fi
fi
+build_subdir=${build_alias}
+
+if [ x"${build_alias}" != x"${host}" ] ; then
+ if [ ! -d ${build_subdir} ] ; then
+ if mkdir ${build_subdir} ; then true
+ else
+ echo "'*** could not make ${PWD=`pwd`}/${build_subdir}" 1>&2
+ exit 1
+ fi
+ fi
+fi
+
copy_dirs=
# Handle --with-headers=XXX. The contents of the named directory are
esac
case "${target}" in
+ *-*-netbsd*)
+ # Skip some stuff on all NetBSD configurations.
+ skipdirs="$skipdirs target-newlib target-libiberty target-libgloss"
+
+ # Skip some stuff that's unsupported on some NetBSD configurations.
+ case "${target}" in
+ *)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ esac
+ ;;
*-*-netware)
noconfigdirs="$noconfigdirs ${libstdcxx_version} target-newlib target-libiberty target-libgloss target-libffi"
;;
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
- arm-*-coff*)
- noconfigdirs="$noconfigdirs target-libgloss"
- if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
- ;;
- arm-*-elf*)
- noconfigdirs="$noconfigdirs target-libgloss"
- if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
- ;;
arm-*-oabi*)
noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
strongarm-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
strongarm-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
xscale-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
xscale-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
# No gdb support yet.
noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
;;
+ ia64*-**-hpux*)
+ # No gdb or ld support yet.
+ noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb ld"
+ ;;
i[3456]86-*-coff | i[3456]86-*-elf)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
# Look if the user specified --enable-languages="..."; if not, use
# the environment variable $LANGUAGES if defined. $LANGUAGES might
# go away some day.
+# NB: embedded tabs in this IF block -- do not untabify
if test x"${enable_languages+set}" != xset; then
if test x"${LANGUAGES+set}" = xset; then
- enable_languages="`echo ${LANGUAGES} | tr ' ' ','`"
+ enable_languages="${LANGUAGES}"
+ echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
else
enable_languages=all
fi
else
- if test x"${enable_languages}" = x; then
- echo configure.in: --enable-languages needs at least one argument 1>&2
+ if test x"${enable_languages}" = x ||
+ test x"${enable_languages}" = xyes;
+ then
+ echo configure.in: --enable-languages needs at least one language argument 1>&2
exit 1
fi
fi
+enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
+
subdirs=
for lang in ${srcdir}/gcc/*/config-lang.in ..
do
case "${host}" in
sparc-sun-solaris2*)
CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
- if [ "`/usr/bin/which $CCBASE`" = "/usr/ucb/cc" ] ; then
+ if [ "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ] ; then
could_use=
[ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
if [ -d /opt/cygnus/bin ] ; then
esac
fi
-# Record target_configdirs and the configure arguments in Makefile.
+# Record target_configdirs and the configure arguments for target and
+# build configuration in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
targargs=`echo "${arguments}" | \
sed -e 's/--no[^ ]*//' \
-e 's/--bu[a-z-]*=[^ ]*//' \
-e 's/--ta[a-z-]*=[^ ]*//'`
+# For the build-side libraries, we just need to pretend we're native,
+# and not use the same cache file. Multilibs are neither needed nor
+# desired.
+buildargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${targargs}"
+
# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built
# native. However, it would be better to use other mechanisms to make the
targargs="--with-newlib ${targargs}"
fi
+# Pass the appropriate --host, --build, and --cache-file arguments.
+targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}"
+
# provide a proper gxx_include_dir.
# Note, if you change the default, make sure to fix both here and in
# the gcc, libio, and libstdc++ subdirectories.
fi
fi
- # If we're building newlib, use its generic headers last, but search
- # for any libc-related directories first (so make it the last -B
- # switch).
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
+ case "${target}-${is_cross_compiler}" in
+ i[3456]86-pc-linux*-no)
+ # Here host == target, so we don't need to build gcc,
+ # so we don't want to discard standard headers.
+ FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/'
+ ;;
+ *)
+ # If we're building newlib, use its generic headers last, but search
+ # for any libc-related directories first (so make it the last -B
+ # switch).
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
+ ;;
+ esac
;;
esac
# macros.
qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
-targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}"
sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
- -e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
+ -e "s%^TARGET_CONFIGARGS[ ]*=.*$%TARGET_CONFIGARGS = ${targargs}%" \
-e "s%^FLAGS_FOR_TARGET[ ]*=.*$%FLAGS_FOR_TARGET = ${FLAGS_FOR_TARGET}%" \
-e "s%^CC_FOR_TARGET[ ]*=.*$%CC_FOR_TARGET = ${CC_FOR_TARGET}%" \
-e "s%^CHILL_FOR_TARGET[ ]*=.*$%CHILL_FOR_TARGET = ${CHILL_FOR_TARGET}%" \
-e "s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = ${qCXX_FOR_TARGET}%" \
-e "s%^CXX_FOR_TARGET_FOR_RECURSIVE_MAKE[ ]*=.*$%CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = ${qqCXX_FOR_TARGET}%" \
-e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
+ -e "s%^BUILD_SUBDIR[ ]*=.*$%BUILD_SUBDIR = ${build_subdir}%" \
+ -e "s%^BUILD_CONFIGARGS[ ]*=.*$%BUILD_CONFIGARGS = ${buildargs}%" \
-e "s%^gxx_include_dir[ ]*=.*$%gxx_include_dir=${gxx_include_dir}%" \
Makefile > Makefile.tem
rm -f Makefile
projects / deliverable / binutils-gdb.git / blobdiff