## For more information on these two systems, check out the documentation
## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
-# Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
+# Copyright (C) 1992, 93, 94, 95, 96, 97, 1998 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# these libraries are used by various programs built for the host environment
#
-host_libs="mmalloc libiberty opcodes bfd readline gash db tcl tk tclX itcl tix libgui"
+host_libs="intl mmalloc libiberty opcodes bfd readline gash db tcl tk tclX itcl tix libgui"
# start-sanitize-ide
-host_libs="${host_libs} libide"
+host_libs="${host_libs} libide libidetcl"
# end-sanitize-ide
if [ "${enable_gdbgui}" = "yes" ] ; then
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
-host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu bash m4 autoconf automake ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils sn"
+host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext"
# start-sanitize-ide
host_tools="${host_tools} ilu vmake jstools"
# end-sanitize-ide
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
#
-target_libs="target-libiberty target-libgloss target-newlib target-libio target-librx target-libstdc++ target-libg++"
+target_libs="target-libiberty target-libgloss target-newlib target-libio target-librx target-libstdc++ target-libg++ target-libjava target-boehm-gc"
# these tools are built using the target libs, and are intended to run only
#
# This must be a single line because of the way it is searched by grep in
# the code below.
-native_only="autoconf automake cvssrc emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms sn gnuserv target-gperf"
+native_only="autoconf automake libtool cvssrc emacs emacs19 fileutils find gawk gettext grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time ash bash prms snavigator gnuserv target-gperf libtool"
# directories to be built in a cross environment only
#
-cross_only="target-libgloss target-newlib target-cygmon target-opcodes"
+cross_only="target-libgloss target-newlib target-cygmon target-opcodes target-libstub"
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
mips*-*-sysv*)
host_makefile_frag="${host_makefile_frag} config/mh-riscos"
;;
+ i[3456]86-*-sysv5*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv5"
+ ;;
i[3456]86-*-dgux*)
host_makefile_frag="${host_makefile_frag} config/mh-dgux386"
;;
*-mingw32*)
host_makefile_frag="${host_makefile_frag} config/mh-mingw32"
;;
+# start-sanitize-mswin
*-windows*)
host_makefile_frag="${host_makefile_frag} config/mh-windows"
;;
+# end-sanitize-mswin
vax-*-ultrix2*)
host_makefile_frag="${host_makefile_frag} config/mh-vaxult2"
;;
hppa*)
host_makefile_frag="${host_makefile_frag} config/mh-papic"
;;
+ i[3456]86-*-cygwin32*)
+ # We don't want -fPIC on cygwin32.
+ ;;
i[3456]86-*)
host_makefile_frag="${host_makefile_frag} config/mh-x86pic"
;;
host_makefile_frag="${host_makefile_frag} config/mh-elfalphapic"
;;
*)
- if test -f config/mh-${host_cpu}pic; then
+ if test -f ${srcdir}/config/mh-${host_cpu}pic; then
host_makefile_frag="${host_makefile_frag} config/mh-${host_cpu}pic"
fi
;;
no)
skipdirs="${skipdirs} tk libgui gash"
# start-sanitize-ide
- skipdirs="${skipdirs} libide vmake jstools"
+ skipdirs="${skipdirs} libide libidetcl vmake jstools"
# end-sanitize-ide
;;
*)
case "${host}" in
i[3456]86-*-vsta)
- noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl tix db sn gnuserv"
+ noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext"
# start-sanitize-ide
- noconfigdirs="$noconfigdirs libide vmake jstools"
+ noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
# end-sanitize-ide
;;
i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
- noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db sn gnuserv"
+ noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext"
# start-sanitize-ide
- noconfigdirs="$noconfigdirs libide vmake jstools"
+ noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
# end-sanitize-ide
;;
i[3456]86-*-mingw32*)
- # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db sn gnuserv"
- noconfigdirs="expect dejagnu cvs autoconf automake send-pr gprof rcs guile perl texinfo apache inet"
+ # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv"
+ noconfigdirs="expect dejagnu cvs autoconf automake send-pr gprof rcs guile perl texinfo apache inet libtool"
;;
*-*-cygwin32)
- noconfigdirs="expect dejagnu cvssrc autoconf automake send-pr gprof rcs guile perl texinfo apache inet"
+ noconfigdirs="autoconf automake send-pr gprof rcs guile perl texinfo apache inet"
;;
*-*-windows*)
# This is only used to build WinGDB...
noconfigdirs="rcs"
;;
ppc*-*-pe)
- noconfigdirs="patch diff make tk tcl expect dejagnu cvssrc autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl tix db sn gnuserv"
+ noconfigdirs="patch diff make tk tcl expect dejagnu cvssrc autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl tix db snavigator gnuserv"
# start-sanitize-ide
- noconfigdirs="$noconfigdirs libide vmake jstools"
+ noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
# end-sanitize-ide
;;
esac
arm-*-coff*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
- thumb-*-coff) # CYGNUS LOCAL nickc/thumb
+ thumb-*-coff)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+ thumb-*-pe) # CYGNUS LOCAL nickc/thumb
noconfigdirs="$noconfigdirs target-libgloss"
;;
arm-*-riscix*)
target_configdirs="$target_configdirs target-mingw"
noconfigdirs="$noconfigdirs expect target-libgloss"
- # Can't build gdb for cygwin32 if not native.
+ # Can't build gdb for mingw32 if not native.
case "${host}" in
i[3456]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db sn gnuserv"
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db snavigator gnuserv"
;;
esac
;;
- *-*-cygwin32)
+ *-*-cygwin32*)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs expect target-libgloss"
+ noconfigdirs="$noconfigdirs target-gperf target-libgloss"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
# Can't build gdb for cygwin32 if not native.
case "${host}" in
- *-*-cygwin32) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db sn gnuserv"
+ *-*-cygwin32*) ;; # keep gdb tcl tk expect etc.
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui db snavigator gnuserv"
# start-sanitize-ide
- noconfigdirs="$noconfigdirs libide vmake jstools"
+ noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
# end-sanitize-ide
;;
esac
i[3456]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
# and is not configured to handle mixed ELF and COFF.
- noconfigdirs="$noconfigdirs gprof ld target-libgloss"
+ noconfigdirs="$noconfigdirs ld target-libgloss"
;;
i[3456]86-*-sco*)
noconfigdirs="$noconfigdirs gprof target-libgloss"
noconfigdirs="$noconfigdirs target-libgloss"
;;
mn10300-*-*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs"
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db sn gnuserv"
+ noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db snavigator gnuserv"
# start-sanitize-ide
- noconfigdirs="$noconfigdirs libide vmake jstools"
+ noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
# end-sanitize-ide
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db sn gnuserv"
+ noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db snavigator gnuserv"
# start-sanitize-ide
- noconfigdirs="$noconfigdirs libide vmake jstools"
+ noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
# end-sanitize-ide
;;
rs6000-*-lynxos*)
;;
sparc-*-elf*)
if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-cygmon"
+ target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
;;
sparc64-*-elf*)
if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-cygmon"
+ target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
;;
sparclite-*-aout*)
if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-cygmon"
+ target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
;;
sparc-*-sunos4*)
fi
;;
# start-sanitize-sky
- txvu-*-elf*)
- noconfigdirs="$noconfigdirs gcc gdb"
+ dvp-*-elf*)
+ noconfigdirs="$noconfigdirs gcc gdb sim"
+ noconfigdirs="$noconfigdirs itcl libgui tk tix"
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty"
noconfigdirs="$noconfigdirs target-librx target-libg++ target-libstdc++ target-libio"
;;
*target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
esac
-# If we are building a Canadian Cross, discard tools that can not be built
-# using a cross compiler. FIXME: These tools should be fixed.
-if [ "${build}" != "${host}" ]; then
- noconfigdirs="$noconfigdirs expect dejagnu"
-fi
-
# Make sure we don't let GNU ld be added if we didn't want it.
if [ x$with_gnu_ld = xno ]; then
use_gnu_ld=no
target_makefile_frag="${target_makefile_frag} config/mt-elfalphapic"
;;
*)
- if test -f config/mt-${target_cpu}pic; then
+ if test -f ${srcdir}/config/mt-${target_cpu}pic; then
target_makefile_frag="${target_makefile_frag} config/mt-${target_cpu}pic"
fi
;;
# can be created. At this point the main configure script has set CC.
echo "int main () { return 0; }" > conftest.c
${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
-if [ $? = 0 ] && [ -s conftest ]; then
+if [ $? = 0 ] && [ -s conftest -o -s conftest.exe ]; then
:
else
echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."