* cgen-asm.c: Include symcat.h.
[deliverable/binutils-gdb.git] / configure.in
index 40ade81e17796b98b134085ed4f31d83b2e15fac..cb894f6a2f3356378f9c012352931bc596d8d1ff 100644 (file)
@@ -53,7 +53,7 @@ fi
 # these tools are built for the host environment
 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
 # know that we are building the simulator.
-host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu bash m4 autoconf automake ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils sn"
+host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu bash m4 autoconf automake ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils sn libtool"
 # start-sanitize-ide
 host_tools="${host_tools} ilu vmake jstools"
 # end-sanitize-ide
@@ -85,7 +85,7 @@ target_tools="target-examples target-groff target-gperf"
 #
 # This must be a single line because of the way it is searched by grep in
 # the code below.
-native_only="autoconf automake cvssrc emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms sn gnuserv target-gperf"
+native_only="autoconf automake cvssrc emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms sn gnuserv target-gperf libtool"
 
 # directories to be built in a cross environment only
 #
@@ -188,9 +188,14 @@ case "${host}" in
   *-cygwin32*)
     host_makefile_frag="${host_makefile_frag} config/mh-cygwin32"
     ;;
+  *-mingw32*)
+    host_makefile_frag="${host_makefile_frag} config/mh-mingw32"
+    ;;
+# start-sanitize-mswin
   *-windows*)
     host_makefile_frag="${host_makefile_frag} config/mh-windows"
     ;;
+# end-sanitize-mswin
   vax-*-ultrix2*)
     host_makefile_frag="${host_makefile_frag} config/mh-vaxult2"
     ;;
@@ -281,7 +286,9 @@ if [ x${shared} = xyes ]; then
       host_makefile_frag="${host_makefile_frag} config/mh-elfalphapic"
       ;;
     *)
-      host_makefile_frag="${host_makefile_frag} config/mh-${host_cpu}pic"
+      if test -f ${srcdir}/config/mh-${host_cpu}pic; then
+        host_makefile_frag="${host_makefile_frag} config/mh-${host_cpu}pic"
+      fi
       ;;
   esac
 fi
@@ -470,6 +477,8 @@ done
 case "${host}" in
        i[3456]86-*-go32*)
          configdirs="$configdirs dosrel" ;;
+       i[3456]86-*-mingw32*)
+         configdirs="$configdirs dosrel" ;;
        *-cygwin32*)
          configdirs="$configdirs dosrel" ;;
 esac
@@ -493,8 +502,12 @@ case "${host}" in
     noconfigdirs="$noconfigdirs libide vmake jstools"
 # end-sanitize-ide
        ;;
+  i[3456]86-*-mingw32*)
+    # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db sn gnuserv"
+     noconfigdirs="expect dejagnu cvs autoconf automake send-pr gprof rcs guile perl texinfo apache inet libtool"
+       ;;
   *-*-cygwin32)
-     noconfigdirs="expect dejagnu cvssrc autoconf automake send-pr gprof rcs guile perl texinfo apache inet"
+     noconfigdirs="autoconf automake send-pr gprof rcs guile perl texinfo apache inet"
     ;;
   *-*-windows*)
 # This is only used to build WinGDB...
@@ -587,16 +600,27 @@ case "${target}" in
     # but don't build gdb
     noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
     ;;
-  *-*-cygwin32)
-    target_configdirs="$target_configdirs target-winsup"
+  i[3456]86-*-mingw32*)
+    target_configdirs="$target_configdirs target-mingw"
     noconfigdirs="$noconfigdirs expect target-libgloss"
+
+    # Can't build gdb for mingw32 if not native.
+    case "${host}" in
+      i[3456]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
+      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db sn gnuserv"
+         ;;
+    esac
+    ;;    
+  *-*-cygwin32*)
+    target_configdirs="$target_configdirs target-winsup"
+    noconfigdirs="$noconfigdirs target-gperf target-libgloss"
     # always build newlib.
     skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
 
     # Can't build gdb for cygwin32 if not native.
     case "${host}" in
-      *-*-cygwin32) ;; # keep gdb tcl tk expect etc.
-      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db sn gnuserv"
+      *-*-cygwin32*) ;; # keep gdb tcl tk expect etc.
+      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui db sn gnuserv"
 # start-sanitize-ide
          noconfigdirs="$noconfigdirs libide vmake jstools"
 # end-sanitize-ide
@@ -633,7 +657,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   mn10300-*-*)
-    noconfigdirs="$noconfigdirs target-libgloss"
+    noconfigdirs="$noconfigdirs"
     ;;
   powerpc-*-aix*)
     # copied from rs6000-*-* entry
@@ -709,6 +733,11 @@ case "${target}" in
           target_configdirs="${target_configdirs} target-cygmon"
     fi
     ;;
+  sparc64-*-elf*)
+    if [ x${is_cross_compiler} != xno ] ; then
+          target_configdirs="${target_configdirs} target-cygmon"
+    fi
+    ;;
   sparclite-*-aout*)
     if [ x${is_cross_compiler} != xno ] ; then
           target_configdirs="${target_configdirs} target-cygmon"
@@ -722,8 +751,9 @@ case "${target}" in
     fi
     ;;
 # start-sanitize-sky
-  txvu-*-elf*)
-    noconfigdirs="$noconfigdirs gcc gdb"
+  dvp-*-elf*)
+    noconfigdirs="$noconfigdirs gcc gdb sim"
+    noconfigdirs="$noconfigdirs itcl libgui tk tix"
     noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty"
     noconfigdirs="$noconfigdirs target-librx target-libg++ target-libstdc++ target-libio"
     ;;
@@ -766,12 +796,6 @@ case "${noconfigdirs}" in
   *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
 esac
 
-# If we are building a Canadian Cross, discard tools that can not be built
-# using a cross compiler.  FIXME: These tools should be fixed.
-if [ "${build}" != "${host}" ]; then
-  noconfigdirs="$noconfigdirs expect dejagnu"
-fi
-
 # Make sure we don't let GNU ld be added if we didn't want it.
 if [ x$with_gnu_ld = xno ]; then
   use_gnu_ld=no
@@ -931,7 +955,9 @@ if [ x${shared} = xyes ]; then
       target_makefile_frag="${target_makefile_frag} config/mt-elfalphapic"
       ;;
     *)
-      target_makefile_frag="${target_makefile_frag} config/mt-${target_cpu}pic"
+      if test -f ${srcdir}/config/mt-${target_cpu}pic; then
+        target_makefile_frag="${target_makefile_frag} config/mt-${target_cpu}pic"
+      fi
       ;;
   esac
 fi
@@ -1001,7 +1027,7 @@ if [ "${shared}" = "yes" ]; then
 
   case "${host}" in
   *-*-hpux*)
-    sed -e 's/RPATH_ENVVAR[    ]*=.*$/RPATH_ENVVAR = SHLIB_PATH/' \
+    sed -e 's/^RPATH_ENVVAR[   ]*=.*$/RPATH_ENVVAR = SHLIB_PATH/' \
        Makefile > Makefile.tem
     rm -f Makefile
     mv -f Makefile.tem Makefile
@@ -1009,10 +1035,10 @@ if [ "${shared}" = "yes" ]; then
   esac
 fi
 
-# If we are building for a cygwin32 host, then set INSTALL_PROGRAM_ARGS to
+# If we are building for a win32 host, then set INSTALL_PROGRAM_ARGS to
 # -x.  This will cause programs to be installed with .exe extensions.
 case "${host}" in
-*-*-cygwin32*)
+*-*-cygwin32* | i[3456]86-*-mingw32)
     sed -e 's/^INSTALL_PROGRAM_ARGS[   ]*=.*$/INSTALL_PROGRAM_ARGS = -x/' \
        Makefile > Makefile.tem
     rm -f Makefile
This page took 0.026278 seconds and 4 git commands to generate.