AC_ARG_PROGRAM
m4_pattern_allow([^AS_FOR_TARGET$])dnl
+m4_pattern_allow([^AS_FOR_BUILD$])dnl
# Get 'install' or 'install-sh' and its variants.
AC_PROG_INSTALL
target-libiberty \
target-libgloss \
target-newlib \
+ target-libgomp \
target-libstdc++-v3 \
target-libmudflap \
target-libssp \
target-boehm-gc \
${libgcj} \
target-libobjc \
- target-libada \
- target-libgomp"
+ target-libada"
# these tools are built using the target libraries, and are intended to
# run only in the target environment
*-*-chorusos)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- powerpc-*-darwin* | i[[3456789]]86-*-darwin*)
+ powerpc-*-darwin* | i[[3456789]]86-*-darwin* | x86_64-*-darwin9*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
m68k-apollo-*)
noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
;;
+ mips*-sde-elf*)
+ skipdirs="$skipdirs target-libiberty"
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ if test x$with_newlib = xyes; then
+ noconfigdirs="$noconfigdirs gprof"
+ fi
+ libgloss_dir=mips
+ ;;
mips*-*-irix5*)
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
fi
if test "${build}" != "${host}" ; then
+ AR_FOR_BUILD=${AR_FOR_BUILD-ar}
+ AS_FOR_BUILD=${AS_FOR_BUILD-as}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
+ CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
+ GCJ_FOR_BUILD=${GCJ_FOR_BUILD-gcj}
+ GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
+ DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
+ LD_FOR_BUILD=${LD_FOR_BUILD-ld}
+ NM_FOR_BUILD=${NM_FOR_BUILD-nm}
+ RANLIB_FOR_BUILD=${RANLIB_FOR_BUILD-ranlib}
+ WINDRES_FOR_BUILD=${WINDRES_FOR_BUILD-windres}
+ WINDMC_FOR_BUILD=${WINDMC_FOR_BUILD-windmc}
else
+ AR_FOR_BUILD="\$(AR)"
+ AS_FOR_BUILD="\$(AS)"
CC_FOR_BUILD="\$(CC)"
+ CXX_FOR_BUILD="\$(CXX)"
+ GCJ_FOR_BUILD="\$(GCJ)"
+ GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
+ DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
+ LD_FOR_BUILD="\$(LD)"
+ NM_FOR_BUILD="\$(NM)"
+ RANLIB_FOR_BUILD="\$(RANLIB)"
+ WINDRES_FOR_BUILD="\$(WINDRES)"
+ WINDMC_FOR_BUILD="\$(WINDMC)"
fi
AC_PROG_CC
if test x"$have_gmp" = xyes; then
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
- dnl MPFR 2.2.0 is acceptable but buggy, MPFR 2.2.1 is better.
+ dnl MPFR 2.2.1 is acceptable, but MPFR 2.3.0 is better.
AC_MSG_CHECKING([for correct version of mpfr.h])
AC_TRY_LINK([#include <gmp.h>
#include <mpfr.h>],[
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,2,0)
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,2,1)
choke me
#endif
mpfr_t n;
mpfr_subnormalize (x, t, GMP_RNDN);
], [AC_TRY_LINK([#include <gmp.h>
#include <mpfr.h>],[
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,2,1)
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,0)
choke me
#endif
mpfr_t n; mpfr_init(n);
CFLAGS="$saved_CFLAGS"
if test x$have_gmp != xyes; then
- AC_MSG_ERROR([Building GCC requires GMP 4.1+ and MPFR 2.2.1+.
+ AC_MSG_ERROR([Building GCC requires GMP 4.1+ and MPFR 2.3.0+.
Try the --with-gmp and/or --with-mpfr options to specify their locations.
Copies of these libraries' source code can be found at their respective
hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
mips*-sde-elf*)
target_makefile_frag="config/mt-sde"
;;
+ mipsisa*-*-elfoabi*)
+ target_makefile_frag="config/mt-mips-elfoabi"
+ ;;
*-*-netware*)
target_makefile_frag="config/mt-netware"
;;
# Allow the user to override the flags for
# our build compiler if desired.
-CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
+if test x"${build}" = x"${host}" ; then
+ CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
+ CXXFLAGS_FOR_BUILD=${CXXFLAGS_FOR_BUILD-${CXXFLAGS}}
+ LDFLAGS_FOR_BUILD=${LDFLAGS_FOR_BUILD-${LDFLAGS}}
+fi
# On Canadian crosses, we'll be searching the right directories for
# the previously-installed cross compiler, so don't bother to add
# Build tools.
+AC_SUBST(AR_FOR_BUILD)
+AC_SUBST(AS_FOR_BUILD)
AC_SUBST(CC_FOR_BUILD)
+AC_SUBST(CFLAGS_FOR_BUILD)
+AC_SUBST(CXXFLAGS_FOR_BUILD)
+AC_SUBST(CXX_FOR_BUILD)
+AC_SUBST(DLLTOOL_FOR_BUILD)
+AC_SUBST(GCJ_FOR_BUILD)
+AC_SUBST(GFORTRAN_FOR_BUILD)
+AC_SUBST(LDFLAGS_FOR_BUILD)
+AC_SUBST(LD_FOR_BUILD)
+AC_SUBST(NM_FOR_BUILD)
+AC_SUBST(RANLIB_FOR_BUILD)
+AC_SUBST(WINDMC_FOR_BUILD)
+AC_SUBST(WINDRES_FOR_BUILD)
AC_SUBST(config_shell)
# Generate default definitions for YACC, M4, LEX and other programs that run
*" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
*)
changequote(,)
- # For an installed makeinfo, we require it to be from texinfo 4.4 or
+ # For an installed makeinfo, we require it to be from texinfo 4.6 or
# higher, else we use the "missing" dummy.
if ${MAKEINFO} --version \
- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[4-9]|[5-9])' >/dev/null 2>&1; then
+ | egrep 'texinfo[^0-9]*(4\.([6-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
:
else
MAKEINFO="$MISSING makeinfo"
AC_SUBST(CC)
AC_SUBST(CXX)
AC_SUBST(CFLAGS)
-AC_SUBST(CFLAGS_FOR_BUILD)
AC_SUBST(CXXFLAGS)
# Target tools.