{ USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3490), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
+ { USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME },
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW },
+ { USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL },
/* Other Intel Bluetooth devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
/* With this Intel bootloader only the hardware variant and device
* revision information are used to select the right firmware.
*
- * Currently this bootloader support is limited to hardware variant
- * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
+ * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
+ *
+ * Currently the supported hardware variants are:
+ * 11 (0x0b) for iBT3.0 (LnP/SfP)
+ * 12 (0x0c) for iBT3.5 (WsP)
*/
- snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.sfi",
+ snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.sfi",
+ le16_to_cpu(ver.hw_variant),
le16_to_cpu(params->dev_revid));
err = request_firmware(&fw, fwname, &hdev->dev);
/* Save the DDC file name for later use to apply once the firmware
* downloading is done.
*/
- snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.ddc",
+ snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.ddc",
+ le16_to_cpu(ver.hw_variant),
le16_to_cpu(params->dev_revid));
kfree_skb(skb);
if (id->driver_info & BTUSB_AMP)
hdev->dev_type = HCI_AMP;
else
- hdev->dev_type = HCI_BREDR;
+ hdev->dev_type = HCI_PRIMARY;
data->hdev = hdev;