "* | *" -g3 "*) ;;
+ *) CFLAGS_FOR_TARGET="-g $CFLAGS_FOR_TARGET" ;;
+ esac
+ fi
fi
if test "x$CXXFLAGS_FOR_TARGET" = x; then
- CXXFLAGS_FOR_TARGET=$CXXFLAGS
- case " $CXXFLAGS " in
- *" -O2 "*) ;;
- *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS" ;;
- esac
- case " $CXXFLAGS " in
- *" -g "* | *" -g3 "*) ;;
- *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS" ;;
- esac
+ if test "x${is_cross_compiler}" = xyes; then
+ CXXFLAGS_FOR_TARGET="-g -O2"
+ else
+ CXXFLAGS_FOR_TARGET=$CXXFLAGS
+ case " $CXXFLAGS " in
+ *" -O2 "*) ;;
+ *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS_FOR_TARGET" ;;
+ esac
+ case " $CXXFLAGS " in
+ *" -g "* | *" -g3 "*) ;;
+ *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS_FOR_TARGET" ;;
+ esac
+ fi
fi
# have requested that this magic not happen.
#
# The command line options always override the explicit settings in
-# configure.in, and the settings in configure.in override this magic.
+# configure.ac, and the settings in configure.ac override this magic.
#
# If the default for a toolchain is to use GNU as and ld, and you don't
# want to do that, then you should use the --without-gnu-as and
spu-*-*)
target_makefile_frag="config/mt-spu"
;;
- mips*-sde-elf*)
+ mips*-sde-elf* | mips*-mti-elf* | mips*-img-elf*)
target_makefile_frag="config/mt-sde"
;;
mipsisa*-*-elfoabi*)
mips*-*-*linux* | mips*-*-gnu*)
target_makefile_frag="config/mt-mips-gnu"
;;
+ nios2-*-elf*)
+ target_makefile_frag="config/mt-nios2-elf"
+ ;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
target_makefile_frag="config/mt-gnu"
;;
extra_arflags_for_target=" -X32_64"
extra_nmflags_for_target=" -B -X32_64"
;;
- *-*-darwin[3-9]*)
- # ranlib before Darwin10 requires the -c flag to look at common symbols.
- extra_ranlibflags_for_target=" -c"
- ;;
esac
alphaieee_frag=/dev/null
:d30v-*)
ospace_frag="config/mt-d30v"
;;
- :m32r-* | :d10v-* | :fr30-*)
+ :m32r-* | :d10v-* | :fr30-* | :i?86*-*-elfiamcu)
ospace_frag="config/mt-ospace"
;;
no:* | :*)
;;
esac
-# Default to using --with-stabs for certain targets.
-if test x${with_stabs} = x ; then
- case "${target}" in
- mips*-*-irix[56]*)
- ;;
- mips*-*-* | alpha*-*-osf*)
- with_stabs=yes;
- extra_host_args="${extra_host_args} --with-stabs"
- ;;
- esac
-fi
-
# Some systems (e.g., one of the i386-aix systems the gas testers are
# using) don't handle "\$" correctly, so don't use it here.
tooldir='${exec_prefix}'/${target_noncanonical}
GCC_SHLIB_SUBDIR=
fi
+# Adjust the toplevel makefile according to whether bootstrap was selected.
+case $enable_bootstrap in
+ yes)
+ bootstrap_suffix=bootstrap
+ BUILD_CONFIG=bootstrap-debug
+ ;;
+ no)
+ bootstrap_suffix=no-bootstrap
+ BUILD_CONFIG=
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for default BUILD_CONFIG" >&5
+$as_echo_n "checking for default BUILD_CONFIG... " >&6; }
+
+
+# Check whether --with-build-config was given.
+if test "${with_build_config+set}" = set; then :
+ withval=$with_build_config; case $with_build_config in
+ yes) with_build_config= ;;
+ no) with_build_config= BUILD_CONFIG= ;;
+ esac
+fi
+
+
+if test "x${with_build_config}" != x; then
+ BUILD_CONFIG=$with_build_config
+else
+ case $BUILD_CONFIG in
+ bootstrap-debug)
+ if echo "int f (void) { return 0; }" > conftest.c &&
+ ${CC} -c conftest.c &&
+ mv conftest.o conftest.o.g0 &&
+ ${CC} -c -g conftest.c &&
+ mv conftest.o conftest.o.g &&
+ ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then
+ :
+ else
+ BUILD_CONFIG=
+ fi
+ rm -f conftest.c conftest.o conftest.o.g0 conftest.o.g
+ ;;
+ esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_CONFIG" >&5
+$as_echo "$BUILD_CONFIG" >&6; }
+
+
+# Use same top-level configure hooks in libgcc/libstdc++/libvtv.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for --enable-vtable-verify" >&5
+$as_echo_n "checking for --enable-vtable-verify... " >&6; }
+# Check whether --enable-vtable-verify was given.
+if test "${enable_vtable_verify+set}" = set; then :
+ enableval=$enable_vtable_verify; case "$enableval" in
+ yes) enable_vtable_verify=yes ;;
+ no) enable_vtable_verify=no ;;
+ *) enable_vtable_verify=no;;
+ esac
+else
+ enable_vtable_verify=no
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_vtable_verify" >&5
+$as_echo "$enable_vtable_verify" >&6; }
+
# Record target_configdirs and the configure arguments for target and
# build configuration in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
+bootstrap_fixincludes=no
# If we are building libgomp, bootstrap it.
if echo " ${target_configdirs} " | grep " libgomp " > /dev/null 2>&1 ; then
bootstrap_target_libs=${bootstrap_target_libs}target-libgomp,
fi
+# If we are building libsanitizer and $BUILD_CONFIG contains bootstrap-asan
+# or bootstrap-ubsan, bootstrap it.
+if echo " ${target_configdirs} " | grep " libsanitizer " > /dev/null 2>&1; then
+ case "$BUILD_CONFIG" in
+ *bootstrap-asan* | *bootstrap-ubsan* )
+ bootstrap_target_libs=${bootstrap_target_libs}target-libsanitizer,
+ bootstrap_fixincludes=yes
+ ;;
+ esac
+fi
+
+# If we are building libvtv and --enable-vtable-verify, bootstrap it.
+if echo " ${target_configdirs} " | grep " libvtv " > /dev/null 2>&1 &&
+ test "$enable_vtable_verify" != no; then
+ bootstrap_target_libs=${bootstrap_target_libs}target-libvtv,
+fi
+
+# If we are building libmpx and $BUILD_CONFIG contains bootstrap-mpx,
+# bootstrap it.
+if echo " ${target_configdirs} " | grep " libmpx " > /dev/null 2>&1; then
+ case "$BUILD_CONFIG" in
+ *bootstrap-mpx* )
+ bootstrap_target_libs=${bootstrap_target_libs}target-libmpx,
+ ;;
+ esac
+fi
+
# Determine whether gdb needs tk/tcl or not.
# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
# and in that case we want gdb to be built without tk. Ugh!
;;
esac
-# Adjust the toplevel makefile according to whether bootstrap was selected.
-case $enable_bootstrap in
- yes)
- bootstrap_suffix=bootstrap
- BUILD_CONFIG=bootstrap-debug
- ;;
- no)
- bootstrap_suffix=no-bootstrap
- BUILD_CONFIG=
- ;;
-esac
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for default BUILD_CONFIG" >&5
-$as_echo_n "checking for default BUILD_CONFIG... " >&6; }
-
-
-# Check whether --with-build-config was given.
-if test "${with_build_config+set}" = set; then :
- withval=$with_build_config; case $with_build_config in
- yes) with_build_config= ;;
- no) with_build_config= BUILD_CONFIG= ;;
- esac
-fi
-
-
-if test "x${with_build_config}" != x; then
- BUILD_CONFIG=$with_build_config
-else
- case $BUILD_CONFIG in
- bootstrap-debug)
- if echo "int f (void) { return 0; }" > conftest.c &&
- ${CC} -c conftest.c &&
- mv conftest.o conftest.o.g0 &&
- ${CC} -c -g conftest.c &&
- mv conftest.o conftest.o.g &&
- ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then
- :
- else
- BUILD_CONFIG=
- fi
- rm -f conftest.c conftest.o conftest.o.g0 conftest.o.g
- ;;
- esac
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_CONFIG" >&5
-$as_echo "$BUILD_CONFIG" >&6; }
-
-
extrasub_build=
for module in ${build_configdirs} ; do
if test -z "${no_recursion}" \
fi
done
fi
+ case ${module},${bootstrap_fixincludes} in
+ fixincludes,no) host_bootstrap_suffix=no-bootstrap ;;
+ *) host_bootstrap_suffix=$bootstrap_suffix ;;
+ esac
extrasub_host="$extrasub_host
/^@if $module\$/d
/^@endif $module\$/d
-/^@if $module-$bootstrap_suffix\$/d
-/^@endif $module-$bootstrap_suffix\$/d"
+/^@if $module-$host_bootstrap_suffix\$/d
+/^@endif $module-$host_bootstrap_suffix\$/d"
done
extrasub_target=
for module in ${target_configdirs} ; do
case $lib in
- mpc | mpfr | gmp | ppl | cloog)
+ mpc | mpfr | gmp | isl)
# If we're processing --with-$lib, --with-$lib-include or
# --with-$lib-lib, for one of the libs above, and target is
# different from host, don't pass the current argument to any
# For the build-side libraries, we just need to pretend we're native,
# and not use the same cache file. Multilibs are neither needed nor
-# desired.
-build_configargs="$build_configargs --cache-file=../config.cache ${baseargs}"
+# desired. We can't even use the same cache file for all build-side
+# libraries, as they're compiled differently; some with C, some with
+# C++ or with different feature-enabling options.
+build_configargs="$build_configargs --cache-file=./config.cache ${baseargs}"
# For host modules, accept cache file option, or specification as blank.
case "${cache_file}" in
target_configargs="--with-cross-host=${host_noncanonical} ${target_configargs}"
fi
+# Special user-friendly check for native x86_64-linux build, if
+# multilib is not explicitly enabled.
+case "$target:$have_compiler:$host:$target:$enable_multilib" in
+ x86_64-*linux*:yes:$build:$build:)
+ # Make sure we have a development environment that handles 32-bit
+ dev64=no
+ echo "int main () { return 0; }" > conftest.c
+ ${CC} -m32 -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
+ if test $? = 0 ; then
+ if test -s conftest || test -s conftest.exe ; then
+ dev64=yes
+ fi
+ fi
+ rm -f conftest*
+ if test x${dev64} != xyes ; then
+ as_fn_error "I suspect your system does not have 32-bit development libraries (libc and headers). If you have them, rerun configure with --enable-multilib. If you do not have them, and want to build a 64-bit-only compiler, rerun configure with --disable-multilib." "$LINENO" 5
+ fi
+ ;;
+esac
+
# Default to --enable-multilib.
if test x${enable_multilib} = x ; then
target_configargs="--enable-multilib ${target_configargs}"
*" --with-newlib "*)
case "$target" in
*-cygwin*)
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include'
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -isystem $$s/winsup/cygwin/include'
;;
esac
-
# Generate default definitions for YACC, M4, LEX and other programs that run
# on the build machine. These are used if the Makefile can't locate these
# programs in objdir.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
if test -x $with_build_time_tools/${ncn_progname}; then
- ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- break
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- fi
- done
-fi
-
-if test -z "$ac_cv_prog_GCC_FOR_TARGET"; then
- for ncn_progname in gcc; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_GCC_FOR_TARGET+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$GCC_FOR_TARGET"; then
- ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_GCC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-GCC_FOR_TARGET=$ac_cv_prog_GCC_FOR_TARGET
-if test -n "$GCC_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCC_FOR_TARGET" >&5
-$as_echo "$GCC_FOR_TARGET" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
- if test -z "$ac_cv_prog_GCC_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_GCC_FOR_TARGET+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$GCC_FOR_TARGET"; then
- ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_GCC_FOR_TARGET="${ncn_progname}"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-GCC_FOR_TARGET=$ac_cv_prog_GCC_FOR_TARGET
-if test -n "$GCC_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCC_FOR_TARGET" >&5
-$as_echo "$GCC_FOR_TARGET" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
- test -n "$ac_cv_prog_GCC_FOR_TARGET" && break
- done
-fi
-
-if test -z "$ac_cv_prog_GCC_FOR_TARGET" ; then
- GCC_FOR_TARGET="${CC_FOR_TARGET}"
-else
- GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
-fi
-
-
-
-if test -n "$GCJ_FOR_TARGET"; then
- ac_cv_prog_GCJ_FOR_TARGET=$GCJ_FOR_TARGET
-elif test -n "$ac_cv_prog_GCJ_FOR_TARGET"; then
- GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
-fi
-
-if test -n "$ac_cv_prog_GCJ_FOR_TARGET"; then
- for ncn_progname in gcj; do
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_GCJ_FOR_TARGET+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$GCJ_FOR_TARGET"; then
- ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
-if test -n "$GCJ_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCJ_FOR_TARGET" >&5
-$as_echo "$GCJ_FOR_TARGET" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- done
-fi
-
-if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test -n "$with_build_time_tools"; then
- for ncn_progname in gcj; do
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
-$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
- if test -x $with_build_time_tools/${ncn_progname}; then
- ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
break
done
fi
-if test -z "$ac_cv_prog_GCJ_FOR_TARGET"; then
- for ncn_progname in gcj; do
+if test -z "$ac_cv_prog_GCC_FOR_TARGET"; then
+ for ncn_progname in gcc; do
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_GCJ_FOR_TARGET+set}" = set; then :
+if test "${ac_cv_prog_GCC_FOR_TARGET+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$GCJ_FOR_TARGET"; then
- ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_GCJ_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
-if test -n "$GCJ_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCJ_FOR_TARGET" >&5
-$as_echo "$GCJ_FOR_TARGET" >&6; }
+GCC_FOR_TARGET=$ac_cv_prog_GCC_FOR_TARGET
+if test -n "$GCC_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCC_FOR_TARGET" >&5
+$as_echo "$GCC_FOR_TARGET" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test $build = $target ; then
+ if test -z "$ac_cv_prog_GCC_FOR_TARGET" && test $build = $target ; then
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_GCJ_FOR_TARGET+set}" = set; then :
+if test "${ac_cv_prog_GCC_FOR_TARGET+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$GCJ_FOR_TARGET"; then
- ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_progname}"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-GCJ_FOR_TARGET=$ac_cv_prog_GCJ_FOR_TARGET
-if test -n "$GCJ_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCJ_FOR_TARGET" >&5
-$as_echo "$GCJ_FOR_TARGET" >&6; }
+GCC_FOR_TARGET=$ac_cv_prog_GCC_FOR_TARGET
+if test -n "$GCC_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCC_FOR_TARGET" >&5
+$as_echo "$GCC_FOR_TARGET" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- test -n "$ac_cv_prog_GCJ_FOR_TARGET" && break
+ test -n "$ac_cv_prog_GCC_FOR_TARGET" && break
done
fi
-if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
- set dummy gcj
- if test $build = $target ; then
- GCJ_FOR_TARGET="$2"
- else
- GCJ_FOR_TARGET="${ncn_target_tool_prefix}$2"
- fi
+if test -z "$ac_cv_prog_GCC_FOR_TARGET" ; then
+ GCC_FOR_TARGET="${CC_FOR_TARGET}"
else
- GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+ GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
fi
set dummy ${ncn_progname}; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_LIPO_FOR_TARGET+set}" = set; then :
+if test "${ac_cv_prog_LIPO_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO_FOR_TARGET"; then
+ ac_cv_prog_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_LIPO_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO_FOR_TARGET=$ac_cv_prog_LIPO_FOR_TARGET
+if test -n "$LIPO_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO_FOR_TARGET" >&5
+$as_echo "$LIPO_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ done
+fi
+
+if test -z "$ac_cv_prog_LIPO_FOR_TARGET" && test -n "$with_build_time_tools"; then
+ for ncn_progname in lipo; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
+$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_LIPO_FOR_TARGET"; then
+ for ncn_progname in lipo; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_LIPO_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO_FOR_TARGET"; then
+ ac_cv_prog_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_LIPO_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO_FOR_TARGET=$ac_cv_prog_LIPO_FOR_TARGET
+if test -n "$LIPO_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO_FOR_TARGET" >&5
+$as_echo "$LIPO_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ if test -z "$ac_cv_prog_LIPO_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_LIPO_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO_FOR_TARGET"; then
+ ac_cv_prog_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_LIPO_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO_FOR_TARGET=$ac_cv_prog_LIPO_FOR_TARGET
+if test -n "$LIPO_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO_FOR_TARGET" >&5
+$as_echo "$LIPO_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ test -n "$ac_cv_prog_LIPO_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_LIPO_FOR_TARGET" ; then
+ set dummy lipo
+ if test $build = $target ; then
+ LIPO_FOR_TARGET="$2"
+ else
+ LIPO_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+else
+ LIPO_FOR_TARGET="$ac_cv_prog_LIPO_FOR_TARGET"
+fi
+
+else
+ LIPO_FOR_TARGET=$ac_cv_path_LIPO_FOR_TARGET
+fi
+
+
+
+
+if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for nm in $with_build_time_tools" >&5
+$as_echo_n "checking for nm in $with_build_time_tools... " >&6; }
+ if test -x $with_build_time_tools/nm; then
+ NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/nm
+ ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_NM_FOR_TARGET" >&5
+$as_echo "$ac_cv_path_NM_FOR_TARGET" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ NM_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=nm`
+ test $NM_FOR_TARGET = nm && NM_FOR_TARGET=
+ test -n "$NM_FOR_TARGET" && ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_NM_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+ # Extract the first word of "nm", so it can be a program name with args.
+set dummy nm; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_NM_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $NM_FOR_TARGET in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $gcc_cv_tool_dirs
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_NM_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+NM_FOR_TARGET=$ac_cv_path_NM_FOR_TARGET
+if test -n "$NM_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM_FOR_TARGET" >&5
+$as_echo "$NM_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
+
+
+if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET=$NM_FOR_TARGET
+elif test -n "$ac_cv_prog_NM_FOR_TARGET"; then
+ NM_FOR_TARGET=$ac_cv_prog_NM_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_NM_FOR_TARGET"; then
+ for ncn_progname in nm; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_NM_FOR_TARGET+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$LIPO_FOR_TARGET"; then
- ac_cv_prog_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test.
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_LIPO_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_NM_FOR_TARGET="${ncn_progname}"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-LIPO_FOR_TARGET=$ac_cv_prog_LIPO_FOR_TARGET
-if test -n "$LIPO_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO_FOR_TARGET" >&5
-$as_echo "$LIPO_FOR_TARGET" >&6; }
+NM_FOR_TARGET=$ac_cv_prog_NM_FOR_TARGET
+if test -n "$NM_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM_FOR_TARGET" >&5
+$as_echo "$NM_FOR_TARGET" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
done
fi
-if test -z "$ac_cv_prog_LIPO_FOR_TARGET" && test -n "$with_build_time_tools"; then
- for ncn_progname in lipo; do
+if test -z "$ac_cv_prog_NM_FOR_TARGET" && test -n "$with_build_time_tools"; then
+ for ncn_progname in nm; do
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
if test -x $with_build_time_tools/${ncn_progname}; then
- ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/${ncn_progname}
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
break
done
fi
-if test -z "$ac_cv_prog_LIPO_FOR_TARGET"; then
- for ncn_progname in lipo; do
+if test -z "$ac_cv_prog_NM_FOR_TARGET"; then
+ for ncn_progname in nm; do
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_LIPO_FOR_TARGET+set}" = set; then :
+if test "${ac_cv_prog_NM_FOR_TARGET+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$LIPO_FOR_TARGET"; then
- ac_cv_prog_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test.
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_LIPO_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_NM_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-LIPO_FOR_TARGET=$ac_cv_prog_LIPO_FOR_TARGET
-if test -n "$LIPO_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO_FOR_TARGET" >&5
-$as_echo "$LIPO_FOR_TARGET" >&6; }
+NM_FOR_TARGET=$ac_cv_prog_NM_FOR_TARGET
+if test -n "$NM_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM_FOR_TARGET" >&5
+$as_echo "$NM_FOR_TARGET" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- if test -z "$ac_cv_prog_LIPO_FOR_TARGET" && test $build = $target ; then
+ if test -z "$ac_cv_prog_NM_FOR_TARGET" && test $build = $target ; then
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_LIPO_FOR_TARGET+set}" = set; then :
+if test "${ac_cv_prog_NM_FOR_TARGET+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$LIPO_FOR_TARGET"; then
- ac_cv_prog_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test.
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_LIPO_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_NM_FOR_TARGET="${ncn_progname}"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-LIPO_FOR_TARGET=$ac_cv_prog_LIPO_FOR_TARGET
-if test -n "$LIPO_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO_FOR_TARGET" >&5
-$as_echo "$LIPO_FOR_TARGET" >&6; }
+NM_FOR_TARGET=$ac_cv_prog_NM_FOR_TARGET
+if test -n "$NM_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM_FOR_TARGET" >&5
+$as_echo "$NM_FOR_TARGET" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- test -n "$ac_cv_prog_LIPO_FOR_TARGET" && break
+ test -n "$ac_cv_prog_NM_FOR_TARGET" && break
done
fi
-if test -z "$ac_cv_prog_LIPO_FOR_TARGET" ; then
- set dummy lipo
+if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
+ set dummy nm
if test $build = $target ; then
- LIPO_FOR_TARGET="$2"
+ NM_FOR_TARGET="$2"
else
- LIPO_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ NM_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
else
- LIPO_FOR_TARGET="$ac_cv_prog_LIPO_FOR_TARGET"
+ NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
fi
else
- LIPO_FOR_TARGET=$ac_cv_path_LIPO_FOR_TARGET
+ NM_FOR_TARGET=$ac_cv_path_NM_FOR_TARGET
fi
-if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
+if test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for nm in $with_build_time_tools" >&5
-$as_echo_n "checking for nm in $with_build_time_tools... " >&6; }
- if test -x $with_build_time_tools/nm; then
- NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/nm
- ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_NM_FOR_TARGET" >&5
-$as_echo "$ac_cv_path_NM_FOR_TARGET" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objcopy in $with_build_time_tools" >&5
+$as_echo_n "checking for objcopy in $with_build_time_tools... " >&6; }
+ if test -x $with_build_time_tools/objcopy; then
+ OBJCOPY_FOR_TARGET=`cd $with_build_time_tools && pwd`/objcopy
+ ac_cv_path_OBJCOPY_FOR_TARGET=$OBJCOPY_FOR_TARGET
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_OBJCOPY_FOR_TARGET" >&5
+$as_echo "$ac_cv_path_OBJCOPY_FOR_TARGET" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
elif test $build != $host && test $have_gcc_for_target = yes; then
- NM_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=nm`
- test $NM_FOR_TARGET = nm && NM_FOR_TARGET=
- test -n "$NM_FOR_TARGET" && ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
+ OBJCOPY_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=objcopy`
+ test $OBJCOPY_FOR_TARGET = objcopy && OBJCOPY_FOR_TARGET=
+ test -n "$OBJCOPY_FOR_TARGET" && ac_cv_path_OBJCOPY_FOR_TARGET=$OBJCOPY_FOR_TARGET
fi
fi
-if test -z "$ac_cv_path_NM_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
- # Extract the first word of "nm", so it can be a program name with args.
-set dummy nm; ac_word=$2
+if test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+ # Extract the first word of "objcopy", so it can be a program name with args.
+set dummy objcopy; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_NM_FOR_TARGET+set}" = set; then :
+if test "${ac_cv_path_OBJCOPY_FOR_TARGET+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- case $NM_FOR_TARGET in
+ case $OBJCOPY_FOR_TARGET in
[\\/]* | ?:[\\/]*)
- ac_cv_path_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test with a path.
+ ac_cv_path_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test with a path.
;;
*)
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_NM_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+ ac_cv_path_OBJCOPY_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
;;
esac
fi
-NM_FOR_TARGET=$ac_cv_path_NM_FOR_TARGET
-if test -n "$NM_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM_FOR_TARGET" >&5
-$as_echo "$NM_FOR_TARGET" >&6; }
+OBJCOPY_FOR_TARGET=$ac_cv_path_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
-if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
+if test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" ; then
-if test -n "$NM_FOR_TARGET"; then
- ac_cv_prog_NM_FOR_TARGET=$NM_FOR_TARGET
-elif test -n "$ac_cv_prog_NM_FOR_TARGET"; then
- NM_FOR_TARGET=$ac_cv_prog_NM_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET=$OBJCOPY_FOR_TARGET
+elif test -n "$ac_cv_prog_OBJCOPY_FOR_TARGET"; then
+ OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
fi
-if test -n "$ac_cv_prog_NM_FOR_TARGET"; then
- for ncn_progname in nm; do
+if test -n "$ac_cv_prog_OBJCOPY_FOR_TARGET"; then
+ for ncn_progname in objcopy; do
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_NM_FOR_TARGET+set}" = set; then :
+if test "${ac_cv_prog_OBJCOPY_FOR_TARGET+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$NM_FOR_TARGET"; then
- ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
+ if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_NM_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_OBJCOPY_FOR_TARGET="${ncn_progname}"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-NM_FOR_TARGET=$ac_cv_prog_NM_FOR_TARGET
-if test -n "$NM_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM_FOR_TARGET" >&5
-$as_echo "$NM_FOR_TARGET" >&6; }
+OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
done
fi
-if test -z "$ac_cv_prog_NM_FOR_TARGET" && test -n "$with_build_time_tools"; then
- for ncn_progname in nm; do
+if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET" && test -n "$with_build_time_tools"; then
+ for ncn_progname in objcopy; do
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
if test -x $with_build_time_tools/${ncn_progname}; then
- ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ ac_cv_prog_OBJCOPY_FOR_TARGET=$with_build_time_tools/${ncn_progname}
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
break
done
fi
-if test -z "$ac_cv_prog_NM_FOR_TARGET"; then
- for ncn_progname in nm; do
+if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET"; then
+ for ncn_progname in objcopy; do
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_NM_FOR_TARGET+set}" = set; then :
+if test "${ac_cv_prog_OBJCOPY_FOR_TARGET+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$NM_FOR_TARGET"; then
- ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
+ if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_NM_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_OBJCOPY_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-NM_FOR_TARGET=$ac_cv_prog_NM_FOR_TARGET
-if test -n "$NM_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM_FOR_TARGET" >&5
-$as_echo "$NM_FOR_TARGET" >&6; }
+OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- if test -z "$ac_cv_prog_NM_FOR_TARGET" && test $build = $target ; then
+ if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET" && test $build = $target ; then
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_NM_FOR_TARGET+set}" = set; then :
+if test "${ac_cv_prog_OBJCOPY_FOR_TARGET+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$NM_FOR_TARGET"; then
- ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
+ if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_NM_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_OBJCOPY_FOR_TARGET="${ncn_progname}"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
fi
fi
-NM_FOR_TARGET=$ac_cv_prog_NM_FOR_TARGET
-if test -n "$NM_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM_FOR_TARGET" >&5
-$as_echo "$NM_FOR_TARGET" >&6; }
+OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- test -n "$ac_cv_prog_NM_FOR_TARGET" && break
+ test -n "$ac_cv_prog_OBJCOPY_FOR_TARGET" && break
done
fi
-if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
- set dummy nm
+if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET" ; then
+ set dummy objcopy
if test $build = $target ; then
- NM_FOR_TARGET="$2"
+ OBJCOPY_FOR_TARGET="$2"
else
- NM_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ OBJCOPY_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
else
- NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
+ OBJCOPY_FOR_TARGET="$ac_cv_prog_OBJCOPY_FOR_TARGET"
fi
else
- NM_FOR_TARGET=$ac_cv_path_NM_FOR_TARGET
+ OBJCOPY_FOR_TARGET=$ac_cv_path_OBJCOPY_FOR_TARGET
fi
esac
if test $ok = yes; then
# An in-tree tool is available and we can use it
- CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+ CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xg++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/libsupc++/.libs'
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
$as_echo "just compiled" >&6; }
elif expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
esac
if test $ok = yes; then
# An in-tree tool is available and we can use it
- RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+ RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/libsupc++/.libs'
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
$as_echo "just compiled" >&6; }
elif expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
fi
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target gcj" >&5
-$as_echo_n "checking where to find the target gcj... " >&6; }
-if test "x${build}" != "x${host}" ; then
- if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
- # We already found the complete path
- ac_dir=`dirname $GCJ_FOR_TARGET`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
-$as_echo "pre-installed in $ac_dir" >&6; }
- else
- # Canadian cross, just use what we found
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
-$as_echo "pre-installed" >&6; }
- fi
-else
- ok=yes
- case " ${configdirs} " in
- *" gcc "*) ;;
- *) ok=no ;;
- esac
- case ,${enable_languages}, in
- *,java,*) ;;
- *) ok=no ;;
- esac
- if test $ok = yes; then
- # An in-tree tool is available and we can use it
- GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
-$as_echo "just compiled" >&6; }
- elif expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
- # We already found the complete path
- ac_dir=`dirname $GCJ_FOR_TARGET`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
-$as_echo "pre-installed in $ac_dir" >&6; }
- elif test "x$target" = "x$host"; then
- # We can use an host tool
- GCJ_FOR_TARGET='$(GCJ)'
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
-$as_echo "host tool" >&6; }
- else
- # We need a cross tool
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
-$as_echo "pre-installed" >&6; }
- fi
-fi
-
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target gfortran" >&5
$as_echo_n "checking where to find the target gfortran... " >&6; }
if test "x${build}" != "x${host}" ; then
fi
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target objcopy" >&5
+$as_echo_n "checking where to find the target objcopy... " >&6; }
+if test "x${build}" != "x${host}" ; then
+ if expr "x$OBJCOPY_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $OBJCOPY_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ else
+ # Canadian cross, just use what we found
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ OBJCOPY_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/objcopy'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
+$as_echo "just compiled" >&6; }
+ elif expr "x$OBJCOPY_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $OBJCOPY_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ OBJCOPY_FOR_TARGET='$(OBJCOPY)'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
+$as_echo "host tool" >&6; }
+ else
+ # We need a cross tool
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target objdump" >&5
$as_echo_n "checking where to find the target objdump... " >&6; }
if test "x${build}" != "x${host}" ; then
esac ;;
esac
-# This is aimed to mimic bootstrap with a non-GCC compiler to catch problems.
-if test "$GCC" = yes -a "$ENABLE_BUILD_WITH_CXX" != yes; then
- saved_CFLAGS="$CFLAGS"
-
- # Pass -fkeep-inline-functions for stage 1 if the GCC version supports it.
- CFLAGS="$CFLAGS -fkeep-inline-functions"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -fkeep-inline-functions is supported" >&5
-$as_echo_n "checking whether -fkeep-inline-functions is supported... " >&6; }
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#if (__GNUC__ < 3) \
- || (__GNUC__ == 3 && (__GNUC_MINOR__ < 3 \
- || (__GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ < 1)))
-#error http://gcc.gnu.org/PR29382
-#endif
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }; stage1_cflags="$stage1_cflags -fkeep-inline-functions"
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
- CFLAGS="$saved_CFLAGS"
-fi
-
# Enable --enable-checking in stage1 of the compiler.
enableval=$enable_stage1_checking; stage1_checking=--enable-checking=${enable_stage1_checking}
else
if test "x$enable_checking" = xno || test "x$enable_checking" = x; then
- stage1_checking=--enable-checking=yes,types
+ # For --disable-checking or implicit --enable-checking=release, avoid
+ # setting --enable-checking=gc in the default stage1 checking for LTO
+ # bootstraps. See PR62077.
+ case $BUILD_CONFIG in
+ *lto*)
+ stage1_checking=--enable-checking=release,misc,gimple,rtlflag,tree,types;;
+ *)
+ stage1_checking=--enable-checking=yes,types;;
+ esac
+ if test "x$enable_checking" = x && \
+ test -d ${srcdir}/gcc && \
+ test x"`cat ${srcdir}/gcc/DEV-PHASE`" = xexperimental; then
+ stage1_checking=--enable-checking=yes,types,extra
+ fi
else
stage1_checking=--enable-checking=$enable_checking,types
fi
esac
-# If using ENABLE_BUILD_POSTSTAGE1_WITH_CXX, pass
-# --enable-build-with-cxx after stage1.
-if test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
- POSTSTAGE1_CONFIGURE_FLAGS=--enable-build-with-cxx
+# Enable --enable-host-shared.
+# Check whether --enable-host-shared was given.
+if test "${enable_host_shared+set}" = set; then :
+ enableval=$enable_host_shared; host_shared=$enableval
else
- POSTSTAGE1_CONFIGURE_FLAGS=
+ host_shared=no
fi
+
+# PR jit/64780: Require the user to explicitly specify
+# --enable-host-shared if the jit is enabled, hinting
+# that they might want to do a separate configure/build of
+# the jit, to avoid users from slowing down the rest of the
+# compiler by enabling the jit.
+if test ${host_shared} = "no" ; then
+ case "${enable_languages}" in
+ *jit*)
+ as_fn_error "
+Enabling language \"jit\" requires --enable-host-shared.
+
+--enable-host-shared typically slows the rest of the compiler down by
+a few %, so you must explicitly enable it.
+
+If you want to build both the jit and the regular compiler, it is often
+best to do this via two separate configure/builds, in separate
+directories, to avoid imposing the performance cost of
+--enable-host-shared on the regular compiler." "$LINENO" 5
+ ;;
+ *)
+ ;;
+ esac
+fi
+
# Specify what files to not compare during bootstrap.
compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
case "$target" in
hppa*64*-*-hpux*) ;;
hppa*-*-hpux*) compare_exclusions="gcc/cc*-checksum\$(objext) | */libgcc/lib2funcs* | gcc/ada/*tools/*" ;;
-esac
-case " $configdirs " in
-*" ppl "*) compare_exclusions="$compare_exclusions | ppl/src/ppl-config.o" ;;
+ powerpc*-ibm-aix*) compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/* | *libgomp*\$(objext)" ;;
esac