# Skip some stuff that's unsupported on some NetBSD configurations.
case "${target}" in
i*86-*-netbsdelf*) ;;
+ arm*-*-netbsdelf*) ;;
*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
powerpc-*-eabi)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- powerpc64*-*-linux*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- # not yet ported.
- noconfigdirs="$noconfigdirs target-libffi"
- ;;
rs6000-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
esac
fi
-# record if we want runtime library stuff installed in libsubdir.
-# Blank means no.
-if test -z "${enable_version_specific_runtime_libs}"; then
- enable_version_specific_runtime_libs=no
-fi
-
# Make sure that the compiler is able to generate an executable. If it
# can't, we are probably in trouble. We don't care whether we can run the
# executable--we might be using a cross compiler--we only care whether it
# Note, if you change the default, make sure to fix both here and in
# the gcc and libstdc++-v3 subdirectories.
# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
-gxx_include_dir=
-if test -n "${with_gxx_include_dir}"; then
- case "${with_gxx_include_dir}" in
- yes )
- echo "configure.in: error: bad value ${withval} given for g++ include directory" 1>&2
- exit 1
- ;;
- no )
- ;;
- * )
- gxx_include_dir=${with_gxx_include_dir}
- ;;
- esac
-fi
-if test x${gxx_include_dir} = x; then
- if test x${enable_version_specific_runtime_libs} = xyes; then
- gxx_include_dir='${libsubdir}/include/c++'
- else
- . ${srcdir}/config.if
- gxx_include_dir='${prefix}/include/'${libstdcxx_incdir}
- fi
-else
- gxx_include_dir=${gxx_include_dir}
-fi
+case "${with_gxx_include_dir}" in
+ yes)
+ { echo "configure: error: --with-gxx-include-dir=[dir] requires a directory" 1>&2; exit 1; }
+ ;;
+ no | "")
+ case "${enable_version_specific_runtime_libs}" in
+ yes) gxx_include_dir='${libsubdir}/include/c++' ;;
+ *)
+ . ${srcdir}/config.if
+ gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
+ esac ;;
+ *) gxx_include_dir=${with_gxx_include_dir} ;;
+esac
FLAGS_FOR_TARGET=
case " $target_configdirs " in
*" --with-newlib "*)
case "$target" in
*-cygwin*)
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include -isystem $$s/newlib/libc/sys/cygwin -isystem $$s/newlib/libc/sys/cygwin32' ;;
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;;
esac
# If we're not building GCC, don't discard standard headers.
-
# Build module lists & subconfigure args.
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2705: checking for $ac_word" >&5
+echo "configure:2687: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2738: checking for $ac_word" >&5
+echo "configure:2720: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2777: checking for $ac_word" >&5
+echo "configure:2759: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2810: checking for $ac_word" >&5
+echo "configure:2792: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2849: checking for $ac_word" >&5
+echo "configure:2831: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2882: checking for $ac_word" >&5
+echo "configure:2864: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2921: checking for $ac_word" >&5
+echo "configure:2903: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2954: checking for $ac_word" >&5
+echo "configure:2936: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2993: checking for $ac_word" >&5
+echo "configure:2975: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3026: checking for $ac_word" >&5
+echo "configure:3008: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3065: checking for $ac_word" >&5
+echo "configure:3047: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3098: checking for $ac_word" >&5
+echo "configure:3080: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3137: checking for $ac_word" >&5
+echo "configure:3119: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3170: checking for $ac_word" >&5
+echo "configure:3152: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3209: checking for $ac_word" >&5
+echo "configure:3191: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3242: checking for $ac_word" >&5
+echo "configure:3224: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3281: checking for $ac_word" >&5
+echo "configure:3263: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3314: checking for $ac_word" >&5
+echo "configure:3296: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3362: checking for $ac_word" >&5
+echo "configure:3344: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3395: checking for $ac_word" >&5
+echo "configure:3377: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3434: checking for $ac_word" >&5
+echo "configure:3416: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3467: checking for $ac_word" >&5
+echo "configure:3449: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3506: checking for $ac_word" >&5
+echo "configure:3488: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3539: checking for $ac_word" >&5
+echo "configure:3521: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3578: checking for $ac_word" >&5
+echo "configure:3560: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3611: checking for $ac_word" >&5
+echo "configure:3593: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3650: checking for $ac_word" >&5
+echo "configure:3632: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3683: checking for $ac_word" >&5
+echo "configure:3665: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3722: checking for $ac_word" >&5
+echo "configure:3704: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3755: checking for $ac_word" >&5
+echo "configure:3737: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3794: checking for $ac_word" >&5
+echo "configure:3776: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3827: checking for $ac_word" >&5
+echo "configure:3809: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:3894: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:3876: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section. Otherwise,
-# look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
-t clear
-: clear
-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
-t quote
-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
-t quote
-d
-: quote
-s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output. A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
# Without the "./", some shells look in PATH for config.status.
s%@BUILD_PREFIX@%$BUILD_PREFIX%g
s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g
s%@configlinks@%$configlinks%g
-s%@enable_version_specific_runtime_libs@%$enable_version_specific_runtime_libs%g
s%@gcc_version_trigger@%$gcc_version_trigger%g
s%@gcc_version@%$gcc_version%g
s%@tooldir@%$tooldir%g