* remote.c, remote-mips.c: Use sr_get_debug not remote_debug.

[deliverable/binutils-gdb.git] / configure.in

diff --git a/configure.in b/configure.in
index a4aebf585dbc3b252eb5a25cd8f7a3253b36c8eb..270a754460bce8470abba4f9aad959ff8d9c6852 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -24,13 +24,13 @@
 
 # these libraries are used by various programs built for the host environment
 #
-host_libs="mmalloc libiberty opcodes bfd readline glob tcl tk tclX"
+host_libs="mmalloc libiberty opcodes bfd readline glob gash tcl tk tclX"
 
 # these tools are built for the host environment
 #
 host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
            prms send-pr gprof gdbtest tgas etc expect dejagnu sim
-            m4 autoconf ispell grep diff rcs cvs fileutils shellutils
+            m4 autoconf ispell grep diff rcs cvs dosutils fileutils shellutils
            textutils wdiff find emacs uudecode hello tar gzip indent
            recode release"
 
@@ -38,7 +38,7 @@ host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
 # these libraries are built for the target environment, and are built after
 # the host libraries and the host tools (which may be a cross compiler)
 #
-target_libs="libm xiberty newlib libg++"
+target_libs="libm xiberty newlib libio libg++"
 
 ## start-sanitize-chill
 target_libs="${target_libs} chill chillrt"
@@ -64,7 +64,7 @@ target_tools="groff"
 # directories to be built in the native environment only
 #
 native_only="autoconf cvs emacs fileutils find grep groff gzip hello indent
-             ispell m4 rcs recode sed shellutils tar textutils tk uudecode wdiff
+             ispell m4 rcs recode sed shellutils tar textutils gash tk uudecode wdiff 
             gprof"
 
 # directories to be built in a cross environment only
@@ -83,6 +83,8 @@ srcname="gnu development package"
 # per-host:
 
 case "${host}" in
+  alpha-dec-osf*)         host_makefile_frag=config/mh-alphaosf ;;
+  m68k-hp-hpux)                  host_makefile_frag=config/mh-hp300 ;;
   m68k-apollo-sysv*)      host_makefile_frag=config/mh-apollo68 ;;
   m68k-apollo-bsd*)       host_makefile_frag=config/mh-a68bsd ;;
   m88k-motorola-sysv*)    host_makefile_frag=config/mh-delta88;;
@@ -90,6 +92,7 @@ case "${host}" in
   mips-dec-ultrix*)       host_makefile_frag=config/mh-decstation ;;
   mips-sgi-irix4*)        host_makefile_frag=config/mh-irix4 ;;
   mips-sgi-irix3*)        host_makefile_frag=config/mh-sysv ;;
+  mips-*-sysv*)                  host_makefile_frag=config/mh-riscos ;;
   i[34]86-ncr-sysv4*)     host_makefile_frag=config/mh-ncr3000 ;;
   i[34]86-*-sco*)         host_makefile_frag=config/mh-sco ;;
   i[34]86-*-isc*)        host_makefile_frag=config/mh-sysv ;;
@@ -99,16 +102,21 @@ case "${host}" in
   vax-*-ultrix2*)         host_makefile_frag=config/mh-vaxult2 ;;
   *-ibm-aix*)             host_makefile_frag=config/mh-aix ;;
   *-bull-bosx*)           host_makefile_frag=config/mh-aix ;;
-  *-sun-solaris2*)        host_makefile_frag=config/mh-solaris ;;
+  *-*-solaris2*)          host_makefile_frag=config/mh-solaris ;;
   m68k-sun-*)            host_makefile_frag=config/mh-sun3 ;;
   *-sun-*)               host_makefile_frag=config/mh-sun ;;
   *-hp-hpux)              host_makefile_frag=config/mh-hpux ;;
+  *-*-lynxos*)           host_makefile_frag=config/mh-lynxos ;;
   *-*-sysv4*)             host_makefile_frag=config/mh-sysv4 ;;
   *-*-sysv*)              host_makefile_frag=config/mh-sysv ;;
 esac
 
 # per-target:
 
+case "${target}" in
+  hppa*-hp-hpux)         target_makefile_frag=config/mt-hppa ;;
+esac
+
 # some tools are so dependent upon X11 that if we're not building with X, 
 # it's not even worth trying to configure, much less build, that tool.
 
@@ -116,7 +124,7 @@ case ${with_x} in
   yes | "")  # the default value for this tree is that X11 is available
        ;;
   no)
-       configdirs=`echo ${configdirs} | sed -e 's/tk//'`
+       configdirs=`echo ${configdirs} | sed -e 's/tk//;/gash//'`
        ;;
   *)
        echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
@@ -165,18 +173,18 @@ esac
 
 case "${target}" in
   alpha-dec-osf1)
-    configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas//'`
+    configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas //'`
     configdirs=`echo ${configdirs} | sed -e 's/gdb//;s/emacs//;s/fileutils//'`
-    configdirs=`echo ${configdirs} | sed -e 's/grep//;s/libg++//'`
+    configdirs=`echo ${configdirs} | sed -e 's/grep//;s/libg++//;s/libio//'`
     ;; 
-  h8300-*-*)
-    configdirs=`echo ${configdirs} | sed -e 's/libg++//'`
+  h8300*-*-*)
+    configdirs=`echo ${configdirs} | sed -e 's/libg++//;s/libio//'`
 ## start-sanitize-chill
     configdirs=`echo ${configdirs} | sed -e 's/chillrt//'`
 ## end-sanitize-chill
     ;;
   h8500-*-*)
-    configdirs=`echo ${configdirs} | sed -e 's/libg++//'`
+    configdirs=`echo ${configdirs} | sed -e 's/libg++//;s/libio//'`
 ## start-sanitize-chill
     configdirs=`echo ${configdirs} | sed -e 's/chillrt//'`
 ## end-sanitize-chill
@@ -185,26 +193,29 @@ case "${target}" in
     # Do configure ld/binutils/gas for this case.
     ;;
   hppa*-*-*)
-    configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas//'`
+    configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas /pagas /;s/shellutils//'`
     ;;
   i[34]86-*-go32)
     # add the go32 support tools to the list
     configdirs=`echo go32 ${configdirs}`
     ;;
   rs6000-*-*)
-    configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas//;s/gprof//'`
+    configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas //;s/gprof//'`
     ;;
   mips-*-*)
     configdirs=`echo ${configdirs} | sed -e 's/gprof//'`
     ;;
+  sh-*-*)
+    configdirs=`echo gprof ${configdirs}`
+    ;;
   i[34]86-*-sco*)
     configdirs=`echo ${configdirs} | sed -e 's/gprof//'`
     ;;
   *-*-solaris2*)
-    configdirs=`echo ${configdirs} | sed -e 's/ld//;s/gas//'`
+    configdirs=`echo ${configdirs} | sed -e 's/ld//;s/gas //'`
     ;;
   *-*-sysv4*)
-    configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas//'`
+    configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas //'`
     ;;
   *-*-vms)
     configdirs=`echo ${configdirs} | sed -e 's/bfd//;s/ld//;s/binutils//'`