# these libraries are used by various programs built for the host environment
#
-host_libs="mmalloc libiberty opcodes bfd readline glob tcl tk"
+host_libs="mmalloc libiberty opcodes bfd readline glob tcl tk tclX"
# these tools are built for the host environment
#
host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
- send_pr gprof gdbtest tgas etc expect deja-gnu z8ksim
+ prms send-pr gprof gdbtest tgas etc expect dejagnu sim
m4 autoconf ispell grep diff rcs cvs fileutils shellutils
- textutils wdiff find emacs"
+ textutils wdiff find emacs uudecode hello tar gzip indent
+ recode release"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
#
-target_libs="libm xiberty newlib chillrt libg++"
+target_libs="libm xiberty newlib libg++"
+
+## start-sanitize-chill
+target_libs="${target_libs} chill chillrt"
+## end-sanitize-chill
# these tools are built using the target libs, and are intended to run only
# in the target environment. we currently have none.
# directories to be built in the native environment only
#
-native_only="autoconf cvs diff emacs fileutils find grep groff ispell m4
- rcs sed shellutils textutils wdiff"
+native_only="autoconf cvs emacs fileutils find grep groff gzip hello indent
+ ispell m4 rcs recode sed shellutils tar textutils tk uudecode wdiff
+ gprof"
# directories to be built in a cross environment only
#
case "${host}" in
m68k-apollo-sysv*) host_makefile_frag=config/mh-apollo68 ;;
m68k-apollo-bsd*) host_makefile_frag=config/mh-a68bsd ;;
- m88k-motorola-m88kbcs) host_makefile_frag=config/mh-delta88;;
+ m88k-motorola-sysv*) host_makefile_frag=config/mh-delta88;;
m88k-dg-dgux*) host_makefile_frag=config/mh-dgux ;;
mips-dec-ultrix*) host_makefile_frag=config/mh-decstation ;;
- mips-sgi-irix4) host_makefile_frag=config/mh-irix4 ;;
- mips-sgi-irix3) host_makefile_frag=config/mh-sysv ;;
+ mips-sgi-irix4*) host_makefile_frag=config/mh-irix4 ;;
+ mips-sgi-irix3*) host_makefile_frag=config/mh-sysv ;;
i[34]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
i[34]86-*-sco*) host_makefile_frag=config/mh-sco ;;
i[34]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
i[34]86-*-linux) host_makefile_frag=config/mh-linux ;;
i[34]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
+ i[34]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
+ vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
*-ibm-aix*) host_makefile_frag=config/mh-aix ;;
- *-sun-solaris*) host_makefile_frag=config/mh-solaris ;;
+ *-bull-bosx*) host_makefile_frag=config/mh-aix ;;
+ *-sun-solaris2*) host_makefile_frag=config/mh-solaris ;;
+ m68k-sun-*) host_makefile_frag=config/mh-sun3 ;;
*-sun-*) host_makefile_frag=config/mh-sun ;;
*-hp-hpux) host_makefile_frag=config/mh-hpux ;;
- *-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
- *-*-sysv*) host_makefile_frag=config/mh-sysv ;;
+ *-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
+ *-*-sysv*) host_makefile_frag=config/mh-sysv ;;
esac
# per-target:
-bfd_target=
-
-case "${target}" in
- a29k-amd-ebmon) bfd_target="ebmon29k" ;;
- a29k-amd-udi) bfd_target="udi29k" ;;
- a29k-amd-*) echo "bad target_os for amd" 1>&2
- exit 1
- ;;
+# some tools are so dependent upon X11 that if we're not building with X,
+# it's not even worth trying to configure, much less build, that tool.
+
+case ${with_x} in
+ yes | "") # the default value for this tree is that X11 is available
+ ;;
+ no)
+ configdirs=`echo ${configdirs} | sed -e 's/tk//'`
+ ;;
+ *)
+ echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
+ ;;
esac
+
# some tools are only suitable for building in a "native" situation.
# Those are added when we have a host==target configuration. For cross
# toolchains, we add some directories that should only be useful in a
# target this usually means that a port of the program doesn't
# exist yet.
-#case "${host}" in
-# hppa*-*-*)
-# configdirs=`echo ${configdirs} | sed -e 's/emacs//'`
-# ;;
-#esac
+case "${host}" in
+ alpha-dec-osf1)
+ configdirs=`echo ${configdirs} | sed -e 's/gdb//'`
+ ;;
+ i[34]86-*-go32)
+ configdirs=`echo ${configdirs} | sed -e 's/tcl//;s/expect//;s/deja-gnu//'`
+ configdirs=`echo ${configdirs} | sed -e 's/make//;s/texinfo//;s/bison//'`
+ configdirs=`echo ${configdirs} | sed -e 's/patch//;s/flex//;s/byacc//'`
+ configdirs=`echo ${configdirs} | sed -e 's/send-pr//;s/gprof//'`
+ configdirs=`echo ${configdirs} | sed -e 's/uudecode//;s/dejagnu//'`
+ configdirs=`echo ${configdirs} | sed -e 's/diff//'`
+ ;;
+esac
case "${target}" in
- mips-*-*)
+ alpha-dec-osf1)
configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas//'`
+ configdirs=`echo ${configdirs} | sed -e 's/gdb//;s/emacs//;s/fileutils//'`
+ configdirs=`echo ${configdirs} | sed -e 's/grep//;s/libg++//'`
+ ;;
+ h8300-*-*)
+ configdirs=`echo ${configdirs} | sed -e 's/libg++//'`
+## start-sanitize-chill
+ configdirs=`echo ${configdirs} | sed -e 's/chillrt//'`
+## end-sanitize-chill
;;
- rs6000-*-*)
- configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas//;s/tk//'`
+ h8500-*-*)
+ configdirs=`echo ${configdirs} | sed -e 's/libg++//'`
+## start-sanitize-chill
+ configdirs=`echo ${configdirs} | sed -e 's/chillrt//'`
+## end-sanitize-chill
+ ;;
+ hppa*-*-osf)
+# Do configure ld/binutils/gas for this case.
;;
hppa*-*-*)
configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas//'`
;;
- *-*-solaris2)
+ rs6000-*-*)
+ configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas//;s/gprof//'`
+ ;;
+ mips-*-*)
+ configdirs=`echo ${configdirs} | sed -e 's/gprof//'`
+ ;;
+ i[34]86-*-sco*)
+ configdirs=`echo ${configdirs} | sed -e 's/gprof//'`
+ ;;
+ *-*-solaris2*)
configdirs=`echo ${configdirs} | sed -e 's/ld//;s/gas//'`
;;
+ *-*-sysv4*)
+ configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas//'`
+ ;;
+ *-*-vms)
+ configdirs=`echo ${configdirs} | sed -e 's/bfd//;s/ld//;s/binutils//'`
+ ;;
esac
-
-target_makefile_frag=config/mt-${bfd_target}
+# Set with_gnu_as and with_gnu_ld as appropriate.
+# This is commented out for now.
+#if [ x${with_gnu_as} != xyes ] && echo ${configdirs} | grep gas > /dev/null && [ -d ${srcdir}/gas ]; then
+# with_gnu_as=yes
+# withoptions="$withoptions -with-gnu-as"
+#fi
+#if [ x${with_gnu_ld} != xyes ] && echo ${configdirs} | grep ld > /dev/null && [ -d ${srcdir}/ld ]; then
+# with_gnu_ld=yes
+# withoptions="$withoptions -with-gnu-ld"
+#fi
#
# Local Variables:
# fill-column: 131
# End:
#
-