*/
#include <acpi/acpi.h>
+#include <acpi/accommon.h>
#include <acpi/acevents.h>
#include <acpi/acnamesp.h>
#include <acpi/acinterp.h>
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evregion")
-#define ACPI_NUM_DEFAULT_SPACES 4
-static u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = {
- ACPI_ADR_SPACE_SYSTEM_MEMORY,
- ACPI_ADR_SPACE_SYSTEM_IO,
- ACPI_ADR_SPACE_PCI_CONFIG,
- ACPI_ADR_SPACE_DATA_TABLE
-};
/* Local prototypes */
-
static acpi_status
acpi_ev_reg_run(acpi_handle obj_handle,
u32 level, void *context, void **return_value);
acpi_ev_install_handler(acpi_handle obj_handle,
u32 level, void *context, void **return_value);
+/* These are the address spaces that will get default handlers */
+
+#define ACPI_NUM_DEFAULT_SPACES 4
+
+static u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = {
+ ACPI_ADR_SPACE_SYSTEM_MEMORY,
+ ACPI_ADR_SPACE_SYSTEM_IO,
+ ACPI_ADR_SPACE_PCI_CONFIG,
+ ACPI_ADR_SPACE_DATA_TABLE
+};
+
/*******************************************************************************
*
* FUNCTION: acpi_ev_install_region_handlers
}
/*
- * All address spaces (PCI Config, EC, SMBus) are scope dependent
- * and registration must occur for a specific device.
+ * All address spaces (PCI Config, EC, SMBus) are scope dependent and
+ * registration must occur for a specific device.
*
- * In the case of the system memory and IO address spaces there is currently
- * no device associated with the address space. For these we use the root.
+ * In the case of the system memory and IO address spaces there is
+ * currently no device associated with the address space. For these we
+ * use the root.
*
- * We install the default PCI config space handler at the root so
- * that this space is immediately available even though the we have
- * not enumerated all the PCI Root Buses yet. This is to conform
- * to the ACPI specification which states that the PCI config
- * space must be always available -- even though we are nowhere
- * near ready to find the PCI root buses at this point.
+ * We install the default PCI config space handler at the root so that
+ * this space is immediately available even though the we have not
+ * enumerated all the PCI Root Buses yet. This is to conform to the ACPI
+ * specification which states that the PCI config space must be always
+ * available -- even though we are nowhere near ready to find the PCI root
+ * buses at this point.
*
* NOTE: We ignore AE_ALREADY_EXISTS because this means that a handler
* has already been installed (via acpi_install_address_space_handler).
return_ACPI_STATUS(status);
}
- /*
- * Run the _REG methods for op_regions in each default address space
- */
- for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
+ /* Run the _REG methods for op_regions in each default address space */
- /* TBD: Make sure handler is the DEFAULT handler, otherwise
+ for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
+ /*
+ * TBD: Make sure handler is the DEFAULT handler, otherwise
* _REG will have already been run.
*/
status = acpi_ev_execute_reg_methods(acpi_gbl_root_node,
}
/*
- * It may be the case that the region has never been initialized
+ * It may be the case that the region has never been initialized.
* Some types of regions require special init code
*/
if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) {
- /*
- * This region has not been initialized yet, do it
- */
+
+ /* This region has not been initialized yet, do it */
+
region_setup = handler_desc->address_space.setup;
if (!region_setup) {
}
/*
- * We must exit the interpreter because the region
- * setup will potentially execute control methods
- * (e.g., _REG method for this region)
+ * We must exit the interpreter because the region setup will
+ * potentially execute control methods (for example, the _REG method
+ * for this region)
*/
acpi_ex_exit_interpreter();
return_ACPI_STATUS(status);
}
- /*
- * Region initialization may have been completed by region_setup
- */
+ /* Region initialization may have been completed by region_setup */
+
if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) {
region_obj->region.flags |= AOPOBJ_SETUP_COMPLETE;
}
/*
- * If the region has been activated, call the setup handler
- * with the deactivate notification
+ * If the region has been activated, call the setup handler with
+ * the deactivate notification
*/
if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) {
region_setup = handler_obj->address_space.setup;
}
/*
- * We only care about regions.and objects
- * that are allowed to have address space handlers
+ * We only care about regions and objects that are allowed to have
+ * address space handlers
*/
if ((node->type != ACPI_TYPE_DEVICE) &&
(node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
/*
* Since the object we found it on was a device, then it
* means that someone has already installed a handler for
- * the branch of the namespace from this device on. Just
+ * the branch of the namespace from this device on. Just
* bail out telling the walk routine to not traverse this
- * branch. This preserves the scoping rule for handlers.
+ * branch. This preserves the scoping rule for handlers.
*/
return (AE_CTRL_DEPTH);
}
}
/*
- * As long as the device didn't have a handler for this
- * space we don't care about it. We just ignore it and
- * proceed.
+ * As long as the device didn't have a handler for this space we
+ * don't care about it. We just ignore it and proceed.
*/
return (AE_OK);
}
/* Object is a Region */
if (obj_desc->region.space_id != handler_obj->address_space.space_id) {
- /*
- * This region is for a different address space
- * -- just ignore it
- */
+
+ /* This region is for a different address space, just ignore it */
+
return (AE_OK);
}
/*
- * Now we have a region and it is for the handler's address
- * space type.
+ * Now we have a region and it is for the handler's address space type.
*
* First disconnect region for any previous handler (if any)
*/
ACPI_FUNCTION_TRACE(ev_install_space_handler);
/*
- * This registration is valid for only the types below
- * and the root. This is where the default handlers
- * get placed.
+ * This registration is valid for only the types below and the root. This
+ * is where the default handlers get placed.
*/
if ((node->type != ACPI_TYPE_DEVICE) &&
(node->type != ACPI_TYPE_PROCESSOR) &&
obj_desc = acpi_ns_get_attached_object(node);
if (obj_desc) {
/*
- * The attached device object already exists.
- * Make sure the handler is not already installed.
+ * The attached device object already exists. Make sure the handler
+ * is not already installed.
*/
handler_obj = obj_desc->device.handler;
handler) {
/*
* It is (relatively) OK to attempt to install the SAME
- * handler twice. This can easily happen
- * with PCI_Config space.
+ * handler twice. This can easily happen with the
+ * PCI_Config space.
*/
status = AE_SAME_HANDLER;
goto unlock_and_exit;
/*
* Install the handler
*
- * At this point there is no existing handler.
- * Just allocate the object for the handler and link it
- * into the list.
+ * At this point there is no existing handler. Just allocate the object
+ * for the handler and link it into the list.
*/
handler_obj =
acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_ADDRESS_HANDLER);
ACPI_FUNCTION_TRACE(ev_execute_reg_methods);
/*
- * Run all _REG methods for all Operation Regions for this
- * space ID. This is a separate walk in order to handle any
- * interdependencies between regions and _REG methods. (i.e. handlers
- * must be installed for all regions of this Space ID before we
- * can run any _REG methods)
+ * Run all _REG methods for all Operation Regions for this space ID. This
+ * is a separate walk in order to handle any interdependencies between
+ * regions and _REG methods. (i.e. handlers must be installed for all
+ * regions of this Space ID before we can run any _REG methods)
*/
status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX,
ACPI_NS_WALK_UNLOCK, acpi_ev_reg_run,
}
/*
- * We only care about regions.and objects
- * that are allowed to have address space handlers
+ * We only care about regions.and objects that are allowed to have address
+ * space handlers
*/
if ((node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
return (AE_OK);
/* Object is a Region */
if (obj_desc->region.space_id != space_id) {
- /*
- * This region is for a different address space
- * -- just ignore it
- */
+
+ /* This region is for a different address space, just ignore it */
+
return (AE_OK);
}
projects / deliverable / linux.git / blobdiff