# these libraries are used by various programs built for the host environment
#
-host_libs="mmalloc libiberty opcodes bfd readline gash db tcl tk tclX itcl"
+host_libs="mmalloc libiberty opcodes bfd readline gash db tcl tk tclX itcl tix"
# start-sanitize-ide
host_libs="${host_libs} libide"
# end-sanitize-ide
# list belongs in this list. those programs are also very likely
# candidates for the "native_only" list which follows
#
-target_tools="target-examples target-groff"
+target_tools="target-examples target-groff target-gperf"
################################################################################
#
# This must be a single line because of the way it is searched by grep in
# the code below.
-native_only="autoconf automake cvs emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms sn gnuserv"
+native_only="autoconf automake cvs emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms sn gnuserv target-gperf"
# directories to be built in a cross environment only
#
i[3456]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
i[3456]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
i[3456]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
+ i[3456]86-*-msdosdjgpp*) host_makefile_frag=config/mh-go32 ;;
*-cygwin32*) host_makefile_frag=config/mh-cygwin32 ;;
*-windows*) host_makefile_frag=config/mh-windows ;;
vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
hppa*) waugh=config/mh-papic ;;
i[3456]86-*) waugh=config/mh-x86pic ;;
sparc64-*) waugh=config/mh-sparcpic ;;
+ powerpc*-*) waugh=config/mh-ppcpic ;;
*) waugh=config/mh-${host_cpu}pic ;;
esac
if [ -f ${srcdir}/${waugh} ]; then
skipdirs="${skipdirs} ${cross_only}"
is_cross_compiler=no
target_subdir=.
+ case "${host}" in
+ # We need multilib support for irix6, to get libiberty built
+ # properly for o32 and n32.
+ mips-sgi-irix6*) target_subdir=${host} ;;
+ esac
else
# similarly, don't build the targets in the 'native only'
# list when building a cross compiler
skipdirs="${skipdirs} ${native_only}"
is_cross_compiler=yes
target_subdir=${target_alias}
- if [ ! -d ${target_subdir} ] ; then
- if mkdir ${target_subdir} ; then true
- else
- echo "'*** could not make ${PWD=`pwd`}/${target_subdir}" 1>&2
- exit 1
- fi
- fi
fi
+if [ ! -d ${target_subdir} ] ; then
+ if mkdir ${target_subdir} ; then true
+ else
+ echo "'*** could not make ${PWD=`pwd`}/${target_subdir}" 1>&2
+ exit 1
+ fi
+fi
+
copy_dirs=
# Handle --with-headers=XXX. The contents of the named directory are
case "${host}" in
i[3456]86-*-vsta)
- noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl db sn gnuserv"
+ noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl tix db sn gnuserv"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide vmake"
# end-sanitize-ide
;;
- i[3456]86-*-go32)
- noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl db sn gnuserv"
+ i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
+ noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db sn gnuserv"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide vmake"
# end-sanitize-ide
;;
*-*-windows*)
# This is only used to build WinGDB...
- configdirs="bfd gdb libiberty opcodes readline sim"
+# note that powerpc-eabi depends on sim configured before gdb.
+ configdirs="bfd libiberty opcodes readline sim gdb"
target_configdirs=
;;
ppc*-*-pe)
- noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl db sn gnuserv"
+ noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl tix db sn gnuserv"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide vmake"
# end-sanitize-ide
;;
alpha-dec-osf*)
# ld works, but does not support shared libraries. emacs doesn't
- # work. newlib is not 64 bit ready. I'm not sure about fileutils or grep.
+ # work. newlib is not 64 bit ready. I'm not sure about fileutils.
# gas doesn't generate exception information.
- noconfigdirs="$noconfigdirs gas ld emacs fileutils grep target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gas ld emacs fileutils target-newlib target-libgloss"
;;
alpha*-*-*vms*)
noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss"
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
-# start-sanitize-arc
arc-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
-# end-sanitize-arc
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
;;
# start-sanitize-d30v
d30v-*-*)
- noconfigdirs="$noconfigdirs tcl tk expect gcc gdb newlib target-librx target-libg++ target-libstdc++ target-libio target-libgloss itcl db sn gnuserv target-libiberty target-newlib target-examples"
+ noconfigdirs="$noconfigdirs tcl tk expect gcc gdb newlib target-librx target-libg++ target-libstdc++ target-libio target-libgloss itcl tix db sn gnuserv target-libiberty target-newlib target-examples"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide vmake"
# end-sanitize-ide
esac
noconfigdirs="$noconfigdirs ld shellutils"
;;
- i[3456]86-*-go32)
+ i[3456]86-*-go32* | i[3456]-*-msdosdjgpp*)
# but don't build gdb
noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
;;
# Can't build gdb for cygwin32 if not native.
case "${host}" in
*-*-cygwin32) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl db sn gnuserv"
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db sn gnuserv"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide vmake"
# end-sanitize-ide
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl db sn gnuserv"
+ noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db sn gnuserv"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide vmake"
# end-sanitize-ide
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl db sn gnuserv"
+ noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db sn gnuserv"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide vmake"
# end-sanitize-ide
sh-*-*)
case "${host}" in
i[3456]86-*-vsta) ;; # don't add gprof back in
- i[3456]86-*-go32) ;; # don't add gprof back in
+ i[3456]86-*-go32*) ;; # don't add gprof back in
+ i[3456]86-*-msdosdjgpp*) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
noconfigdirs="$noconfigdirs target-libgloss"
if [ x${shared} = xyes ]; then
case "${target}" in
hppa*) target_makefile_frag=config/mt-papic ;;
- i[3456]86-*) target_makefile_frag=config/mt-x86pic ;;
+ i[3456]86-*) target_makefile_frag=config/mt-x86pic ;;
+ powerpc*-*) target_makefile_frag=config/mt-ppcpic ;;
*) target_makefile_frag=config/mt-${target_cpu}pic ;;
esac
fi
esac
fi
+# If we are building for a cygwin32 host, then set INSTALL_PROGRAM_ARGS to
+# -x. This will cause programs to be installed with .exe extensions.
+case "${host}" in
+*-*-cygwin32*)
+ sed -e 's/^INSTALL_PROGRAM_ARGS[ ]*=.*$/INSTALL_PROGRAM_ARGS = -x/' \
+ Makefile > Makefile.tem
+ rm -f Makefile
+ mv -f Makefile.tem Makefile
+ ;;
+esac
+
# Record target_configdirs and the configure arguments in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
targargs=`echo "${arguments}" | \
projects / deliverable / binutils-gdb.git / blobdiff