AC_PROG_SED
AC_PROG_AWK
-### we might need to use some other shell than /bin/sh for running subshells
-### If we are on Windows, search for the shell. This will permit people
-### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
-### without also having to set CONFIG_SHELL. This code will work when
-### using bash, which sets OSTYPE.
-case "${OSTYPE}" in
-*win32*)
- if test x${CONFIG_SHELL} = x ; then
- if test ! -f /bin/sh ; then
- if test x${SHELL} != x && test -f ${SHELL} ; then
- CONFIG_SHELL=${SHELL}
- export CONFIG_SHELL
- else
- for prog in sh sh.exe bash bash.exe; do
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$prog; then
- CONFIG_SHELL=$dir/$prog
- export CONFIG_SHELL
- break
- fi
- done
- IFS="$save_ifs"
- test -n "${CONFIG_SHELL}" && break
- done
- fi
- fi
- fi
- ;;
-esac
-
-config_shell=${CONFIG_SHELL-/bin/sh}
-
-moveifchange=${srcdir}/move-if-change
-
srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
# We pass INSTALL explicitly to sub-makes. Make sure that it is not
build_libs="build-libiberty"
# these tools are built for the build environment
-build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fixincludes"
+build_tools="build-texinfo build-flex build-bison build-m4 build-fixincludes"
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
+host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
# If --enable-gold is used, "gold" may replace "ld".
-host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc cgen sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
+host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
target-zlib \
- target-qthreads \
target-libjava"
# these libraries are built for the target environment, and are built after
# note: any program that *uses* libraries that are in the "target_libraries"
# list belongs in this list.
#
-target_tools="target-examples target-gperf target-rda"
+target_tools="target-rda"
################################################################################
;;
*-*-netbsd* | *-*-freebsd* | *-*-openbsd* | *-*-dragonfly*)
;;
- *-*-solaris2* | *-*-sysv4* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
+ *-*-solaris2* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
;;
*-*-darwin* | *-*-aix*)
;;
esac
fi
+# Disable libssp for some systems.
+case "${target}" in
+ avr-*-*)
+ # No hosted I/O support.
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
+ powerpc-*-aix* | rs6000-*-aix*)
+ noconfigdirs="$noconfigdirs target-libssp"
+ ;;
+esac
+
+# Disable target libiberty for some systems.
+case "${target}" in
+ *-*-kaos*)
+ # Remove unsupported stuff on all kaOS configurations.
+ skipdirs="target-libiberty"
+ ;;
+ *-*-netbsd*)
+ # Skip some stuff on all NetBSD configurations.
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ *-*-netware*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ *-*-rtems*)
+ skipdirs="${skipdirs} target-libiberty"
+ ;;
+ *-*-tpf*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ *-*-vxworks*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ arm*-*-symbianelf*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ avr-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ picochip-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+ mips*-sde-elf*)
+ skipdirs="$skipdirs target-libiberty"
+ ;;
+ ip2k-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty"
+ ;;
+esac
+
+# Disable libstdc++-v3 for some systems.
+case "${target}" in
+ *-*-vxworks*)
+ # VxWorks uses the Dinkumware C++ library.
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ arm*-wince-pe*)
+ # the C++ libraries don't build on top of CE's C libraries
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ avr-*-*)
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+esac
+
+# Disable Fortran for some systems.
+case "${target}" in
+ mmix-*-*)
+ # See <http://gcc.gnu.org/ml/gcc-patches/2004-11/msg00572.html>.
+ unsupported_languages="$unsupported_languages fortran"
+ ;;
+esac
+
# Default libgloss CPU subdirectory.
libgloss_dir="$target_cpu"
;;
*-*-kaos*)
# Remove unsupported stuff on all kaOS configurations.
- skipdirs="target-libiberty"
noconfigdirs="$noconfigdirs target-libgloss"
;;
*-*-netbsd*)
# Skip some stuff on all NetBSD configurations.
- noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
# Skip some stuff that's unsupported on some NetBSD configurations.
case "${target}" in
esac
;;
*-*-netware*)
- noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
*-*-rtems*)
- skipdirs="${skipdirs} target-libiberty"
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
# The tpf target doesn't support gdb yet.
*-*-tpf*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} gdb tcl tk libgui itcl"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj} gdb tcl tk libgui itcl"
;;
*-*-uclinux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
;;
*-*-vxworks*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
noconfigdirs="$noconfigdirs ${libgcj}"
- noconfigdirs="$noconfigdirs target-libiberty"
noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
- # the C++ libraries don't build on top of CE's C libraries
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
noconfigdirs="$noconfigdirs target-newlib"
libgloss_dir=wince
;;
libgloss_dir=arm
;;
arm*-*-symbianelf*)
- noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
+ noconfigdirs="$noconfigdirs ${libgcj}"
libgloss_dir=arm
;;
arm-*-pe*)
noconfigdirs="$noconfigdirs ld target-libgloss"
;;
avr-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj} target-libssp"
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
bfin-*-*)
unsupported_languages="$unsupported_languages java"
noconfigdirs="$noconfigdirs ${libgcj}"
;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
- noconfigdirs="$noconfigdirs target-libiberty"
libgloss_dir=m68hc11
;;
m68k-*-elf*)
;;
mmix-*-*)
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb"
- unsupported_languages="$unsupported_languages fortran java"
+ unsupported_languages="$unsupported_languages java"
;;
mt-*-*)
noconfigdirs="$noconfigdirs sim"
;;
- picochip-*-*)
- noconfigdirs="$noconfigdirs target-libiberty"
- ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-newlib ${libgcj}"
;;
powerpc*-*-winnt* | powerpc*-*-pe*)
target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-newlib ${libgcj}"
;;
rs6000-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss"
;;
microblaze*)
- noconfigdirs="$noconfigdirs gprof target-libssp ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof ${libgcj}"
;;
mips*-sde-elf*)
- skipdirs="$skipdirs target-libiberty"
noconfigdirs="$noconfigdirs ${libgcj}"
if test x$with_newlib = xyes; then
noconfigdirs="$noconfigdirs gprof"
vax-*-*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- ip2k-*-*)
- noconfigdirs="$noconfigdirs target-libiberty"
- ;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
# the *-*-osname triplets last.
md_exec_prefix=
case "${target}" in
- alpha*-*-*vms*)
- md_exec_prefix=/gnu/lib/gcc-lib
- ;;
i[[34567]]86-pc-msdosdjgpp*)
md_exec_prefix=/dev/env/DJDIR/bin
;;
- i[[34567]]86-*-sco3.2v5*)
- if test $with_gnu_as = yes; then
- md_exec_prefix=/usr/gnu/bin
- else
- md_exec_prefix=/usr/ccs/bin/elf
- fi
- ;;
-
- mn10300-*-* | \
- powerpc-*-chorusos* | \
- powerpc*-*-eabi* | \
- powerpc*-*-sysv* | \
- powerpc*-*-kaos* | \
- s390x-ibm-tpf*)
- md_exec_prefix=/usr/ccs/bin
- ;;
- sparc64-*-elf*)
- ;;
- v850*-*-*)
- md_exec_prefix=/usr/ccs/bin
- ;;
- xtensa*-*-elf*)
- ;;
-
- *-*-beos* | \
- *-*-elf* | \
*-*-hpux* | \
- *-*-netware* | \
*-*-nto-qnx* | \
- *-*-rtems* | \
- *-*-solaris2* | \
- *-*-sysv[[45]]* | \
- *-*-vxworks* | \
- *-wrs-windiss)
+ *-*-solaris2*)
md_exec_prefix=/usr/ccs/bin
;;
esac
AC_SUBST(RANLIB_FOR_BUILD)
AC_SUBST(WINDMC_FOR_BUILD)
AC_SUBST(WINDRES_FOR_BUILD)
-AC_SUBST(config_shell)
# Generate default definitions for YACC, M4, LEX and other programs that run
# on the build machine. These are used if the Makefile can't locate these
AC_CHECK_PROGS([YACC], ['bison -y' byacc yacc], [$MISSING bison -y])
case " $build_configdirs " in
*" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
- *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;;
esac
AC_CHECK_PROGS([BISON], [bison], [$MISSING bison])
projects / deliverable / binutils-gdb.git / blobdiff