## For more information on these two systems, check out the documentation
## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
-# Copyright (C) 1992-99, 2000 Free Software Foundation, Inc.
+# Copyright (C) 1992-99, 2000, 2001 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
fi
# Set up configure/Makefile variables if libstdc++-v3 is to be built.
-if [ "${enable_libstdcxx_v3}" = "yes" ] ; then
+if [ "${enable_libstdcxx_v3}" = "yes" ] && test -d $srcdir/libstdc++-v3; then
libstdcxx_version="target-libstdc++-v3"
+ # Don't use libstdc++-v3's flags to configure/build itself.
+ libstdcxx_flags='`case $$dir in libstdc++-v3) ;; *) cat $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/libstdc++.INC 2>/dev/null || : ;; esac` -L$$r/$(TARGET_SUBDIR)/libstd++-v3/src -L$$r/$(TARGET_SUBDIR)/libstd++-v3/src/.libs'
else
libstdcxx_version="target-libio target-libstdc++"
+ libstdcxx_flags='-isystem $$s/libstdc++ -isystem $$s/libstdc++/std -isystem $$s/libstdc++/stl -isystem $$s/libio/ -isystem $$s/libio/stdio -L$$r/$(TARGET_SUBDIR)/libstdc++'
fi
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
-host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext zip"
+host_tools="texinfo byacc flex bison binutils ld gas gcc cgen sid sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext zip"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
powerpc*-*-*)
host_makefile_frag="${host_makefile_frag} config/mh-ppcpic"
;;
+ s390-* | s390x-*)
+ host_makefile_frag="${host_makefile_frag} config/mh-s390pic"
+ ;;
*-*-*)
if test -f ${srcdir}/config/mh-${host_cpu}pic; then
host_makefile_frag="${host_makefile_frag} config/mh-${host_cpu}pic"
noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
;;
*-*-cygwin*)
- noconfigdirs="autoconf automake send-pr rcs guile perl texinfo apache inet"
+ noconfigdirs="autoconf automake send-pr rcs guile perl apache inet"
;;
*-*-netbsd*)
noconfigdirs="rcs"
esac
+# Save it here so that, even in case of --enable-libgcj, if the Java
+# front-end isn't enabled, we still get libgcj disabled.
+libgcj_saved=$libgcj
+case $enable_libgcj in
+yes)
+ # If we reset it here, it won't get added to noconfigdirs in the
+ # target-specific build rules, so it will be forcibly enabled
+ # (unless the Java language itself isn't enabled).
+ libgcj=
+ ;;
+no)
+ # Make sure we get it printed in the list of not supported target libs.
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+esac
+
case "${target}" in
*-*-netware)
noconfigdirs="$noconfigdirs ${libstdcxx_version} target-newlib target-libiberty target-libgloss target-libffi"
arm-*-oabi*)
noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
- c4x-*-*)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
- ;;
- c54x*-*-* | tic54x-*-*)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi gcc gdb newlib"
- ;;
thumb-*-coff)
noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
+ xscale-*-elf)
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ if [ x${is_cross_compiler} != xno ] ; then
+ target_configdirs="${target_configdirs} target-bsp target-cygmon"
+ fi
+ ;;
+ xscale-*-coff)
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ if [ x${is_cross_compiler} != xno ] ; then
+ target_configdirs="${target_configdirs} target-bsp target-cygmon"
+ fi
+ ;;
thumb-*-pe)
noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss target-libffi"
;;
+ c4x-*-*)
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
+ ;;
+ c54x*-*-* | tic54x-*-*)
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi gcc gdb newlib"
+ ;;
d10v-*-*)
noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
;;
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
;;
- h8300*-*-* | \
+ h8300*-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
h8500-*-*)
noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
;;
"" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
*) ;;
esac
- noconfigdirs="$noconfigdirs ld shellutils"
+ # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
+ # build on HP-UX 10.20.
+ noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
;;
ia64*-*-elf*)
# No gdb support yet.
;;
i[3456]86-*-mingw32*)
target_configdirs="$target_configdirs target-mingw"
- noconfigdirs="$noconfigdirs expect target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
# Can't build gdb for mingw32 if not native.
case "${host}" in
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
- noconfigdirs="$noconfigdirs target-gperf target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss target-libffi"
;;
i[3456]86-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
- m68k-*-elf*)
+ m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty target-librx target-libg++ target-libstdc++ target-libio target-libf2c target-libchill target-zlib target-libobjc"
+ ;;
+ m68k-*-elf*)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- # The configure and build of ld are currently disabled because
- # GNU ld is known to be broken for AIX 4.2 and 4.3 (at least)
- # The symptom is that GDBtk 4.18 fails at startup with a segfault
- # if linked by GNU ld, but not if linked by the native ld.
- noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss target-libffi ld"
- use_gnu_ld=no
+ use_gnu_ld=yes
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs target-newlib gprof cvssrc target-libffi"
;;
rs6000-*-aix*)
- # The configure and build of ld are currently disabled because
- # GNU ld is known to be broken for AIX 4.2 and 4.3 (at least)
- # The symptom is that GDBtk 4.18 fails at startup with a segfault
- # if linked by GNU ld, but not if linked by the native ld.
- noconfigdirs="$noconfigdirs gprof target-libffi ld"
- use_gnu_ld=no
+ noconfigdirs="$noconfigdirs gprof target-libffi"
+ use_gnu_ld=yes
;;
rs6000-*-*)
noconfigdirs="$noconfigdirs gprof target-libffi"
mips*-*-irix6*)
# The GNU assembler does not support IRIX 6.
# emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
- noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss"
+ # Linking libjava exceeds command-line length limits on at least
+ # IRIX 6.2, but not on IRIX 6.5.
+ # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
+ # <oldham@codesourcery.com>
+ noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss ${libgcj}"
;;
mips*-dec-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
- noconfigdirs="target-libffi"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
sparclite-*-*)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
- noconfigdirs="target-libffi"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
sparc-*-sunos4*)
if [ x${is_cross_compiler} != xno ] ; then
use_gnu_ld=no
fi
;;
+ sparc-*-solaris*)
+ case "${host}" in
+ sparc-*-solaris2.8)
+ # According to Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>, libjava
+ # won't build correctly on Solaris 8 if there's a
+ # previously-installed version of GCC in the configured prefix.
+ # This problem does not show up on earlier versions of Solaris.
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ esac
+ ;;
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld ${libstdcxx_version} opcodes target-libgloss target-libffi"
;;
*-*-mpw*)
# Macs want a resource compiler.
configdirs="$configdirs grez"
- noconfigdirs="target-libffi"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
esac
noconfigdirs="$noconfigdirs gas"
fi
+# Figure out what language subdirectories are present.
+# Look if the user specified --enable-languages="..."; if not, use
+# the environment variable $LANGUAGES if defined. $LANGUAGES might
+# go away some day.
+if test x"${enable_languages+set}" != xset; then
+ if test x"${LANGUAGES+set}" = xset; then
+ enable_languages="`echo ${LANGUAGES} | tr ' ' ','`"
+ else
+ enable_languages=all
+ fi
+else
+ if test x"${enable_languages}" = x; then
+ echo configure.in: --enable-languages needs at least one argument 1>&2
+ exit 1
+ fi
+fi
+subdirs=
+for lang in ${srcdir}/gcc/*/config-lang.in ..
+do
+ case $lang in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in) ;;
+ *)
+ lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
+ this_lang_libs=`sed -n -e 's,^target_libs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^target_libs=\([^ ]*\).*$,\1,p' $lang`
+ build_by_default=`sed -n -e 's,^build_by_default=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^build_by_default=\([^ ]*\).*$,\1,p' $lang`
+ if test "x$lang_alias" = x
+ then
+ echo "$lang doesn't set \$language." 1>&2
+ exit 1
+ fi
+ case ${build_by_default},${enable_languages}, in
+ *,$lang_alias,*) add_this_lang=yes ;;
+ no,*) add_this_lang=no ;;
+ *,all,*) add_this_lang=yes ;;
+ *) add_this_lang=no ;;
+ esac
+ if test x"${add_this_lang}" = xyes; then
+ eval target_libs='"$target_libs "'\"$this_lang_libs\"
+ else
+ eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs\"
+ fi
+ ;;
+ esac
+done
+
+
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
# $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
i[3456]86-*)
target_makefile_frag="${target_makefile_frag} config/mt-x86pic"
;;
+ ia64-*)
+ target_makefile_frag="${target_makefile_frag} config/mt-ia64pic"
+ ;;
powerpc*-*-aix*)
# We don't want -fPIC on AIX.
;;
gxx_include_dir=${gxx_include_dir}
fi
+FLAGS_FOR_TARGET=
+case " $skipdirs " in
+*" target-newlib "*) ;;
+*)
+ case "$target" in
+ *-cygwin*)
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include -isystem $$s/newlib/libc/sys/cygwin -isystem $$s/newlib/libc/sys/cygwin32' ;;
+ esac
+
+ # If we're not building GCC, don't discard standard headers.
+ if test -d ${topsrcdir}/gcc; then
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
+
+ if test "${build}" != "${host}"; then
+ # On Canadian crosses, CC_FOR_TARGET will have already been set
+ # by `configure', so we won't have an opportunity to add -Bgcc/
+ # to it. This is right: we don't want to search that directory
+ # for binaries, but we want the header files in there, so add
+ # them explicitly.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/gcc/include'
+
+ # Someone might think of using the pre-installed headers on
+ # Canadian crosses, in case the installed compiler is not fully
+ # compatible with the compiler being built. In this case, it
+ # would be better to flag an error than risking having
+ # incompatible object files being constructed. We can't
+ # guarantee that an error will be flagged, but let's hope the
+ # compiler will do it, when presented with incompatible header
+ # files.
+ fi
+ fi
+
+ # If we're building newlib, use its generic headers last, but search
+ # for any libc-related directories first (so make it the last -B
+ # switch).
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
+ ;;
+esac
+
+# On Canadian crosses, we'll be searching the right directories for
+# the previously-installed cross compiler, so don't bother to add
+# flags for directories within the install tree of the compiler
+# being built; programs in there won't even run.
+if test "${build}" = "${host}" && test -d ${topsrcdir}/gcc; then
+ # Search for pre-installed headers if nothing else fits.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include'
+fi
+
+if test "x${use_gnu_ld}" = x && test "x${with_gnu_ld}" != xno &&
+ echo " ${configdirs} " | grep " ld " > /dev/null &&
+ test -d ${srcdir}/ld; then
+ # Arrange for us to find uninstalled linker scripts.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
+fi
+
+if test "x${CC_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${topsrcdir}/gcc; then
+ CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
+elif test "$host" = "$target"; then
+ CC_FOR_TARGET='$(CC)'
+else
+ CC_FOR_TARGET=`echo gcc | sed -e 's/x/x/' ${program_transform_name}`
+fi
+# On Canadian crosses, configure reads CC_FOR_TARGET from Makefile,
+# if Makefile exists. Prevent $(FLAGS_FOR_TARGET) from being duplicated.
+case $CC_FOR_TARGET in
+*' $(FLAGS_FOR_TARGET)') ;;
+*) CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+esac
+
+if test "x${CHILL_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${topsrcdir}/gcc; then
+ CHILL_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/'
+elif test "$host" = "$target"; then
+ CHILL_FOR_TARGET='$(CC)'
+else
+ CHILL_FOR_TARGET=`echo gcc | sed -e 's/x/x/' ${program_transform_name}`
+fi
+case $CHILL_FOR_TARGET in
+*' $(FLAGS_FOR_TARGET)') ;;
+*) CHILL_FOR_TARGET=$CHILL_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+esac
+
+if test "x${CXX_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${topsrcdir}/gcc; then
+ CXX_FOR_TARGET='$$r/gcc/`case $$dir in libstdc++-v3) echo xgcc ;; *) echo g++ ;; esac` -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
+elif test "$host" = "$target"; then
+ CXX_FOR_TARGET='$(CXX)'
+else
+ CXX_FOR_TARGET=`echo c++ | sed -e 's/x/x/' ${program_transform_name}`
+fi
+case $CXX_FOR_TARGET in
+*' $(FLAGS_FOR_TARGET)') ;;
+*) CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+esac
+qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
+
+# We want to defer the evaluation of `cmd`s and shell variables in
+# CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
+# bootstrap. We'll enclose CXX_FOR_TARGET_FOR_RECURSIVE_MAKE in single
+# quotes, but we still have to duplicate `$'s so that shell variables
+# can be expanded by the nested make as shell variables, not as make
+# macros.
+qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
+
targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}"
sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
-e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
+ -e "s%^FLAGS_FOR_TARGET[ ]*=.*$%FLAGS_FOR_TARGET = ${FLAGS_FOR_TARGET}%" \
+ -e "s%^CC_FOR_TARGET[ ]*=.*$%CC_FOR_TARGET = ${CC_FOR_TARGET}%" \
+ -e "s%^CHILL_FOR_TARGET[ ]*=.*$%CHILL_FOR_TARGET = ${CHILL_FOR_TARGET}%" \
+ -e "s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = ${qCXX_FOR_TARGET}%" \
+ -e "s%^CXX_FOR_TARGET_FOR_RECURSIVE_MAKE[ ]*=.*$%CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = ${qqCXX_FOR_TARGET}%" \
-e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
-e "s%^gxx_include_dir[ ]*=.*$%gxx_include_dir=${gxx_include_dir}%" \
Makefile > Makefile.tem