if [ "${enable_libstdcxx_v3}" = "yes" ] && test -d $srcdir/libstdc++-v3; then
libstdcxx_version="target-libstdc++-v3"
# Don't use libstdc++-v3's flags to configure/build itself.
- libstdcxx_flags='`test "x$$dir" != xlibstdc++-v3 && test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/mkcheck && $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/mkcheck 2 $$r/$(TARGET_SUBDIR)/libstdc++-v3 $$s/libstdc++-v3 | sed -e "s/-I/-isystem /g"` -L$$r/$(TARGET_SUBDIR)/libstd++-v3/src -L$$r/$(TARGET_SUBDIR)/libstd++-v3/src/.libs'
+ libstdcxx_flags='`case $$dir in libstdc++-v3) ;; *) cat $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/libstdc++.INC 2>/dev/null || : ;; esac` -L$$r/$(TARGET_SUBDIR)/libstd++-v3/src -L$$r/$(TARGET_SUBDIR)/libstd++-v3/src/.libs'
else
libstdcxx_version="target-libio target-libstdc++"
libstdcxx_flags='-isystem $$s/libstdc++ -isystem $$s/libstdc++/std -isystem $$s/libstdc++/stl -isystem $$s/libio/ -isystem $$s/libio/stdio -L$$r/$(TARGET_SUBDIR)/libstdc++'
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
-host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext zip"
+host_tools="texinfo byacc flex bison binutils ld gas gcc cgen sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext zip"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
i[3456]86-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
;;
- m68k-*-elf*)
+ m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty target-librx target-libg++ target-libstdc++ target-libio target-libf2c target-libchill target-zlib target-libobjc"
+ ;;
+ m68k-*-elf*)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
*target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
esac
+# Only configure cgen if --enable-cgen-maint.
+if [ "x$enable_cgen_maint" != xyes ] ; then
+ noconfigdirs="$noconfigdirs cgen"
+fi
+
# Make sure we don't let GNU ld be added if we didn't want it.
if [ x$with_gnu_ld = xno ]; then
use_gnu_ld=no
i[3456]86-*)
target_makefile_frag="${target_makefile_frag} config/mt-x86pic"
;;
+ ia64-*)
+ target_makefile_frag="${target_makefile_frag} config/mt-ia64pic"
+ ;;
powerpc*-*-aix*)
# We don't want -fPIC on AIX.
;;
fi
FLAGS_FOR_TARGET=
-if test -d ${topsrcdir}/gcc; then
- # Directories specified with -B are searched for libraries after those
- # specified with -L, but for headers (in sub-directory `include')
- # before those specified with -I and -isystem. Fortunately, we don't
- # expect include directories to exist in build_tooldir/{bin,lib} (see
- # below), and we want gcc/include to be searched first.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/gcc/'
-fi
case " $skipdirs " in
*" target-newlib "*) ;;
*)
case "$target" in
- i[3456]86-*-cygwin*)
+ *-cygwin*)
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include -isystem $$s/newlib/libc/sys/cygwin -isystem $$s/newlib/libc/sys/cygwin32' ;;
esac
+ # If we're not building GCC, don't discard standard headers.
+ if test -d ${topsrcdir}/gcc; then
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
+
+ if test "${build}" != "${host}"; then
+ # On Canadian crosses, CC_FOR_TARGET will have already been set
+ # by `configure', so we won't have an opportunity to add -Bgcc/
+ # to it. This is right: we don't want to search that directory
+ # for binaries, but we want the header files in there, so add
+ # them explicitly.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/gcc/include'
+
+ # Someone might think of using the pre-installed headers on
+ # Canadian crosses, in case the installed compiler is not fully
+ # compatible with the compiler being built. In this case, it
+ # would be better to flag an error than risking having
+ # incompatible object files being constructed. We can't
+ # guarantee that an error will be flagged, but let's hope the
+ # compiler will do it, when presented with incompatible header
+ # files.
+ fi
+ fi
+
# If we're building newlib, use its generic headers last, but search
# for any libc-related directories first (so make it the last -B
# switch).
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
;;
esac
-if test -d ${topsrcdir}/gcc; then
+
+# On Canadian crosses, we'll be searching the right directories for
+# the previously-installed cross compiler, so don't bother to add
+# flags for directories within the install tree of the compiler
+# being built; programs in there won't even run.
+if test "${build}" = "${host}" && test -d ${topsrcdir}/gcc; then
# Search for pre-installed headers if nothing else fits.
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include'
fi
+
if test "x${use_gnu_ld}" = x && test "x${with_gnu_ld}" != xno &&
echo " ${configdirs} " | grep " ld " > /dev/null &&
test -d ${srcdir}/ld; then
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
fi
-if test -d ${topsrcdir}/gcc; then
- CC_FOR_TARGET='$$r/gcc/xgcc'
+if test "x${CC_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${topsrcdir}/gcc; then
+ CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
elif test "$host" = "$target"; then
CC_FOR_TARGET='$(CC)'
else
CC_FOR_TARGET=`echo gcc | sed -e 's/x/x/' ${program_transform_name}`
fi
-CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)'
+# On Canadian crosses, configure reads CC_FOR_TARGET from Makefile,
+# if Makefile exists. Prevent $(FLAGS_FOR_TARGET) from being duplicated.
+case $CC_FOR_TARGET in
+*' $(FLAGS_FOR_TARGET)') ;;
+*) CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+esac
-if test -d ${topsrcdir}/gcc &&
- echo ",${enable_languages-${LANGUAGES-CHILL}}," |
- grep ,CHILL, > /dev/null ; then
- CHILL_FOR_TARGET='$$r/gcc/xgcc -L$$r/gcc/ch/runtime/'
+if test "x${CHILL_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${topsrcdir}/gcc; then
+ CHILL_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/'
elif test "$host" = "$target"; then
CHILL_FOR_TARGET='$(CC)'
else
CHILL_FOR_TARGET=`echo gcc | sed -e 's/x/x/' ${program_transform_name}`
fi
-CHILL_FOR_TARGET=$CHILL_FOR_TARGET' $(FLAGS_FOR_TARGET)'
+case $CHILL_FOR_TARGET in
+*' $(FLAGS_FOR_TARGET)') ;;
+*) CHILL_FOR_TARGET=$CHILL_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+esac
-if test -d ${topsrcdir}/gcc &&
- echo ",${enable_languages-${LANGUAGES-c++}}," |
- grep ',c[+][+],' > /dev/null ; then
- CXX_FOR_TARGET='$$r/gcc/g++ -nostdinc++ '$libstdcxx_flags
+if test "x${CXX_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${topsrcdir}/gcc; then
+ CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
elif test "$host" = "$target"; then
CXX_FOR_TARGET='$(CXX)'
else
CXX_FOR_TARGET=`echo c++ | sed -e 's/x/x/' ${program_transform_name}`
fi
-CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
+case $CXX_FOR_TARGET in
+*' $(FLAGS_FOR_TARGET)') ;;
+*) CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+esac
+qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,&,\\\&,g'`
targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}"
sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
-e "s%^FLAGS_FOR_TARGET[ ]*=.*$%FLAGS_FOR_TARGET = ${FLAGS_FOR_TARGET}%" \
-e "s%^CC_FOR_TARGET[ ]*=.*$%CC_FOR_TARGET = ${CC_FOR_TARGET}%" \
-e "s%^CHILL_FOR_TARGET[ ]*=.*$%CHILL_FOR_TARGET = ${CHILL_FOR_TARGET}%" \
- -e "s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = ${CXX_FOR_TARGET}%" \
+ -e "s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = ${qCXX_FOR_TARGET}%" \
-e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
-e "s%^gxx_include_dir[ ]*=.*$%gxx_include_dir=${gxx_include_dir}%" \
Makefile > Makefile.tem
projects / deliverable / binutils-gdb.git / blobdiff