## For more information on these two systems, check out the documentation
## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
-# Copyright (C) 1992-99, 2000, 2001 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+# 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline gash db tcl tk tcl8.1 tk8.1 tclX itcl tix libgui"
+host_libs="intl mmalloc libiberty opcodes bfd readline db tcl tk tclX itcl tix libgui zlib"
-if [ "${enable_gdbgui}" = "yes" ] ; then
- host_libs="${host_libs} libgui"
-fi
-
-# Set up configure/Makefile variables if libstdc++-v3 is to be built.
-if [ "${enable_libstdcxx_v3}" = "yes" ] && test -d $srcdir/libstdc++-v3; then
- libstdcxx_version="target-libstdc++-v3"
- # Don't use libstdc++-v3's flags to configure/build itself.
- libstdcxx_flags='`case $$dir in libstdc++-v3) ;; *) cat $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/libstdc++.INC 2>/dev/null || : ;; esac` -L$$r/$(TARGET_SUBDIR)/libstd++-v3/src -L$$r/$(TARGET_SUBDIR)/libstd++-v3/src/.libs'
-else
- libstdcxx_version="target-libio target-libstdc++"
- libstdcxx_flags='-isystem $$s/libstdc++ -isystem $$s/libstdc++/std -isystem $$s/libstdc++/stl -isystem $$s/libio/ -isystem $$s/libio/stdio -L$$r/$(TARGET_SUBDIR)/libstdc++'
-fi
+libstdcxx_version="target-libstdc++-v3"
+# Don't use libstdc++-v3's flags to configure/build itself.
+libstdcxx_flags='`case $$dir in libstdc++-v3 | libjava) ;; *) test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags --build-includes;; esac` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
-host_tools="texinfo byacc flex bison binutils ld gas gcc cgen sid sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext zip"
+host_tools="texinfo byacc flex bison binutils ld gas gcc cgen sid sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext zip fastjar"
+
+# libgcj represents the runtime libraries only used by gcj.
+libgcj="target-libffi \
+ target-boehm-gc \
+ target-zlib \
+ target-qthreads \
+ target-libjava"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
target_libs="target-libiberty \
target-libgloss \
target-newlib \
+ target-librx \
${libstdcxx_version} \
target-libf2c \
- target-libchill \
- target-libffi \
- target-libjava \
- target-zlib \
- target-boehm-gc \
- target-qthreads \
+ ${libgcj}
target-libobjc"
# these tools are built using the target libs, and are intended to run only
#
# This must be a single line because of the way it is searched by grep in
# the code below.
-native_only="autoconf automake libtool cvssrc emacs emacs19 fileutils find gawk gettext grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time ash bash bzip2 prms snavigator gnuserv target-gperf"
+native_only="autoconf automake libtool cvssrc fileutils find gawk gettext grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl apache inet time ash bash bzip2 prms snavigator gnuserv target-gperf"
# directories to be built in a cross environment only
#
# per-host:
# Work in distributions that contain no compiler tools, like Autoconf.
-if [ -d ${srcdir}/config ]; then
+tentative_cc=""
+if test -d ${srcdir}/config ; then
case "${host}" in
m68k-hp-hpux*)
- host_makefile_frag="${host_makefile_frag} config/mh-hp300"
+ # Avoid "too much defining" errors from HPUX compiler.
+ tentative_cc="cc -Wp,-H256000"
+ host_makefile_frag="config/mh-hp300"
;;
m68k-apollo-sysv*)
- host_makefile_frag="${host_makefile_frag} config/mh-apollo68"
+ tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
+ host_makefile_frag="config/mh-apollo68"
;;
m68k-apollo-bsd*)
- host_makefile_frag="${host_makefile_frag} config/mh-a68bsd"
+ #None of the Apollo compilers can compile gas or binutils. The preprocessor
+ # chokes on bfd, the compiler won't let you assign integers to enums, and
+ # other problems. Defining CC to gcc is a questionable way to say "don't use
+ # the apollo compiler" (the preferred version of GCC could be called cc,
+ # or whatever), but I'm not sure leaving CC as cc is any better...
+ #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
+ tentative_cc=gcc
+ host_makefile_frag="config/mh-a68bsd"
;;
m88k-dg-dgux*)
- host_makefile_frag="${host_makefile_frag} config/mh-dgux"
+ tentative_cc="gcc -Wall -ansi -D__using_DGUX"
+ host_makefile_frag="config/mh-dgux"
;;
m88k-harris-cxux*)
- host_makefile_frag="${host_makefile_frag} config/mh-cxux"
+ # Under CX/UX, we want to tell the compiler to use ANSI mode.
+ tentative_cc="cc -Xa"
+ host_makefile_frag="config/mh-cxux"
;;
m88k-motorola-sysv*)
- host_makefile_frag="${host_makefile_frag} config/mh-delta88"
+ host_makefile_frag="config/mh-delta88"
;;
mips*-dec-ultrix*)
- host_makefile_frag="${host_makefile_frag} config/mh-decstation"
+ tentative_cc="cc -Wf,-XNg1000"
+ host_makefile_frag="config/mh-decstation"
;;
mips*-nec-sysv4*)
- host_makefile_frag="${host_makefile_frag} config/mh-necv4"
+ # The C compiler on NEC MIPS SVR4 needs bigger tables.
+ tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
+ host_makefile_frag="config/mh-necv4"
;;
mips*-sgi-irix6*)
- host_makefile_frag="${host_makefile_frag} config/mh-irix6"
+ host_makefile_frag="config/mh-irix6"
;;
mips*-sgi-irix5*)
- host_makefile_frag="${host_makefile_frag} config/mh-irix5"
+ host_makefile_frag="config/mh-irix5"
;;
mips*-sgi-irix4*)
- host_makefile_frag="${host_makefile_frag} config/mh-irix4"
+ # Tell compiler to use K&R C. We can't compile under the SGI Ansi
+ # environment. Also bump switch table size so that cp-parse will
+ # compile. Bump string length limit so linker builds.
+ tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
;;
mips*-sgi-irix3*)
- host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ host_makefile_frag="config/mh-sysv"
;;
mips*-*-sysv4*)
- host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
+ host_makefile_frag="config/mh-sysv4"
;;
mips*-*-sysv*)
- host_makefile_frag="${host_makefile_frag} config/mh-riscos"
+ # This is for a MIPS running RISC/os 4.52C.
+
+ # This is needed for GDB, but needs to be in the top-level make because
+ # if a library is compiled with the bsd headers and gets linked with the
+ # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
+ # a different size).
+ # ptrace(2) apparently has problems in the BSD environment. No workaround is
+ # known except to select the sysv environment. Could we use /proc instead?
+ # These "sysv environments" and "bsd environments" often end up being a pain.
+ #
+ # This is not part of CFLAGS because perhaps not all C compilers have this
+ # option.
+ tentative_cc="cc -systype sysv"
+ host_makefile_frag="config/mh-riscos"
;;
i370-ibm-opened*)
- host_makefile_frag="${host_makefile_frag} config/mh-openedition"
+ tentative_cc="c89"
+ host_makefile_frag="config/mh-openedition"
;;
i[3456]86-*-sysv5*)
- host_makefile_frag="${host_makefile_frag} config/mh-sysv5"
+ host_makefile_frag="config/mh-sysv5"
;;
i[3456]86-*-dgux*)
- host_makefile_frag="${host_makefile_frag} config/mh-dgux386"
+ tentative_cc="gcc -Wall -ansi -D__using_DGUX"
+ host_makefile_frag="config/mh-dgux386"
;;
i[3456]86-ncr-sysv4.3*)
- host_makefile_frag="${host_makefile_frag} config/mh-ncrsvr43"
+ # The MetaWare compiler will generate a copyright message unless you
+ # turn it off by adding the -Hnocopyr flag.
+ tentative_cc="cc -Hnocopyr"
+ host_makefile_frag="config/mh-ncrsvr43"
;;
i[3456]86-ncr-sysv4*)
- host_makefile_frag="${host_makefile_frag} config/mh-ncr3000"
+ # for an NCR 3000 (i486/SVR4) system.
+ # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
+ # This compiler not only emits obnoxious copyright messages every time
+ # you run it, but it chokes and dies on a whole bunch of GNU source
+ # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
+ tentative_cc="/usr/ccs/ATT/cc"
+ host_makefile_frag="config/mh-ncr3000"
;;
i[3456]86-*-sco3.2v5*)
- host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ host_makefile_frag="config/mh-sysv"
;;
i[3456]86-*-sco*)
- host_makefile_frag="${host_makefile_frag} config/mh-sco"
+ # The native C compiler botches some simple uses of const. Unfortunately,
+ # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
+ tentative_cc="cc -Dconst="
+ host_makefile_frag="config/mh-sco"
;;
i[3456]86-*-udk*)
- host_makefile_frag="${host_makefile_frag} config/mh-sysv5"
+ host_makefile_frag="config/mh-sysv5"
;;
i[3456]86-*-isc*)
- host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ host_makefile_frag="config/mh-sysv"
;;
i[3456]86-*-solaris2*)
- host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
+ host_makefile_frag="config/mh-sysv4"
;;
i[3456]86-*-aix*)
- host_makefile_frag="${host_makefile_frag} config/mh-aix386"
+ host_makefile_frag="config/mh-aix386"
;;
i[3456]86-*-msdosdjgpp*)
- host_makefile_frag="${host_makefile_frag} config/mh-djgpp"
+ host_makefile_frag="config/mh-djgpp"
;;
*-cygwin*)
- host_makefile_frag="${host_makefile_frag} config/mh-cygwin"
+ host_makefile_frag="config/mh-cygwin"
;;
*-mingw32*)
- host_makefile_frag="${host_makefile_frag} config/mh-mingw32"
+ host_makefile_frag="config/mh-mingw32"
;;
*-interix*)
- host_makefile_frag="${host_makefile_frag} config/mh-interix"
- ;;
- *-windows*)
- host_makefile_frag="${host_makefile_frag} config/mh-windows"
+ host_makefile_frag="config/mh-interix"
;;
vax-*-ultrix2*)
- host_makefile_frag="${host_makefile_frag} config/mh-vaxult2"
+ # The old BSD pcc isn't up to compiling parts of gdb so use gcc
+ tentative_cc=gcc
;;
*-*-solaris2*)
- host_makefile_frag="${host_makefile_frag} config/mh-solaris"
+ host_makefile_frag="config/mh-solaris"
;;
m68k-sun-sunos*)
- host_makefile_frag="${host_makefile_frag} config/mh-sun3"
+ # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
+ # without overflowing the jump tables (-J says to use a 32 bit table)
+ tentative_cc="cc -J"
;;
*-hp-hpux[78]*)
- host_makefile_frag="${host_makefile_frag} config/mh-hpux8"
+ tentative_cc="cc -Wp,-H256000"
+ host_makefile_frag="config/mh-hpux8"
;;
*-hp-hpux*)
- host_makefile_frag="${host_makefile_frag} config/mh-hpux"
+ tentative_cc="cc -Wp,-H256000"
+ host_makefile_frag="config/mh-hpux"
;;
*-*-hiux*)
- host_makefile_frag="${host_makefile_frag} config/mh-hpux"
+ tentative_cc="cc -Wp,-H256000"
+ host_makefile_frag="config/mh-hpux"
;;
rs6000-*-lynxos*)
- host_makefile_frag="${host_makefile_frag} config/mh-lynxrs6k"
+ # /bin/cc is less than useful for our purposes. Always use GCC
+ tentative_cc="/usr/cygnus/progressive/bin/gcc"
+ host_makefile_frag="config/mh-lynxrs6k"
;;
*-*-lynxos*)
- host_makefile_frag="${host_makefile_frag} config/mh-lynxos"
+ # /bin/cc is less than useful for our purposes. Always use GCC
+ tentative_cc="/bin/gcc"
;;
*-*-sysv4*)
- host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
+ host_makefile_frag="config/mh-sysv4"
;;
*-*-sysv*)
- host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ host_makefile_frag="config/mh-sysv"
;;
esac
fi
# If we aren't going to be using gcc, see if we can extract a definition
# of CC from the fragment.
-if [ -z "${CC}" ] && [ "${build}" = "${host}" ]; then
+# Actually, use the 'pre-extracted' version above.
+if test -z "${CC}" && test "${build}" = "${host}" ; then
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
found=
for dir in $PATH; do
fi
done
IFS="$save_ifs"
- if [ -z "${found}" ] && [ -n "${host_makefile_frag}" ] && [ -f "${srcdir}/${host_makefile_frag}" ]; then
- xx=`sed -n -e 's/^[ ]*CC[ ]*=[ ]*\(.*\)$/\1/p' < ${srcdir}/${host_makefile_frag}`
- if [ -n "${xx}" ] ; then
- CC=$xx
- fi
+ if test -z "${found}" && test -n "${tentative_cc}" ; then
+ CC=$tentative_cc
fi
fi
# We default to --with-shared on platforms where -fpic is meaningless.
# Well, we don't yet, but we will.
-if false && [ "${host}" = "${target}" ] && [ x${enable_shared} = x ]; then
+if false && test "${host}" = "${target}" && test x${enable_shared} = x ; then
case "${target}" in
alpha*-dec-osf*) enable_shared=yes ;;
alpha*-*-linux*) enable_shared=yes ;;
esac
fi
+# hpux11 in 64bit mode has libraries in a weird place. Arrange to find
+# them automatically.
+case "${host}" in
+ hppa*64*-*-hpux11*)
+ withoptions="$withoptions -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
+ ;;
+esac
+
case "${enable_shared}" in
yes) shared=yes ;;
no) shared=no ;;
*) shared=yes ;;
esac
-if [ x${shared} = xyes ]; then
- case "${host}" in
- alpha*-*-linux*)
- host_makefile_frag="${host_makefile_frag} config/mh-elfalphapic"
- ;;
- arm*-*-*)
- host_makefile_frag="${host_makefile_frag} config/mh-armpic"
- ;;
- hppa*-*-*)
- host_makefile_frag="${host_makefile_frag} config/mh-papic"
- ;;
- i[3456]86-*-cygwin*)
- # We don't want -fPIC on Cygwin.
- ;;
- i[3456]86-*-*)
- host_makefile_frag="${host_makefile_frag} config/mh-x86pic"
- ;;
- i370-*-*)
- host_makefile_frag="${host_makefile_frag} config/mh-i370pic"
- ;;
- ia64-*-*)
- host_makefile_frag="${host_makefile_frag} config/mh-ia64pic"
- ;;
- sparc64-*-*)
- host_makefile_frag="${host_makefile_frag} config/mh-sparcpic"
- ;;
- powerpc*-*-aix*)
- # We don't want -fPIC on AIX.
- ;;
- powerpc*-*-*)
- host_makefile_frag="${host_makefile_frag} config/mh-ppcpic"
- ;;
- s390-* | s390x-*)
- host_makefile_frag="${host_makefile_frag} config/mh-s390pic"
- ;;
- *-*-*)
- if test -f ${srcdir}/config/mh-${host_cpu}pic; then
- host_makefile_frag="${host_makefile_frag} config/mh-${host_cpu}pic"
- fi
- ;;
- esac
-fi
-
rm -f mh-frag
-if [ -n "${host_makefile_frag}" ] ; then
+if test -n "${host_makefile_frag}" ; then
for f in ${host_makefile_frag}
do
cat ${srcdir}/$f >> mh-frag
powerpc-*-netware*)
target_makefile_frag="${target_makefile_frag} config/mt-netware"
;;
- *-*-linux-gnu*)
+ alpha*-*-linux*)
+ target_makefile_frag="${target_makefile_frag} config/mt-linux"
+ target_makefile_frag="${target_makefile_frag} config/mt-alphaieee"
+ ;;
+ alpha*-*-*)
+ target_makefile_frag="${target_makefile_frag} config/mt-alphaieee"
+ ;;
+ *-*-linux*)
target_makefile_frag="${target_makefile_frag} config/mt-linux"
;;
*-*-aix4.[3456789]* | *-*-aix[56789].*)
yes | "") # the default value for this tree is that X11 is available
;;
no)
- skipdirs="${skipdirs} tk libgui gash"
+ skipdirs="${skipdirs} tk libgui"
;;
*)
echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
is_cross_compiler=
-if [ x"${host}" = x"${target}" ] ; then
+if test x"${host}" = x"${target}" ; then
# when doing a native toolchain, don't build the targets
# that are in the 'cross only' list
skipdirs="${skipdirs} ${cross_only}"
# can reliably find it.
target_subdir=${target_alias}
-if [ ! -d ${target_subdir} ] ; then
+if test ! -d ${target_subdir} ; then
if mkdir ${target_subdir} ; then true
else
- echo "'*** could not make ${PWD=`pwd`}/${target_subdir}" 1>&2
+ echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${target_subdir}" 1>&2
exit 1
fi
fi
+build_subdir=${build_alias}
+
+if test x"${build_alias}" != x"${host}" ; then
+ if test ! -d ${build_subdir} ; then
+ if mkdir ${build_subdir} ; then true
+ else
+ echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${build_subdir}" 1>&2
+ exit 1
+ fi
+ fi
+fi
+
copy_dirs=
# Handle --with-headers=XXX. The contents of the named directory are
# copied to $(tooldir)/sys-include.
-if [ x"${with_headers}" != x ]; then
- if [ x${is_cross_compiler} = xno ]; then
+if test x"${with_headers}" != x ; then
+ if test x${is_cross_compiler} = xno ; then
echo 1>&2 '***' --with-headers is only supported when cross compiling
exit 1
fi
# Handle --with-libs=XXX. Multiple directories are permitted. The
# contents are copied to $(tooldir)/lib.
-if [ x"${with_libs}" != x ]; then
- if [ x${is_cross_compiler} = xno ]; then
+if test x"${with_libs}" != x ; then
+ if test x${is_cross_compiler} = xno ; then
echo 1>&2 '***' --with-libs is only supported when cross compiling
exit 1
fi
# If both --with-headers and --with-libs are specified, default to
# --without-newlib.
-if [ x"${with_headers}" != x ] && [ x"${with_libs}" != x ]; then
- if [ x"${with_newlib}" = x ]; then
+if test x"${with_headers}" != x && test x"${with_libs}" != x ; then
+ if test x"${with_newlib}" = x ; then
with_newlib=no
fi
fi
# Recognize --with-newlib/--without-newlib.
-if [ x${with_newlib} = xno ]; then
+if test x${with_newlib} = xno ; then
skipdirs="${skipdirs} target-newlib"
-elif [ x${with_newlib} = xyes ]; then
+elif test x${with_newlib} = xyes ; then
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
fi
# Default to using --with-stabs for certain targets.
-if [ x${with_stabs} = x ]; then
+if test x${with_stabs} = x ; then
case "${target}" in
mips*-*-irix6*)
;;
# Handle ${copy_dirs}
set fnord ${copy_dirs}
shift
-while [ $# != 0 ]; do
- if [ -f $2/COPIED ] && [ x"`cat $2/COPIED`" = x"$1" ]; then
+while test $# != 0 ; do
+ if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
:
else
echo Copying $1 to $2
# Use the install script to create the directory and all required
# parent directories.
- if [ -d $2 ]; then
+ if test -d $2 ; then
:
else
echo >config.temp
noconfigdirs=""
case "${host}" in
+ hppa*64*-*-*)
+ noconfigdirs="$noconfigdirs byacc"
+ ;;
i[3456]86-*-vsta)
noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext"
;;
i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
- noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext libffi"
+ noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile apache inet itcl tix db snavigator gnuserv libffi"
;;
i[3456]86-*-mingw32*)
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv"
;;
esac
-
# Save it here so that, even in case of --enable-libgcj, if the Java
# front-end isn't enabled, we still get libgcj disabled.
libgcj_saved=$libgcj
esac
case "${target}" in
+ *-*-chorusos)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ ;;
+ *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ ;;
+ *-*-netbsd*)
+ # Skip some stuff on all NetBSD configurations.
+ skipdirs="$skipdirs target-newlib target-libiberty target-libgloss"
+
+ # Skip some stuff that's unsupported on some NetBSD configurations.
+ case "${target}" in
+ i*86-*-netbsdelf*) ;;
+ *)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ esac
+ ;;
*-*-netware)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-newlib target-libiberty target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-newlib target-libiberty target-libgloss ${libgcj}"
;;
*-*-rtems*)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ case ${target} in
+ h8300*-*-* | h8500-*-*)
+ noconfigdirs="$noconfigdirs target-libf2c"
+ ;;
+ *) ;;
+ esac
;;
*-*-vxworks*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
alpha*-dec-osf*)
- # ld works, but does not support shared libraries. emacs doesn't
- # work. newlib is not 64 bit ready. I'm not sure about fileutils.
+ # ld works, but does not support shared libraries.
+ # newlib is not 64 bit ready. I'm not sure about fileutils.
# gas doesn't generate exception information.
- noconfigdirs="$noconfigdirs gas ld emacs fileutils target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
;;
alpha*-*-*vms*)
- noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
;;
- alpha*-*-*)
+ alpha*-*-linux*)
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ # linux has rx in libc
+ skipdirs="$skipdirs target-librx"
;;
+ alpha*-*-freebsd*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ alpha*-*-*)
+ # newlib is not 64 bit ready
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ ;;
+ sh-*-linux*)
+ noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ # linux has rx in libc
+ skipdirs="$skipdirs target-librx"
+ ;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
- noconfigdirs="$noconfigdirs target-libjava target-libffi target-zlib"
- noconfigdirs="$noconfigdirs target-boehm-gc target-qthreads target-examples"
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs target-examples"
noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim"
noconfigdirs="$noconfigdirs expect dejagnu"
esac
;;
arc-*-*)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
arm-*-pe*)
- noconfigdirs="$noconfigdirs target-libgloss"
- ;;
- arm-*-coff*)
- noconfigdirs="$noconfigdirs target-libgloss"
- if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
- ;;
- arm-*-elf*)
- noconfigdirs="$noconfigdirs target-libgloss"
- if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
arm-*-oabi*)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
thumb-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
thumb-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
thumb-*-oabi)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
strongarm-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
- if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
strongarm-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
- if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
xscale-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
- if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
+ noconfigdirs="$noconfigdirs target-libffi target-qthreads"
;;
xscale-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
- if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
thumb-*-pe)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
arm-*-riscix*)
- noconfigdirs="$noconfigdirs ld target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
+ ;;
+ avr-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty ${libstdcxx_version} ${libgcj}"
;;
c4x-*-*)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
;;
c54x*-*-* | tic54x-*-*)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi gcc gdb newlib"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj} gcc gdb newlib"
+ ;;
+ cris-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
d10v-*-*)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-librx ${libstdcxx_version} target-libgloss ${libgcj}"
;;
d30v-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
fr30-*-elf*)
- if [ x${is_cross_compiler} != xno ] ; then
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
;;
noconfigdirs="$noconfigdirs target-libgloss"
;;
h8500-*-*)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj} target-libf2c"
+ ;;
+ hppa*64*-*-linux* | parisc*64*-*-linux*)
+ # In this case, it's because the hppa64-linux target is for
+ # the kernel only at this point and has no libc, and thus no
+ # headers, crt*.o, etc., all of which are needed by these.
+ noconfigdirs="$noconfigdirs target-zlib"
;;
hppa*-*-*elf* | \
- hppa*-*-linux-gnu* | \
+ parisc*-*-linux* | hppa*-*-linux* | \
hppa*-*-lites* | \
hppa*64*-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
# Do configure ld/binutils/gas for this case.
;;
hppa*-*-*)
- # HP's C compiler doesn't handle Emacs correctly (but on BSD and Mach
- # cc is gcc, and on any system a user should be able to link cc to
- # whatever they want. FIXME, emacs emacs19).
- case "${CC}" in
- "" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
- *) ;;
- esac
# According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
# build on HP-UX 10.20.
noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
# No gdb support yet.
noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
;;
+ ia64*-**-hpux*)
+ # No gdb or ld support yet.
+ noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb ld"
+ ;;
i[3456]86-*-coff | i[3456]86-*-elf)
- if [ x${is_cross_compiler} != xno ] ; then
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
;;
- i[3456]86-*-go32* | i[3456]-*-msdosdjgpp*)
- # but don't build gdb
- noconfigdirs="$noconfigdirs gdb ${libstdcxx_version} target-libffi"
+ i[34567]86-*-freebsd*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ s390*-*-linux*)
+ # The libffi port is not yet in the GCC tree
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ # linux has rx in libc
+ skipdirs="$skipdirs target-librx"
+ ;;
+ i[3456]86-*-linux*)
+ # This section makes it possible to build newlib natively on linux.
+ # If we are using a cross compiler then don't configure newlib.
+ if test x${is_cross_compiler} != xno ; then
+ noconfigdirs="$noconfigdirs target-newlib"
+ fi
+ noconfigdirs="$noconfigdirs target-libgloss"
+ # If we are not using a cross compiler, do configure newlib.
+ # Note however, that newlib will only be configured in this situation
+ # if the --with-newlib option has been given, because otherwise
+ # 'target-newlib' will appear in skipdirs.
+ # linux has rx in libc
+ skipdirs="$skipdirs target-librx"
+ ;;
+ *-*-linux*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ # linux has rx in libc
+ skipdirs="$skipdirs target-librx"
;;
i[3456]86-*-mingw32*)
target_configdirs="$target_configdirs target-mingw"
esac
;;
i[3456]86-*-pe)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
;;
i[3456]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
# and is not configured to handle mixed ELF and COFF.
- noconfigdirs="$noconfigdirs ld target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
i[3456]86-*-sco*)
- noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
i[3456]86-*-solaris2*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
i[3456]86-*-sysv4*)
- # The SYSV4 C compiler doesn't handle Emacs correctly
- case "${CC}" in
- "" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
- *) ;;
- esac
- # but that's okay since emacs doesn't work anyway
- noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
i[3456]86-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
- m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-librx target-libg++ target-libstdc++ target-libio target-libf2c target-libchill target-zlib target-libobjc"
+ m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty ${libstdcxx_version} ${libgcj}"
;;
- m68k-*-elf*)
- if [ x${is_cross_compiler} != xno ] ; then
+ m68k-*-elf*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
m68k-*-coff*)
- if [ x${is_cross_compiler} != xno ] ; then
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
+ mcore-*-pe*)
+ # The EPOC C++ environment does not support exceptions or rtti,
+ # and so building libstdc++-v3 tends not to always work.
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
+ mmix-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
mn10200-*-*)
- noconfigdirs="$noconfigdirs target-libffi"
- if [ x${is_cross_compiler} != xno ] ; then
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
;;
mn10300-*-*)
- noconfigdirs="$noconfigdirs target-libffi"
- if [ x${is_cross_compiler} != xno ] ; then
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
+ noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss ${libgcj}"
use_gnu_ld=yes
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db snavigator gnuserv target-libffi"
+ noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db snavigator gnuserv ${libgcj}"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db snavigator gnuserv target-libffi"
+ noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db snavigator gnuserv ${libgcj}"
;;
powerpc-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
powerpc-*-eabi)
- if [ x${is_cross_compiler} != xno ] ; then
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
;;
rs6000-*-lynxos*)
# The CVS server code doesn't work on the RS/6000
- noconfigdirs="$noconfigdirs target-newlib gprof cvssrc target-libffi"
+ noconfigdirs="$noconfigdirs target-newlib gprof cvssrc ${libgcj}"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof target-libffi"
+ noconfigdirs="$noconfigdirs gprof ${libgcj}"
use_gnu_ld=yes
;;
rs6000-*-*)
- noconfigdirs="$noconfigdirs gprof target-libffi"
+ noconfigdirs="$noconfigdirs gprof ${libgcj}"
;;
m68k-apollo-*)
- noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
;;
mips*-*-irix5*)
# The GNU linker does not support shared libraries.
- # emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
- noconfigdirs="$noconfigdirs ld gprof emacs target-libgloss"
+ noconfigdirs="$noconfigdirs ld gprof target-libgloss ${libgcj}"
;;
mips*-*-irix6*)
# The GNU assembler does not support IRIX 6.
- # emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
# Linking libjava exceeds command-line length limits on at least
# IRIX 6.2, but not on IRIX 6.5.
# Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
# <oldham@codesourcery.com>
- noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gas gprof target-libgloss ${libgcj}"
;;
mips*-dec-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
mips*-*-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
mipstx39-*-*)
- noconfigdirs="$noconfigdirs gprof target-libffi" # same as generic mips
+ noconfigdirs="$noconfigdirs gprof ${libgcj}" # same as generic mips
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
;;
+ mips*-*-linux*)
+ noconfigdirs="$noconfigdirs target-libffi"
+ ;;
mips*-*-*)
- noconfigdirs="$noconfigdirs gprof target-libffi"
+ noconfigdirs="$noconfigdirs gprof ${libgcj}"
;;
romp-*-*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
;;
sh-*-*)
case "${host}" in
i[3456]86-*-msdosdjgpp*) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ ;;
+ sh64-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
sparc-*-elf*)
- if [ x${is_cross_compiler} != xno ] ; then
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparc64-*-elf*)
- if [ x${is_cross_compiler} != xno ] ; then
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
- noconfigdirs="$noconfigdirs target-libffi"
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparclite-*-*)
- if [ x${is_cross_compiler} != xno ] ; then
+ if test x${is_cross_compiler} != xno ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
- noconfigdirs="$noconfigdirs target-libffi"
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparc-*-sunos4*)
- if [ x${is_cross_compiler} != xno ] ; then
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ if test x${is_cross_compiler} != xno ; then
noconfigdirs="$noconfigdirs gdb gdbtest target-newlib target-libgloss"
else
use_gnu_ld=no
fi
;;
- sparc-*-solaris*)
- case "${host}" in
- sparc-*-solaris2.8)
- # According to Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>, libjava
- # won't build correctly on Solaris 8 if there's a
- # previously-installed version of GCC in the configured prefix.
- # This problem does not show up on earlier versions of Solaris.
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- esac
+ sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
;;
v810-*-*)
- noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld ${libstdcxx_version} opcodes target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld ${libstdcxx_version} opcodes target-libgloss ${libgcj}"
;;
v850-*-*)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
v850e-*-*)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
v850ea-*-*)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
vax-*-vms)
- noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
;;
vax-*-*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
*-*-lynxos*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
*-*-macos* | \
*-*-mpw*)
# Macs want a resource compiler.
configdirs="$configdirs grez"
- noconfigdirs="$noconfigdirs target-libffi"
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ *-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
esac
# If we aren't building newlib, then don't build libgloss, since libgloss
esac
# Make sure we don't let GNU ld be added if we didn't want it.
-if [ x$with_gnu_ld = xno ]; then
+if test x$with_gnu_ld = xno ; then
use_gnu_ld=no
noconfigdirs="$noconfigdirs ld"
fi
# Make sure we don't let GNU as be added if we didn't want it.
-if [ x$with_gnu_as = xno ]; then
+if test x$with_gnu_as = xno ; then
use_gnu_as=no
noconfigdirs="$noconfigdirs gas"
fi
# Look if the user specified --enable-languages="..."; if not, use
# the environment variable $LANGUAGES if defined. $LANGUAGES might
# go away some day.
+# NB: embedded tabs in this IF block -- do not untabify
if test x"${enable_languages+set}" != xset; then
if test x"${LANGUAGES+set}" = xset; then
- enable_languages="`echo ${LANGUAGES} | tr ' ' ','`"
+ enable_languages="${LANGUAGES}"
+ echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
else
enable_languages=all
fi
else
- if test x"${enable_languages}" = x; then
- echo configure.in: --enable-languages needs at least one argument 1>&2
+ if test x"${enable_languages}" = x ||
+ test x"${enable_languages}" = xyes;
+ then
+ echo configure.in: --enable-languages needs at least one language argument 1>&2
exit 1
fi
fi
+enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
+
+# First scan to see if an enabled language requires some other language.
+# We assume that a given config-lang.in will list all the language
+# front ends it requires, even if some are required indirectly.
+for lang in ${srcdir}/gcc/*/config-lang.in ..
+do
+ case $lang in
+ ..)
+ ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in)
+ ;;
+ *)
+ lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
+ this_lang_requires=`sed -n -e 's,^lang_requires=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_requires=\([^ ]*\).*$,\1,p' $lang`
+ for other in $this_lang_requires
+ do
+ case ,${enable_languages}, in
+ *,$other,*)
+ ;;
+ *,all,*)
+ ;;
+ *,$lang_alias,*)
+ echo " \`$other' language required by \`$lang_alias'; enabling" 1>&2
+ enable_languages="$enable_languages,$other"
+ ;;
+ esac
+ done
+ ;;
+ esac
+done
+
subdirs=
for lang in ${srcdir}/gcc/*/config-lang.in ..
do
*)
lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
this_lang_libs=`sed -n -e 's,^target_libs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^target_libs=\([^ ]*\).*$,\1,p' $lang`
+ this_lang_dirs=`sed -n -e 's,^lang_dirs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_dirs=\([^ ]*\).*$,\1,p' $lang`
build_by_default=`sed -n -e 's,^build_by_default=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^build_by_default=\([^ ]*\).*$,\1,p' $lang`
if test "x$lang_alias" = x
then
if test x"${add_this_lang}" = xyes; then
eval target_libs='"$target_libs "'\"$this_lang_libs\"
else
- eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs\"
+ eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs $this_lang_dirs\"
fi
;;
esac
done
-
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
# $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
notsupp=""
for dir in . $skipdirs $noconfigdirs ; do
dirname=`echo $dir | sed -e s/target-//g`
- if [ $dir != . ] && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
- if [ -r $srcdir/$dirname/configure ] \
- || [ -r $srcdir/$dirname/configure.in ]; then
+ if test -r $srcdir/$dirname/configure \
+ || test -r $srcdir/$dirname/configure.in ; then
if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
true
else
fi
fi
fi
- if [ $dir != . ] && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
- if [ -r $srcdir/$dirname/configure ] \
- || [ -r $srcdir/$dirname/configure.in ]; then
+ if test -r $srcdir/$dirname/configure \
+ || test -r $srcdir/$dirname/configure.in ; then
if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
true
else
# Sometimes the tools are distributed with libiberty but with no other
# libraries. In that case, we don't want to build target-libiberty.
-if [ -n "${target_configdirs}" ]; then
+if test -n "${target_configdirs}" ; then
others=
for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
- if [ "$i" != "libiberty" ]; then
- if [ -r $srcdir/$i/configure ] || [ -r $srcdir/$i/configure.in ]; then
+ if test "$i" != "libiberty" ; then
+ if test -r $srcdir/$i/configure || test -r $srcdir/$i/configure.in ; then
others=yes;
break;
fi
fi
done
- if [ -z "${others}" ]; then
+ if test -z "${others}" ; then
target_configdirs=
fi
fi
# Deconfigure all subdirectories, in case we are changing the
# configuration from one where a subdirectory is supported to one where it
# is not.
-if [ -z "${norecursion}" ] && [ -n "${configdirs}" ]; then
+if test -z "${norecursion}" && test -n "${configdirs}" ; then
for i in `echo ${configdirs} | sed -e s/target-//g` ; do
rm -f $i/Makefile
done
fi
-if [ -z "${norecursion}" ] && [ -n "${target_configdirs}" ]; then
+if test -z "${norecursion}" && test -n "${target_configdirs}" ; then
for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
rm -f ${target_subdir}/$i/Makefile
done
fi
+# Quietly strip out all directories which aren't configurable in this tree.
+# This relies on all configurable subdirectories being autoconfiscated, which
+# is now the case.
+configdirs_all="$configdirs"
+configdirs=
+for i in ${configdirs_all} ; do
+ if test -f ${srcdir}/$i/configure ; then
+ configdirs="${configdirs} $i"
+ fi
+done
+target_configdirs_all="$target_configdirs"
+target_configdirs=
+for i in ${target_configdirs_all} ; do
+ j=`echo $i | sed -e s/target-//g`
+ if test -f ${srcdir}/$j/configure ; then
+ target_configdirs="${target_configdirs} $i"
+ fi
+done
+
# Produce a warning message for the subdirs we can't configure.
# This isn't especially interesting in the Cygnus tree, but in the individual
# FSF releases, it's important to let people know when their machine isn't
# supported by the one or two programs in a package.
-if [ -n "${notsupp}" ] && [ -z "${norecursion}" ]; then
+if test -n "${notsupp}" && test -z "${norecursion}" ; then
# If $appdirs is non-empty, at least one of those directories must still
# be configured, or we error out. (E.g., if the gas release supports a
# specified target in some subdirs but not the gas subdir, we shouldn't
# pretend that all is well.)
- if [ -n "$appdirs" ]; then
+ if test -n "$appdirs" ; then
for dir in $appdirs ; do
- if [ -r $dir/Makefile.in ]; then
+ if test -r $dir/Makefile.in ; then
if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
appdirs=""
break
fi
fi
done
- if [ -n "$appdirs" ]; then
+ if test -n "$appdirs" ; then
echo "*** This configuration is not supported by this package." 1>&2
exit 1
fi
# want to do that, then you should use the --without-gnu-as and
# --without-gnu-ld options for the configure script.
-if [ x${use_gnu_as} = x ] ; then
- if [ x${with_gnu_as} != xno ] && echo " ${configdirs} " | grep " ${gasdir} " > /dev/null 2>&1 && [ -d ${srcdir}/${gasdir} ] ; then
+if test x${use_gnu_as} = x ; then
+ if test x${with_gnu_as} != xno && echo " ${configdirs} " | grep " ${gasdir} " > /dev/null 2>&1 && test -d ${srcdir}/${gasdir} ; then
with_gnu_as=yes
withoptions="$withoptions --with-gnu-as"
fi
fi
-if [ x${use_gnu_ld} = x ] ; then
- if [ x${with_gnu_ld} != xno ] && echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 && [ -d ${srcdir}/ld ] ; then
+if test x${use_gnu_ld} = x ; then
+ if test x${with_gnu_ld} != xno && echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 && test -d ${srcdir}/ld ; then
with_gnu_ld=yes
withoptions="$withoptions --with-gnu-ld"
fi
# If using newlib, add --with-newlib to the withoptions so that gcc/configure
# can detect this case.
-if [ x${with_newlib} != xno ] && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 && [ -d ${srcdir}/newlib ] ; then
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
with_newlib=yes
withoptions="$withoptions --with-newlib"
fi
-if [ x${shared} = xyes ]; then
- case "${target}" in
- hppa*)
- target_makefile_frag="${target_makefile_frag} config/mt-papic"
- ;;
- i[3456]86-*)
- target_makefile_frag="${target_makefile_frag} config/mt-x86pic"
- ;;
- ia64-*)
- target_makefile_frag="${target_makefile_frag} config/mt-ia64pic"
- ;;
- powerpc*-*-aix*)
- # We don't want -fPIC on AIX.
- ;;
- powerpc*-*)
- target_makefile_frag="${target_makefile_frag} config/mt-ppcpic"
- ;;
- alpha*-*-linux*)
- target_makefile_frag="${target_makefile_frag} config/mt-elfalphapic"
- ;;
- *)
- if test -f ${srcdir}/config/mt-${target_cpu}pic; then
- target_makefile_frag="${target_makefile_frag} config/mt-${target_cpu}pic"
- fi
- ;;
- esac
-fi
-
rm -f mt-frag
-if [ -n "${target_makefile_frag}" ] ; then
+if test -n "${target_makefile_frag}" ; then
for f in ${target_makefile_frag}
do
cat ${srcdir}/$f >> mt-frag
target_makefile_frag=mt-frag
fi
+case "$host" in
+ *msdosdjgpp*)
+ enable_gdbtk=no ;;
+esac
+# Determine whether gdb needs tk/tcl or not.
+case "$enable_gdbtk" in
+ no)
+ GDB_TK="" ;;
+ *)
+ GDB_TK="all-tcl all-tk all-itcl all-tix all-libgui" ;;
+esac
+
# post-target:
# Make sure that the compiler is able to generate an executable. If it
# can't, we are probably in trouble. We don't care whether we can run the
# executable--we might be using a cross compiler--we only care whether it
# can be created. At this point the main configure script has set CC.
+we_are_ok=no
echo "int main () { return 0; }" > conftest.c
${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
-if [ $? = 0 ] && [ -s conftest -o -s conftest.exe ]; then
- :
-else
- echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
- echo 1>&2 "*** You must set the environment variable CC to a working compiler."
- rm -f conftest*
- exit 1
-fi
+if test $? = 0 ; then
+ if test -s conftest || test -s conftest.exe ; then
+ we_are_ok=yes
+ fi
+fi
+case $we_are_ok in
+ no)
+ echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
+ echo 1>&2 "*** You must set the environment variable CC to a working compiler."
+ rm -f conftest*
+ exit 1
+ ;;
+esac
rm -f conftest*
# The Solaris /usr/ucb/cc compiler does not appear to work.
case "${host}" in
sparc-sun-solaris2*)
CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
- if [ "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ] ; then
+ if test "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ; then
could_use=
- [ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
- if [ -d /opt/cygnus/bin ] ; then
- if [ "$could_use" = "" ] ; then
+ test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
+ if test -d /opt/cygnus/bin ; then
+ if test "$could_use" = "" ; then
could_use="/opt/cygnus/bin"
else
could_use="$could_use or /opt/cygnus/bin"
fi
fi
- if [ "$could_use" = "" ] ; then
+ if test "$could_use" = "" ; then
echo "Warning: compilation may fail because you're using"
echo "/usr/ucb/cc. You should change your PATH or CC "
echo "variable and rerun configure."
# If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
# binutils tools will find libbfd.so.
-if [ "${shared}" = "yes" ]; then
+if test "${shared}" = "yes" ; then
sed -e 's/^SET_LIB_PATH[ ]*=.*$/SET_LIB_PATH = $(REALLY_SET_LIB_PATH)/' \
Makefile > Makefile.tem
rm -f Makefile
esac
fi
-# Record target_configdirs and the configure arguments in Makefile.
-target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
-targargs=`echo "${arguments}" | \
+# Base args. Strip norecursion, cache-file, srcdir, host, build, target.
+# These are the ones we might not want to pass down to subconfigures.
+baseargs=`echo "${arguments}" | \
sed -e 's/--no[^ ]*//' \
-e 's/--cache[a-z-]*=[^ ]*//' \
+ -e 's/--sr[a-z-]*=[^ ]*//' \
-e 's/--ho[a-z-]*=[^ ]*//' \
-e 's/--bu[a-z-]*=[^ ]*//' \
-e 's/--ta[a-z-]*=[^ ]*//'`
+# For the build-side libraries, we just need to pretend we're native,
+# and not use the same cache file. Multilibs are neither needed nor
+# desired.
+buildargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${baseargs}"
+
+# Record target_configdirs and the configure arguments for target and
+# build configuration in Makefile.
+target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
+targargs=${baseargs}
+
# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built
# native. However, it would be better to use other mechanisms to make the
# sorts of decisions they want to make on this basis. Please consider
# this option to be deprecated. FIXME.
-if [ x${is_cross_compiler} = xyes ]; then
+if test x${is_cross_compiler} = xyes ; then
targargs="--with-cross-host=${host_alias} ${targargs}"
fi
# Default to --enable-multilib.
-if [ x${enable_multilib} = x ]; then
+if test x${enable_multilib} = x ; then
targargs="--enable-multilib ${targargs}"
fi
# Pass --with-newlib if appropriate. Note that target_configdirs has
# changed from the earlier setting of with_newlib.
-if [ x${with_newlib} != xno ] && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && [ -d ${srcdir}/newlib ] ; then
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
targargs="--with-newlib ${targargs}"
fi
+# Pass the appropriate --host, --build, and --cache-file arguments.
+targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}"
+
# provide a proper gxx_include_dir.
# Note, if you change the default, make sure to fix both here and in
-# the gcc, libio, and libstdc++ subdirectories.
+# the gcc and libstdc++-v3 subdirectories.
# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
gxx_include_dir=
if test -n "${with_gxx_include_dir}"; then
gxx_include_dir='${libsubdir}/include/g++'
else
. ${topsrcdir}/config.if
- gxx_include_dir='${prefix}/include/g++'-${libstdcxx_interface}
+ gxx_include_dir='${prefix}/include/${libstdcxx_incdir}'
fi
else
gxx_include_dir=${gxx_include_dir}
case " $skipdirs " in
*" target-newlib "*) ;;
*)
+ case " $target_configdirs " in
+ *" newlib "*)
+ case " $targargs " in
+ *" --with-newlib "*)
case "$target" in
*-cygwin*)
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include -isystem $$s/newlib/libc/sys/cygwin -isystem $$s/newlib/libc/sys/cygwin32' ;;
fi
fi
- # If we're building newlib, use its generic headers last, but search
- # for any libc-related directories first (so make it the last -B
- # switch).
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
+ case "${target}-${is_cross_compiler}" in
+ i[3456]86-*-linux*-no)
+ # Here host == target, so we don't need to build gcc,
+ # so we don't want to discard standard headers.
+ FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
+ ;;
+ *)
+ # If we're building newlib, use its generic headers last, but search
+ # for any libc-related directories first (so make it the last -B
+ # switch).
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
+ ;;
+ esac
;;
+ esac
+ ;;
+ esac
+ ;;
esac
# On Canadian crosses, we'll be searching the right directories for
*) CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
esac
-if test "x${CHILL_FOR_TARGET+set}" = xset; then
+if test "x${GCJ_FOR_TARGET+set}" = xset; then
:
elif test -d ${topsrcdir}/gcc; then
- CHILL_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/'
+ GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
elif test "$host" = "$target"; then
- CHILL_FOR_TARGET='$(CC)'
+ GCJ_FOR_TARGET='gcj'
else
- CHILL_FOR_TARGET=`echo gcc | sed -e 's/x/x/' ${program_transform_name}`
+ GCJ_FOR_TARGET=`echo gcj | sed -e 's/x/x/' ${program_transform_name}`
fi
-case $CHILL_FOR_TARGET in
+case $GCJ_FOR_TARGET in
*' $(FLAGS_FOR_TARGET)') ;;
-*) CHILL_FOR_TARGET=$CHILL_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+*) GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
esac
if test "x${CXX_FOR_TARGET+set}" = xset; then
:
elif test -d ${topsrcdir}/gcc; then
- CXX_FOR_TARGET='$$r/gcc/`case $$dir in libstdc++-v3) echo xgcc ;; *) echo g++ ;; esac` -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
+ # We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
+ # of g++ for linking C++ or Java, because g++ has -shared-libgcc by
+ # default whereas gcc does not.
+ CXX_FOR_TARGET='$$r/gcc/`case $$dir in libstdc++-v3 | libjava) echo xgcc -shared-libgcc ;; *) echo g++ ;; esac` -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
elif test "$host" = "$target"; then
CXX_FOR_TARGET='$(CXX)'
else
# macros.
qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
-targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}"
-sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
- -e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
- -e "s%^FLAGS_FOR_TARGET[ ]*=.*$%FLAGS_FOR_TARGET = ${FLAGS_FOR_TARGET}%" \
- -e "s%^CC_FOR_TARGET[ ]*=.*$%CC_FOR_TARGET = ${CC_FOR_TARGET}%" \
- -e "s%^CHILL_FOR_TARGET[ ]*=.*$%CHILL_FOR_TARGET = ${CHILL_FOR_TARGET}%" \
- -e "s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = ${qCXX_FOR_TARGET}%" \
- -e "s%^CXX_FOR_TARGET_FOR_RECURSIVE_MAKE[ ]*=.*$%CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = ${qqCXX_FOR_TARGET}%" \
- -e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
- -e "s%^gxx_include_dir[ ]*=.*$%gxx_include_dir=${gxx_include_dir}%" \
- Makefile > Makefile.tem
-rm -f Makefile
+sedtemp=sed.$$
+cat >$sedtemp <<EOF
+s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:
+s%^TARGET_CONFIGARGS[ ]*=.*$%TARGET_CONFIGARGS = ${targargs}%
+s%^FLAGS_FOR_TARGET[ ]*=.*$%FLAGS_FOR_TARGET = ${FLAGS_FOR_TARGET}%
+s%^CC_FOR_TARGET[ ]*=.*$%CC_FOR_TARGET = ${CC_FOR_TARGET}%
+s%^GCJ_FOR_TARGET[ ]*=.*$%GCJ_FOR_TARGET = ${GCJ_FOR_TARGET}%
+s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = ${qCXX_FOR_TARGET}%
+s%^CXX_FOR_TARGET_FOR_RECURSIVE_MAKE[ ]*=.*$%CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = ${qqCXX_FOR_TARGET}%
+s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%
+s%^BUILD_SUBDIR[ ]*=.*$%BUILD_SUBDIR = ${build_subdir}%
+s%^BUILD_CONFIGARGS[ ]*=.*$%BUILD_CONFIGARGS = ${buildargs}%
+s%^gxx_include_dir[ ]*=.*$%gxx_include_dir=${gxx_include_dir}%
+EOF
+sed -f $sedtemp Makefile > Makefile.tem
+rm -f Makefile $sedtemp
mv -f Makefile.tem Makefile
#