#include <asm/msr.h>
#define DRV_NAME "cs5535"
-#define DRV_VERSION "0.2.11"
+#define DRV_VERSION "0.2.12"
/*
* The Geode (Aka Athlon GX now) uses an internal MSR based
#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 )
/**
- * cs5535_pre_reset - detect cable type
+ * cs5535_cable_detect - detect cable type
* @ap: Port to detect on
+ * @deadline: deadline jiffies for the operation
*
* Perform cable detection for ATA66 capable cable. Return a libata
* cable type.
*/
-static int cs5535_pre_reset(struct ata_port *ap)
+static int cs5535_cable_detect(struct ata_port *ap)
{
u8 cable;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable);
if (cable & 1)
- ap->cbl = ATA_CBL_PATA80;
+ return ATA_CBL_PATA80;
else
- ap->cbl = ATA_CBL_PATA40;
- return ata_std_prereset(ap);
-}
-
-/**
- * cs5535_error_handler - reset/probe
- * @ap: Port to reset
- *
- * Reset and configure a port
- */
-
-static void cs5535_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, cs5535_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ATA_CBL_PATA40;
}
/**
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
- .resume = ata_scsi_device_resume,
- .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations cs5535_port_ops = {
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = cs5535_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = cs5535_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_pio_data_xfer,
+ .data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+ .irq_ack = ata_irq_ack,
.port_start = ata_port_start,
- .port_stop = ata_port_stop,
- .host_stop = ata_host_stop
};
/**
static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- static struct ata_port_info info = {
+ static const struct ata_port_info info = {
.sht = &cs5535_sht,
.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
.pio_mask = 0x1f,
.udma_mask = 0x1f,
.port_ops = &cs5535_port_ops
};
- struct ata_port_info *ports[1] = { &info };
+ const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
u32 timings, dummy;
rdmsr(ATAC_CH0D1_PIO, timings, dummy);
if (CS5535_BAD_PIO(timings))
wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
- return ata_pci_init_one(dev, ports, 1);
+ return ata_pci_init_one(dev, ppi);
}
static const struct pci_device_id cs5535[] = {
.id_table = cs5535,
.probe = cs5535_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init cs5535_init(void)