* configure.in (noconfigdirs) [hppa*-*-*, mips*-*-irix6*,

[deliverable/binutils-gdb.git] / configure.in

diff --git a/configure.in b/configure.in
index 6fc1a9ec536c3a507b2d1bf2cf730ddcd48a39e1..6c4591c3b6dd5f595b2a098de8ae90d8f14e5f89 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -14,7 +14,7 @@
 ## For more information on these two systems, check out the documentation
 ## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).  
 
-#   Copyright (C) 1992-99, 2000 Free Software Foundation, Inc.
+#   Copyright (C) 1992-99, 2000, 2001 Free Software Foundation, Inc.
 #
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -558,7 +558,7 @@ case "${host}" in
      noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
      ;;
   *-*-cygwin*)
-     noconfigdirs="autoconf automake send-pr rcs guile perl texinfo apache inet"
+     noconfigdirs="autoconf automake send-pr rcs guile perl apache inet"
     ;;
   *-*-netbsd*)
     noconfigdirs="rcs"
@@ -572,6 +572,22 @@ case "${host}" in
 esac
 
 
+# Save it here so that, even in case of --enable-libgcj, if the Java
+# front-end isn't enabled, we still get libgcj disabled.
+libgcj_saved=$libgcj
+case $enable_libgcj in
+yes)
+  # If we reset it here, it won't get added to noconfigdirs in the
+  # target-specific build rules, so it will be forcibly enabled
+  # (unless the Java language itself isn't enabled).
+  libgcj=
+  ;;
+no)
+  # Make sure we get it printed in the list of not supported target libs.
+  noconfigdirs="$noconfigdirs ${libgcj}"
+  ;;
+esac
+
 case "${target}" in
   *-*-netware)
     noconfigdirs="$noconfigdirs ${libstdcxx_version} target-newlib target-libiberty target-libgloss target-libffi"
@@ -704,7 +720,9 @@ case "${target}" in
        "" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
         *) ;;
     esac
-    noconfigdirs="$noconfigdirs ld shellutils"
+    # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
+    # build on HP-UX 10.20.
+    noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
     ;;
   ia64*-*-elf*)
     # No gdb support yet.
@@ -847,7 +865,11 @@ case "${target}" in
   mips*-*-irix6*)
     # The GNU assembler does not support IRIX 6.
     # emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
-    noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss"
+    # Linking libjava exceeds command-line length limits on at least
+    # IRIX 6.2, but not on IRIX 6.5.
+    # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
+    # <oldham@codesourcery.com>
+    noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss ${libgcj}"
     ;;
   mips*-dec-bsd*)
     noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi"
@@ -898,6 +920,17 @@ case "${target}" in
            use_gnu_ld=no
     fi
     ;;
+  sparc-*-solaris*)
+    case "${host}" in
+    sparc-*-solaris2.8)
+      # According to Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>, libjava
+      # won't build correctly on Solaris 8 if there's a
+      # previously-installed version of GCC in the configured prefix.
+      # This problem does not show up on earlier versions of Solaris.
+      noconfigdirs="$noconfigdirs ${libgcj}"
+      ;;
+    esac
+    ;;
   v810-*-*)
     noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld ${libstdcxx_version} opcodes target-libgloss target-libffi"
     ;;
@@ -1374,7 +1407,7 @@ esac
 if test "x${CXX_FOR_TARGET+set}" = xset; then
   :
 elif test -d ${topsrcdir}/gcc; then
-  CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
+  CXX_FOR_TARGET='$$r/gcc/`case $$dir in libstdc++-v3) echo xgcc ;; *) echo g++ ;; esac` -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
 elif test "$host" = "$target"; then
   CXX_FOR_TARGET='$(CXX)'
 else
@@ -1384,7 +1417,15 @@ case $CXX_FOR_TARGET in
 *' $(FLAGS_FOR_TARGET)') ;;
 *) CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
 esac
-qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,&,\\\&,g'`
+qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
+
+# We want to defer the evaluation of `cmd`s and shell variables in
+# CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
+# bootstrap.  We'll enclose CXX_FOR_TARGET_FOR_RECURSIVE_MAKE in single
+# quotes, but we still have to duplicate `$'s so that shell variables
+# can be expanded by the nested make as shell variables, not as make
+# macros.
+qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
 
 targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}"
 sed -e "s:^TARGET_CONFIGDIRS[  ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
@@ -1393,6 +1434,7 @@ sed -e "s:^TARGET_CONFIGDIRS[     ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:"
     -e "s%^CC_FOR_TARGET[      ]*=.*$%CC_FOR_TARGET = ${CC_FOR_TARGET}%" \
     -e "s%^CHILL_FOR_TARGET[   ]*=.*$%CHILL_FOR_TARGET = ${CHILL_FOR_TARGET}%" \
     -e "s%^CXX_FOR_TARGET[     ]*=.*$%CXX_FOR_TARGET = ${qCXX_FOR_TARGET}%" \
+    -e "s%^CXX_FOR_TARGET_FOR_RECURSIVE_MAKE[  ]*=.*$%CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = ${qqCXX_FOR_TARGET}%" \
     -e "s%^TARGET_SUBDIR[      ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
     -e "s%^gxx_include_dir[    ]*=.*$%gxx_include_dir=${gxx_include_dir}%" \
        Makefile > Makefile.tem