# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-# Please email any bugs, comments, and/or additions to this file to:
+# Please report any problems running this configure script to
# configure@cygnus.com
+# Please do not send reports about other problems to this address. See
+# gdb/README, gas/README, etc., for info on where and how to report
+# problems about particular tools.
# This file was written by K. Richard Pixley.
;;
# These options have mandatory values. Since we didn't find an = sign,
# the value must be in the next argument
- --b* | --ex* | --ho* | --pre* | --program-p* | --program-s* | --program-t* | --si* | --sr* | --ta* | --tm* | --x-*)
+ --b* | --cache* | --ex* | --ho* | --pre* | --program-p* | --program-s* | --program-t* | --si* | --sr* | --ta* | --tm* | --x-*)
optarg=$1
shift
;;
;;
esac
;;
+ --cache*)
+ case "$option" in
+ *=*) other_options="${other_options} ${option}" ;;
+ *) other_options="${other_options} ${option}=${optarg}" ;;
+ esac
+ ;;
--disable-*)
enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'`
eval $enableopt=no
# assume we are running native, and force
# the same string for both target and host.
case $target_alias in
- NOTARGET)
- case $undefs in
- NOUNDEFS) ;;
- *)
- if expr $host_alias : $undefs >/dev/null
- then
- host_alias=$undefs
- fi
- ;;
- esac
- ;;
+ NOTARGET) ;;
*)
if expr $host_alias : $target_alias >/dev/null
then
if [ -n "${fatal}" -o "${host_alias}" = "help" ] ; then
exec 1>&2
- echo Usage: configure [OPTIONS] HOST
+ echo Usage: configure [OPTIONS] [HOST]
echo
echo Options: [defaults in brackets]
- echo ' --prefix=MYDIR configure for installation of host independent files into MYDIR. ["/usr/local"]'
- echo ' --exec-prefix=MYDIR configure for installation of host dependent files into MYDIR. ["/usr/local"]'
- echo ' --help print this message. [normal config]'
- echo ' --build=BUILD configure for building on BUILD. [BUILD=HOST]'
- echo ' --host=HOST configure for HOST. [determined via config.guess]'
- echo ' --norecursion configure this directory only. [recurse]'
- echo ' --program-prefix=FOO install programs with FOO prepended to their names. [ "" ]'
- echo ' --program-suffix=FOO install programs with FOO appended to their names. [ "" ]'
- echo ' --program-transform-name=FOO install programs with names transformed by sed pattern FOO. [ "" ]'
- echo ' --site=SITE configure with site specific makefile for SITE'
- echo ' --srcdir=DIR find the sources in DIR. ["." or ".."]'
- echo ' --target=TARGET configure for TARGET. [TARGET = HOST]'
- echo ' --tmpdir=TMPDIR create temporary files in TMPDIR. [ TMPDIR = "/tmp" ]'
- echo ' --nfp configure the compilers default to soft floating point. [hard float]'
+ echo ' --prefix=MYDIR install into MYDIR [/usr/local]'
+ echo ' --exec-prefix=MYDIR install host-dependent files into MYDIR [/usr/local]'
+ echo ' --help print this message [normal config]'
+ echo ' --build=BUILD configure for building on BUILD [BUILD=HOST]'
+ echo ' --host=HOST configure for HOST [determined via config.guess]'
+ echo ' --norecursion configure this directory only [recurse]'
+ echo ' --program-prefix=FOO prepend FOO to installed program names [""]'
+ echo ' --program-suffix=FOO append FOO to installed program names [""]'
+ echo ' --program-transform-name=P transform installed names by sed pattern P [""]'
+ echo ' --site=SITE configure with site-specific makefile for SITE'
+ echo ' --srcdir=DIR find the sources in DIR [. or ..]'
+ echo ' --target=TARGET configure for TARGET [TARGET=HOST]'
+ echo ' --tmpdir=TMPDIR create temporary files in TMPDIR [/tmp]'
+ echo ' --nfp configure for software floating point [hard float]'
echo ' --with-FOO, --with-FOO=BAR package FOO is available (parameter BAR)'
echo ' --without-FOO package FOO is NOT available'
echo ' --enable-FOO, --enable-FOO=BAR include feature FOO (parameter BAR)'
echo ' --disable-FOO do not include feature FOO'
echo
- echo 'Where HOST and TARGET are something like "sun4", "decstation", "encore", etc.'
+ echo 'Where HOST and TARGET are something like "sparc-sunos", "mips-sgi-irix5", etc.'
echo
if [ -r config.status ] ; then
cat config.status
esac
# default exec_prefix
-case "${exec_prefix}" in
+case "${exec_prefixoption}" in
"") exec_prefix="\$(prefix)" ;;
*) ;;
esac
# keep this filename short for &%*%$*# 14 char file names
tmpfile=${TMPDIR}/cONf$$
-trap "rm -f ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos" 0
+# Note that under many versions of sh a trap handler for 0 will *override* any
+# exit status you explicitly specify! At this point, the only non-error exit
+# is at the end of the script; these actions are duplicated there, minus
+# the "exit 1". Don't use "exit 0" anywhere after this without resetting the
+# trap handler, or you'll lose.
+trap "rm -f ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos; exit 1" 0 1 2 15
# split ${srcdir}/configure.in into common, per-host, per-target,
# and post-target parts. Post-target is optional.
case "${build_alias}" in
"") ;;
*)
- result=`${configsub} ${build_alias}`
- buildopt="--build=${build_alias}"
- build_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
- build_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
- build_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
- build=${build_cpu}-${build_vendor}-${build_os}
+ if result=`${config_shell} ${configsub} ${build_alias}` ; then
+ buildopt="--build=${build_alias}"
+ build_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+ build_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+ build_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+ build=${build_cpu}-${build_vendor}-${build_os}
+ else
+ echo "Unrecognized build system name ${build_alias}." 1>&2
+ exit 1
+ fi
;;
esac
-result=`${configsub} ${host_alias}`
+if result=`${config_shell} ${configsub} ${host_alias}` ; then
+ true
+else
+ echo "Unrecognized host system name ${host_alias}." 1>&2
+ exit 1
+fi
host_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
host_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
host_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
. ${tmpfile}.hst
-result=`${configsub} ${target_alias}`
+if result=`${config_shell} ${configsub} ${target_alias}` ; then
+ true
+else
+ echo "Unrecognized target system name ${target_alias}." 1>&2
+ exit 1
+fi
target_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
target_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
target_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
fi
fi
-# Merge program_prefix and program_suffix onto program_transform_name
-# Use a double $ so that make ignores it
+# Merge program_prefix and program_suffix onto program_transform_name.
+# (program_suffix used to use $, but it's hard to preserve $ through both
+# make and sh.)
if [ "${program_suffix}" != "" ] ; then
- program_transform_name="-e s,\$\$,${program_suffix}, ${program_transform_name}"
+ program_transform_name="-e s,\\\\(.*\\\\),\\\\1${program_suffix}, ${program_transform_name}"
fi
if [ "${program_prefix}" != "" ] ; then
.) ;;
*) cat > ${subdir}/.gdbinit <<EOF
# ${NO_EDIT}
-dir .
dir ${makesrcdir}
+dir .
source ${makesrcdir}/.gdbinit
EOF
;;
fi
if [ -f ${package_makefile_frag} ] ; then
sed -e "/^####/ r ${package_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile}
+ rm -f ${subdir}/Makefile.tem
else
echo '***' Expected package makefile fragment \"${package_makefile_frag}\" 1>&2
echo '***' is missing in ${PWD=`pwd`}. 1>&2
done
fi
+# Perform the same cleanup as the trap handler, minus the "exit 1" of course,
+# and reset the trap handler.
+rm -f ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos
+trap 0
+
exit 0
#
projects / deliverable / binutils-gdb.git / blobdiff