* elf32-xtensa.c (property_table_compare): Remove assertion about

[deliverable/binutils-gdb.git] / configure

diff --git a/configure b/configure
index 82d009d6834000c9efc83a2b1f9552f014ff24c5..2170d1bfd401139fa155fcc9edc492f138a57f94 100755 (executable)
--- a/configure
+++ b/configure
@@ -903,7 +903,7 @@ host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib l
 # know that we are building the simulator.
 # binutils, gas and ld appear in that order because it makes sense to run
 # "make check" in that particular order.
-host_tools="texinfo byacc flex bison binutils gas ld gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
+host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
 
 # libgcj represents the runtime libraries only used by gcj.
 libgcj="target-libffi \
@@ -1433,7 +1433,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libstdc++-v3"
     ;;
   mmix-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss"
+    noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss target-libgfortran"
     ;;
   mn10200-*-*)
     noconfigdirs="$noconfigdirs ${libgcj}"
@@ -3040,10 +3040,25 @@ case "${host}" in
   ;;
 esac
 
+# If no --enable-shared nor --disable-shared is specified, we set up
+# LD_LIBRARY_PATH when we build for gcc.
+case $enable_shared in
+"")
+  if test -d ${srcdir}/gcc; then
+    set_lib_path=yes
+  else 
+    set_lib_path=no
+  fi
+  ;;
+*)
+  set_lib_path=$enable_shared
+  ;;
+esac
+
 # If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
 # binutils tools will find libbfd.so.
-case "${enable_shared}" in
-  no | "") SET_LIB_PATH= ;;
+case "${set_lib_path}" in
+  no) SET_LIB_PATH= ;;
   *) SET_LIB_PATH="\$(REALLY_SET_LIB_PATH)" ;;
 esac
 
@@ -3577,7 +3592,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
   # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3581: checking for $ac_word" >&5
+echo "configure:3596: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3610,7 +3625,7 @@ if test -z "$ac_cv_prog_AR" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3614: checking for $ac_word" >&5
+echo "configure:3629: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3649,7 +3664,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3653: checking for $ac_word" >&5
+echo "configure:3668: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3682,7 +3697,7 @@ if test -z "$ac_cv_prog_AS" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3686: checking for $ac_word" >&5
+echo "configure:3701: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3721,7 +3736,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3725: checking for $ac_word" >&5
+echo "configure:3740: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3754,7 +3769,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3758: checking for $ac_word" >&5
+echo "configure:3773: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3793,7 +3808,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3797: checking for $ac_word" >&5
+echo "configure:3812: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3826,7 +3841,7 @@ if test -z "$ac_cv_prog_LD" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3830: checking for $ac_word" >&5
+echo "configure:3845: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3865,7 +3880,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3869: checking for $ac_word" >&5
+echo "configure:3884: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3898,7 +3913,7 @@ if test -z "$ac_cv_prog_NM" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3902: checking for $ac_word" >&5
+echo "configure:3917: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3937,7 +3952,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3941: checking for $ac_word" >&5
+echo "configure:3956: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3970,7 +3985,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3974: checking for $ac_word" >&5
+echo "configure:3989: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4009,7 +4024,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4013: checking for $ac_word" >&5
+echo "configure:4028: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4042,7 +4057,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4046: checking for $ac_word" >&5
+echo "configure:4061: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4081,7 +4096,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4085: checking for $ac_word" >&5
+echo "configure:4100: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4114,7 +4129,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then
     # Extract the first word of "objcopy", so it can be a program name with args.
 set dummy objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4118: checking for $ac_word" >&5
+echo "configure:4133: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4153,7 +4168,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4157: checking for $ac_word" >&5
+echo "configure:4172: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4186,7 +4201,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then
     # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4190: checking for $ac_word" >&5
+echo "configure:4205: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4232,7 +4247,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4236: checking for $ac_word" >&5
+echo "configure:4251: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4265,7 +4280,7 @@ if test -z "$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4269: checking for $ac_word" >&5
+echo "configure:4284: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4304,7 +4319,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4308: checking for $ac_word" >&5
+echo "configure:4323: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4337,7 +4352,7 @@ if test -z "$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4341: checking for $ac_word" >&5
+echo "configure:4356: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4376,7 +4391,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4380: checking for $ac_word" >&5
+echo "configure:4395: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4409,7 +4424,7 @@ if test -z "$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4413: checking for $ac_word" >&5
+echo "configure:4428: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4448,7 +4463,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4452: checking for $ac_word" >&5
+echo "configure:4467: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4481,7 +4496,7 @@ if test -z "$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4485: checking for $ac_word" >&5
+echo "configure:4500: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4520,7 +4535,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4524: checking for $ac_word" >&5
+echo "configure:4539: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4553,7 +4568,7 @@ if test -z "$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4557: checking for $ac_word" >&5
+echo "configure:4572: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4592,7 +4607,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4596: checking for $ac_word" >&5
+echo "configure:4611: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4625,7 +4640,7 @@ if test -z "$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4629: checking for $ac_word" >&5
+echo "configure:4644: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4664,7 +4679,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4668: checking for $ac_word" >&5
+echo "configure:4683: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4697,7 +4712,7 @@ if test -z "$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4701: checking for $ac_word" >&5
+echo "configure:4716: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4782,7 +4797,7 @@ RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
 NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4786: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4801: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -4829,7 +4844,7 @@ esac
 # gcc for stageN-gcc and stagePREV-gcc for stage(N-1).  In case this is not
 # possible, however, we can resort to mv.
 echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:4833: checking if symbolic links between directories work" >&5
+echo "configure:4848: checking if symbolic links between directories work" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4882,8 +4897,8 @@ esac
 # used.
 SET_GCC_LIB_PATH=
 if test -d ${srcdir}/gcc && test x${is_cross_compiler} = xno; then
-  case "${enable_shared}" in
-    no | "") ;;
+  case "${set_lib_path}" in
+    no) ;;
     *)
       eval "d=\$$RPATH_ENVVAR"
       if test x"$d" != x; then