*** empty log message ***

[deliverable/binutils-gdb.git] / configure

diff --git a/configure b/configure
index 7f4c2f1f022267cf1bacc0cf9a9b91715d6e4d69..44e68bdc76a29ff4b9e6c9ed65871730accad687 100755 (executable)
--- a/configure
+++ b/configure
@@ -1082,6 +1082,9 @@ case "${target}" in
     # newlib is not 64 bit ready
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
+  am33_2.0-*-linux*)
+    noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+    ;;
   sh-*-linux*)
     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
     ;;    
@@ -1395,6 +1398,9 @@ case "${target}" in
   vax-*-*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
+  xtensa-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
   ip2k-*-*)
     noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
@@ -2708,7 +2714,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
   # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2712: checking for $ac_word" >&5
+echo "configure:2718: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2741,7 +2747,7 @@ if test -z "$ac_cv_prog_AR" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2745: checking for $ac_word" >&5
+echo "configure:2751: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2780,7 +2786,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2784: checking for $ac_word" >&5
+echo "configure:2790: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2813,7 +2819,7 @@ if test -z "$ac_cv_prog_AS" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2817: checking for $ac_word" >&5
+echo "configure:2823: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2852,7 +2858,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2856: checking for $ac_word" >&5
+echo "configure:2862: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2885,7 +2891,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2889: checking for $ac_word" >&5
+echo "configure:2895: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2924,7 +2930,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2928: checking for $ac_word" >&5
+echo "configure:2934: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2957,7 +2963,7 @@ if test -z "$ac_cv_prog_LD" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2961: checking for $ac_word" >&5
+echo "configure:2967: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2996,7 +3002,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3000: checking for $ac_word" >&5
+echo "configure:3006: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3029,7 +3035,7 @@ if test -z "$ac_cv_prog_NM" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3033: checking for $ac_word" >&5
+echo "configure:3039: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3068,7 +3074,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3072: checking for $ac_word" >&5
+echo "configure:3078: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3101,7 +3107,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3105: checking for $ac_word" >&5
+echo "configure:3111: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3140,7 +3146,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3144: checking for $ac_word" >&5
+echo "configure:3150: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3173,7 +3179,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3177: checking for $ac_word" >&5
+echo "configure:3183: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3212,7 +3218,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3216: checking for $ac_word" >&5
+echo "configure:3222: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3245,7 +3251,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then
     # Extract the first word of "objcopy", so it can be a program name with args.
 set dummy objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3249: checking for $ac_word" >&5
+echo "configure:3255: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3284,7 +3290,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3288: checking for $ac_word" >&5
+echo "configure:3294: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3317,7 +3323,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then
     # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3321: checking for $ac_word" >&5
+echo "configure:3327: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3365,7 +3371,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3369: checking for $ac_word" >&5
+echo "configure:3375: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3398,7 +3404,7 @@ if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3402: checking for $ac_word" >&5
+echo "configure:3408: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3437,7 +3443,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3441: checking for $ac_word" >&5
+echo "configure:3447: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3470,7 +3476,7 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3474: checking for $ac_word" >&5
+echo "configure:3480: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3509,7 +3515,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3513: checking for $ac_word" >&5
+echo "configure:3519: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3542,7 +3548,7 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3546: checking for $ac_word" >&5
+echo "configure:3552: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3581,7 +3587,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3585: checking for $ac_word" >&5
+echo "configure:3591: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3614,7 +3620,7 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3618: checking for $ac_word" >&5
+echo "configure:3624: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3653,7 +3659,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3657: checking for $ac_word" >&5
+echo "configure:3663: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3686,7 +3692,7 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3690: checking for $ac_word" >&5
+echo "configure:3696: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3725,7 +3731,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3729: checking for $ac_word" >&5
+echo "configure:3735: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3758,7 +3764,7 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3762: checking for $ac_word" >&5
+echo "configure:3768: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3797,7 +3803,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3801: checking for $ac_word" >&5
+echo "configure:3807: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3830,7 +3836,7 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3834: checking for $ac_word" >&5
+echo "configure:3840: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3897,7 +3903,7 @@ RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
 NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:3901: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:3907: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -3984,15 +3990,34 @@ trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
 # Transform confdefs.h into DEFS.
 # Protect against shell expansion while executing Makefile rules.
 # Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[    `~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[   ]*#[    ]*define[       ][      ]*\([^  (][^    (]*([^)]*)\)[   ]*\(.*\),-D\1=\2,g
+t quote
+s,^[   ]*#[    ]*define[       ][      ]*\([^  ][^     ]*\)[   ]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[    `~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output.  A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
 
 
 # Without the "./", some shells look in PATH for config.status.