-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-# 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
i[[3456789]]86-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
+ i[[3456789]]86-*-rdos*)
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+ ;;
m32r-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
mn10300-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- ms1-*-*)
+ mt-*-*)
noconfigdirs="$noconfigdirs sim"
;;
powerpc-*-aix*)
powerpc-*-darwin*)
host_makefile_frag="config/mh-ppc-darwin"
;;
+ powerpc-*-aix*)
+ host_makefile_frag="config/mh-ppc-aix"
+ ;;
+ rs6000-*-aix*)
+ host_makefile_frag="config/mh-ppc-aix"
+ ;;
*-*-lynxos*)
# /bin/cc is less than useful for our purposes. Always use GCC
tentative_cc="/bin/gcc"
fi
fi
+# Set with_gnu_as and with_gnu_ld as appropriate.
+#
+# This is done by determining whether or not the appropriate directory
+# is available, and by checking whether or not specific configurations
+# have requested that this magic not happen.
+#
+# The command line options always override the explicit settings in
+# configure.in, and the settings in configure.in override this magic.
+#
+# If the default for a toolchain is to use GNU as and ld, and you don't
+# want to do that, then you should use the --without-gnu-as and
+# --without-gnu-ld options for the configure script.
+
+if test x${use_gnu_as} = x &&
+ echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
+ with_gnu_as=yes
+ extra_host_args="$extra_host_args --with-gnu-as"
+fi
+
+if test x${use_gnu_ld} = x &&
+ echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
+ with_gnu_ld=yes
+ extra_host_args="$extra_host_args --with-gnu-ld"
+fi
+
+# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
+# can detect this case.
+
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
+ with_newlib=yes
+ extra_host_args="$extra_host_args --with-newlib"
+fi
+
# Handle ${copy_dirs}
set fnord ${copy_dirs}
shift
shift; shift
done
+# Determine a target-dependent exec_prefix that the installed
+# gcc will search in. Keep this list sorted by triplet, with
+# the *-*-osname triplets last.
+md_exec_prefix=
+case "${target}" in
+ alpha*-*-*vms*)
+ md_exec_prefix=/gnu/lib/gcc-lib
+ ;;
+ i[34567]86-pc-msdosdjgpp*)
+ md_exec_prefix=/dev/env/DJDIR/bin
+ ;;
+ i[34567]86-*-sco3.2v5*)
+ if test $with_gnu_as = yes; then
+ md_exec_prefix=/usr/gnu/bin
+ else
+ md_exec_prefix=/usr/ccs/bin/elf
+ fi
+ ;;
+
+ mn10300-*-* | \
+ powerpc-*-chorusos* | \
+ powerpc*-*-eabi* | \
+ powerpc*-*-sysv* | \
+ powerpc*-*-kaos* | \
+ s390x-ibm-tpf*)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+ sparc64-*-elf*)
+ ;;
+ v850*-*-*)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+ xtensa-*-elf*)
+ ;;
+
+ *-*-beos* | \
+ *-*-elf* | \
+ *-*-hpux* | \
+ *-*-netware* | \
+ *-*-nto-qnx* | \
+ *-*-rtems* | \
+ *-*-solaris2* | \
+ *-*-sysv[45]* | \
+ *-*-vxworks* | \
+ *-wrs-windiss)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+esac
+
extra_arflags_for_target=
extra_nmflags_for_target=
extra_ranlibflags_for_target=
;;
esac
-# Set with_gnu_as and with_gnu_ld as appropriate.
-#
-# This is done by determining whether or not the appropriate directory
-# is available, and by checking whether or not specific configurations
-# have requested that this magic not happen.
-#
-# The command line options always override the explicit settings in
-# configure.in, and the settings in configure.in override this magic.
-#
-# If the default for a toolchain is to use GNU as and ld, and you don't
-# want to do that, then you should use the --without-gnu-as and
-# --without-gnu-ld options for the configure script.
-
-if test x${use_gnu_as} = x &&
- echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
- with_gnu_as=yes
- extra_host_args="$extra_host_args --with-gnu-as"
-fi
-
-if test x${use_gnu_ld} = x &&
- echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
- with_gnu_ld=yes
- extra_host_args="$extra_host_args --with-gnu-ld"
-fi
-
-# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
-# can detect this case.
-
-if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
- with_newlib=yes
- extra_host_args="$extra_host_args --with-newlib"
-fi
-
# Default to using --with-stabs for certain targets.
if test x${with_stabs} = x ; then
case "${target}" in
# not to nest @if/@endif pairs, because configure will not warn you at all.
AC_ARG_ENABLE([bootstrap],
-[ --enable-bootstrap[=lean] Enable bootstrapping [no]],,
+[ --enable-bootstrap Enable bootstrapping [yes if native build]],,
enable_bootstrap=default)
# Issue errors and warnings for invalid/strange bootstrap combinations.
case "$have_compiler:$host:$target:$enable_bootstrap" in
*:*:*:no) ;;
- # Default behavior. (We'll) enable bootstrap if we have a compiler
+ # Default behavior. Enable bootstrap if we have a compiler
# and we are in a native configuration.
yes:$build:$build:default)
- # This will become 'yes'
- enable_bootstrap=no ;;
+ enable_bootstrap=yes ;;
*:*:*:default)
enable_bootstrap=no ;;
# We have a compiler and we are in a native configuration, bootstrap is ok
- yes:$build:$build:yes | yes:$build:$build:lean)
+ yes:$build:$build:yes)
;;
# Other configurations, but we have a compiler. Assume the user knows
# what he's doing.
- yes:*:*:yes | yes:*:*:lean)
+ yes:*:*:yes)
AC_MSG_WARN([trying to bootstrap a cross compiler])
;;
# No compiler: if they passed --enable-bootstrap explicitly, fail
- no:*:*:yes | no:*:*:lean)
+ no:*:*:yes)
AC_MSG_ERROR([cannot bootstrap without a compiler]) ;;
# Fail if wrong command line
# Adjust the toplevel makefile according to whether bootstrap was selected.
case "$enable_bootstrap" in
yes)
- bootstrap_lean='#'
- bootstrap_suffix=bootstrap ;;
- lean)
- bootstrap_lean=''
bootstrap_suffix=bootstrap ;;
no)
bootstrap_suffix=no-bootstrap ;;
esac
-AC_SUBST(bootstrap_lean)
for module in ${build_configdirs} ; do
if test -z "${no_recursion}" \
/^@endif build-$module-$bootstrap_suffix\$/d"
done
for module in ${configdirs} ; do
- if test -z "${no_recursion}" \
- && test -f ${module}/Makefile; then
- echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
- rm -f ${module}/Makefile
+ if test -z "${no_recursion}"; then
+ for file in stage*-${module}/Makefile ${module}/Makefile; do
+ if test -f ${file}; then
+ echo 1>&2 "*** removing ${file} to force reconfigure"
+ rm -f ${file}
+ fi
+ done
fi
extrasub="$extrasub
/^@if $module\$/d
AC_SUBST(CXXFLAGS)
# Target tools.
-NCN_STRICT_CHECK_TARGET_TOOLS(AR_FOR_TARGET, ar)
-NCN_STRICT_CHECK_TARGET_TOOLS(AS_FOR_TARGET, as)
+AC_ARG_WITH([build-time-tools],
+ [ --with-build-time-tools=path
+ use given path to find target tools during the build],
+ [case x"$withval" in
+ x/*) ;;
+ *)
+ with_build_time_tools=
+ AC_MSG_WARN([argument to --with-build-time-tools must be an absolute path])
+ ;;
+ esac],
+ [with_build_time_tools=])
+
NCN_STRICT_CHECK_TARGET_TOOLS(CC_FOR_TARGET, cc gcc)
NCN_STRICT_CHECK_TARGET_TOOLS(CXX_FOR_TARGET, c++ g++ cxx gxx)
-NCN_STRICT_CHECK_TARGET_TOOLS(DLLTOOL_FOR_TARGET, dlltool)
NCN_STRICT_CHECK_TARGET_TOOLS(GCC_FOR_TARGET, gcc, ${CC_FOR_TARGET})
NCN_STRICT_CHECK_TARGET_TOOLS(GCJ_FOR_TARGET, gcj)
NCN_STRICT_CHECK_TARGET_TOOLS(GFORTRAN_FOR_TARGET, gfortran)
-NCN_STRICT_CHECK_TARGET_TOOLS(LD_FOR_TARGET, ld)
-NCN_STRICT_CHECK_TARGET_TOOLS(LIPO_FOR_TARGET, lipo)
-NCN_STRICT_CHECK_TARGET_TOOLS(NM_FOR_TARGET, nm)
-NCN_STRICT_CHECK_TARGET_TOOLS(OBJDUMP_FOR_TARGET, objdump)
-NCN_STRICT_CHECK_TARGET_TOOLS(RANLIB_FOR_TARGET, ranlib, :)
-NCN_STRICT_CHECK_TARGET_TOOLS(STRIP_FOR_TARGET, strip)
-NCN_STRICT_CHECK_TARGET_TOOLS(WINDRES_FOR_TARGET, windres)
+
+ACX_CHECK_INSTALLED_TARGET_TOOL(AR_FOR_TARGET, ar)
+ACX_CHECK_INSTALLED_TARGET_TOOL(AS_FOR_TARGET, as)
+ACX_CHECK_INSTALLED_TARGET_TOOL(DLLTOOL_FOR_TARGET, dlltool)
+ACX_CHECK_INSTALLED_TARGET_TOOL(LD_FOR_TARGET, ld)
+ACX_CHECK_INSTALLED_TARGET_TOOL(LIPO_FOR_TARGET, lipo)
+ACX_CHECK_INSTALLED_TARGET_TOOL(NM_FOR_TARGET, nm)
+ACX_CHECK_INSTALLED_TARGET_TOOL(OBJDUMP_FOR_TARGET, objdump)
+ACX_CHECK_INSTALLED_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib, :)
+ACX_CHECK_INSTALLED_TARGET_TOOL(STRIP_FOR_TARGET, strip)
+ACX_CHECK_INSTALLED_TARGET_TOOL(WINDRES_FOR_TARGET, windres)
RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
esac
AC_SUBST(stage1_cflags)
-# It makes debugging easier if we create as symlinks the stage directories
-# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
-# possible, however, we can resort to mv.
-AC_CACHE_CHECK([if symbolic links between directories work],
-[gcc_cv_prog_ln_s_dir],
-[if test "${LN_S}" = "ln -s" \
- && mkdir confdir.s1 \
- && ln -s confdir.s1 confdir.s2 \
- && echo timestamp1 > confdir.s1/conftest.1 \
- && cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \
- && echo timestamp2 > confdir.s2/conftest.2 \
- && cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \
- && rm -f confdir.s2; then
- gcc_cv_prog_ln_s_dir=yes
-else
- gcc_cv_prog_ln_s_dir=no
-fi
-rm -rf confdir.s1 confdir.s2])
-
-case ${gcc_cv_prog_ln_s_dir} in
- yes)
- CREATE_LINK_TO_DIR='ln -s $$1 $$2'
- UNDO_LINK_TO_DIR='rm -f $$1' ;;
- *)
- CREATE_LINK_TO_DIR='mv $$1 $$2'
- UNDO_LINK_TO_DIR='mv $$1 $$2' ;;
-esac
-AC_SUBST(CREATE_LINK_TO_DIR)
-AC_SUBST(UNDO_LINK_TO_DIR)
-
# Enable -Werror in bootstrap stage2 and later.
# Change the default to "no" on release branches.
AC_ARG_ENABLE(werror,