ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
+ac_help="$ac_help
+ --enable-werror enable -Werror in bootstrap stage2 and later"
# Initialize some variables set by options.
# The variables have the same names as the options, with
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:583: checking host system type" >&5
+echo "configure:585: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:604: checking target system type" >&5
+echo "configure:606: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:622: checking build system type" >&5
+echo "configure:624: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:677: checking for a BSD compatible install" >&5
+echo "configure:679: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
rs6000-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1856: checking for $ac_word" >&5
+echo "configure:1858: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1886: checking for $ac_word" >&5
+echo "configure:1888: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1937: checking for $ac_word" >&5
+echo "configure:1939: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1969: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1971: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1980 "configure"
+#line 1982 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1985: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1987: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2011: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2013: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2016: checking whether we are using GNU C" >&5
+echo "configure:2018: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2025: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2027: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2044: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2046: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2080: checking for $ac_word" >&5
+echo "configure:2082: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2112: checking for $ac_word" >&5
+echo "configure:2114: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2145: checking whether compiler driver understands Ada" >&5
+echo "configure:2147: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+# By default, C is the only stage 1 language.
+stage1_languages=c
+
+
# Figure out what language subdirectories are present.
# Look if the user specified --enable-languages="..."; if not, use
# the environment variable $LANGUAGES if defined. $LANGUAGES might
${srcdir}/gcc/[*]/config-lang.in) ;;
*)
# From the config-lang.in, get $language, $target_libs,
- # $lang_dirs, and $build_by_default
+ # $lang_dirs, $boot_language, and $build_by_default
language=
target_libs=
lang_dirs=
+ boot_language=
build_by_default=
. ${lang_frag}
# This is quite sensitive to the ordering of the case statement arms.
case $add_this_lang in
no)
# Remove language-dependent dirs.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\" ;;
+ eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ ;;
*)
new_enable_languages="$new_enable_languages,$language"
- missing_languages="`echo "$missing_languages" | sed "s/,$language,/,/"`" ;;
+ missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
+ case ${boot_language} in
+ yes)
+ # Add to (comma-separated) list of stage 1 languages.
+ stage1_languages="${stage1_languages},${language}"
+ ;;
+ esac
+ ;;
esac
;;
esac
done
- missing_languages="`echo "$missing_languages" | sed -e s/^,// -e s/,$//`"
+ missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
if test "x$missing_languages" != x; then
{ echo "configure: error:
The following requested languages were not found: ${missing_languages}" 1>&2; exit 1; }
echo The following languages will be built: ${new_enable_languages}
fi
enable_languages="$new_enable_languages"
- ac_configure_args="`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[^ ]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `"
+ ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[^ ]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
fi
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
tooldir='${exec_prefix}'/${target_alias}
build_tooldir=${tooldir}
-# Generate a default definition for YACC. This is used if the makefile can't
-# locate bison or byacc in objdir.
-
-for prog in 'bison -y' byacc yacc
+# Generate default definitions for YACC, M4, LEX. These are used if the
+# Makefile can't locate these programs in objdir.
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
+for ac_prog in 'bison -y' byacc yacc
do
- set dummy $prog; tmp=$2
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$tmp; then
- DEFAULT_YACC="$prog"
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2612: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_YACC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$DEFAULT_YACC"; then
+ ac_cv_prog_DEFAULT_YACC="$DEFAULT_YACC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_DEFAULT_YACC="$ac_prog"
break
fi
done
- IFS="$save_ifs"
+ IFS="$ac_save_ifs"
+fi
+fi
+DEFAULT_YACC="$ac_cv_prog_DEFAULT_YACC"
+if test -n "$DEFAULT_YACC"; then
+ echo "$ac_t""$DEFAULT_YACC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
- test -n "$DEFAULT_YACC" && break
+test -n "$DEFAULT_YACC" && break
done
+test -n "$DEFAULT_YACC" || DEFAULT_YACC="$MISSING bison"
-# Generate a default definition for M4. This is used if the makefile can't
-# locate m4 in objdir.
-
-for prog in gm4 gnum4 m4
+for ac_prog in gm4 gnum4 m4
do
- set dummy $prog; tmp=$2
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$tmp; then
- DEFAULT_M4="$prog"
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2647: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_M4'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$DEFAULT_M4"; then
+ ac_cv_prog_DEFAULT_M4="$DEFAULT_M4" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_DEFAULT_M4="$ac_prog"
break
fi
done
- IFS="$save_ifs"
+ IFS="$ac_save_ifs"
+fi
+fi
+DEFAULT_M4="$ac_cv_prog_DEFAULT_M4"
+if test -n "$DEFAULT_M4"; then
+ echo "$ac_t""$DEFAULT_M4" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
- test -n "$DEFAULT_M4" && break
+test -n "$DEFAULT_M4" && break
done
+test -n "$DEFAULT_M4" || DEFAULT_M4="$MISSING m4"
-# Generate a default definition for LEX. This is used if the makefile can't
-# locate flex in objdir.
-
-for prog in flex lex
+for ac_prog in flex lex
do
- set dummy $prog; tmp=$2
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$tmp; then
- DEFAULT_LEX="$prog"
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2682: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_LEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$DEFAULT_LEX"; then
+ ac_cv_prog_DEFAULT_LEX="$DEFAULT_LEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_DEFAULT_LEX="$ac_prog"
break
fi
done
- IFS="$save_ifs"
-
- test -n "$DEFAULT_LEX" && break
-done
-
-# FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
-# Set up the list of links to be made.
-# ${links} is the list of link names, and ${files} is the list of names to link to.
-
-# Make the links.
-configlinks="${links}"
-if test -r ./config.status ; then
- mv -f ./config.status ./config.back
+ IFS="$ac_save_ifs"
+fi
+fi
+DEFAULT_LEX="$ac_cv_prog_DEFAULT_LEX"
+if test -n "$DEFAULT_LEX"; then
+ echo "$ac_t""$DEFAULT_LEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
fi
-while test -n "${files}" ; do
- # set file to car of files, files to cdr of files
- set ${files}; file=$1; shift; files=$*
- set ${links}; link=$1; shift; links=$*
-
- if test ! -r ${srcdir}/${file} ; then
- if test ! -r ${file} ; then
- echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
- echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
- exit 1
- else
- srcfile=${file}
- fi
- else
- srcfile=${srcdir}/${file}
- fi
-
- ${remove} -f ${link}
- # Make a symlink if possible, otherwise try a hard link
- if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
- true
- else
- # We need to re-remove the file because Lynx leaves a
- # very strange directory there when it fails an NFS symlink.
- ${remove} -r -f ${link}
- ${hard_link} ${srcfile} ${link}
- fi
- if test ! -r ${link} ; then
- echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
- exit 1
- fi
- echo "Linked \"${link}\" to \"${srcfile}\"."
+test -n "$DEFAULT_LEX" && break
done
+test -n "$DEFAULT_LEX" || DEFAULT_LEX="$MISSING flex"
+
# Create a .gdbinit file which runs the one in srcdir
# and tells GDB to look there for source files.
# at the end of the argument list.
# These will be expanded by make, so quote '$'.
cat <<\EOF_SED > conftestsed
-s/ --no[^ ]* / /
-s/ --c[a-z-]*[= ][^ ]* / /
-s/ --sr[a-z-]*[= ][^ ]* / /
-s/ --ho[a-z-]*[= ][^ ]* / /
-s/ --bu[a-z-]*[= ][^ ]* / /
-s/ --t[a-z-]*[= ][^ ]* / /
-s/ --program-[pst][a-z-]*[= ][^ ]* / /
-s/ -cache-file[= ][^ ]* / /
-s/ -srcdir[= ][^ ]* / /
-s/ -host[= ][^ ]* / /
-s/ -build[= ][^ ]* / /
-s/ -target[= ][^ ]* / /
-s/ -program-prefix[= ][^ ]* / /
-s/ -program-suffix[= ][^ ]* / /
-s/ -program-transform-name[= ][^ ]* / /
+s/ --no[^ ]*/ /g
+s/ --c[a-z-]*[= ][^ ]*//g
+s/ --sr[a-z-]*[= ][^ ]*//g
+s/ --ho[a-z-]*[= ][^ ]*//g
+s/ --bu[a-z-]*[= ][^ ]*//g
+s/ --t[a-z-]*[= ][^ ]*//g
+s/ --program-[pst][a-z-]*[= ][^ ]*//g
+s/ -cache-file[= ][^ ]*//g
+s/ -srcdir[= ][^ ]*//g
+s/ -host[= ][^ ]*//g
+s/ -build[= ][^ ]*//g
+s/ -target[= ][^ ]*//g
+s/ -program-prefix[= ][^ ]*//g
+s/ -program-suffix[= ][^ ]*//g
+s/ -program-transform-name[= ][^ ]*//g
s/ [^' -][^ ]* / /
s/^ *//;s/ *$//
s,\$,$$,g
-
# Build module lists & subconfigure args.
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3223: checking for $ac_word" >&5
+echo "configure:3245: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3256: checking for $ac_word" >&5
+echo "configure:3278: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3295: checking for $ac_word" >&5
+echo "configure:3317: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3328: checking for $ac_word" >&5
+echo "configure:3350: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3367: checking for $ac_word" >&5
+echo "configure:3389: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3400: checking for $ac_word" >&5
+echo "configure:3422: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3439: checking for $ac_word" >&5
+echo "configure:3461: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3472: checking for $ac_word" >&5
+echo "configure:3494: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3511: checking for $ac_word" >&5
+echo "configure:3533: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3544: checking for $ac_word" >&5
+echo "configure:3566: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3583: checking for $ac_word" >&5
+echo "configure:3605: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3616: checking for $ac_word" >&5
+echo "configure:3638: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3655: checking for $ac_word" >&5
+echo "configure:3677: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3688: checking for $ac_word" >&5
+echo "configure:3710: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3727: checking for $ac_word" >&5
+echo "configure:3749: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3760: checking for $ac_word" >&5
+echo "configure:3782: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3799: checking for $ac_word" >&5
+echo "configure:3821: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3832: checking for $ac_word" >&5
+echo "configure:3854: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3881: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:3903: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AR_FOR_TARGET"; then
- ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$CONFIGURED_AR_FOR_TARGET"; then
+ ac_cv_prog_CONFIGURED_AR_FOR_TARGET="$CONFIGURED_AR_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
+ ac_cv_prog_CONFIGURED_AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
-if test -n "$AR_FOR_TARGET"; then
- echo "$ac_t""$AR_FOR_TARGET" 1>&6
+CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_CONFIGURED_AR_FOR_TARGET"
+if test -n "$CONFIGURED_AR_FOR_TARGET"; then
+ echo "$ac_t""$CONFIGURED_AR_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
fi
-if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
+if test -z "$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_cv_AR_FOR_TARGET=$AR_FOR_TARGET
+ ncn_cv_CONFIGURED_AR_FOR_TARGET=$CONFIGURED_AR_FOR_TARGET
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3914: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:3936: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_AR_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_AR_FOR_TARGET="$ncn_cv_AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_CONFIGURED_AR_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="$ncn_cv_CONFIGURED_AR_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar"
+ ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="ar"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_AR_FOR_TARGET" && ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar"
+ test -z "$ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="ar"
fi
fi
-ncn_cv_AR_FOR_TARGET="$ac_cv_prog_ncn_cv_AR_FOR_TARGET"
-if test -n "$ncn_cv_AR_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_AR_FOR_TARGET" 1>&6
+ncn_cv_CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET"
+if test -n "$ncn_cv_CONFIGURED_AR_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_CONFIGURED_AR_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- AR_FOR_TARGET=$ncn_cv_AR_FOR_TARGET
+ CONFIGURED_AR_FOR_TARGET=$ncn_cv_CONFIGURED_AR_FOR_TARGET
else
- AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
+ CONFIGURED_AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
fi
else
- AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+ CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_CONFIGURED_AR_FOR_TARGET"
fi
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3953: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:3975: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$AS_FOR_TARGET"; then
- ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$CONFIGURED_AS_FOR_TARGET"; then
+ ac_cv_prog_CONFIGURED_AS_FOR_TARGET="$CONFIGURED_AS_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}as"
+ ac_cv_prog_CONFIGURED_AS_FOR_TARGET="${ncn_target_tool_prefix}as"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
-if test -n "$AS_FOR_TARGET"; then
- echo "$ac_t""$AS_FOR_TARGET" 1>&6
+CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_CONFIGURED_AS_FOR_TARGET"
+if test -n "$CONFIGURED_AS_FOR_TARGET"; then
+ echo "$ac_t""$CONFIGURED_AS_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
fi
-if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
+if test -z "$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_cv_AS_FOR_TARGET=$AS_FOR_TARGET
+ ncn_cv_CONFIGURED_AS_FOR_TARGET=$CONFIGURED_AS_FOR_TARGET
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3986: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4008: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_AS_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_AS_FOR_TARGET="$ncn_cv_AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_CONFIGURED_AS_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="$ncn_cv_CONFIGURED_AS_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_AS_FOR_TARGET="as"
+ ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="as"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_AS_FOR_TARGET" && ac_cv_prog_ncn_cv_AS_FOR_TARGET="as"
+ test -z "$ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="as"
fi
fi
-ncn_cv_AS_FOR_TARGET="$ac_cv_prog_ncn_cv_AS_FOR_TARGET"
-if test -n "$ncn_cv_AS_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_AS_FOR_TARGET" 1>&6
+ncn_cv_CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET"
+if test -n "$ncn_cv_CONFIGURED_AS_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_CONFIGURED_AS_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- AS_FOR_TARGET=$ncn_cv_AS_FOR_TARGET
+ CONFIGURED_AS_FOR_TARGET=$ncn_cv_CONFIGURED_AS_FOR_TARGET
else
- AS_FOR_TARGET="${ncn_target_tool_prefix}as"
+ CONFIGURED_AS_FOR_TARGET="${ncn_target_tool_prefix}as"
fi
else
- AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+ CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_CONFIGURED_AS_FOR_TARGET"
fi
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4025: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4047: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$CONFIGURED_DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET="$CONFIGURED_DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
+ ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
-if test -n "$DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
+CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET"
+if test -n "$CONFIGURED_DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$CONFIGURED_DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
fi
-if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
+if test -z "$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_cv_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
+ ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET=$CONFIGURED_DLLTOOL_FOR_TARGET
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4058: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4080: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="$ncn_cv_DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool"
+ ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="dlltool"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET" && ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool"
+ test -z "$ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="dlltool"
fi
fi
-ncn_cv_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET"
-if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_DLLTOOL_FOR_TARGET" 1>&6
+ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"
+if test -n "$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- DLLTOOL_FOR_TARGET=$ncn_cv_DLLTOOL_FOR_TARGET
+ CONFIGURED_DLLTOOL_FOR_TARGET=$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET
else
- DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
+ CONFIGURED_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
fi
else
- DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+ CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET"
fi
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4097: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4119: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$LD_FOR_TARGET"; then
- ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test.
+ if test -n "$CONFIGURED_LD_FOR_TARGET"; then
+ ac_cv_prog_CONFIGURED_LD_FOR_TARGET="$CONFIGURED_LD_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
+ ac_cv_prog_CONFIGURED_LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
-if test -n "$LD_FOR_TARGET"; then
- echo "$ac_t""$LD_FOR_TARGET" 1>&6
+CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_CONFIGURED_LD_FOR_TARGET"
+if test -n "$CONFIGURED_LD_FOR_TARGET"; then
+ echo "$ac_t""$CONFIGURED_LD_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
fi
-if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
+if test -z "$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_cv_LD_FOR_TARGET=$LD_FOR_TARGET
+ ncn_cv_CONFIGURED_LD_FOR_TARGET=$CONFIGURED_LD_FOR_TARGET
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4130: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4152: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_LD_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_LD_FOR_TARGET="$ncn_cv_LD_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_CONFIGURED_LD_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="$ncn_cv_CONFIGURED_LD_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld"
+ ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="ld"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_LD_FOR_TARGET" && ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld"
+ test -z "$ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="ld"
fi
fi
-ncn_cv_LD_FOR_TARGET="$ac_cv_prog_ncn_cv_LD_FOR_TARGET"
-if test -n "$ncn_cv_LD_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_LD_FOR_TARGET" 1>&6
+ncn_cv_CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET"
+if test -n "$ncn_cv_CONFIGURED_LD_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_CONFIGURED_LD_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- LD_FOR_TARGET=$ncn_cv_LD_FOR_TARGET
+ CONFIGURED_LD_FOR_TARGET=$ncn_cv_CONFIGURED_LD_FOR_TARGET
else
- LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
+ CONFIGURED_LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
fi
else
- LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
+ CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_CONFIGURED_LD_FOR_TARGET"
fi
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4169: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4191: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$NM_FOR_TARGET"; then
- ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
+ if test -n "$CONFIGURED_NM_FOR_TARGET"; then
+ ac_cv_prog_CONFIGURED_NM_FOR_TARGET="$CONFIGURED_NM_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
+ ac_cv_prog_CONFIGURED_NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
-if test -n "$NM_FOR_TARGET"; then
- echo "$ac_t""$NM_FOR_TARGET" 1>&6
+CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_CONFIGURED_NM_FOR_TARGET"
+if test -n "$CONFIGURED_NM_FOR_TARGET"; then
+ echo "$ac_t""$CONFIGURED_NM_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
fi
-if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
+if test -z "$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_cv_NM_FOR_TARGET=$NM_FOR_TARGET
+ ncn_cv_CONFIGURED_NM_FOR_TARGET=$CONFIGURED_NM_FOR_TARGET
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4202: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4224: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_NM_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_NM_FOR_TARGET="$ncn_cv_NM_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_CONFIGURED_NM_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="$ncn_cv_CONFIGURED_NM_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm"
+ ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="nm"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_NM_FOR_TARGET" && ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm"
+ test -z "$ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="nm"
fi
fi
-ncn_cv_NM_FOR_TARGET="$ac_cv_prog_ncn_cv_NM_FOR_TARGET"
-if test -n "$ncn_cv_NM_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_NM_FOR_TARGET" 1>&6
+ncn_cv_CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET"
+if test -n "$ncn_cv_CONFIGURED_NM_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_CONFIGURED_NM_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- NM_FOR_TARGET=$ncn_cv_NM_FOR_TARGET
+ CONFIGURED_NM_FOR_TARGET=$ncn_cv_CONFIGURED_NM_FOR_TARGET
else
- NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
+ CONFIGURED_NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
fi
else
- NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
+ CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_CONFIGURED_NM_FOR_TARGET"
fi
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4241: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4263: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$RANLIB_FOR_TARGET"; then
- ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test.
+ if test -n "$CONFIGURED_RANLIB_FOR_TARGET"; then
+ ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET="$CONFIGURED_RANLIB_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}ranlib"
+ ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}ranlib"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET"
-if test -n "$RANLIB_FOR_TARGET"; then
- echo "$ac_t""$RANLIB_FOR_TARGET" 1>&6
+CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET"
+if test -n "$CONFIGURED_RANLIB_FOR_TARGET"; then
+ echo "$ac_t""$CONFIGURED_RANLIB_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
fi
-if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
+if test -z "$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_cv_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
+ ncn_cv_CONFIGURED_RANLIB_FOR_TARGET=$CONFIGURED_RANLIB_FOR_TARGET
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4274: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4296: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="$ncn_cv_RANLIB_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="ranlib"
+ ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="ranlib"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET=":"
+ test -z "$ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET=":"
fi
fi
-ncn_cv_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET"
-if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_RANLIB_FOR_TARGET" 1>&6
+ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"
+if test -n "$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- RANLIB_FOR_TARGET=$ncn_cv_RANLIB_FOR_TARGET
+ CONFIGURED_RANLIB_FOR_TARGET=$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET
else
- RANLIB_FOR_TARGET=":"
+ CONFIGURED_RANLIB_FOR_TARGET=":"
fi
else
- RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET"
+ CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET"
fi
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4313: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4335: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$WINDRES_FOR_TARGET"; then
- ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test.
+ if test -n "$CONFIGURED_WINDRES_FOR_TARGET"; then
+ ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET="$CONFIGURED_WINDRES_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
+ ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
-if test -n "$WINDRES_FOR_TARGET"; then
- echo "$ac_t""$WINDRES_FOR_TARGET" 1>&6
+CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET"
+if test -n "$CONFIGURED_WINDRES_FOR_TARGET"; then
+ echo "$ac_t""$CONFIGURED_WINDRES_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
fi
-if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
+if test -z "$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_cv_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
+ ncn_cv_CONFIGURED_WINDRES_FOR_TARGET=$CONFIGURED_WINDRES_FOR_TARGET
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4346: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4368: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="$ncn_cv_WINDRES_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres"
+ ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="windres"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET" && ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres"
+ test -z "$ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="windres"
fi
fi
-ncn_cv_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET"
-if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_WINDRES_FOR_TARGET" 1>&6
+ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"
+if test -n "$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- WINDRES_FOR_TARGET=$ncn_cv_WINDRES_FOR_TARGET
+ CONFIGURED_WINDRES_FOR_TARGET=$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET
else
- WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
+ CONFIGURED_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
fi
else
- WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
+ CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET"
fi
NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
+else
+ # Just use the ones we found.
+ AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)"
+ AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)"
+ DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)"
+ LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)"
+ NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)"
+ RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)"
+ WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)"
fi
+
+
+
+
+
+
+
+
# Certain tools may need extra flags.
AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4413: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4452: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
fi
MAINT=$MAINTAINER_MODE_TRUE
+# ---------------------
+# GCC bootstrap support
+# ---------------------
+
+# Stage specific cflags for build.
+stage1_cflags="-g"
+case $build in
+ vax-*-*)
+ case ${GCC} in
+ yes) stage1_cflags="-g -Wa,-J" ;;
+ *) stage1_cflags="-g -J" ;;
+ esac ;;
+ powerpc-*-darwin*)
+ # The spiffy cpp-precomp chokes on some legitimate constructs in GCC
+ # sources; use -no-cpp-precomp to get to GNU cpp.
+ # Apple's GCC has bugs in designated initializer handling, so disable
+ # that too.
+ stage1_cflags="-g -no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0"
+ ;;
+esac
+
+
+# Enable -Werror in bootstrap stage2 and later.
+# Change the default to "no" on release branches.
+# Check whether --enable-werror or --disable-werror was given.
+if test "${enable_werror+set}" = set; then
+ enableval="$enable_werror"
+ :
+else
+ enable_werror=yes
+fi
+
+case ${enable_werror} in
+ yes) stage2_werror_flag="--enable-werror-always" ;;
+ *) stage2_werror_flag="" ;;
+esac
+
+
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
s%@target_subdir@%$target_subdir%g
s%@CC@%$CC%g
s%@GNATBIND@%$GNATBIND%g
+s%@stage1_languages@%$stage1_languages%g
+s%@DEFAULT_YACC@%$DEFAULT_YACC%g
+s%@DEFAULT_M4@%$DEFAULT_M4%g
+s%@DEFAULT_LEX@%$DEFAULT_LEX%g
/@maybe_dependencies@/r $maybe_dependencies
s%@maybe_dependencies@%%g
/@serialization_dependencies@/r $serialization_dependencies
s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
s%@BUILD_PREFIX@%$BUILD_PREFIX%g
s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g
-s%@configlinks@%$configlinks%g
s%@gcc_version_trigger@%$gcc_version_trigger%g
s%@gcc_version@%$gcc_version%g
s%@tooldir@%$tooldir%g
s%@ncn_cv_OBJDUMP@%$ncn_cv_OBJDUMP%g
s%@CXX@%$CXX%g
s%@CFLAGS_FOR_BUILD@%$CFLAGS_FOR_BUILD%g
-s%@DEFAULT_YACC@%$DEFAULT_YACC%g
-s%@DEFAULT_LEX@%$DEFAULT_LEX%g
-s%@DEFAULT_M4@%$DEFAULT_M4%g
-s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
-s%@ncn_cv_AR_FOR_TARGET@%$ncn_cv_AR_FOR_TARGET%g
-s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
-s%@ncn_cv_AS_FOR_TARGET@%$ncn_cv_AS_FOR_TARGET%g
-s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
-s%@ncn_cv_DLLTOOL_FOR_TARGET@%$ncn_cv_DLLTOOL_FOR_TARGET%g
-s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
-s%@ncn_cv_LD_FOR_TARGET@%$ncn_cv_LD_FOR_TARGET%g
-s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g
-s%@ncn_cv_NM_FOR_TARGET@%$ncn_cv_NM_FOR_TARGET%g
-s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g
-s%@ncn_cv_RANLIB_FOR_TARGET@%$ncn_cv_RANLIB_FOR_TARGET%g
-s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g
-s%@ncn_cv_WINDRES_FOR_TARGET@%$ncn_cv_WINDRES_FOR_TARGET%g
+s%@CONFIGURED_AR_FOR_TARGET@%$CONFIGURED_AR_FOR_TARGET%g
+s%@ncn_cv_CONFIGURED_AR_FOR_TARGET@%$ncn_cv_CONFIGURED_AR_FOR_TARGET%g
+s%@CONFIGURED_AS_FOR_TARGET@%$CONFIGURED_AS_FOR_TARGET%g
+s%@ncn_cv_CONFIGURED_AS_FOR_TARGET@%$ncn_cv_CONFIGURED_AS_FOR_TARGET%g
+s%@CONFIGURED_DLLTOOL_FOR_TARGET@%$CONFIGURED_DLLTOOL_FOR_TARGET%g
+s%@ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET@%$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET%g
+s%@CONFIGURED_LD_FOR_TARGET@%$CONFIGURED_LD_FOR_TARGET%g
+s%@ncn_cv_CONFIGURED_LD_FOR_TARGET@%$ncn_cv_CONFIGURED_LD_FOR_TARGET%g
+s%@CONFIGURED_NM_FOR_TARGET@%$CONFIGURED_NM_FOR_TARGET%g
+s%@ncn_cv_CONFIGURED_NM_FOR_TARGET@%$ncn_cv_CONFIGURED_NM_FOR_TARGET%g
+s%@CONFIGURED_RANLIB_FOR_TARGET@%$CONFIGURED_RANLIB_FOR_TARGET%g
+s%@ncn_cv_CONFIGURED_RANLIB_FOR_TARGET@%$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET%g
+s%@CONFIGURED_WINDRES_FOR_TARGET@%$CONFIGURED_WINDRES_FOR_TARGET%g
+s%@ncn_cv_CONFIGURED_WINDRES_FOR_TARGET@%$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET%g
s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g
s%@FLAGS_FOR_TARGET@%$FLAGS_FOR_TARGET%g
s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
s%@RAW_CXX_FOR_TARGET@%$RAW_CXX_FOR_TARGET%g
s%@CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
s%@RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
+s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
+s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
+s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
+s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
+s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g
+s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g
+s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
+s%@stage1_cflags@%$stage1_cflags%g
+s%@stage2_werror_flag@%$stage2_werror_flag%g
CEOF
EOF