CC_FOR_BUILD
AS_FOR_BUILD
AR_FOR_BUILD
-target_configargs
target_configdirs
configdirs
-host_configargs
build_configdirs
-build_configargs
INSTALL_GDB_TK
GDB_TK
CONFIGURE_GDB_TK
tooldir
GCC_SHLIB_SUBDIR
RPATH_ENVVAR
+target_configargs
+host_configargs
+build_configargs
BUILD_CONFIG
CXXFLAGS_FOR_TARGET
CFLAGS_FOR_TARGET
CXXFLAGS
CCC
CPP
+build_configargs
+host_configargs
+target_configargs
AR
AS
DLLTOOL
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CPP C preprocessor
+ build_configargs
+ additional configure arguments for build directories
+ host_configargs
+ additional configure arguments for host directories
+ target_configargs
+ additional configure arguments for target directories
AR AR for the host
AS AS for the host
DLLTOOL DLLTOOL for the host
configdirs="$configdirs gold"
;;
*)
- configdirs="`echo " ${configdirs} " | sed -e 's/ ld / gold /'`"
+ configdirs=`echo " ${configdirs} " | sed -e 's/ ld / gold /'`
;;
esac
ENABLE_GOLD=yes
noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
;;
*-*-rtems*)
+ skipdirs="${skipdirs} target-libiberty"
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
# The tpf target doesn't support gdb yet.
noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
;;
microblaze*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libssp ${libgcj}"
;;
mips*-sde-elf*)
skipdirs="$skipdirs target-libiberty"
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
;;
- v850-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- v850e-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- v850ea-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ v850*-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
vax-*-vms)
noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
if test "x$with_gmp$with_gmp_include$with_gmp_lib" = x && test -d ${srcdir}/gmp; then
gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir $gmplibs"
gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc"
- extra_mpfr_configure_flags='--with-gmp-build=$$r/$(HOST_SUBDIR)/gmp'
+ extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
# Do not test the gmp version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
# Check for the recommended and required versions of GMP.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for the correct version of gmp.h" >&5
$as_echo_n "checking for the correct version of gmp.h... " >&6; }
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include "gmp.h"
int
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include <gmp.h>
int
# Check for PPL
-ppl_major_version=0
-ppl_minor_version=10
ppllibs=" -lppl_c -lppl -lgmpxx"
pplinc=
if test "x$with_ppl" != "xno" -a "${ENABLE_PPL_CHECK}" = "yes"; then
saved_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $pplinc $gmpinc"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version $ppl_major_version.$ppl_minor_version of PPL" >&5
-$as_echo_n "checking for version $ppl_major_version.$ppl_minor_version of PPL... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for version 0.10 (or later revision) of PPL" >&5
+$as_echo_n "checking for version 0.10 (or later revision) of PPL... " >&6; }
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include "ppl_c.h"
main ()
{
- #if PPL_VERSION_MAJOR != $ppl_major_version || PPL_VERSION_MINOR != $ppl_minor_version
+ #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 10
choke me
#endif
return 0;
}
_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include "cloog/cloog.h"
+int
+main ()
+{
+
+ #if CLOOG_VERSION_MAJOR != 0 || CLOOG_VERSION_MINOR != 15 || CLOOG_VERSION_REVISION < 9
+ choke me
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: buggy but acceptable" >&5
+$as_echo "buggy but acceptable" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }; clooglibs= ; clooginc=
case $target in
*-darwin* | *-aix* | *-cygwin* | *-mingw* | *-aout* | *-*coff* | \
*-msdosdjgpp* | *-netware* | *-vms* | *-wince* | *-*-pe* | \
- alpha*-dec-osf* | *-interix*)
+ alpha*-dec-osf* | *-interix* | hppa[12]*-*-hpux*)
target_elf=no
;;
*)
elf_nextscn (0, 0);
elf_strptr (0, 0, 0);
elf_getident (0, 0);
- elf_getshdrstrndx (0, 0);
elf_begin (0, 0, 0);
elf_ndxscn (0);
elf_end (0);
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
+ # Check for elf_getshdrstrndx or elf_getshstrndx. The latter's flavor
+ # is determined in gcc/configure.ac.
+ if test x"$enable_lto" = x"yes" ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for elf_getshdrstrndx" >&5
+$as_echo_n "checking for elf_getshdrstrndx... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <libelf.h>
+int
+main ()
+{
+
+ elf_getshdrstrndx (0, 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; };
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; };
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for elf_getshstrndx" >&5
+$as_echo_n "checking for elf_getshstrndx... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <libelf.h>
+int
+main ()
+{
+
+ elf_getshstrndx (0, 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; };
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }; enable_lto=no; libelflibs= ; libelfinc=
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+
# If we couldn't enable LTO and the user forced it, emit an error.
if test x"$enable_lto" = x"no" \
&& test x"$default_enable_lto" != x"yes" ; then
fi
else
if test x"$default_enable_lto" = x"yes" ; then
- # On non-ELF platforms, LTO must be explicitly enabled.
- enable_lto=no
+ case $target in
+ *-apple-darwin*) ;;
+ # On other non-ELF platforms, LTO must be explicitly enabled.
+ *) enable_lto=no ;;
+ esac
else
- # Apart from ELF platforms, only Windows supports LTO so far. It
- # would also be nice to check the binutils support, but we don't
+ # Apart from ELF platforms, only Windows and Darwin support LTO so far.
+ # It would also be nice to check the binutils support, but we don't
# have gcc_GAS_CHECK_FEATURE available here. For now, we'll just
# warn during gcc/ subconfigure; unless you're bootstrapping with
# -flto it won't be needed until after installation anyway.
case $target in
- *-cygwin*|*-mingw*) ;;
- *-apple-darwin*) ;;
+ *-cygwin*|*-mingw* | *-apple-darwin*) ;;
*) if test x"$enable_lto" = x"yes"; then
as_fn_error "LTO support is not enabled for this target." "$LINENO" 5
fi
mv conftest.o conftest.o.g0 &&
${CC} -c -g conftest.c &&
mv conftest.o conftest.o.g &&
- ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g; then
+ ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then
:
else
BUILD_CONFIG=
fi
baseargs="$baseargs --disable-option-checking"
+# Record and document user additions to sub configure arguments.
+
+
+
+
# For the build-side libraries, we just need to pretend we're native,
# and not use the same cache file. Multilibs are neither needed nor
# desired.
-build_configargs="--cache-file=../config.cache ${baseargs}"
+build_configargs="$build_configargs --cache-file=../config.cache ${baseargs}"
# For host modules, accept cache file option, or specification as blank.
case "${cache_file}" in
# Host dirs don't like to share a cache file either, horribly enough.
# This seems to be due to autoconf 2.5x stupidity.
-host_configargs="--cache-file=./config.cache ${extra_host_args} ${baseargs}"
+host_configargs="$host_configargs --cache-file=./config.cache ${extra_host_args} ${baseargs}"
-target_configargs=${baseargs}
+target_configargs="$target_configargs ${baseargs}"
# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built