# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline db tcl tk tcl8.1 tk8.1 tclX itcl tix libgui zlib"
+host_libs="intl mmalloc libiberty opcodes bfd readline db tcl tk tclX itcl tix libgui zlib"
libstdcxx_version="target-libstdc++-v3"
-# Don't use libstdc++-v3's flags to configure/build itself.
-libstdcxx_flags='`case $$dir in libstdc++-v3 | libjava) ;; *) test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags --build-includes;; esac` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
-host_tools="texinfo byacc flex bison binutils ld gas gcc cgen sid sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext zip fastjar"
+host_tools="texinfo byacc flex bison binutils ld gas gcc sid sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext zip fastjar"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
target_libs="target-libiberty \
target-libgloss \
target-newlib \
- target-librx \
${libstdcxx_version} \
target-libf2c \
${libgcj}
# per-host:
+# There is no longer anything interesting in the per-host section.
+
+# per-target:
+
+# Define is_cross_compiler to save on calls to 'test'.
+is_cross_compiler=
+if test x"${host}" = x"${target}" ; then
+ is_cross_compiler=no
+else
+ is_cross_compiler=yes
+fi
+
# Work in distributions that contain no compiler tools, like Autoconf.
tentative_cc=""
if test -d ${srcdir}/config ; then
host_makefile_frag=mh-frag
fi
-# per-target:
-
case "${target}" in
v810*)
target_makefile_frag="${target_makefile_frag} config/mt-v810"
esac
skipdirs=
-gasdir=gas
use_gnu_ld=
use_gnu_as=
# toolchains, we add some directories that should only be useful in a
# cross-compiler.
-is_cross_compiler=
-
-if test x"${host}" = x"${target}" ; then
- # when doing a native toolchain, don't build the targets
- # that are in the 'cross only' list
- skipdirs="${skipdirs} ${cross_only}"
- is_cross_compiler=no
-else
- # similarly, don't build the targets in the 'native only'
- # list when building a cross compiler
- skipdirs="${skipdirs} ${native_only}"
- is_cross_compiler=yes
-fi
+case $is_cross_compiler in
+ no) skipdirs="${skipdirs} ${cross_only}" ;;
+ yes) skipdirs="${skipdirs} ${native_only}" ;;
+esac
# We always want to use the same name for this directory, so that dejagnu
# can reliably find it.
done
fi
-# If both --with-headers and --with-libs are specified, default to
-# --without-newlib.
-if test x"${with_headers}" != x && test x"${with_libs}" != x ; then
- if test x"${with_newlib}" = x ; then
- with_newlib=no
- fi
-fi
-
-# Recognize --with-newlib/--without-newlib.
-if test x${with_newlib} = xno ; then
- skipdirs="${skipdirs} target-newlib"
-elif test x${with_newlib} = xyes ; then
- skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
-fi
-
-# Default to using --with-stabs for certain targets.
-if test x${with_stabs} = x ; then
- case "${target}" in
- mips*-*-irix6*)
- ;;
- mips*-*-* | alpha*-*-osf*)
- with_stabs=yes;
- withoptions="${withoptions} --with-stabs"
- ;;
- esac
-fi
-
# Handle ${copy_dirs}
set fnord ${copy_dirs}
shift
shift; shift
done
+# If both --with-headers and --with-libs are specified, default to
+# --without-newlib.
+if test x"${with_headers}" != x && test x"${with_libs}" != x ; then
+ if test x"${with_newlib}" = x ; then
+ with_newlib=no
+ fi
+fi
+
+# Recognize --with-newlib/--without-newlib.
+case ${with_newlib} in
+ no) skipdirs="${skipdirs} target-newlib" ;;
+ yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
+esac
+
+# Default to using --with-stabs for certain targets.
+if test x${with_stabs} = x ; then
+ case "${target}" in
+ mips*-*-irix6*)
+ ;;
+ mips*-*-* | alpha*-*-osf*)
+ with_stabs=yes;
+ withoptions="${withoptions} --with-stabs"
+ ;;
+ esac
+fi
+
# Configure extra directories which are host specific
case "${host}" in
esac
;;
*-*-netware)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-newlib target-libiberty target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-newlib target-libiberty target-libgloss ${libgcj}"
;;
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
alpha*-*-linux*)
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- # linux has rx in libc
- skipdirs="$skipdirs target-librx"
;;
alpha*-*-freebsd*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
sh-*-linux*)
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- # linux has rx in libc
- skipdirs="$skipdirs target-librx"
;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
noconfigdirs="$noconfigdirs ${libgcj}"
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
+ avr-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty ${libstdcxx_version} ${libgcj}"
+ ;;
c4x-*-*)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj}"
;;
c54x*-*-* | tic54x-*-*)
noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj} gcc gdb newlib"
noconfigdirs="$noconfigdirs ${libgcj}"
;;
d10v-*-*)
- noconfigdirs="$noconfigdirs target-librx ${libstdcxx_version} target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj}"
;;
d30v-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
;;
+ frv-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ if test x${is_cross_compiler} != xno ; then
+ target_configdirs="${target_configdirs} target-bsp target-cygmon"
+ fi
+ ;;
h8300*-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
h8500-*-*)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj} target-libf2c"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj} target-libf2c"
;;
hppa*64*-*-linux* | parisc*64*-*-linux*)
# In this case, it's because the hppa64-linux target is for
s390*-*-linux*)
# The libffi port is not yet in the GCC tree
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
- # linux has rx in libc
- skipdirs="$skipdirs target-librx"
;;
i[3456]86-*-linux*)
# This section makes it possible to build newlib natively on linux.
# Note however, that newlib will only be configured in this situation
# if the --with-newlib option has been given, because otherwise
# 'target-newlib' will appear in skipdirs.
- # linux has rx in libc
- skipdirs="$skipdirs target-librx"
;;
*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- # linux has rx in libc
- skipdirs="$skipdirs target-librx"
;;
i[3456]86-*-mingw32*)
target_configdirs="$target_configdirs target-mingw"
esac
;;
i[3456]86-*-pe)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj}"
;;
i[3456]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss ${libgcj}"
- use_gnu_ld=yes
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
;;
rs6000-*-aix*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
- use_gnu_ld=yes
;;
rs6000-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
# --without-gnu-ld options for the configure script.
if test x${use_gnu_as} = x ; then
- if test x${with_gnu_as} != xno && echo " ${configdirs} " | grep " ${gasdir} " > /dev/null 2>&1 && test -d ${srcdir}/${gasdir} ; then
+ if test x${with_gnu_as} != xno && echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 && test -d ${srcdir}/gas ; then
with_gnu_as=yes
withoptions="$withoptions --with-gnu-as"
fi
if test x${enable_version_specific_runtime_libs} = xyes; then
gxx_include_dir='${libsubdir}/include/g++'
else
- . ${topsrcdir}/config.if
+ . ${srcdir}/config.if
gxx_include_dir='${prefix}/include/${libstdcxx_incdir}'
fi
else
esac
# If we're not building GCC, don't discard standard headers.
- if test -d ${topsrcdir}/gcc; then
+ if test -d ${srcdir}/gcc; then
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
if test "${build}" != "${host}"; then
# the previously-installed cross compiler, so don't bother to add
# flags for directories within the install tree of the compiler
# being built; programs in there won't even run.
-if test "${build}" = "${host}" && test -d ${topsrcdir}/gcc; then
+if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
# Search for pre-installed headers if nothing else fits.
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include'
fi
if test "x${CC_FOR_TARGET+set}" = xset; then
:
-elif test -d ${topsrcdir}/gcc; then
+elif test -d ${srcdir}/gcc; then
CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
elif test "$host" = "$target"; then
CC_FOR_TARGET='$(CC)'
if test "x${GCJ_FOR_TARGET+set}" = xset; then
:
-elif test -d ${topsrcdir}/gcc; then
+elif test -d ${srcdir}/gcc; then
GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
elif test "$host" = "$target"; then
GCJ_FOR_TARGET='gcj'
*) GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
esac
+# Don't use libstdc++-v3's flags to configure/build itself.
+libstdcxx_flags='`case $$dir in libstdc++-v3 | libjava) ;; *) test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags --build-includes;; esac` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+
if test "x${CXX_FOR_TARGET+set}" = xset; then
:
-elif test -d ${topsrcdir}/gcc; then
+elif test -d ${srcdir}/gcc; then
# We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
# of g++ for linking C++ or Java, because g++ has -shared-libgcc by
# default whereas gcc does not.
projects / deliverable / binutils-gdb.git / blobdiff