# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
-host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu bash m4 autoconf automake ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils sn"
+host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu bash m4 autoconf automake ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils sn libtool"
# start-sanitize-ide
host_tools="${host_tools} ilu vmake jstools"
# end-sanitize-ide
#
# This must be a single line because of the way it is searched by grep in
# the code below.
-native_only="autoconf automake cvssrc emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms sn gnuserv target-gperf"
+native_only="autoconf automake cvssrc emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms sn gnuserv target-gperf libtool"
# directories to be built in a cross environment only
#
# Work in distributions that contain no compiler tools, like Autoconf.
if [ -d ${srcdir}/config ]; then
case "${host}" in
- m68k-hp-hpux*) host_makefile_frag=config/mh-hp300 ;;
- m68k-apollo-sysv*) host_makefile_frag=config/mh-apollo68 ;;
- m68k-apollo-bsd*) host_makefile_frag=config/mh-a68bsd ;;
- m88k-dg-dgux*) host_makefile_frag=config/mh-dgux ;;
- m88k-harris-cxux*) host_makefile_frag=config/mh-cxux ;;
- m88k-motorola-sysv*) host_makefile_frag=config/mh-delta88;;
- mips*-dec-ultrix*) host_makefile_frag=config/mh-decstation ;;
- mips*-nec-sysv4*) host_makefile_frag=config/mh-necv4 ;;
- mips*-sgi-irix6*) host_makefile_frag=config/mh-irix6 ;;
- mips*-sgi-irix5*) host_makefile_frag=config/mh-irix5 ;;
- mips*-sgi-irix4*) host_makefile_frag=config/mh-irix4 ;;
- mips*-sgi-irix3*) host_makefile_frag=config/mh-sysv ;;
- mips*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
- mips*-*-sysv*) host_makefile_frag=config/mh-riscos ;;
- i[3456]86-*-dgux*) host_makefile_frag=config/mh-dgux386 ;;
- i[3456]86-ncr-sysv4.3) host_makefile_frag=config/mh-ncrsvr43 ;;
- i[3456]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
- i[3456]86-*-sco3.2v5*) host_makefile_frag=config/mh-sysv ;;
- i[3456]86-*-sco*) host_makefile_frag=config/mh-sco ;;
- i[3456]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
- i[3456]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
- i[3456]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
- i[3456]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
- i[3456]86-*-msdosdjgpp*) host_makefile_frag=config/mh-go32 ;;
- *-cygwin32*) host_makefile_frag=config/mh-cygwin32 ;;
- *-windows*) host_makefile_frag=config/mh-windows ;;
- vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
- *-*-solaris2*) host_makefile_frag=config/mh-solaris ;;
- m68k-sun-sunos*) host_makefile_frag=config/mh-sun3 ;;
- *-hp-hpux[78]*) host_makefile_frag=config/mh-hpux8 ;;
- *-hp-hpux*) host_makefile_frag=config/mh-hpux ;;
- *-*-hiux*) host_makefile_frag=config/mh-hpux ;;
- rs6000-*-lynxos*) host_makefile_frag=config/mh-lynxrs6k ;;
- *-*-lynxos*) host_makefile_frag=config/mh-lynxos ;;
- *-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
- *-*-sysv*) host_makefile_frag=config/mh-sysv ;;
+ m68k-hp-hpux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-hp300"
+ ;;
+ m68k-apollo-sysv*)
+ host_makefile_frag="${host_makefile_frag} config/mh-apollo68"
+ ;;
+ m68k-apollo-bsd*)
+ host_makefile_frag="${host_makefile_frag} config/mh-a68bsd"
+ ;;
+ m88k-dg-dgux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-dgux"
+ ;;
+ m88k-harris-cxux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-cxux"
+ ;;
+ m88k-motorola-sysv*)
+ host_makefile_frag="${host_makefile_frag} config/mh-delta88"
+ ;;
+ mips*-dec-ultrix*)
+ host_makefile_frag="${host_makefile_frag} config/mh-decstation"
+ ;;
+ mips*-nec-sysv4*)
+ host_makefile_frag="${host_makefile_frag} config/mh-necv4"
+ ;;
+ mips*-sgi-irix6*)
+ host_makefile_frag="${host_makefile_frag} config/mh-irix6"
+ ;;
+ mips*-sgi-irix5*)
+ host_makefile_frag="${host_makefile_frag} config/mh-irix5"
+ ;;
+ mips*-sgi-irix4*)
+ host_makefile_frag="${host_makefile_frag} config/mh-irix4"
+ ;;
+ mips*-sgi-irix3*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ ;;
+ mips*-*-sysv4*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
+ ;;
+ mips*-*-sysv*)
+ host_makefile_frag="${host_makefile_frag} config/mh-riscos"
+ ;;
+ i[3456]86-*-dgux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-dgux386"
+ ;;
+ i[3456]86-ncr-sysv4.3*)
+ host_makefile_frag="${host_makefile_frag} config/mh-ncrsvr43"
+ ;;
+ i[3456]86-ncr-sysv4*)
+ host_makefile_frag="${host_makefile_frag} config/mh-ncr3000"
+ ;;
+ i[3456]86-*-sco3.2v5*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ ;;
+ i[3456]86-*-sco*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sco"
+ ;;
+ i[3456]86-*-isc*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ ;;
+ i[3456]86-*-solaris2*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
+ ;;
+ i[3456]86-*-aix*)
+ host_makefile_frag="${host_makefile_frag} config/mh-aix386"
+ ;;
+ i[3456]86-*-go32*)
+ host_makefile_frag="${host_makefile_frag} config/mh-go32"
+ ;;
+ i[3456]86-*-msdosdjgpp*)
+ host_makefile_frag="${host_makefile_frag} config/mh-go32"
+ ;;
+ *-cygwin32*)
+ host_makefile_frag="${host_makefile_frag} config/mh-cygwin32"
+ ;;
+ *-mingw32*)
+ host_makefile_frag="${host_makefile_frag} config/mh-mingw32"
+ ;;
+# start-sanitize-mswin
+ *-windows*)
+ host_makefile_frag="${host_makefile_frag} config/mh-windows"
+ ;;
+# end-sanitize-mswin
+ vax-*-ultrix2*)
+ host_makefile_frag="${host_makefile_frag} config/mh-vaxult2"
+ ;;
+ *-*-solaris2*)
+ host_makefile_frag="${host_makefile_frag} config/mh-solaris"
+ ;;
+ m68k-sun-sunos*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sun3"
+ ;;
+ *-hp-hpux[78]*)
+ host_makefile_frag="${host_makefile_frag} config/mh-hpux8"
+ ;;
+ *-hp-hpux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-hpux"
+ ;;
+ *-*-hiux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-hpux"
+ ;;
+ rs6000-*-lynxos*)
+ host_makefile_frag="${host_makefile_frag} config/mh-lynxrs6k"
+ ;;
+ *-*-lynxos*)
+ host_makefile_frag="${host_makefile_frag} config/mh-lynxos"
+ ;;
+ *-*-sysv4*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
+ ;;
+ *-*-sysv*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ ;;
esac
fi
esac
if [ x${shared} = xyes ]; then
- waugh=
case "${host}" in
- hppa*) waugh=config/mh-papic ;;
- i[3456]86-*) waugh=config/mh-x86pic ;;
- sparc64-*) waugh=config/mh-sparcpic ;;
- powerpc*-*) waugh=config/mh-ppcpic ;;
- *) waugh=config/mh-${host_cpu}pic ;;
+ hppa*)
+ host_makefile_frag="${host_makefile_frag} config/mh-papic"
+ ;;
+ i[3456]86-*)
+ host_makefile_frag="${host_makefile_frag} config/mh-x86pic"
+ ;;
+ sparc64-*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sparcpic"
+ ;;
+ powerpc*-*)
+ host_makefile_frag="${host_makefile_frag} config/mh-ppcpic"
+ ;;
+ alpha-*-linux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-elfalphapic"
+ ;;
+ *)
+ if test -f ${srcdir}/config/mh-${host_cpu}pic; then
+ host_makefile_frag="${host_makefile_frag} config/mh-${host_cpu}pic"
+ fi
+ ;;
esac
- if [ -f ${srcdir}/${waugh} ]; then
- if [ -n "${host_makefile_frag}" ] ; then
- cat ${srcdir}/${host_makefile_frag} > mh-frag
- cat ${srcdir}/${waugh} >> mh-frag
- host_makefile_frag=mh-frag
- else
- host_makefile_frag=${waugh}
- fi
- fi
+fi
+
+rm -f mh-frag
+if [ -n "${host_makefile_frag}" ] ; then
+ for f in ${host_makefile_frag}
+ do
+ cat ${srcdir}/$f >> mh-frag
+ done
+ host_makefile_frag=mh-frag
fi
# per-target:
case "${target}" in
- v810*) target_makefile_frag=config/mt-v810 ;;
- i[3456]86-*-netware*) target_makefile_frag=config/mt-netware ;;
+ v810*)
+ target_makefile_frag="${target_makefile_frag} config/mt-v810"
+ ;;
+ i[3456]86-*-netware*)
+ target_makefile_frag="${target_makefile_frag} config/mt-netware"
+ ;;
+ powerpc-*-netware*)
+ target_makefile_frag="${target_makefile_frag} config/mt-netware"
+ ;;
# start-sanitize-r5900
- mips64r5900*-*-*) target_makefile_frag=config/mt-r5900 ;;
+ mips64r59*)
+ target_makefile_frag="${target_makefile_frag} config/mt-r5900"
+ ;;
# end-sanitize-r5900
- powerpc-*-netware*) target_makefile_frag=config/mt-netware ;;
- *-*-linux-gnu) target_makefile_frag=config/mt-linux ;;
+ *-*-linux-gnu)
+ target_makefile_frag="${target_makefile_frag} config/mt-linux"
+ ;;
esac
skipdirs=
case "${host}" in
i[3456]86-*-go32*)
configdirs="$configdirs dosrel" ;;
+ i[3456]86-*-mingw32*)
+ configdirs="$configdirs dosrel" ;;
*-cygwin32*)
configdirs="$configdirs dosrel" ;;
esac
noconfigdirs="$noconfigdirs libide vmake jstools"
# end-sanitize-ide
;;
+ i[3456]86-*-mingw32*)
+ # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db sn gnuserv"
+ noconfigdirs="expect dejagnu cvs autoconf automake send-pr gprof rcs guile perl texinfo apache inet libtool"
+ ;;
*-*-cygwin32)
- noconfigdirs="expect dejagnu cvssrc autoconf automake send-pr gprof rcs guile perl texinfo apache inet"
+ noconfigdirs="autoconf automake send-pr gprof rcs guile perl texinfo apache inet"
;;
*-*-windows*)
# This is only used to build WinGDB...
configdirs="bfd libiberty opcodes readline sim gdb"
target_configdirs=
;;
+ *-*-netbsd*)
+ noconfigdirs="rcs"
+ ;;
ppc*-*-pe)
noconfigdirs="patch diff make tk tcl expect dejagnu cvssrc autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl tix db sn gnuserv"
# start-sanitize-ide
alpha*-*-*vms*)
noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss"
;;
+ alpha-*-linux*)
+ # newlib is not 64 bit ready
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ # linux has rx in libc
+ skipdirs="$skipdirs target-librx"
+ ;;
alpha*-*-*)
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
# but don't build gdb
noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
;;
- *-*-cygwin32)
- target_configdirs="$target_configdirs target-winsup"
+ i[3456]86-*-mingw32*)
+ target_configdirs="$target_configdirs target-mingw"
noconfigdirs="$noconfigdirs expect target-libgloss"
+
+ # Can't build gdb for mingw32 if not native.
+ case "${host}" in
+ i[3456]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db sn gnuserv"
+ ;;
+ esac
+ ;;
+ *-*-cygwin32*)
+ target_configdirs="$target_configdirs target-winsup"
+ noconfigdirs="$noconfigdirs target-gperf target-libgloss"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
# Can't build gdb for cygwin32 if not native.
case "${host}" in
- *-*-cygwin32) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db sn gnuserv"
+ *-*-cygwin32*) ;; # keep gdb tcl tk expect etc.
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui db sn gnuserv"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide vmake jstools"
# end-sanitize-ide
noconfigdirs="$noconfigdirs target-libgloss"
;;
mn10300-*-*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs"
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
target_configdirs="${target_configdirs} target-cygmon"
fi
;;
+ sparc64-*-elf*)
+ if [ x${is_cross_compiler} != xno ] ; then
+ target_configdirs="${target_configdirs} target-cygmon"
+ fi
+ ;;
sparclite-*-aout*)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-cygmon"
use_gnu_ld=no
fi
;;
+# start-sanitize-sky
+ dvp-*-elf*)
+ noconfigdirs="$noconfigdirs gcc gdb sim"
+ noconfigdirs="$noconfigdirs itcl libgui tk tix"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty"
+ noconfigdirs="$noconfigdirs target-librx target-libg++ target-libstdc++ target-libio"
+ ;;
+# end-sanitize-sky
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libio target-libg++ target-libstdc++ opcodes target-libgloss"
;;
*target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
esac
-# If we are building a Canadian Cross, discard tools that can not be built
-# using a cross compiler. FIXME: These tools should be fixed.
-if [ "${build}" != "${host}" ]; then
- noconfigdirs="$noconfigdirs expect dejagnu"
-fi
-
# Make sure we don't let GNU ld be added if we didn't want it.
if [ x$with_gnu_ld = xno ]; then
use_gnu_ld=no
if [ x${shared} = xyes ]; then
case "${target}" in
- hppa*) target_makefile_frag=config/mt-papic ;;
- i[3456]86-*) target_makefile_frag=config/mt-x86pic ;;
- powerpc*-*) target_makefile_frag=config/mt-ppcpic ;;
- *) target_makefile_frag=config/mt-${target_cpu}pic ;;
+ hppa*)
+ target_makefile_frag="${target_makefile_frag} config/mt-papic"
+ ;;
+ i[3456]86-*)
+ target_makefile_frag="${target_makefile_frag} config/mt-x86pic"
+ ;;
+ powerpc*-*)
+ target_makefile_frag="${target_makefile_frag} config/mt-ppcpic"
+ ;;
+ alpha-*-linux*)
+ target_makefile_frag="${target_makefile_frag} config/mt-elfalphapic"
+ ;;
+ *)
+ if test -f ${srcdir}/config/mt-${target_cpu}pic; then
+ target_makefile_frag="${target_makefile_frag} config/mt-${target_cpu}pic"
+ fi
+ ;;
esac
fi
+rm -f mt-frag
+if [ -n "${target_makefile_frag}" ] ; then
+ for f in ${target_makefile_frag}
+ do
+ cat ${srcdir}/$f >> mt-frag
+ done
+ target_makefile_frag=mt-frag
+fi
+
# post-target:
# Make sure that the compiler is able to generate an executable. If it
case "${host}" in
*-*-hpux*)
- sed -e 's/RPATH_ENVVAR[ ]*=.*$/RPATH_ENVVAR = SHLIB_PATH/' \
+ sed -e 's/^RPATH_ENVVAR[ ]*=.*$/RPATH_ENVVAR = SHLIB_PATH/' \
Makefile > Makefile.tem
rm -f Makefile
mv -f Makefile.tem Makefile
esac
fi
-# If we are building for a cygwin32 host, then set INSTALL_PROGRAM_ARGS to
+# If we are building for a win32 host, then set INSTALL_PROGRAM_ARGS to
# -x. This will cause programs to be installed with .exe extensions.
case "${host}" in
-*-*-cygwin32*)
+*-*-cygwin32* | i[3456]86-*-mingw32)
sed -e 's/^INSTALL_PROGRAM_ARGS[ ]*=.*$/INSTALL_PROGRAM_ARGS = -x/' \
Makefile > Makefile.tem
rm -f Makefile
projects / deliverable / binutils-gdb.git / blobdiff