-# SPDX-License-Identifier: MIT
-#
-# Copyright (C) 2019 Michael Jeanson <mjeanson@efficios.com>
-#
+dnl SPDX-License-Identifier: MIT
+dnl
+dnl SPDX-FileCopyrightText: 2021 EfficiOS, Inc.
+dnl
+dnl Process this file with autoconf to produce a configure script.
-AC_PREREQ(2.59)
-AC_INIT([librseq],[0.1.0-pre],[mathieu dot desnoyers at efficios dot com], [], [https://github.com/compudj/librseq/])
+# Project version information
+m4_define([rseq_version_major], [0])
+m4_define([rseq_version_minor], [1])
+m4_define([rseq_version_patch], [0])
+m4_define([rseq_version_dev_stage], [-pre])
+m4_define([rseq_version], rseq_version_major[.]rseq_version_minor[.]rseq_version_patch[]rseq_version_dev_stage)
+# Library version information of "librseq"
# Following the numbering scheme proposed by libtool for the library version
# http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html
-AC_SUBST([RSEQ_LIBRARY_VERSION], [0:0:0])
+m4_define([rseq_lib_version_current], [0])
+m4_define([rseq_lib_version_revision], [0])
+m4_define([rseq_lib_version_age], [0])
+m4_define([rseq_lib_version], rseq_lib_version_current[:]rseq_lib_version_revision[:]rseq_lib_version_age)
+
+
+## ##
+## Autoconf base setup ##
+## ##
+
+AC_PREREQ([2.69])
+AC_INIT([librseq],[rseq_version],[mathieu dot desnoyers at efficios dot com],[],[https://github.com/compudj/librseq/])
AC_CONFIG_HEADERS([include/config.h])
AC_CONFIG_AUX_DIR([config])
AC_CANONICAL_TARGET
AC_CANONICAL_HOST
-AM_INIT_AUTOMAKE([foreign dist-bzip2 no-dist-gzip nostdinc])
+
+## ##
+## Automake base setup ##
+## ##
+
+AM_INIT_AUTOMAKE([1.12 foreign dist-bzip2 no-dist-gzip nostdinc -Wall -Werror])
AM_MAINTAINER_MODE([enable])
-# Enable silent rules if available (Introduced in AM 1.11)
-m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
+# Enable silent rules by default
+AM_SILENT_RULES([yes])
-# Checks for C compiler
-AC_USE_SYSTEM_EXTENSIONS
+
+## ##
+## C compiler checks ##
+## ##
+
+# Choose the C compiler
AC_PROG_CC
-AC_PROG_CC_STDC
-AC_PROG_CXX
+# AC_PROG_CC_STDC was merged in AC_PROG_CC in autoconf 2.70
+m4_version_prereq([2.70], [], [AC_PROG_CC_STDC])
-# Checks for programs.
-AC_PROG_AWK
-AC_PROG_MAKE_SET
+# Make sure the C compiler supports C99
+AS_IF([test "$ac_cv_prog_cc_c99" = "no"], [AC_MSG_ERROR([The compiler does not support C99])])
-LT_INIT
+# Enable available system extensions and LFS support
+AC_USE_SYSTEM_EXTENSIONS
+AC_SYS_LARGEFILE
+
+# Make sure the C compiler supports __attribute__
+AX_C___ATTRIBUTE__
+AS_IF([test "x$ax_cv___attribute__" != "xyes"],
+ [AC_MSG_ERROR([The compiler does not support __attribute__ extensions])])
+
+# Make sure we have pthread support
+AX_PTHREAD([], [AC_MSG_ERROR([Could not configure pthread support])])
# Checks for typedefs, structures, and compiler characteristics.
AC_C_INLINE
+AC_C_TYPEOF
AC_TYPE_INT32_T
AC_TYPE_INT64_T
AC_TYPE_OFF_T
AC_TYPE_UINT32_T
AC_TYPE_UINT64_T
-AX_C___ATTRIBUTE__
-AS_IF([test "x$ax_cv___attribute__" = "xyes"],
- [:],
- [AC_MSG_ERROR([The compiler does not support __attribute__ extensions])])
+# Detect warning flags supported by the C compiler and append them to
+# WARN_CFLAGS.
+m4_define([WARN_FLAGS_LIST], [ dnl
+ -Wall dnl
+ -Wextra dnl
+ -Wmissing-prototypes dnl
+ -Wmissing-declarations dnl
+ -Wnull-dereference dnl
+ -Wundef dnl
+ -Wshadow dnl
+ -Wjump-misses-init dnl
+ -Wsuggest-attribute=format dnl
+ -Wtautological-constant-out-of-range-compare dnl
+ -Wnested-externs dnl
+ -Wwrite-strings dnl
+ -Wformat=2 dnl
+ -Wstrict-aliasing dnl
+ -Wmissing-noreturn dnl
+ -Winit-self dnl
+ -Wduplicated-cond dnl
+ -Wduplicated-branches dnl
+ -Wlogical-op dnl
+ -Wredundant-decls dnl
+])
+
+# Pass -Werror as an extra flag during the test: this is needed to make the
+# -Wunknown-warning-option diagnostic fatal with clang.
+AC_LANG_PUSH([C])
+AX_APPEND_COMPILE_FLAGS([WARN_FLAGS_LIST], [WARN_CFLAGS], [-Werror])
+AC_LANG_POP([C])
+
+AC_LANG_PUSH([C++])
+AX_APPEND_COMPILE_FLAGS([WARN_FLAGS_LIST], [WARN_CXXFLAGS], [-Werror])
+AC_LANG_POP([C++])
+
+AE_IF_FEATURE_ENABLED([Werror], [WARN_CFLAGS="${WARN_CFLAGS} -Werror"])
+AE_IF_FEATURE_ENABLED([Werror], [WARN_CXXFLAGS="${WARN_CXXFLAGS} -Werror"])
+
+
+## ##
+## C++ compiler checks ##
+## ##
+
+# Require a C++11 compiler without GNU extensions (-std=c++11)
+AX_CXX_COMPILE_STDCXX([11], [noext], [mandatory])
+
+
+## ##
+## Header checks ##
+## ##
+
+AC_HEADER_STDBOOL
+AC_CHECK_HEADERS([ \
+ limits.h \
+ stddef.h \
+ sys/time.h \
+])
-AX_PTHREAD(,[AC_MSG_ERROR([Could not configure pthreads support])])
-AM_CFLAGS="$AM_CFLAGS $PTHREAD_CFLAGS"
+## ##
+## Programs checks ##
+## ##
+
+AM_PROG_AR
+AC_PROG_AWK
+AC_PROG_MAKE_SET
+
+# Initialize and configure libtool
+LT_INIT
+
+
+## ##
+## Library checks ##
+## ##
# Checks for library functions.
AC_FUNC_MMAP
AC_FUNC_FORK
AC_CHECK_FUNCS([ \
+ atexit \
memset \
strerror \
])
# AC_FUNC_MALLOC causes problems when cross-compiling.
#AC_FUNC_MALLOC
-# Check for headers
-AC_HEADER_STDBOOL
-AC_CHECK_HEADERS([ \
- limits.h \
- stddef.h \
+# Check dor dlopen() in -ldl or -lc
+AC_CHECK_LIB([dl], [dlopen], [
+ libdl_name=dl
+ DL_LIBS="-ldl"
+], [
+ # dlopen not found in libdl, check in libc
+ AC_CHECK_LIB([c], [dlopen], [
+ libdl_name=c
+ DL_LIBS="-lc"
+ ], [
+ AC_MSG_ERROR([Cannot find dlopen in libdl nor libc. Use [LDFLAGS]=-Ldir to specify their location.])
+ ])
])
+AC_SUBST(DL_LIBS)
-AC_CHECK_HEADER([linux/rseq.h])
-AS_IF([test "x${ac_cv_header_linux_rseq_h}" != "xyes"], [
- AC_MSG_ERROR([Cannot find 'linux/rseq.h'.])
-])
+PKG_CHECK_MODULES([SECCOMP], [libseccomp],
+ [
+ dnl PKG_CHECK_MODULES defines SECCOMP_LIBS
+ have_seccomp=yes
+ ],
+ [
+ have_seccomp=no
+ ])
+
+
+## ##
+## Optional features selection ##
+## ##
+
+# When given, add -Werror to WARN_CFLAGS and WARN_CXXFLAGS.
+# Disabled by default
+AE_FEATURE_DEFAULT_DISABLE
+AE_FEATURE([Werror], [Treat compiler warnings as errors.])
+
+
+## ##
+## Set automake variables for optional feature conditionnals in Makefile.am ##
+## ##
+
+AM_CONDITIONAL([ENABLE_SHARED], [test "x${enable_shared}" = "xyes"])
+AM_CONDITIONAL([ENABLE_SECCOMP], [test "x${have_seccomp}" = "xyes"])
-AM_CPPFLAGS="-include config.h"
+
+## ##
+## Substitute variables for use in Makefile.am ##
+## ##
+
+# Library versions for libtool
+AC_SUBST([RSEQ_LIBRARY_VERSION], [rseq_lib_version])
+
+# The order in which the include folders are searched is important.
+# The top_builddir should always be searched first in the event that a build
+# time generated file is included.
+AM_CPPFLAGS="-I\$(top_builddir)/include -I\$(top_srcdir)/include -include config.h"
AC_SUBST(AM_CPPFLAGS)
-AM_CFLAGS="-Wall -Wextra $AM_CFLAGS"
+AM_CFLAGS="$WARN_CFLAGS $PTHREAD_CFLAGS"
AC_SUBST(AM_CFLAGS)
+AM_CXXFLAGS="$WARN_CXXFLAGS $PTHREAD_CFLAGS"
+AC_SUBST(AM_CXXFLAGS)
+
+
+## ##
+## Output files generated by configure ##
+## ##
+
AC_CONFIG_FILES([
Makefile
doc/Makefile
src/librseq.pc
tests/Makefile
tests/utils/Makefile
+ tests/unit/Makefile
])
AC_OUTPUT
+
#
# Mini-report on what will be built.
#