+#! /bin/bash
##############################################################################
## This file is a shell script fragment that supplies the information
## For more information on these two systems, check out the documentation
## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
+# Copyright (C) 1992, 93, 94, 95, 1996 Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
##############################################################################
### To add a new directory to the tree, first choose whether it is a target
# these libraries are used by various programs built for the host environment
#
-host_libs="mmalloc libiberty opcodes bfd readline glob gash tcl tk tclX"
+host_libs="mmalloc libiberty opcodes bfd readline gash tcl tk tclX"
+
+if [ "${enable_gdbgui}" = "yes" ] ; then
+ host_libs="${host_libs} libgui"
+fi
# these tools are built for the host environment
#
-host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
- prms send-pr gprof gdbtest tgas etc expect dejagnu sim
- m4 autoconf ispell grep diff rcs cvs fileutils shellutils
- textutils wdiff find emacs uudecode hello tar gzip indent
- recode release sed utils"
+host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu sim bash m4 autoconf ispell grep diff rcs cvs fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
#
-target_libs="libm xiberty newlib libio libg++"
+target_libs="target-libiberty target-libgloss target-newlib target-libio target-librx target-libstdc++ target-libg++"
# these tools are built using the target libs, and are intended to run only
-# in the target environment. we currently have none.
+# in the target environment
#
# note: any program that *uses* libraries that are in the "target_libs"
# list belongs in this list. those programs are also very likely
# candidates for the "native_only" list which follows
#
-target_tools="groff"
+target_tools="target-examples target-groff"
################################################################################
## These two lists are of directories that are to be removed from the
## ${configdirs} list for either cross-compilations or for native-
## compilations. For example, it doesn't make that much sense to
-## cross-compile Emacs, nor is it terribly useful to compile xiberty in
+## cross-compile Emacs, nor is it terribly useful to compile target-libiberty in
## a native environment.
# directories to be built in the native environment only
#
-native_only="autoconf cvs emacs fileutils find grep groff gzip hello indent
- ispell m4 rcs recode sed shellutils tar textutils gash tk uudecode wdiff
- gprof"
+# This must be a single line because of the way it is searched by grep in
+# the code below.
+native_only="autoconf cvs emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms"
# directories to be built in a cross environment only
#
-cross_only="xiberty newlib"
+cross_only="target-libiberty target-libgloss target-newlib"
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
## is important because configure will choke if they ever get through.
+## ${configdirs} is directories we build using the host tools.
+## ${target_configdirs} is directories we build using the target tools.
#
-configdirs=`echo ${host_libs} ${host_tools} ${target_libs} ${target_tools}`
+configdirs=`echo ${host_libs} ${host_tools}`
+target_configdirs=`echo ${target_libs} ${target_tools}`
################################################################################
m68k-hp-hpux*) host_makefile_frag=config/mh-hp300 ;;
m68k-apollo-sysv*) host_makefile_frag=config/mh-apollo68 ;;
m68k-apollo-bsd*) host_makefile_frag=config/mh-a68bsd ;;
- m88k-motorola-sysv*) host_makefile_frag=config/mh-delta88;;
m88k-dg-dgux*) host_makefile_frag=config/mh-dgux ;;
+ m88k-harris-cxux*) host_makefile_frag=config/mh-cxux ;;
+ m88k-motorola-sysv*) host_makefile_frag=config/mh-delta88;;
mips*-dec-ultrix*) host_makefile_frag=config/mh-decstation ;;
- mips*-sgi-irix5*) host_makefile_frag=config/mh-irix5 ;;
+ mips*-nec-sysv4*) host_makefile_frag=config/mh-necv4 ;;
+ mips*-sgi-irix6*) host_makefile_frag=config/mh-irix6 ;;
+ mips*-sgi-irix5*) host_makefile_frag=config/mh-irix5 ;;
mips*-sgi-irix4*) host_makefile_frag=config/mh-irix4 ;;
mips*-sgi-irix3*) host_makefile_frag=config/mh-sysv ;;
mips*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
mips*-*-sysv*) host_makefile_frag=config/mh-riscos ;;
- i[34]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
- i[34]86-*-sco*) host_makefile_frag=config/mh-sco ;;
- i[34]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
- i[34]86-*-linux*) host_makefile_frag=config/mh-linux ;;
- i[34]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
- i[34]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
- i[34]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
+ i[3456]86-*-dgux*) host_makefile_frag=config/mh-dgux386 ;;
+ i[3456]86-ncr-sysv4.3) host_makefile_frag=config/mh-ncrsvr43 ;;
+ i[3456]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
+ i[3456]86-*-sco3.2v5*) host_makefile_frag=config/mh-sysv ;;
+ i[3456]86-*-sco*) host_makefile_frag=config/mh-sco ;;
+ i[3456]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
+ i[3456]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
+ i[3456]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
+ i[3456]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
+ *-cygwin32*) host_makefile_frag=config/mh-cygwin32 ;;
+ *-windows*) host_makefile_frag=config/mh-windows ;;
vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
- *-ibm-aix*) host_makefile_frag=config/mh-aix ;;
- *-bull-bosx*) host_makefile_frag=config/mh-aix ;;
*-*-solaris2*) host_makefile_frag=config/mh-solaris ;;
- m68k-sun-*) host_makefile_frag=config/mh-sun3 ;;
- *-sun-*) host_makefile_frag=config/mh-sun ;;
+ m68k-sun-sunos*) host_makefile_frag=config/mh-sun3 ;;
+ *-hp-hpux[78]*) host_makefile_frag=config/mh-hpux8 ;;
*-hp-hpux*) host_makefile_frag=config/mh-hpux ;;
*-*-hiux*) host_makefile_frag=config/mh-hpux ;;
rs6000-*-lynxos*) host_makefile_frag=config/mh-lynxrs6k ;;
esac
fi
+# If we aren't going to be using gcc, see if we can extract a definition
+# of CC from the fragment.
+if [ -z "${CC}" -a "${build}" = "${host}" ]; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ found=
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/gcc; then
+ found=yes
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if [ -z "${found}" -a -n "${host_makefile_frag}" -a -f "${srcdir}/${host_makefile_frag}" ]; then
+ xx=`sed -n -e 's/^[ ]*CC[ ]*=[ ]*\(.*\)$/\1/p' < ${srcdir}/${host_makefile_frag}`
+ if [ -n "${xx}" ] ; then
+ CC=$xx
+ fi
+ fi
+fi
+
+# We default to --with-shared on platforms where -fpic is meaningless.
+# Well, we don't yet, but we will.
+if false && [ "${host}" = "${target}" ] && [ x${enable_shared} = x ]; then
+ case "${target}" in
+ alpha-dec-osf*) enable_shared=yes ;;
+ alpha-*-linux*) enable_shared=yes ;;
+ mips-sgi-irix5*) enable_shared=yes ;;
+ *) enable_shared=no ;;
+ esac
+fi
+
+case "${enable_shared}" in
+ yes) shared=yes ;;
+ no) shared=no ;;
+ "") shared=no ;;
+ *) shared=yes ;;
+esac
+
+if [ x${shared} = xyes ]; then
+ waugh=
+ case "${host}" in
+ hppa*) waugh=config/mh-papic ;;
+ i[3456]86-*) waugh=config/mh-x86pic ;;
+ sparc64-*) waugh=config/mh-sparcpic ;;
+ *) waugh=config/mh-${host_cpu}pic ;;
+ esac
+ if [ -f ${srcdir}/${waugh} ]; then
+ if [ -n "${host_makefile_frag}" ] ; then
+ cat ${srcdir}/${host_makefile_frag} > mh-frag
+ cat ${srcdir}/${waugh} >> mh-frag
+ host_makefile_frag=mh-frag
+ else
+ host_makefile_frag=${waugh}
+ fi
+ fi
+fi
+
# per-target:
+case "${target}" in
+ v810*) target_makefile_frag=config/mt-v810 ;;
+ i[3456]86-*-netware*) target_makefile_frag=config/mt-netware ;;
+# start-sanitize-r5900
+ mips64vr5900*-*-*) target_makefile_frag=config/mt-r5900 ;;
+# end-sanitize-r5900
+ powerpc-*-netware*) target_makefile_frag=config/mt-netware ;;
+esac
+
+skipdirs=
gasdir=gas
use_gnu_ld=
use_gnu_as=
yes | "") # the default value for this tree is that X11 is available
;;
no)
- configdirs=`echo " ${configdirs} " | sed -e 's/ tk / /;/ gash / /'`
+ skipdirs="${skipdirs} tk gash"
;;
*)
echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
;;
esac
-
-
# Some tools are only suitable for building in a "native" situation.
# Those are added when we have a host==target configuration. For cross
# toolchains, we add some directories that should only be useful in a
is_cross_compiler=
-# Remove patch suffixes from host and target names.
-# Example: 'sparc-sun-sunos4.1.3_U1'
-# See similar code in configure.
-hostnop=`echo ${host} | sed '/sun-sunos/s/_U1//'`
-targetnop=`echo ${target} | sed '/sun-sunos/s/_U1//'`
-
-if [ x"${hostnop}" = x"${targetnop}" ] ; then
+if [ x"${host}" = x"${target}" ] ; then
# when doing a native toolchain, don't build the targets
# that are in the 'cross only' list
- for i in ${cross_only} ; do
- configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"`
- done
+ skipdirs="${skipdirs} ${cross_only}"
is_cross_compiler=no
+ target_subdir=.
else
# similarly, don't build the targets in the 'native only'
# list when building a cross compiler
- for i in ${native_only} ; do
- configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"`
- done
+ skipdirs="${skipdirs} ${native_only}"
is_cross_compiler=yes
+ target_subdir=${target_alias}
+ if [ ! -d ${target_subdir} ] ; then
+ if mkdir ${target_subdir} ; then true
+ else
+ echo "'*** could not make ${PWD=`pwd`}/${target_subdir}" 1>&2
+ exit 1
+ fi
+ fi
fi
+copy_dirs=
+
+# Handle --with-headers=XXX. The contents of the named directory are
+# copied to $(tooldir)/sys-include.
+if [ x"${with_headers}" != x ]; then
+ if [ x${is_cross_compiler} = xno ]; then
+ echo 1>&2 '***' --with-headers is only supported when cross compiling
+ exit 1
+ fi
+ case "${exec_prefixoption}" in
+ "") x=${prefix} ;;
+ *) x=${exec_prefix} ;;
+ esac
+ copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
+fi
+
+# Handle --with-libs=XXX. Multiple directories are permitted. The
+# contents are copied to $(tooldir)/lib.
+if [ x"${with_libs}" != x ]; then
+ if [ x${is_cross_compiler} = xno ]; then
+ echo 1>&2 '***' --with-libs is only supported when cross compiling
+ exit 1
+ fi
+ # Copy the libraries in reverse order, so that files in the first named
+ # library override files in subsequent libraries.
+ case "${exec_prefixoption}" in
+ "") x=${prefix} ;;
+ *) x=${exec_prefix} ;;
+ esac
+ for l in ${with_libs}; do
+ copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
+ done
+fi
+
+# If both --with-headers and --with-libs are specified, default to
+# --without-newlib.
+if [ x"${with_headers}" != x ] && [ x"${with_libs}" != x ]; then
+ if [ x"${with_newlib}" = x ]; then
+ with_newlib=no
+ fi
+fi
+
+# Recognize --with-newlib/--without-newlib.
+if [ x${with_newlib} = xno ]; then
+ skipdirs="${skipdirs} target-newlib"
+elif [ x${with_newlib} = xyes ]; then
+ skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+fi
+
+# Default to using --with-stabs for certain targets.
+if [ x${with_stabs} = x ]; then
+ case "${target}" in
+ mips*-*-irix6*)
+ ;;
+ mips*-*-* | alpha*-*-osf* | i[3456]86*-*-sysv4* | i[3456]86*-*-unixware*)
+ with_stabs=yes;
+ withoptions="${withoptions} --with-stabs"
+ ;;
+ esac
+fi
+
+# Handle ${copy_dirs}
+set fnord ${copy_dirs}
+shift
+while [ $# != 0 ]; do
+ if [ -f $2/COPIED ] && [ x"`cat $2/COPIED`" = x"$1" ]; then
+ :
+ else
+ echo Copying $1 to $2
+
+ # Use the install script to create the directory and all required
+ # parent directories.
+ if [ -d $2 ]; then
+ :
+ else
+ echo >config.temp
+ ${srcdir}/install.sh -c -m 644 config.temp $2/COPIED
+ fi
+
+ # Copy the directory, assuming we have tar.
+ # FIXME: Should we use B in the second tar? Not all systems support it.
+ (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
+
+ # It is the responsibility of the user to correctly adjust all
+ # symlinks. If somebody can figure out how to handle them correctly
+ # here, feel free to add the code.
+
+ echo $1 > $2/COPIED
+ fi
+ shift; shift
+done
+
# Configure extra directories which are host specific
case "${host}" in
- i[34]86-*-go32*)
- configdirs="$configdirs dosrel" ;;
+ i[3456]86-*-go32*)
+ configdirs="$configdirs dosrel" ;;
+ *-cygwin32*)
+ configdirs="$configdirs dosrel" ;;
esac
# Remove more programs from consideration, based on the host or
noconfigdirs=""
case "${host}" in
- i[34]86-*-netbsd*)
- noconfigdirs="tk fileutils"
+ i[3456]86-*-vsta)
+ noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet"
+ ;;
+ i[3456]86-*-go32)
+ noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet"
+ ;;
+ *-*-cygwin32)
+ noconfigdirs="tk tcl expect dejagnu cvs autoconf bison send-pr gprof rcs guile perl texinfo apache inet"
;;
- i[34]86-*-vsta)
- noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
+ *-*-windows*)
+# This is only used to build WinGDB...
+ configdirs="bfd gdb libiberty opcodes readline sim"
+ target_configdirs=
;;
- i[34]86-*-go32)
- noconfigdirs="tcl expect deja-gnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
+ ppc*-*-pe)
+ noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf texinfo bison send-pr gprof rcs guile perl apache inet"
;;
esac
-
-
-
case "${target}" in
- alpha-dec-osf1*)
- noconfigdirs="$noconfigdirs emacs fileutils grep newlib"
- ;;
+ *-*-netware)
+ noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-librx target-newlib target-libiberty target-libgloss"
+ ;;
+ *-*-vxworks*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ alpha-dec-osf*)
+ # ld works, but does not support shared libraries. emacs doesn't
+ # work. newlib is not 64 bit ready. I'm not sure about fileutils or grep.
+ # gas doesn't generate exception information.
+ noconfigdirs="$noconfigdirs gas ld emacs fileutils grep target-newlib target-libgloss"
+ ;;
+ alpha*-*-*vms*)
+ noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss"
+ ;;
alpha*-*-*)
- noconfigdirs="$noconfigdirs newlib"
- ;;
+ # newlib is not 64 bit ready
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+# start-sanitize-arc
+ arc-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+# end-sanitize-arc
+ arm-*-pe*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+ arm-*-coff*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+ arm-*-riscix*)
+ noconfigdirs="$noconfigdirs ld target-libgloss"
+ ;;
+# start-sanitize-d10v
+ d10v-*-*)
+ noconfigdirs="$noconfigdirs target-librx target-libg++ target-libstdc++ target-libio target-libgloss"
+ ;;
+# end-sanitize-d10v
h8300*-*-* | \
h8500-*-*)
- noconfigdirs="$noconfigdirs libg++ libio"
+ noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
;;
- hppa*-*-*elf*)
+ hppa*-*-*elf* | \
+ hppa*-*-lites*)
# Do configure ld/binutils/gas for this case.
;;
hppa*-*-*)
# HP's C compiler doesn't handle Emacs correctly (but on BSD and Mach
# cc is gcc, and on any system a user should be able to link cc to
- # whatever they want. FIXME, emacs).
+ # whatever they want. FIXME, emacs emacs19).
case "${CC}" in
- "" | cc*) noconfigdirs="$noconfigdirs emacs" ;;
+ "" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
*) ;;
esac
noconfigdirs="$noconfigdirs ld shellutils"
;;
- i[34]86-*-go32)
- # add the go32 support tools to the list
+ i[3456]86-*-go32)
# but don't build gdb
- configdirs=`echo go32 ${configdirs}`
- noconfigdirs="$noconfigdirs gdb libg++ libio"
+ noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
;;
- i[34]86-*-sco*)
- noconfigdirs="$noconfigdirs gprof"
+ *-*-cygwin32)
+ target_configdirs="$target_configdirs target-winsup"
+ noconfigdirs="$noconfigdirs tcl tk expect target-libgloss"
+ # always build newlib.
+ skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+
+ # Can't build gdb for cygwin32 if not native.
+ case "${host}" in
+ *-*-cygwin32) ;; # keep gdb
+ *) noconfigdirs="$noconfigdirs gdb"
+ esac
+ ;;
+ i[3456]86-*-pe)
+ noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
;;
- i[34]86-*-solaris2*)
+ i[3456]86-*-sco3.2v5*)
+ # The linker does not yet know about weak symbols in COFF,
+ # and is not configured to handle mixed ELF and COFF.
+ noconfigdirs="$noconfigdirs gprof ld target-libgloss"
+ ;;
+ i[3456]86-*-sco*)
+ noconfigdirs="$noconfigdirs gprof target-libgloss"
+ ;;
+ i[3456]86-*-solaris2*)
# The linker does static linking correctly, but the Solaris C library
# has bugs such that some important functions won't work when statically
# linked. (See man pages for getpwuid, for example.)
- noconfigdirs="$noconfigdirs ld"
+ noconfigdirs="$noconfigdirs ld target-libgloss"
;;
- i[34]86-*-sysv4*)
+ i[3456]86-*-sysv4*)
# The SYSV4 C compiler doesn't handle Emacs correctly
case "${CC}" in
- "" | cc*) noconfigdirs="$noconfigdirs emacs" ;;
+ "" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
*) ;;
esac
# but that's okay since emacs doesn't work anyway
- noconfigdirs="$noconfigdirs emacs"
+ noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss"
+ ;;
+ mn10200-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+ mn10300-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs ld binutils gprof textutils cvs"
+ noconfigdirs="$noconfigdirs gprof cvs target-libgloss"
+ # This is needed until gcc and ld are fixed to work together.
+ use_gnu_ld=no
+ ;;
+ powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
+ target_configdirs="$target_configdirs target-winsup"
+ noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss"
+ # always build newlib.
+ skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+ ;;
+ # This is temporary until we can link against shared libraries
+ powerpcle-*-solaris*)
+ noconfigdirs="$noconfigdirs gdb sim make tcl tk expect"
;;
rs6000-*-lynxos*)
- # a gcc built textutils will cause the linker to hang on 'join'
# The CVS server code doesn't work on the RS/6000
# Newlib makes problems for libg++ in crosses.
- noconfigdirs="$noconfigdirs gas ld newlib binutils gprof textutils cvs diff make tcl expect texinfo"
+ noconfigdirs="$noconfigdirs target-newlib gprof cvs"
+ ;;
+ rs6000-*-aix*)
+ noconfigdirs="$noconfigdirs gprof"
+ # This is needed until gcc and ld are fixed to work together.
use_gnu_ld=no
- use_gnu_as=no
;;
rs6000-*-*)
- # a gcc built textutils will cause the linker to hang on 'join'
- # The CVS server code doesn't work on the RS/6000
- noconfigdirs="$noconfigdirs ld binutils gprof textutils cvs"
+ noconfigdirs="$noconfigdirs gprof"
;;
m68k-apollo-*)
- noconfigdirs="$noconfigdirs ld binutils gprof"
+ noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss"
;;
mips*-*-irix5*)
# The GNU linker does not support shared libraries.
- noconfigdirs="$noconfigdirs ld gprof"
+ # emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
+ noconfigdirs="$noconfigdirs ld gprof emacs target-libgloss"
+ ;;
+ mips*-*-irix6*)
+ # The GNU linker does not support shared libraries.
+ # emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
+ noconfigdirs="$noconfigdirs ld gas gprof emacs target-libgloss"
;;
mips*-dec-bsd*)
- noconfigdirs="$noconfigdirs gprof"
+ noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
mips*-*-bsd*)
- noconfigdirs="$noconfigdirs gprof ld"
+ noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
mips*-*-*)
noconfigdirs="$noconfigdirs gprof"
;;
romp-*-*)
- noconfigdirs="bfd binutils ld gas opcodes"
+ noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss"
;;
sh-*-*)
case "${host}" in
- i[34]86-*-vsta) ;; # don't add gprof back in
- *) configdirs=`echo gprof ${configdirs}` ;;
- i[34]86-*-go32) ;; # don't add gprof back in
- *) configdirs=`echo gprof ${configdirs}` ;;
+ i[3456]86-*-vsta) ;; # don't add gprof back in
+ i[3456]86-*-go32) ;; # don't add gprof back in
+ *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
sparc-*-sunos4*)
if [ x${is_cross_compiler} != xno ] ; then
- noconfigdirs="$noconfigdirs gdb gdbtest newlib sim dejagnu expect tcl"
+ noconfigdirs="$noconfigdirs gdb gdbtest target-newlib target-libgloss"
else
use_gnu_ld=no
fi
;;
+# start-sanitize-tic80
+ tic80-*-*)
+ noconfigdirs="$noconfigdirs gcc gdb ld target-libio target-libg++ target-libstdc++ target-libgloss"
+ ;;
+# end-sanitize-tic80
+ v810-*-*)
+ noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libio target-libg++ target-libstdc++ opcodes target-libgloss"
+ ;;
+# start-sanitize-v850
+ v850-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+# end-sanitize-v850
vax-*-vms)
- noconfigdirs="$noconfigdirs bfd binutils gdb ld newlib opcodes"
+ noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss"
;;
vax-*-*)
- noconfigdirs="$noconfigdirs newlib"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-lynxos*)
- # Newlib makes problems for libg++ in crosses.
- noconfigdirs="$noconfigdirs newlib"
- ;;
+ # Newlib makes problems for libg++ in crosses.
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-macos* | \
+ *-*-mpw*)
+ # Macs want a resource compiler.
+ configdirs="$configdirs grez"
+ ;;
esac
+# targets that need a second pass
+case "${target}" in
+ *-gm-magic*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+esac
+
+# If we aren't building newlib, then don't build libgloss, since libgloss
+# depends upon some newlib header files.
+case "${noconfigdirs}" in
+ *target-libgloss*) ;;
+ *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
+esac
+
+# If we are building a Canadian Cross, discard tools that can not be built
+# using a cross compiler. FIXME: These tools should be fixed.
+if [ "${build}" != "${host}" ]; then
+ noconfigdirs="$noconfigdirs tcl tk expect dejagnu"
+fi
+
+# Make sure we don't let GNU ld be added if we didn't want it.
+if [ x$with_gnu_ld = xno ]; then
+ use_gnu_ld=no
+ noconfigdirs="$noconfigdirs ld"
+fi
+
+# Make sure we don't let GNU as be added if we didn't want it.
+if [ x$with_gnu_as = xno ]; then
+ use_gnu_as=no
+ noconfigdirs="$noconfigdirs gas"
+fi
+
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
+# $target_configdirs.
+# If we have the source for $noconfigdirs entries, add them to $notsupp.
+
notsupp=""
-for dir in . $noconfigdirs ; do
- if [ $dir != . ] && echo "# ${configdirs} #" | grep "${dir} " >/dev/null 2>&1 ; then
+for dir in . $skipdirs $noconfigdirs ; do
+ dirname=`echo $dir | sed -e s/target-//g`
+ if [ $dir != . ] && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
- if [ -r $srcdir/$dir/configure ] || [ -r $srcdir/$dir/configure.in ]; then
- notsupp="$notsupp $dir"
+ if [ -r $srcdir/$dirname/configure ] \
+ || [ -r $srcdir/$dirname/configure.in ]; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+ if [ $dir != . ] && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
+ if [ -r $srcdir/$dirname/configure ] \
+ || [ -r $srcdir/$dirname/configure.in ]; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
fi
fi
done
+# Sometimes the tools are distributed with libiberty but with no other
+# libraries. In that case, we don't want to build target-libiberty.
+if [ -n "${target_configdirs}" ]; then
+ others=
+ for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
+ if [ "$i" != "libiberty" ]; then
+ if [ -r $srcdir/$i/configure ] || [ -r $srcdir/$i/configure.in ]; then
+ others=yes;
+ break;
+ fi
+ fi
+ done
+ if [ -z "${others}" ]; then
+ target_configdirs=
+ fi
+fi
+
+# Deconfigure all subdirectories, in case we are changing the
+# configuration from one where a subdirectory is supported to one where it
+# is not.
+if [ -z "${norecursion}" -a -n "${configdirs}" ]; then
+ for i in `echo ${configdirs} | sed -e s/target-//g` ; do
+ rm -f $i/Makefile
+ done
+fi
+if [ -z "${norecursion}" -a -n "${target_configdirs}" ]; then
+ for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
+ rm -f ${target_subdir}/$i/Makefile
+ done
+fi
+
# Produce a warning message for the subdirs we can't configure.
# This isn't especially interesting in the Cygnus tree, but in the individual
# FSF releases, it's important to let people know when their machine isn't
# pretend that all is well.)
if [ -n "$appdirs" ]; then
for dir in $appdirs ; do
- if [ -r $dir/Makefile.in ] && echo "# ${configdirs} #" | grep "${dir} " >/dev/null 2>&1 ; then
- appdirs=""
- break
+ if [ -r $dir/Makefile.in ]; then
+ if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
fi
done
if [ -n "$appdirs" ]; then
fi
fi
+# If using newlib, add --with-newlib to the withoptions so that gcc/configure
+# can detect this case.
+
+if [ x${with_newlib} != xno ] && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 && [ -d ${srcdir}/newlib ] ; then
+ with_newlib=yes
+ withoptions="$withoptions --with-newlib"
+fi
+
+if [ x${shared} = xyes ]; then
+ case "${target}" in
+ hppa*) target_makefile_frag=config/mt-papic ;;
+ i[3456]86-*) target_makefile_frag=config/mt-x86pic ;;
+ *) target_makefile_frag=config/mt-${target_cpu}pic ;;
+ esac
+fi
+
+# post-target:
+
+# Make sure that the compiler is able to generate an executable. If it
+# can't, we are probably in trouble. We don't care whether we can run the
+# executable--we might be using a cross compiler--we only care whether it
+# can be created. At this point the main configure script has set CC.
+echo "int main () { return 0; }" > conftest.c
+${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
+if [ $? = 0 ] && [ -s conftest ]; then
+ :
+else
+ echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
+ echo 1>&2 "*** You must set the environment variable CC to a working compiler."
+ rm -f conftest*
+ exit 1
+fi
+rm -f conftest*
+
+# The Solaris /usr/ucb/cc compiler does not appear to work.
+case "${host}" in
+ sparc-sun-solaris2*)
+ CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
+ if [ "`/usr/bin/which $CCBASE`" = "/usr/ucb/cc" ] ; then
+ could_use=
+ [ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
+ if [ -d /opt/cygnus/bin ] ; then
+ if [ "$could_use" = "" ] ; then
+ could_use="/opt/cygnus/bin"
+ else
+ could_use="$could_use or /opt/cygnus/bin"
+ fi
+ fi
+ if [ "$could_use" = "" ] ; then
+ echo "Warning: compilation may fail because you're using"
+ echo "/usr/ucb/cc. You should change your PATH or CC "
+ echo "variable and rerun configure."
+ else
+ echo "Warning: compilation may fail because you're using"
+ echo "/usr/ucb/cc, when you should use the C compiler from"
+ echo "$could_use. You should change your"
+ echo "PATH or CC variable and rerun configure."
+ fi
+ fi
+ ;;
+esac
+
+# If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
+# binutils tools will find libbfd.so.
+if [ "${shared}" = "yes" ]; then
+ sed -e 's/^SET_LIB_PATH[ ]*=.*$/SET_LIB_PATH = $(REALLY_SET_LIB_PATH)/' \
+ Makefile > Makefile.tem
+ rm -f Makefile
+ mv -f Makefile.tem Makefile
+
+ case "${host}" in
+ *-*-hpux*)
+ sed -e 's/RPATH_ENVVAR[ ]*=.*$/RPATH_ENVVAR = SHLIB_PATH/' \
+ Makefile > Makefile.tem
+ rm -f Makefile
+ mv -f Makefile.tem Makefile
+ ;;
+ esac
+fi
+
+# Record target_configdirs and the configure arguments in Makefile.
+target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
+targargs=`echo "${arguments}" | \
+ sed -e 's/--norecursion//' \
+ -e 's/--cache[a-z-]*=[^ ]*//' \
+ -e 's/--ho[a-z-]*=[^ ]*//' \
+ -e 's/--ta[a-z-]*=[^ ]*//'`
+
+# Passing a --with-cross-host argument lets the target libraries know
+# whether they are being built with a cross-compiler or being built
+# native. However, it would be better to use other mechanisms to make the
+# sorts of decisions they want to make on this basis. Please consider
+# this option to be deprecated. FIXME.
+if [ x${is_cross_compiler} = xyes ]; then
+ targargs="--with-cross-host=${host_alias} ${targargs}"
+fi
+
+targargs="--host=${target_alias} ${targargs}"
+sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
+ -e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
+ -e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
+ Makefile > Makefile.tem
+rm -f Makefile
+mv -f Makefile.tem Makefile
+
#
# Local Variables:
# fill-column: 131
projects / deliverable / binutils-gdb.git / blobdiff