# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-# 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation,
+# Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
##############################################################################
### WARNING: this file contains embedded tabs. Do not run untabify on this file.
-sinclude(config/acx.m4)
+m4_include(config/acx.m4)
+m4_include(config/override.m4)
m4_include(config/proginstall.m4)
AC_INIT(move-if-change)
AC_PREREQ(2.59)
+progname=$0
+# if PWD already has a value, it is probably wrong.
+if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
+
+# Export original configure arguments for use by sub-configures.
+# Quote arguments with shell meta charatcers.
+TOPLEVEL_CONFIGURE_ARGUMENTS=
+set -- "$progname" "$@"
+for ac_arg
+do
+ case "$ac_arg" in
+ *" "*|*" "*|*[[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\']]*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
+ # if the argument is of the form -foo=baz, quote the baz part only
+ ac_arg=`echo "'$ac_arg'" | sed "s/^'\([[-a-zA-Z0-9]]*=\)/\\1'/"` ;;
+ *) ;;
+ esac
+ # Add the quoted argument to the list.
+ TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS $ac_arg"
+done
+if test "$silent" = yes; then
+ TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS --silent"
+fi
+# Remove the initial space we just introduced and, as these will be
+# expanded by make, quote '$'.
+TOPLEVEL_CONFIGURE_ARGUMENTS=`echo "x$TOPLEVEL_CONFIGURE_ARGUMENTS" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
+AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)
+
# Find the build, host, and target systems.
ACX_NONCANONICAL_BUILD
ACX_NONCANONICAL_HOST
config_shell=${CONFIG_SHELL-/bin/sh}
-progname=$0
-# if PWD already has a value, it is probably wrong.
-if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
-
-# Export original configure arguments for use by sub-configures.
-# Quote arguments with shell meta charatcers.
-TOPLEVEL_CONFIGURE_ARGUMENTS=
-set -- "$progname" "$@"
-for ac_arg
-do
- case "$ac_arg" in
- *" "*|*" "*|*[[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\']]*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
- # if the argument is of the form -foo=baz, quote the baz part only
- ac_arg=`echo "'$ac_arg'" | sed "s/^'\([[-a-zA-Z0-9]]*=\)/\\1'/"` ;;
- *) ;;
- esac
- # Add the quoted argument to the list.
- TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS $ac_arg"
-done
-if test "$silent" = yes; then
- TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS --silent"
-fi
-# Remove the initial space we just introduced and, as these will be
-# expanded by make, quote '$'.
-TOPLEVEL_CONFIGURE_ARGUMENTS=`echo "x$TOPLEVEL_CONFIGURE_ARGUMENTS" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
-AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)
-
moveifchange=${srcdir}/move-if-change
srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr ppl cloog"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
if test "$is_elf" = "yes"; then
# Check for target supported by gold.
case "${target}" in
- i?86-*-* | x86_64-*-*)
+ i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-*)
configdirs="`echo " ${configdirs} " | sed -e 's/ ld / gold /'`"
;;
esac
*-*-chorusos)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- powerpc-*-darwin* | i[[3456789]]86-*-darwin* | x86_64-*-darwin9*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+ powerpc-*-darwin* | x86_64-*-darwin[[912]]*)
+ noconfigdirs="$noconfigdirs ld gas gdb gprof"
+ noconfigdirs="$noconfigdirs sim target-rda"
+ ;;
+ i[[3456789]]86-*-darwin*)
+ noconfigdirs="$noconfigdirs ld gas gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
*-*-darwin*)
;;
arm*-*-linux-gnueabi)
noconfigdirs="$noconfigdirs target-qthreads"
- noconfigdirs="$noconfigdirs target-libobjc"
case ${with_newlib} in
no) noconfigdirs="$noconfigdirs target-newlib target-libgloss"
esac
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
avr-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj} target-libssp"
;;
bfin-*-*)
noconfigdirs="$noconfigdirs gdb"
c54x*-*-* | tic54x-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
;;
+ cr16-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj} gdb"
+ ;;
cris-*-* | crisv32-*-*)
unsupported_languages="$unsupported_languages java"
case "${target}" in
# No gdb or ld support yet.
noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
;;
+ ia64*-*-*vms*)
+ # No gdb or ld support yet.
+ noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
+ ;;
i370-*-opened*)
;;
i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
;;
sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
;;
- spu-*-*)
- skipdirs="target-libssp"
- ;;
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
;;
host_makefile_frag="config/mh-djgpp"
;;
*-cygwin*)
+ ACX_CHECK_CYGWIN_CAT_WORKS
host_makefile_frag="config/mh-cygwin"
;;
- *-mingw32*)
- host_makefile_frag="config/mh-mingw"
- ;;
- *-mingw64*)
+ *-mingw*)
host_makefile_frag="config/mh-mingw"
;;
*-interix*)
# without overflowing the jump tables (-J says to use a 32 bit table)
tentative_cc="cc -J"
;;
- *-hp-hpux*)
+ hppa*-hp-hpux10*)
+ tentative_cc="cc -Wp,-H256000"
+ host_makefile_frag="config/mh-pa-hpux10"
+ ;;
+ hppa*-hp-hpux* | hppa*-*-hiux*)
tentative_cc="cc -Wp,-H256000"
+ host_makefile_frag="config/mh-pa"
;;
- *-*-hiux*)
+ hppa*-*)
+ host_makefile_frag="config/mh-pa"
+ ;;
+ *-hp-hpux* | *-*-hiux*)
tentative_cc="cc -Wp,-H256000"
;;
rs6000-*-lynxos*)
if test x"$have_gmp" = xyes; then
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
- dnl MPFR 2.2.1 is acceptable, but MPFR 2.3.0 is better.
+ dnl MPFR 2.3.0 is acceptable, but MPFR 2.3.2 is better.
AC_MSG_CHECKING([for correct version of mpfr.h])
AC_TRY_LINK([#include <gmp.h>
#include <mpfr.h>],[
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,2,1)
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,0)
choke me
#endif
mpfr_t n;
mpfr_subnormalize (x, t, GMP_RNDN);
], [AC_TRY_LINK([#include <gmp.h>
#include <mpfr.h>],[
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,0)
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,2)
choke me
#endif
mpfr_t n; mpfr_init(n);
CFLAGS="$saved_CFLAGS"
if test x$have_gmp != xyes; then
- AC_MSG_ERROR([Building GCC requires GMP 4.1+ and MPFR 2.3.0+.
+ AC_MSG_ERROR([Building GCC requires GMP 4.1+ and MPFR 2.3.2+.
Try the --with-gmp and/or --with-mpfr options to specify their locations.
Copies of these libraries' source code can be found at their respective
hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
AC_SUBST(gmplibs)
AC_SUBST(gmpinc)
+
+# Check for PPL
+ppl_major_version=0
+ppl_minor_version=10
+ppllibs=" -lppl_c -lppl -lgmpxx "
+pplinc=
+
+AC_ARG_WITH(ppl, [ --with-ppl=PATH Specify prefix directory for the installed PPL package
+ Equivalent to --with-ppl-include=PATH/include
+ plus --with-ppl-lib=PATH/lib])
+AC_ARG_WITH(ppl_include, [ --with-ppl-include=PATH Specify directory for installed PPL include files])
+AC_ARG_WITH(ppl_lib, [ --with-ppl-lib=PATH Specify the directory for the installed PPL library])
+
+if test "x$with_ppl" != x; then
+ ppllibs="-L$with_ppl/lib -lppl_c -lppl -lgmpxx"
+ pplinc="-I$with_ppl/include $pplinc"
+ LIBS="$ppllibs $LIBS"
+fi
+if test "x$with_ppl_include" != x; then
+ pplinc="-I$with_ppl_include $pplinc"
+fi
+if test "x$with_ppl_lib" != x; then
+ ppllibs="-L$with_ppl_lib -lppl_c -lppl -lgmpxx"
+ LIBS="$ppllibs $LIBS"
+fi
+if test "x$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
+ ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/.libs -L$$r/$(HOST_SUBDIR)/ppl/_libs -lppl_c -lppl -lgmpxx '
+ pplinc='-I$$r/$(HOST_SUBDIR)/ppl/include -I$$s/ppl/include '
+ LIBS="$ppllibs $LIBS"
+fi
+
+AC_ARG_ENABLE(ppl-version-check,
+[ --disable-ppl-version-check disable check for PPL version],
+ENABLE_PPL_CHECK=$enableval,
+ENABLE_PPL_CHECK=yes)
+
+if test "${ENABLE_PPL_CHECK}" = "yes"; then
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $pplinc $gmpinc"
+ AC_MSG_CHECKING([for version $ppl_major_version.$ppl_minor_version of PPL])
+ AC_TRY_COMPILE([#include "ppl_c.h"],[
+ #if PPL_VERSION_MAJOR != $ppl_major_version || PPL_VERSION_MINOR != $ppl_minor_version
+ choke me
+ #endif
+ ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ])
+ CFLAGS="$saved_CFLAGS"
+fi
+
+# Flags needed for PPL
+AC_SUBST(ppllibs)
+AC_SUBST(pplinc)
+
+
+# Check for CLOOG
+clooglibs=" -lcloog "
+clooginc=" -DCLOOG_PPL_BACKEND "
+
+AC_ARG_WITH(cloog, [ --with-cloog=PATH Specify prefix directory for the installed CLooG-PPL package
+ Equivalent to --with-cloog-include=PATH/include
+ plus --with-cloog-lib=PATH/lib])
+AC_ARG_WITH(cloog_include, [ --with-cloog-include=PATH Specify directory for installed CLooG include files])
+AC_ARG_WITH(cloog_lib, [ --with-cloog-lib=PATH Specify the directory for the installed CLooG library])
+AC_ARG_WITH(cloog-polylib, [ --with-cloog-polylib=PATH Specify prefix directory for the installed CLooG-PolyLib package])
+
+if test "x$with_cloog" != x; then
+ clooglibs="-L$with_cloog/lib -lcloog"
+ clooginc="-I$with_cloog/include -DCLOOG_PPL_BACKEND "
+ LIBS="$clooglibs $LIBS"
+fi
+if test "x$with_cloog_polylib" != x; then
+ clooglibs="-L$with_cloog/lib -lcloog"
+ clooginc="-I$with_cloog/include "
+ LIBS="$clooglibs $LIBS"
+fi
+if test "x$with_cloog_include" != x; then
+ clooginc="-I$with_cloog_include -DCLOOG_PPL_BACKEND "
+fi
+if test "x$with_cloog_lib" != x; then
+ clooglibs="-L$with_cloog_lib -lcloog"
+ LIBS="$clooglibs $LIBS"
+fi
+if test "x$with_cloog$with_cloog_include$with_cloog_lib" = x && test -d ${srcdir}/cloog; then
+ clooglibs='-L$$r/$(HOST_SUBDIR)/cloog/.libs -L$$r/$(HOST_SUBDIR)/cloog/_libs -lcloog '
+ clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include -DCLOOG_PPL_BACKEND '
+ LIBS="$clooglibs $LIBS"
+fi
+
+AC_ARG_ENABLE(cloog-version-check,
+[ --disable-cloog-version-check disable check for CLooG version],
+ENABLE_CLOOG_CHECK=$enableval,
+ENABLE_CLOOG_CHECK=yes)
+
+if test "${ENABLE_CLOOG_CHECK}" = "yes"; then
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $clooginc $gmpinc $pplinc"
+ AC_MSG_CHECKING([for correct version of CLooG])
+ AC_TRY_COMPILE([#include "cloog/cloog.h"],[
+ #if CLOOG_VERSION_MAJOR != 0 || CLOOG_VERSION_MINOR != 15
+ choke me
+ #endif
+ ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); clooglibs= ; clooginc= ])
+ CFLAGS="$saved_CFLAGS"
+fi
+
+# Flags needed for CLOOG
+AC_SUBST(clooglibs)
+AC_SUBST(clooginc)
+
+
# By default, C is the only stage 1 language.
stage1_languages=,c,
mipsisa*-*-elfoabi*)
target_makefile_frag="config/mt-mips-elfoabi"
;;
+ mips*-*-*linux* | mips*-*-gnu*)
+ target_makefile_frag="config/mt-mips-gnu"
+ ;;
*-*-netware*)
target_makefile_frag="config/mt-netware"
;;
;;
esac
+# Decide which environment variable is used to find dynamic libraries.
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
*-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+ *-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac
+# On systems where the dynamic library environment variable is PATH,
+# gcc/ will put dynamic libraries into a subdirectory to avoid adding
+# built executables to PATH.
+if test "$RPATH_ENVVAR" = PATH; then
+ GCC_SHLIB_SUBDIR=/shlib
+else
+ GCC_SHLIB_SUBDIR=
+fi
+
# Record target_configdirs and the configure arguments for target and
# build configuration in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
# Miscellanea: directories, flags, etc.
AC_SUBST(RPATH_ENVVAR)
+AC_SUBST(GCC_SHLIB_SUBDIR)
AC_SUBST(tooldir)
AC_SUBST(build_tooldir)
AC_SUBST(CONFIGURE_GDB_TK)