#!/bin/sh
-# Please do not edit this file. It is generated automatically from
-# configure.in and a configure template.
-configdirs=
-
-#!/bin/sh
-
-# Configuration script template
-# Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
-#This file is part of GNU.
+### WARNING: this file contains embedded tabs. Do not run untabify on this file.
-#GNU CC is free software; you can redistribute it and/or modify
-#it under the terms of the GNU General Public License as published by
-#the Free Software Foundation; either version 1, or (at your option)
-#any later version.
+# Configuration script
+# Copyright (C) 1988, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
-#GNU CC is distributed in the hope that it will be useful,
-#but WITHOUT ANY WARRANTY; without even the implied warranty of
-#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#GNU General Public License for more details.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-#You should have received a copy of the GNU General Public License
-#along with GNU CC; see the file COPYING. If not, write to
-#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+# Please email any bugs, comments, and/or additions to this file to:
+# configure@cygnus.com
-# $Id$
+# This file was written by K. Richard Pixley.
#
# Shell script to create proper links to machine-dependent files in
-# preparation for compiling gcc.
-#
-# Usage: configure [+srcdir=DIR] [+host=HOST] [+gas] [+nfp] TARGET
+# preparation for compilation.
#
# If configure succeeds, it leaves its status in config.status.
# If configure fails after disturbing the status quo,
-# config.status is removed.
+# config.status is removed.
#
-progname=$0
+export PATH || (echo "OOPS, this isn't sh. Desperation time. I will feed myself to sh."; sh $0 $argv; kill $$)
remove=rm
hard_link=ln
#symbolic_link="echo ln -s"
# clear some things potentially inherited from environment.
-target=
-template=
+
+Makefile=Makefile
+Makefile_in=Makefile.in
+arguments=$*
+build_alias=
+configdirs=
+exec_prefix=
+exec_prefixoption=
+fatal=
+floating_point=default
+gas=default
+host_alias=NOHOST
+host_makefile_frag=
+moveifchange=
+norecursion=
+package_makefile_frag=
+prefix=/usr/local
+progname=
+program_prefix=
+program_prefixoption=
+program_suffix=
+program_suffixoption=
+program_transform_name=
+program_transform_nameoption=
+redirect=">/dev/null"
removing=
-norecurse=
-ansi=
+site=
+site_makefile_frag=
+site_option=
srcdir=
+srctrigger=
+subdirs=
+target_alias=NOTARGET
+target_makefile_frag=
+undefs=NOUNDEFS
+version="$Revision$"
+x11=default
+
+### we might need to use some other shell than /bin/sh for running subshells
+#
+config_shell=${CONFIG_SHELL-/bin/sh}
+
+NO_EDIT="This file was generated automatically by configure. Do not edit."
+
+## this is a little touchy and won't always work, but...
+##
+## if the argv[0] starts with a slash then it is an absolute name that can (and
+## must) be used as is.
+##
+## otherwise, if argv[0] has no slash in it, we can assume that it is on the
+## path. Since PATH might include "." we also add `pwd` to the end of PATH.
+##
+
+progname=$0
+# if PWD already has a value, it is probably wrong.
+if [ -n "$PWD" ]; then PWD=`pwd`; fi
+
+case "${progname}" in
+/*) ;;
+*/*) ;;
+*)
+ PATH=$PATH:${PWD=`pwd`} ; export PATH
+ ;;
+esac
-for arg in $*;
+# Loop over all args
+
+while :
do
- case $arg in
- -ansi | +ansi)
- ansi=true
- ;;
- -template=* | +template=*)
- template=`echo $arg | sed 's/[+-]template=//'`
+
+# Break out if there are no more args
+ case $# in
+ 0)
+ break 2
;;
- -norecurse | +norecurse)
- norecurse=true
+ esac
+
+# Get the first arg, and shuffle
+ option=$1
+ shift
+
+# Make all options have two hyphens
+ orig_option=$option # Save original for error messages
+ case $option in
+ --*) ;;
+ -*) option=-$option ;;
+ esac
+
+# Split out the argument for options that take them
+ case $option in
+ --*=*)
+ optarg=`echo $option | sed -e 's/^[^=]*=//'`
;;
- -rm | +rm)
- removing=$arg
+# These options have mandatory values. Since we didn't find an = sign,
+# the value must be in the next argument
+ --b* | --e* | --ho* | --pre* | --program-p* | --program-s* | --program-t* | --si* | --sr* | --ta* | --tm*)
+ optarg=$1
+ shift
;;
- -srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*)
- srcdir=`echo $arg | sed 's/[+-]s[a-z]*=//'`
+ esac
+
+# Now, process the options
+ case $option in
+
+ --build* | --b*)
+ case "$build_alias" in
+ "") build_alias=$optarg ;;
+ *) echo '***' Can only configure for one build machine at a time. 1>&2
+ fatal=yes
+ ;;
+ esac
;;
- -host=* | +host=* | +hos=* | +ho=* | +h=*)
- host=`echo $arg | sed 's/[+-]h[a-z]*=//'`
- ;;
- -languages=* | +languages=* | +language=* | +languag=* \
- | +langua=* | +langu=* | +lang=* | +lan=* | +la=* \
- | +l=*)
- languages="$languages `echo $arg | sed 's/[+-]l[a-z]*=//'`"
+ --exec-prefix* | --e*)
+ exec_prefix=$optarg
+ exec_prefixoption="--exec-prefix=$optarg"
;;
- -gas | +gas | +ga | +g)
+ --gas | --g*)
gas=yes
;;
- -nfp | +nfp | +nf | +n)
- nfp=yes
+ --help | --he*)
+ fatal=true
+ ;;
+ --host* | --ho*)
+ case $host_alias in
+ NOHOST) host_alias=$optarg ;;
+ *) echo '***' Can only configure for one host at a time. 1>&2
+ fatal=yes
+ ;;
+ esac
+ ;;
+ --nfp | --nf*)
+ floating_point=no
+ ;;
+ --norecursion | --no*)
+ norecursion=true
+ ;;
+ --prefix* | --pre*)
+ prefix=$optarg
+ prefixoption="--prefix=$optarg"
+ ;;
+ --program-prefix* | --program-p*)
+ program_prefix=$optarg
+ program_prefixoption="--program-prefix=$optarg"
+ ;;
+ --program-suffix* | --program-s*)
+ program_suffix=$optarg
+ program_suffixoption="--program-suffix=$optarg"
+ ;;
+ --program-transform-name* | --program-t*)
+ # Double any backslashes or dollar signs in the argument
+ program_transform_name="${program_transform_name} -e `echo ${optarg} | sed -e 's/\\\\/\\\\\\\\/g' -e 's/\\\$/$$/g'`"
+ program_transform_nameoption="--program-transform-nameoption='$optarg'"
+ ;;
+ --rm)
+ removing=--rm
+ ;;
+ --site* | --si*)
+ site=$optarg
+ site_option="--site=$optarg"
+ ;;
+ --srcdir*/ | --sr*/)
+ # Remove trailing slashes. Otherwise, when the file name gets
+ # bolted into an object file as debug info, it has two slashes in
+ # it. Ordinarily this is ok, but emacs takes double slash to
+ # mean "forget the first part".
+ srcdir=`echo $optarg | sed -e 's:/$::'`
+ ;;
+ --srcdir* | --sr*)
+ srcdir=$optarg
+ ;;
+ --target* | --ta*)
+ case $target_alias in
+ NOTARGET) target_alias=$optarg ;;
+ *) echo '***' Can only configure for one target at a time. 1>&2
+ fatal=yes
+ ;;
+ esac
+ ;;
+ --tmpdir* | --tm*)
+ TMPDIR=$optarg
+ tmpdiroption="--tmpdir=$optarg"
+ ;;
+ --verbose | --v | --verb*)
+ redirect=
+ verbose=--verbose
+ ;;
+ --version | --V | --vers*)
+ echo "This is Cygnus Configure version" `echo ${version} | sed 's/[ $:]//g'`
+ exit 0
+ ;;
+ --with-*)
+ case "$option" in
+ *=*) ;;
+ *) optarg=yes ;;
+ esac
+
+ withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
+ eval $withopt="$optarg"
+ withoptions="$withoptions $option"
+ ;;
+ --without-*)
+ withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'`
+ eval $withopt=no
+ withoutoptions="$withoutoptions $option"
+ ;;
+ --x) ;;
+ --*)
+ exec 1>&2
+ echo
+ echo "Unrecognized option: \"$orig_option\"".
+ echo
+ fatal=true
;;
*)
-# Allow configure HOST TARGET
- if [ x$host = x ] ; then host=$target ; fi
- target=$arg
+ case $undefs in
+ NOUNDEFS) undefs=$option ;;
+ *) echo '***' Can only configure for one host and one target at a time. 1>&2
+ fatal=yes
+ ;;
+ esac
;;
esac
done
-# process host and target only if not rebuilding configure itself.
-if [ -z "$template" -a -z "$removing" ]
-then
- # Complain if an arg is missing
- if [ -z "$target" ]
- then
- echo "Usage: $progname [+srcdir=DIR] [+host=HOST] [+gas] [+nfp] TARGET"
- echo -n "Where HOST and TARGET are something like "
- echo "\`vax', \`sun3', \`encore', etc."
- if [ -r config.status ]
- then
- cat config.status
- fi
- exit 1
- fi
-
- # Default other arg
- if [ -z "$host" ]
- then
- host=$target
- fi
-
-fi
-
-#### configure.in files come in here.
-# This file is a shell script fragment that supplies the information
-# necessary to tailor a template configure script into the configure
-# script appropriate for this directory. For more information, check
-# any existing configure script.
-
-configdirs="bfd binutils gas gcc"
-srctrigger=gcc
-srcname="gnu development package"
-### end of configure.in
-
-# are we rebuilding config itself?
-if [ -n "$template" ]
-then
- if [ ! -r $template ]
- then
- echo "Can't find template ${template}."
- exit 1
- fi
-
- mv configure configure.old
- echo "#!/bin/sh" > configure
- echo "# Please do not edit this file. It is generated automatically from" >> configure
- echo "# configure.in and a configure template." >> configure
- echo "configdirs=" >> configure
- echo >> configure
-
- if [ -r configure.in ]
- then
- sed -e "/^####/ r configure.in" $template >> configure
- else
- cat $template >> configure
- fi
-
- chmod a+x configure
- rm configure.old
- echo Rebuilt configure in `pwd`
-
- if [ x$norecurse = x ]
- then
- while [ -n "$configdirs" ]
- do
- # set configdir to car of configdirs, configdirs to cdr of configdirs
- set $configdirs; configdir=$1; shift; configdirs=$*
+# process host and target
- if [ "`echo ${configdir}.*`" != "${configdir}.*" ]
- then
- targetspecificdirs=${configdir}.*
- else
- targetspecificdirs=
- fi
-
- for i in ${configdir} ${targetspecificdirs}
- do
- if [ -r $i/configure ]
- then
- (cd $i ;
- configure +template=${template})
- else
- echo No configure script in `pwd`/$i
- fi
- done
- done
- fi
-
- exit 0
-fi
-
-# Temporarily, we support only direct subdir builds.
-hostsubdir=Host-$host
-targetsubdir=Target-$target
-
-if [ -n "$removing" ]
-then
-# rm -rf $hostsubdir/$targetsubdir
+# The following section does some error checking, and then does defaulting for
+# the host and target. The inputs are host, which comes from the --host
+# option, target, which comes from the --target options, and undefs, which is
+# an argument that isn't an option (cuz it doesn't start with --). Ie:
+# configure --host HOST --target TARGET --opt1 UNDEFS --opt2 --opt3 ...
#
-# if [ -z "`(ls $hostsubdir) 2>&1 | grep Target-`" ]
-# then
-# rm -rf $hostsubdir
-# fi
-
- rm -f .gdbinit Makefile config.status $links
-
-else
-# if [ ! -d $hostsubdir ] ; then mkdir $hostsubdir ; fi
-# cd $hostsubdir
+# The first rule is that you aren't allowed to specify --host, --target and
+# undefs at the same time. After that, we do defaulting. The host defaults to
+# undefs. Ie:
+# configure --target TARGET --opt1 HOST --opt2
#
-# if [ ! -d $targetsubdir ] ; then mkdir $targetsubdir ; fi
-# cd $targetsubdir
+# If there are no undefs, the host defaults to the current host (as determined
+# by config.guess).
#
-# srcdir=../..
-
- # Find the source files, if location was not specified.
- if [ x$srcdir = x ]
- then
- srcdirdefaulted=1
- srcdir=.
- if [ ! -r ${srctrigger} ]
- then
- srcdir=..
- fi
- fi
-
- if [ ! -r ${srcdir}/${srctrigger} ]
- then
- if [ -z "$srcdirdefaulted" ]
- then
- echo "$progname: Can't find ${srcname} sources in \`${srcdir}'." 1>&2
- else
- echo "$progname: Can't find ${srcname} sources in \`.' or \`..'." 1>&2
- fi
- exit 1
- fi
-
- # Set up the list of links to be made.
- # $links is the list of link names, and $files is the list of names to link to.
-
- # Make the links.
- while [ -n "$files" ]
- do
- # set file to car of files, files to cdr of files
- set $files; file=$1; shift; files=$*
- set $links; link=$1; shift; links=$*
-
- if [ ! -r ${srcdir}/${file} ]
- then
- echo "$progname: cannot create a link \"${link}\"," 1>&2
- echo "since the file \"$file\" does not exist." 1>&2
- exit 1
- fi
-
- $remove -f $link
- rm -f config.status
- # Make a symlink if possible, otherwise try a hard link
- $symbolic_link ${srcdir}/$file $link 2>/dev/null || $hard_link ${srcdir}/$file $link
-
- if [ ! -r $link ]
- then
- echo "$progname: unable to link \"$link\" to \"${srcdir}/$file\"." 1>&2
- exit 1
- fi
- echo "Linked \"$link\" to \"${srcdir}/${file}\"."
- done
-
- # Install a makefile, and make it set VPATH
- # if necessary so that the sources are found.
- # Also change its value of srcdir.
- # Also create a .gdbinit file which runs the one in srcdir
- # and tells GDB to look there for source files.
- case $srcdir in
- .)
+# Target defaults to undefs. If undefs wasn't specified, then it defaults to
+# host.
+
+case "${fatal}" in
+"")
+ # Make sure that host, target & undefs aren't all specified at the
+ # same time.
+ case $host_alias---$target_alias---$undefs in
+ NOHOST---*---* | *---NOTARGET---* | *---*---NOUNDEFS)
;;
- *)
- echo "VPATH = ${srcdir}" > x
- cat x ${srcdir}/Makefile.in | sed "s@^srcdir = \.@srcdir = ${srcdir}@" > Makefile.in
- rm x
- echo "dir ." > .gdbinit
- echo "dir ${srcdir}" >> .gdbinit
- echo "source ${srcdir}/.gdbinit" >> .gdbinit
+ *) echo '***' Can only configure for one host and one target at a time. 1>&2
+ fatal=yes
+ break 2
;;
esac
- host_var_file=hmake-${host}
- target_var_file=tmake-${target}
-
- # Conditionalize the makefile for this machine.
- if [ -f ${srcdir}/config/${host_var_file} ]
- then
- sed -e "/^####/ r ${srcdir}/config/${host_var_file}" Makefile.in > Makefile.tem
- else
- cp Makefile.in Makefile.tem
- fi
-
- if [ -f ${srcdir}/config/${target_var_file} ]
- then
- sed -e "/^####/ r ${srcdir}/config/${target_var_file}" Makefile.tem > Makefile.tem1
- mv Makefile.tem1 Makefile.tem
- fi
-
- # Remove all formfeeds, since some Makes get confused by them.
- sed "s/\f//" Makefile.tem >> Makefile.tem1
- mv Makefile.tem1 Makefile.tem
-
- # reset SUBDIRS
- sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" Makefile.tem > Makefile.tem1
- mv Makefile.tem1 Makefile.tem
-
- # reset NONSUBDIRS
- sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" Makefile.tem > Makefile.tem1
- mv Makefile.tem1 Makefile.tem
-
- # Delete the intermediate files
- if [ x$srcdir != x. ] ; then rm Makefile.in ; fi
-
- rm -f Makefile
+ # Now, do defaulting for host.
+ case $host_alias in
+ NOHOST)
+ case $undefs in
+ NOUNDEFS)
+ # Neither --host option nor undefs were present.
+ # Call config.guess.
+ guesssys=`echo ${progname} | sed 's/configure$/config.guess/'`
+ if host_alias=`${guesssys}`
+ then
+ echo "Configuring for a ${host_alias} host." 1>&2
+ arguments="--host=$host_alias $arguments"
+ else
+ echo 'Config.guess failed to determine the host type. You need to specify one.' 1>&2
+ fatal=yes
+ fi
+ ;;
+ *)
+ host_alias=$undefs
+ ;;
+ esac
+ esac
- # Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
- if [ x$host != x$target ]
- then
- echo "CROSS=-DCROSS_COMPILE" > Makefile
- echo "ALL=start.encap" >> Makefile
- else
- echo "ALL=all.internal" > Makefile
+ # Do defaulting for target. If --target option isn't present, default
+ # to undefs. If undefs isn't present, default to host.
+ case $target_alias in
+ NOTARGET)
+ case $undefs in
+ NOUNDEFS)
+ target_alias=$host_alias
+ ;;
+ *)
+ target_alias=$undefs
+ ;;
+ esac
+ esac
+ ;;
+*) ;;
+esac
+
+if [ -n "${fatal}" -o "${host_alias}" = "help" ] ; then
+ exec 1>&2
+ echo Usage: configure HOST
+ echo
+ echo Options: [defaults in brackets]
+ echo ' --prefix=MYDIR configure for installation of host dependent files into MYDIR. ["/usr/local"]'
+ echo ' --exec-prefix=MYDIR configure for installation of host dependent files into MYDIR. ["/usr/local"]'
+ echo ' --help print this message. [normal config]'
+ echo ' --build=BUILD configure for building on BUILD. [BUILD=HOST]'
+ echo ' --host=HOST configure for HOST. [determined via config.guess]'
+ echo ' --norecursion configure this directory only. [recurse]'
+ echo ' --program-prefix=FOO install programs with FOO prepended to their names. [ "" ]'
+ echo ' --program-suffix=FOO install programs with FOO appended to their names. [ "" ]'
+ echo ' --program-transform-name=FOO install programs with names transformed by sed pattern FOO. [ "" ]'
+ echo ' --site=SITE configure with site specific makefile for SITE'
+ echo ' --srcdir=DIR find the sources in DIR. ["." or ".."]'
+ echo ' --target=TARGET configure for TARGET. [TARGET = HOST]'
+ echo ' --tmpdir=TMPDIR create temporary files in TMPDIR. [ TMPDIR = "/tmp" ]'
+ echo ' --nfp configure the compilers default to soft floating point. [hard float]'
+ echo ' --with-FOO, --with-FOO=BAR specify that FOO is available'
+ echo ' --without-FOO specify that FOO is NOT available'
+ echo
+ echo 'Where HOST and TARGET are something like "vax", "sun3", "encore", etc.'
+ echo
+ if [ -r config.status ] ; then
+ cat config.status
fi
- # set target and host
- echo "host = $host" >> Makefile
- echo "target = $target" >> Makefile
+ exit 1
+fi
- cat Makefile.tem >> Makefile
- rm Makefile.tem
+configsub=`echo ${progname} | sed 's/configure$/config.sub/'`
+moveifchange=`echo ${progname} | sed 's/configure$/move-if-change/'`
- using=
- if [ -f ${srcdir}/config/${host_var_file} ]
- then
- using=" using \"${host_var_file}\""
- fi
+# this is a hack. sun4 must always be a valid host alias or this will fail.
+if ${configsub} sun4 >/dev/null 2>&1 ; then
+ true
+else
+ echo '***' cannot find config.sub. 1>&2
+ exit 1
+fi
- if [ -f ${srcdir}/config/${target_var_file} ]
- then
- if [ -z "${using}" ]
- then
- andusing=" using \"${target_var_file}\""
- else
- andusing="${using} and \"${target_var_file}\""
- fi
- else
- andusing=${using}
- fi
+touch config.junk
+if ${moveifchange} config.junk config.trash ; then
+ true
+else
+ echo '***' cannot find move-if-change. 1>&2
+ exit 1
+fi
+rm -f config.junk config.trash
+
+case "${srcdir}" in
+"")
+ if [ -r configure.in ] ; then
+ srcdir=.
+ else
+ if [ -r ${progname}.in ] ; then
+ srcdir=`echo ${progname} | sed 's:/configure$::'`
+ else
+ echo '***' "Can't find configure.in. Try using --srcdir=some_dir" 1>&2
+ exit 1
+ fi
+ fi
+ ;;
+*) ;;
+esac
+
+### warn about some conflicting configurations.
+
+case "${srcdir}" in
+".") ;;
+*)
+ if [ -f ${srcdir}/config.status ] ; then
+ echo '***' Cannot configure here in \"${PWD=`pwd`}\" when \"${srcdir}\" is currently configured. 1>&2
+ exit 1
+ fi
+esac
+
+# default exec_prefix
+case "${exec_prefix}" in
+"") exec_prefix="\$(prefix)" ;;
+*) ;;
+esac
+
+### break up ${srcdir}/configure.in.
+case "`grep '^# per\-host:' ${srcdir}/configure.in`" in
+"")
+ echo '***' ${srcdir}/configure.in has no \"per-host:\" line. 1>&2
+ exit 1
+ ;;
+*) ;;
+esac
+
+case "`grep '^# per\-target:' ${srcdir}/configure.in`" in
+"")
+ echo '***' ${srcdir}/configure.in has no \"per-target:\" line. 1>&2
+ exit 1
+ ;;
+*) ;;
+esac
+
+case "${TMPDIR}" in
+"") TMPDIR=/tmp ; export TMPDIR ;;
+*) ;;
+esac
+
+# keep this filename short for &%*%$*# 14 char file names
+tmpfile=${TMPDIR}/cONf$$
+trap "rm -f ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos" 0
+
+# split ${srcdir}/configure.in into common, per-host, per-target,
+# and post-target parts. Post-target is optional.
+sed -e '/^# per\-host:/,$d' ${srcdir}/configure.in > ${tmpfile}.com
+sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' ${srcdir}/configure.in > ${tmpfile}.hst
+if grep '^# post-target:' ${srcdir}/configure.in >/dev/null ; then
+ sed -e '1,/^# per\-target:/d' -e '/^# post\-target:/,$d' ${srcdir}/configure.in > ${tmpfile}.tgt
+ sed -e '1,/^# post\-target:/d' ${srcdir}/configure.in > ${tmpfile}.pos
+else
+ sed -e '1,/^# per\-target:/d' ${srcdir}/configure.in > ${tmpfile}.tgt
+ echo >${tmpfile}.pos
+fi
- echo "Created \"Makefile\""${andusing}.
-
- if [ x$host = x$target ]
- then
- echo "Links are now set up for use with a $target." \
- > config.status
-# | tee ${srcdir}/config.status
- else
- echo "Links are now set up for host $host and target $target." \
- > config.status
-# | tee ${srcdir}/config.status
- fi
+### do common part of configure.in
+
+. ${tmpfile}.com
+
+# some sanity checks on configure.in
+case "${srctrigger}" in
+"")
+ echo '***' srctrigger not set in ${PWD=`pwd`}/configure.in. 1>&2
+ exit 1
+ ;;
+*) ;;
+esac
+
+case "${build_alias}" in
+"") ;;
+*)
+ result=`${configsub} ${build_alias}`
+ buildopt="--build=${build_alias}"
+ build_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+ build_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+ build_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+ build=${build_cpu}-${build_vendor}-${build_os}
+ ;;
+esac
+
+result=`${configsub} ${host_alias}`
+host_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+host_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+host_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+host=${host_cpu}-${host_vendor}-${host_os}
+
+. ${tmpfile}.hst
+
+result=`${configsub} ${target_alias}`
+target_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+target_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+target_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+target=${target_cpu}-${target_vendor}-${target_os}
+
+. ${tmpfile}.tgt
+
+# Find the source files, if location was not specified.
+case "${srcdir}" in
+"")
+ srcdirdefaulted=1
+ srcdir=.
+ if [ ! -r ${srctrigger} ] ; then
+ srcdir=..
+ fi
+ ;;
+*) ;;
+esac
+
+if [ ! -r ${srcdir}/${srctrigger} ] ; then
+ case "${srcdirdefaulted}" in
+ "") echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/${srcdir}" 1>&2 ;;
+ *) echo '***' "${progname}: Can't find ${srcname} sources in ${PWD=`pwd`}/. or ${PWD=`pwd`}/.." 1>&2 ;;
+ esac
+
+ echo '***' \(At least ${srctrigger} is missing.\) 1>&2
+ exit 1
+fi
- cd ${srcdir}
+# Some systems (e.g., one of the i386-aix systems the gas testers are
+# using) don't handle "\$" correctly, so don't use it here.
+tooldir='$(exec_prefix)'/${target_alias}
+
+if [ "${host_alias}" != "${target_alias}" ] ; then
+ if [ "${program_prefixoption}" = "" ] ; then
+ if [ "${program_suffixoption}" = "" ] ; then
+ if [ "${program_transform_nameoption}" = "" ] ; then
+ program_prefix=${target_alias}- ;
+ fi
+ fi
+ fi
fi
-# If there are subdirectories, then recurse.
+# Merge program_prefix and program_suffix onto program_transform_name
+# Use a double $ so that make ignores it
+if [ "${program_suffix}" != "" ] ; then
+ program_transform_name="-e s,\$\$,${program_suffix}, ${program_transform_name}"
+fi
-if [ -n "$norecurse" ] ; then exit 0 ; fi
+if [ "${program_prefix}" != "" ] ; then
+ program_transform_name="-e s,^,${program_prefix}, ${program_transform_name}"
+fi
-while [ -n "$configdirs" ]
-do
- # set configdir to car of configdirs, configdirs to cdr of configdirs
- set $configdirs; configdir=$1; shift; configdirs=$*
-
- # check for target override
- targetspecificdir=${configdir}.${target}
- if [ -d ${targetspecificdir} ]
- then
- configdir=${targetspecificdir}
- fi
+for subdir in . ${subdirs} ; do
+
+ # ${subdir} is relative path from . to the directory we're currently
+ # configuring.
+ # ${invsubdir} is inverse of ${subdir), *with* trailing /, if needed.
+ invsubdir=`echo ${subdir}/ | sed -e 's|\./||g' -e 's|[^/]*/|../|g'`
+
+ ### figure out what to do with srcdir
+ case "${srcdir}" in
+ ".") # no -srcdir option. We're building in place.
+ makesrcdir=. ;;
+ /*) # absolute path
+ makesrcdir=`echo ${srcdir}/${subdir} | sed -e 's|/\.$||'`
+ ;;
+ *) # otherwise relative
+ case "${subdir}" in
+ .) makesrcdir=${srcdir} ;;
+ *) makesrcdir=${invsubdir}${srcdir}/${subdir} ;;
+ esac
+ ;;
+ esac
+
+ if [ "${subdir}/" != "./" ] ; then
+ Makefile=${subdir}/Makefile
+ fi
+
+ if [ ! -d ${subdir} ] ; then
+ if mkdir ${subdir} ; then
+ true
+ else
+ echo '***' "${progname}: could not make ${PWD=`pwd`}/${subdir}" 1>&2
+ exit 1
+ fi
+ fi
+
+ case "${removing}" in
+ "")
+ case "${subdir}" in
+ .) ;;
+ *) eval echo Building in ${subdir} ${redirect} ;;
+ esac
+
+ # FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
+ # Set up the list of links to be made.
+ # ${links} is the list of link names, and ${files} is the list of names to link to.
+
+ # Make the links.
+ configlinks="${links}"
+ if [ -r ${subdir}/config.status ] ; then
+ mv -f ${subdir}/config.status ${subdir}/config.back
+ fi
+ while [ -n "${files}" ] ; do
+ # set file to car of files, files to cdr of files
+ set ${files}; file=$1; shift; files=$*
+ set ${links}; link=$1; shift; links=$*
+
+ if [ ! -r ${srcdir}/${file} ] ; then
+ echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
+ echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
+ exit 1
+ fi
+
+ ${remove} -f ${link}
+ # Make a symlink if possible, otherwise try a hard link
+ ${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link}
+
+ if [ ! -r ${link} ] ; then
+ echo '***' "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2
+ exit 1
+ fi
+
+ echo "Linked \"${link}\" to \"${srcdir}/${file}\"."
+ done
+
+ # Create a .gdbinit file which runs the one in srcdir
+ # and tells GDB to look there for source files.
+
+ if [ -r ${srcdir}/${subdir}/.gdbinit ] ; then
+ case ${srcdir} in
+ .) ;;
+ *) cat > ${subdir}/.gdbinit <<EOF
+# ${NO_EDIT}
+dir .
+dir ${makesrcdir}
+source ${makesrcdir}/.gdbinit
+EOF
+ ;;
+ esac
+ fi
+
+ # Install a makefile, and make it set VPATH
+ # if necessary so that the sources are found.
+ # Also change its value of srcdir.
+ # NOTE: Makefile generation constitutes the majority of the time in configure. Hence, this section has
+ # been somewhat optimized and is perhaps a bit twisty.
+
+ # code is order so as to try to sed the smallest input files we know.
+
+ # the four makefile fragments MUST end up in the resulting Makefile in this order:
+ # package, target, host, and site. so do these separately because I don't trust the
+ # order of sed -e expressions.
+
+ if [ -f ${srcdir}/${subdir}/${Makefile_in} ] ; then
+
+ # Conditionalize for this site from "Makefile.in" (or whatever it's called) into Makefile.tem
+ rm -f ${subdir}/Makefile.tem
+ case "${site}" in
+ "") cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem ;;
+ *)
+ site_makefile_frag=${srcdir}/config/ms-${site}
+
+ if [ -f ${site_makefile_frag} ] ; then
+ sed -e "/^####/ r ${site_makefile_frag}" ${srcdir}/${subdir}/${Makefile_in} \
+ > ${subdir}/Makefile.tem
+ else
+ cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem
+ site_makefile_frag=
+ fi
+ ;;
+ esac
+ # working copy now in ${subdir}/Makefile.tem
+
+ # Conditionalize the makefile for this host.
+ rm -f ${Makefile}
+ case "${host_makefile_frag}" in
+ "") mv ${subdir}/Makefile.tem ${Makefile} ;;
+ *)
+ if [ ! -f ${host_makefile_frag} ] ; then
+ host_makefile_frag=${srcdir}/${host_makefile_frag}
+ fi
+ if [ -f ${host_makefile_frag} ] ; then
+ sed -e "/^####/ r ${host_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile}
+ else
+ echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2
+ echo '***' is missing in ${PWD=`pwd`}. 1>&2
+ mv ${subdir}/Makefile.tem ${Makefile}
+ fi
+ esac
+ # working copy now in ${Makefile}
+
+ # Conditionalize the makefile for this target.
+ rm -f ${subdir}/Makefile.tem
+ case "${target_makefile_frag}" in
+ "") mv ${Makefile} ${subdir}/Makefile.tem ;;
+ *)
+ if [ ! -f ${target_makefile_frag} ] ; then
+ target_makefile_frag=${srcdir}/${target_makefile_frag}
+ fi
+ if [ -f ${target_makefile_frag} ] ; then
+ sed -e "/^####/ r ${target_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
+ else
+ mv ${Makefile} ${subdir}/Makefile.tem
+ target_makefile_frag=
+ fi
+ ;;
+ esac
+ # real copy now in ${subdir}/Makefile.tem
+
+ # Conditionalize the makefile for this package.
+ rm -f ${Makefile}
+ case "${package_makefile_frag}" in
+ "") mv ${subdir}/Makefile.tem ${Makefile} ;;
+ *)
+ if [ ! -f ${package_makefile_frag} ] ; then
+ package_makefile_frag=${srcdir}/${package_makefile_frag}
+ fi
+ if [ -f ${package_makefile_frag} ] ; then
+ sed -e "/^####/ r ${package_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile}
+ else
+ echo '***' Expected package makefile fragment \"${package_makefile_frag}\" 1>&2
+ echo '***' is missing in ${PWD=`pwd`}. 1>&2
+ mv ${subdir}/Makefile.tem ${Makefile}
+ fi
+ esac
+ # working copy now in ${Makefile}
+
+ mv ${Makefile} ${subdir}/Makefile.tem
+
+ # real copy now in ${subdir}/Makefile.tem
+
+ # prepend warning about editting, and a bunch of variables.
+ rm -f ${Makefile}
+ cat > ${Makefile} <<EOF
+# ${NO_EDIT}
+VPATH = ${makesrcdir}
+links = ${configlinks}
+host_alias = ${host_alias}
+host_cpu = ${host_cpu}
+host_vendor = ${host_vendor}
+host_os = ${host_os}
+host_canonical = ${host_cpu}-${host_vendor}-${host_os}
+target_alias = ${target_alias}
+target_cpu = ${target_cpu}
+target_vendor = ${target_vendor}
+target_os = ${target_os}
+target_canonical = ${target_cpu}-${target_vendor}-${target_os}
+EOF
+ case "${build}" in
+ "") ;;
+ *) cat >> ${Makefile} << EOF
+build_alias = ${build_alias}
+build_cpu = ${build_cpu}
+build_vendor = ${build_vendor}
+build_os = ${build_os}
+build_canonical = ${build_cpu}-${build_vendor}-${build_os}
+EOF
+ esac
+
+ case "${package_makefile_frag}" in
+ "") ;;
+ /*) echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;;
+ *) echo package_makefile_frag = ${invsubdir}${package_makefile_frag} >>${Makefile} ;;
+ esac
+
+ case "${target_makefile_frag}" in
+ "") ;;
+ /*) echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;;
+ *) echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile} ;;
+ esac
+
+ case "${host_makefile_frag}" in
+ "") ;;
+ /*) echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;;
+ *) echo host_makefile_frag = ${invsubdir}${host_makefile_frag} >>${Makefile} ;;
+ esac
+
+ if [ "${site_makefile_frag}" != "" ] ; then
+ echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile}
+ fi
+
+ # make sure that some sort of reasonable default exists for these
+ # two variables
+ CXX=${CXX-"g++ -O"}
+ CC=${CC-cc}
+
+ # reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS,
+ # remove any form feeds.
+ if [ -z "${subdirs}" ]; then
+ rm -f ${subdir}/Makefile.tem2
+ sed -e "s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:" \
+ -e "s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:" \
+ ${subdir}/Makefile.tem > ${subdir}/Makefile.tem2
+ rm -f ${subdir}/Makefile.tem
+ mv ${subdir}/Makefile.tem2 ${subdir}/Makefile.tem
+ fi
+ sed -e "s:^prefix[ ]*=.*$:prefix = ${prefix}:" \
+ -e "s:^exec_prefix[ ]*=.*$:exec_prefix = ${exec_prefix}:" \
+ -e "s:^SHELL[ ]*=.*$:SHELL = ${config_shell}:" \
+ -e "s:^srcdir[ ]*=.*$:srcdir = ${makesrcdir}:" \
+ -e "s/\f//" \
+ -e "s:^program_prefix[ ]*=.*$:program_prefix = ${program_prefix}:" \
+ -e "s:^program_suffix[ ]*=.*$:program_suffix = ${program_suffix}:" \
+ -e "s:^program_transform_name[ ]*=.*$:program_transform_name = ${program_transform_name}:" \
+ -e "s:^tooldir[ ]*=.*$:tooldir = ${tooldir}:" \
+ ${subdir}/Makefile.tem >> ${Makefile}
+ # final copy now in ${Makefile}
+
+ else
+ echo "No Makefile.in found in ${srcdir}/${subdir}, unable to configure" 1>&2
+ fi
+
+ rm -f ${subdir}/Makefile.tem
+
+ case "${host_makefile_frag}" in
+ "") using= ;;
+ *) using="and \"${host_makefile_frag}\"" ;;
+ esac
+
+ case "${target_makefile_frag}" in
+ "") ;;
+ *) using="${using} and \"${target_makefile_frag}\"" ;;
+ esac
+
+ case "${site_makefile_frag}" in
+ "") ;;
+ *) using="${using} and \"${site_makefile_frag}\"" ;;
+ esac
+
+ newusing=`echo "${using}" | sed 's/and/using/'`
+ using=${newusing}
+ echo "Created \"${Makefile}\" in" ${PWD=`pwd`} ${using}
+
+ . ${tmpfile}.pos
+
+ # describe the chosen configuration in config.status.
+ # Make that file a shellscript which will reestablish
+ # the same configuration. Used in Makefiles to rebuild
+ # Makefiles.
+
+ case "${norecursion}" in
+ "") arguments="${arguments} --norecursion" ;;
+ *) ;;
+ esac
+
+ if [ ${subdir} = . ] ; then
+ echo "#!/bin/sh
+# ${NO_EDIT}
+# This directory was configured as follows:
+${progname}" ${arguments} "
+# ${using}" > ${subdir}/config.new
+ else
+ echo "#!/bin/sh
+# ${NO_EDIT}
+# This directory was configured as follows:
+cd ${invsubdir}
+${progname}" ${arguments} "
+# ${using}" > ${subdir}/config.new
+ fi
+ chmod a+x ${subdir}/config.new
+ if [ -r ${subdir}/config.back ] ; then
+ mv -f ${subdir}/config.back ${subdir}/config.status
+ fi
+ ${moveifchange} ${subdir}/config.new ${subdir}/config.status
+ ;;
+
+ *) rm -f ${Makefile} ${subdir}/config.status ${links} ;;
+ esac
+done
- echo Configuring ${configdir}...
-# (cd ${configdir} ;
-# configure +host=${host} ${target} ${removing}) \
-# | sed 's/^/ /'
+# If there are subdirectories, then recur.
+if [ -z "${norecursion}" -a -n "${configdirs}" ] ; then
+ for configdir in ${configdirs} ; do
+
+ if [ -d ${srcdir}/${configdir} ] ; then
+ eval echo Configuring ${configdir}... ${redirect}
+ case "${srcdir}" in
+ ".") ;;
+ *)
+ if [ ! -d ./${configdir} ] ; then
+ if mkdir ./${configdir} ; then
+ true
+ else
+ echo '***' "${progname}: could not make ${PWD=`pwd`}/${configdir}" 1>&2
+ exit 1
+ fi
+ fi
+ ;;
+ esac
+
+ POPDIR=${PWD=`pwd`}
+ cd ${configdir}
+
+### figure out what to do with srcdir
+ case "${srcdir}" in
+ ".") newsrcdir=${srcdir} ;; # no -srcdir option. We're building in place.
+ /*) # absolute path
+ newsrcdir=${srcdir}/${configdir}
+ srcdiroption="--srcdir=${newsrcdir}"
+ ;;
+ *) # otherwise relative
+ newsrcdir=../${srcdir}/${configdir}
+ srcdiroption="--srcdir=${newsrcdir}"
+ ;;
+ esac
+
+### check for guested configure, otherwise fix possibly relative progname
+ if [ -f ${newsrcdir}/configure ] ; then
+ recprog=${newsrcdir}/configure
+ elif [ -f ${newsrcdir}/configure.in ] ; then
+ case "${progname}" in
+ /*) recprog=${progname} ;;
+ *) recprog=../${progname} ;;
+ esac
+ else
+ eval echo No configuration information in ${configdir} ${redirect}
+ recprog=
+ fi
+
+### The recursion line is here.
+ if [ ! -z "${recprog}" ] ; then
+ if eval ${config_shell} ${recprog} ${verbose} ${buildopt} --host=${host_alias} --target=${target_alias} \
+ ${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
+ ${srcdiroption} ${program_prefixoption} ${program_suffixoption} ${program_transform_nameoption} ${site_option} ${withoptions} ${withoutoptions} ${removing} ${redirect} ; then
+ true
+ else
+ exit 1
+ fi
+ fi
- (cd ${configdir} ;
- ./configure +host=${host} ${target} ${removing}) \
- | sed 's/^/ /'
-done
+ cd ${POPDIR}
+ fi
+ done
+fi
exit 0
#
-# $Log$
-# Revision 1.2 1991/04/09 23:52:41 rich
-# First cut config. builds in place.
+# Local Variables:
+# fill-column: 131
+# End:
#
-#
-#
-
-# end of configure.template
+# end of configure