-# clear some things potentially inherited from environment.
-
-enable_libstdcxx_v3=yes
-floating_point=default
-gas=default
-x11=default
-
### we might need to use some other shell than /bin/sh for running subshells
### If we are on Windows, search for the shell. This will permit people
### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
;;
i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
- ;;
+ ;;
i[3456]86-*-mingw32*)
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
- noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
- ;;
+ noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
+ ;;
i[3456]86-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
- ;;
+ noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
+ ;;
*-*-cygwin*)
- noconfigdirs="autoconf automake send-pr rcs guile perl"
+ noconfigdirs="autoconf automake send-pr rcs guile perl"
;;
*-*-netbsd*)
noconfigdirs="rcs"
;;
ppc*-*-pe)
- noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
+ noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
;;
powerpc-*-beos*)
noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
# This section makes it possible to build newlib natively on linux.
# If we are using a cross compiler then don't configure newlib.
if test x${is_cross_compiler} != xno ; then
- noconfigdirs="$noconfigdirs target-newlib"
+ noconfigdirs="$noconfigdirs target-newlib"
fi
noconfigdirs="$noconfigdirs target-libgloss"
# If we are not using a cross compiler, do configure newlib.
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
i[3456]86-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
- ;;
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
+ ;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
;;
mipstx39-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}" # same as generic mips
- ;;
+ ;;
mips*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
# go away some day.
# NB: embedded tabs in this IF block -- do not untabify
if test x"${enable_languages+set}" != xset; then
- if test x"${LANGUAGES+set}" = xset; then
- enable_languages="${LANGUAGES}"
- echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
- else
- enable_languages=all
- fi
+ if test x"${LANGUAGES+set}" = xset; then
+ enable_languages="${LANGUAGES}"
+ echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
+ else
+ enable_languages=all
+ fi
else
- if test x"${enable_languages}" = x ||
- test x"${enable_languages}" = xyes;
- then
- echo configure.in: --enable-languages needs at least one language argument 1>&2
- exit 1
- fi
+ if test x"${enable_languages}" = x ||
+ test x"${enable_languages}" = xyes;
+ then
+ echo configure.in: --enable-languages needs at least one language argument 1>&2
+ exit 1
+ fi
fi
enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
# front ends it requires, even if some are required indirectly.
for lang in ${srcdir}/gcc/*/config-lang.in ..
do
- case $lang in
- ..)
- ;;
+ case $lang in
+ ..) ;;
# The odd quoting in the next line works around
# an apparent bug in bash 1.12 on linux.
- ${srcdir}/gcc/[*]/config-lang.in)
- ;;
+ ${srcdir}/gcc/[*]/config-lang.in) ;;
*)
- lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
- this_lang_requires=`sed -n -e 's,^lang_requires=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_requires=\([^ ]*\).*$,\1,p' $lang`
- for other in $this_lang_requires
- do
- case ,${enable_languages}, in
- *,$other,*)
- ;;
- *,all,*)
- ;;
- *,$lang_alias,*)
- echo " \`$other' language required by \`$lang_alias'; enabling" 1>&2
- enable_languages="$enable_languages,$other"
- ;;
- esac
- done
- ;;
- esac
+ lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
+ this_lang_requires=`sed -n -e 's,^lang_requires=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_requires=\([^ ]*\).*$,\1,p' $lang`
+ for other in $this_lang_requires
+ do
+ case ,${enable_languages}, in
+ *,$other,*) ;;
+ *,all,*) ;;
+ *,$lang_alias,*)
+ echo " \`$other' language required by \`$lang_alias'; enabling" 1>&2
+ enable_languages="$enable_languages,$other"
+ ;;
+ esac
+ done
+ ;;
+ esac
done
subdirs=
for lang in ${srcdir}/gcc/*/config-lang.in ..
do
- case $lang in
- ..) ;;
- # The odd quoting in the next line works around
- # an apparent bug in bash 1.12 on linux.
- ${srcdir}/gcc/[*]/config-lang.in) ;;
- *)
- lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
- this_lang_libs=`sed -n -e 's,^target_libs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^target_libs=\([^ ]*\).*$,\1,p' $lang`
- this_lang_dirs=`sed -n -e 's,^lang_dirs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_dirs=\([^ ]*\).*$,\1,p' $lang`
- build_by_default=`sed -n -e 's,^build_by_default=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^build_by_default=\([^ ]*\).*$,\1,p' $lang`
- if test "x$lang_alias" = x
- then
- echo "$lang doesn't set \$language." 1>&2
- exit 1
- fi
- case ${build_by_default},${enable_languages}, in
- *,$lang_alias,*) add_this_lang=yes ;;
- no,*) add_this_lang=no ;;
- *,all,*) add_this_lang=yes ;;
- *) add_this_lang=no ;;
- esac
- if test x"${add_this_lang}" = xyes; then
- eval target_libs='"$target_libs "'\"$this_lang_libs\"
- else
- eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs $this_lang_dirs\"
- fi
- ;;
- esac
+ case $lang in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in) ;;
+ *)
+ lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
+ this_lang_libs=`sed -n -e 's,^target_libs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^target_libs=\([^ ]*\).*$,\1,p' $lang`
+ this_lang_dirs=`sed -n -e 's,^lang_dirs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_dirs=\([^ ]*\).*$,\1,p' $lang`
+ build_by_default=`sed -n -e 's,^build_by_default=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^build_by_default=\([^ ]*\).*$,\1,p' $lang`
+ if test "x$lang_alias" = x
+ then
+ echo "$lang doesn't set \$language." 1>&2
+ exit 1
+ fi
+ case ${build_by_default},${enable_languages}, in
+ *,$lang_alias,*) add_this_lang=yes ;;
+ no,*) add_this_lang=no ;;
+ *,all,*) add_this_lang=yes ;;
+ *) add_this_lang=no ;;
+ esac
+ if test x"${add_this_lang}" = xyes; then
+ eval target_libs='"$target_libs "'\"$this_lang_libs\"
+ else
+ eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs $this_lang_dirs\"
+ fi
+ ;;
+ esac
done
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
esac
fi
-# record if we want runtime library stuff installed in libsubdir.
-# Blank means no.
-if test -z "${enable_version_specific_runtime_libs}"; then
- enable_version_specific_runtime_libs=no
-fi
-
# Make sure that the compiler is able to generate an executable. If it
# can't, we are probably in trouble. We don't care whether we can run the
# executable--we might be using a cross compiler--we only care whether it
# Note, if you change the default, make sure to fix both here and in
# the gcc and libstdc++-v3 subdirectories.
# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
-gxx_include_dir=
-if test -n "${with_gxx_include_dir}"; then
- case "${with_gxx_include_dir}" in
- yes )
- echo "configure.in: error: bad value ${withval} given for g++ include directory" 1>&2
- exit 1
- ;;
- no )
- ;;
- * )
- gxx_include_dir=${with_gxx_include_dir}
- ;;
- esac
-fi
-if test x${gxx_include_dir} = x; then
- if test x${enable_version_specific_runtime_libs} = xyes; then
- gxx_include_dir='${libsubdir}/include/c++'
- else
- . ${srcdir}/config.if
- gxx_include_dir='${prefix}/include/${libstdcxx_incdir}'
- fi
-else
- gxx_include_dir=${gxx_include_dir}
-fi
+case "${with_gxx_include_dir}" in
+ yes)
+ { echo "configure: error: --with-gxx-include-dir=[dir] requires a directory" 1>&2; exit 1; }
+ ;;
+ no | "")
+ case "${enable_version_specific_runtime_libs}" in
+ yes) gxx_include_dir='${libsubdir}/include/c++' ;;
+ *)
+ . ${srcdir}/config.if
+ gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
+ esac ;;
+ *) gxx_include_dir=${with_gxx_include_dir} ;;
+esac
FLAGS_FOR_TARGET=
case " $target_configdirs " in
# being built; programs in there won't even run.
if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
# Search for pre-installed headers if nothing else fits.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include'
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
fi
if test "x${use_gnu_ld}" = x &&
-
# Build module lists & subconfigure args.
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2716: checking for $ac_word" >&5
+echo "configure:2687: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2749: checking for $ac_word" >&5
+echo "configure:2720: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2788: checking for $ac_word" >&5
+echo "configure:2759: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2821: checking for $ac_word" >&5
+echo "configure:2792: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2860: checking for $ac_word" >&5
+echo "configure:2831: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2893: checking for $ac_word" >&5
+echo "configure:2864: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2932: checking for $ac_word" >&5
+echo "configure:2903: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2965: checking for $ac_word" >&5
+echo "configure:2936: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3004: checking for $ac_word" >&5
+echo "configure:2975: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3037: checking for $ac_word" >&5
+echo "configure:3008: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3076: checking for $ac_word" >&5
+echo "configure:3047: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3109: checking for $ac_word" >&5
+echo "configure:3080: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3148: checking for $ac_word" >&5
+echo "configure:3119: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3181: checking for $ac_word" >&5
+echo "configure:3152: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3220: checking for $ac_word" >&5
+echo "configure:3191: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3253: checking for $ac_word" >&5
+echo "configure:3224: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3292: checking for $ac_word" >&5
+echo "configure:3263: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3325: checking for $ac_word" >&5
+echo "configure:3296: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3373: checking for $ac_word" >&5
+echo "configure:3344: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3406: checking for $ac_word" >&5
+echo "configure:3377: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3445: checking for $ac_word" >&5
+echo "configure:3416: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3478: checking for $ac_word" >&5
+echo "configure:3449: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3517: checking for $ac_word" >&5
+echo "configure:3488: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3550: checking for $ac_word" >&5
+echo "configure:3521: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3589: checking for $ac_word" >&5
+echo "configure:3560: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3622: checking for $ac_word" >&5
+echo "configure:3593: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3661: checking for $ac_word" >&5
+echo "configure:3632: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3694: checking for $ac_word" >&5
+echo "configure:3665: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3733: checking for $ac_word" >&5
+echo "configure:3704: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3766: checking for $ac_word" >&5
+echo "configure:3737: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3805: checking for $ac_word" >&5
+echo "configure:3776: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3838: checking for $ac_word" >&5
+echo "configure:3809: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:3905: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:3876: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
s%@BUILD_PREFIX@%$BUILD_PREFIX%g
s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g
s%@configlinks@%$configlinks%g
-s%@enable_version_specific_runtime_libs@%$enable_version_specific_runtime_libs%g
s%@gcc_version_trigger@%$gcc_version_trigger%g
s%@gcc_version@%$gcc_version%g
s%@tooldir@%$tooldir%g