#include <asm/cpu_device_id.h>
#include <asm/cpufeature.h>
-#if IS_ENABLED(CONFIG_ACPI)
-#include <acpi/processor.h>
-#endif
-
-#define BYT_RATIOS 0x66a
-#define BYT_VIDS 0x66b
-#define BYT_TURBO_RATIOS 0x66c
-#define BYT_TURBO_VIDS 0x66d
+#define ATOM_RATIOS 0x66a
+#define ATOM_VIDS 0x66b
+#define ATOM_TURBO_RATIOS 0x66c
+#define ATOM_TURBO_VIDS 0x66d
#define FRAC_BITS 8
#define int_tofp(X) ((int64_t)(X) << FRAC_BITS)
struct sample {
int32_t core_pct_busy;
+ int32_t busy_scaled;
u64 aperf;
u64 mperf;
u64 tsc;
u64 prev_aperf;
u64 prev_mperf;
u64 prev_tsc;
+ u64 prev_cummulative_iowait;
struct sample sample;
-#if IS_ENABLED(CONFIG_ACPI)
- struct acpi_processor_performance acpi_perf_data;
-#endif
};
static struct cpudata **all_cpu_data;
int (*get_scaling)(void);
void (*set)(struct cpudata*, int pstate);
void (*get_vid)(struct cpudata *);
+ int32_t (*get_target_pstate)(struct cpudata *);
};
struct cpu_defaults {
struct pstate_funcs funcs;
};
+static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu);
+static inline int32_t get_target_pstate_use_cpu_load(struct cpudata *cpu);
+
static struct pstate_adjust_policy pid_params;
static struct pstate_funcs pstate_funcs;
static int hwp_active;
-static int no_acpi_perf;
struct perf_limits {
int no_turbo;
int max_sysfs_pct;
int min_policy_pct;
int min_sysfs_pct;
- int max_perf_ctl;
- int min_perf_ctl;
};
static struct perf_limits performance_limits = {
.max_sysfs_pct = 100,
.min_policy_pct = 0,
.min_sysfs_pct = 0,
- .max_perf_ctl = 0,
- .min_perf_ctl = 0,
};
#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
static struct perf_limits *limits = &powersave_limits;
#endif
-#if IS_ENABLED(CONFIG_ACPI)
-/*
- * The max target pstate ratio is a 8 bit value in both PLATFORM_INFO MSR and
- * in TURBO_RATIO_LIMIT MSR, which pstate driver stores in max_pstate and
- * max_turbo_pstate fields. The PERF_CTL MSR contains 16 bit value for P state
- * ratio, out of it only high 8 bits are used. For example 0x1700 is setting
- * target ratio 0x17. The _PSS control value stores in a format which can be
- * directly written to PERF_CTL MSR. But in intel_pstate driver this shift
- * occurs during write to PERF_CTL (E.g. for cores core_set_pstate()).
- * This function converts the _PSS control value to intel pstate driver format
- * for comparison and assignment.
- */
-static int convert_to_native_pstate_format(struct cpudata *cpu, int index)
-{
- return cpu->acpi_perf_data.states[index].control >> 8;
-}
-
-static int intel_pstate_init_perf_limits(struct cpufreq_policy *policy)
-{
- struct cpudata *cpu;
- int ret;
- bool turbo_absent = false;
- int max_pstate_index;
- int min_pss_ctl, max_pss_ctl, turbo_pss_ctl;
- int i;
-
- cpu = all_cpu_data[policy->cpu];
-
- pr_debug("intel_pstate: default limits 0x%x 0x%x 0x%x\n",
- cpu->pstate.min_pstate, cpu->pstate.max_pstate,
- cpu->pstate.turbo_pstate);
-
- if (!cpu->acpi_perf_data.shared_cpu_map &&
- zalloc_cpumask_var_node(&cpu->acpi_perf_data.shared_cpu_map,
- GFP_KERNEL, cpu_to_node(policy->cpu))) {
- return -ENOMEM;
- }
-
- ret = acpi_processor_register_performance(&cpu->acpi_perf_data,
- policy->cpu);
- if (ret)
- return ret;
-
- /*
- * Check if the control value in _PSS is for PERF_CTL MSR, which should
- * guarantee that the states returned by it map to the states in our
- * list directly.
- */
- if (cpu->acpi_perf_data.control_register.space_id !=
- ACPI_ADR_SPACE_FIXED_HARDWARE)
- return -EIO;
-
- pr_debug("intel_pstate: CPU%u - ACPI _PSS perf data\n", policy->cpu);
- for (i = 0; i < cpu->acpi_perf_data.state_count; i++)
- pr_debug(" %cP%d: %u MHz, %u mW, 0x%x\n",
- (i == cpu->acpi_perf_data.state ? '*' : ' '), i,
- (u32) cpu->acpi_perf_data.states[i].core_frequency,
- (u32) cpu->acpi_perf_data.states[i].power,
- (u32) cpu->acpi_perf_data.states[i].control);
-
- /*
- * If there is only one entry _PSS, simply ignore _PSS and continue as
- * usual without taking _PSS into account
- */
- if (cpu->acpi_perf_data.state_count < 2)
- return 0;
-
- turbo_pss_ctl = convert_to_native_pstate_format(cpu, 0);
- min_pss_ctl = convert_to_native_pstate_format(cpu,
- cpu->acpi_perf_data.state_count - 1);
- /* Check if there is a turbo freq in _PSS */
- if (turbo_pss_ctl <= cpu->pstate.max_pstate &&
- turbo_pss_ctl > cpu->pstate.min_pstate) {
- pr_debug("intel_pstate: no turbo range exists in _PSS\n");
- limits->no_turbo = limits->turbo_disabled = 1;
- cpu->pstate.turbo_pstate = cpu->pstate.max_pstate;
- turbo_absent = true;
- }
-
- /* Check if the max non turbo p state < Intel P state max */
- max_pstate_index = turbo_absent ? 0 : 1;
- max_pss_ctl = convert_to_native_pstate_format(cpu, max_pstate_index);
- if (max_pss_ctl < cpu->pstate.max_pstate &&
- max_pss_ctl > cpu->pstate.min_pstate)
- cpu->pstate.max_pstate = max_pss_ctl;
-
- /* check If min perf > Intel P State min */
- if (min_pss_ctl > cpu->pstate.min_pstate &&
- min_pss_ctl < cpu->pstate.max_pstate) {
- cpu->pstate.min_pstate = min_pss_ctl;
- policy->cpuinfo.min_freq = min_pss_ctl * cpu->pstate.scaling;
- }
-
- if (turbo_absent)
- policy->cpuinfo.max_freq = cpu->pstate.max_pstate *
- cpu->pstate.scaling;
- else {
- policy->cpuinfo.max_freq = cpu->pstate.turbo_pstate *
- cpu->pstate.scaling;
- /*
- * The _PSS table doesn't contain whole turbo frequency range.
- * This just contains +1 MHZ above the max non turbo frequency,
- * with control value corresponding to max turbo ratio. But
- * when cpufreq set policy is called, it will call with this
- * max frequency, which will cause a reduced performance as
- * this driver uses real max turbo frequency as the max
- * frequeny. So correct this frequency in _PSS table to
- * correct max turbo frequency based on the turbo ratio.
- * Also need to convert to MHz as _PSS freq is in MHz.
- */
- cpu->acpi_perf_data.states[0].core_frequency =
- turbo_pss_ctl * 100;
- }
-
- pr_debug("intel_pstate: Updated limits using _PSS 0x%x 0x%x 0x%x\n",
- cpu->pstate.min_pstate, cpu->pstate.max_pstate,
- cpu->pstate.turbo_pstate);
- pr_debug("intel_pstate: policy max_freq=%d Khz min_freq = %d KHz\n",
- policy->cpuinfo.max_freq, policy->cpuinfo.min_freq);
-
- return 0;
-}
-
-static int intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
-{
- struct cpudata *cpu;
-
- if (!no_acpi_perf)
- return 0;
-
- cpu = all_cpu_data[policy->cpu];
- acpi_processor_unregister_performance(policy->cpu);
- return 0;
-}
-
-#else
-static int intel_pstate_init_perf_limits(struct cpufreq_policy *policy)
-{
- return 0;
-}
-
-static int intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
-{
- return 0;
-}
-#endif
-
static inline void pid_reset(struct _pid *pid, int setpoint, int busy,
int deadband, int integral) {
pid->setpoint = setpoint;
wrmsrl_on_cpu(cpudata->cpu, MSR_PM_ENABLE, 0x1);
}
-static int byt_get_min_pstate(void)
+static int atom_get_min_pstate(void)
{
u64 value;
- rdmsrl(BYT_RATIOS, value);
+ rdmsrl(ATOM_RATIOS, value);
return (value >> 8) & 0x7F;
}
-static int byt_get_max_pstate(void)
+static int atom_get_max_pstate(void)
{
u64 value;
- rdmsrl(BYT_RATIOS, value);
+ rdmsrl(ATOM_RATIOS, value);
return (value >> 16) & 0x7F;
}
-static int byt_get_turbo_pstate(void)
+static int atom_get_turbo_pstate(void)
{
u64 value;
- rdmsrl(BYT_TURBO_RATIOS, value);
+ rdmsrl(ATOM_TURBO_RATIOS, value);
return value & 0x7F;
}
-static void byt_set_pstate(struct cpudata *cpudata, int pstate)
+static void atom_set_pstate(struct cpudata *cpudata, int pstate)
{
u64 val;
int32_t vid_fp;
wrmsrl_on_cpu(cpudata->cpu, MSR_IA32_PERF_CTL, val);
}
-#define BYT_BCLK_FREQS 5
-static int byt_freq_table[BYT_BCLK_FREQS] = { 833, 1000, 1333, 1167, 800};
-
-static int byt_get_scaling(void)
+static int silvermont_get_scaling(void)
{
u64 value;
int i;
+ /* Defined in Table 35-6 from SDM (Sept 2015) */
+ static int silvermont_freq_table[] = {
+ 83300, 100000, 133300, 116700, 80000};
rdmsrl(MSR_FSB_FREQ, value);
- i = value & 0x3;
+ i = value & 0x7;
+ WARN_ON(i > 4);
+
+ return silvermont_freq_table[i];
+}
- BUG_ON(i > BYT_BCLK_FREQS);
+static int airmont_get_scaling(void)
+{
+ u64 value;
+ int i;
+ /* Defined in Table 35-10 from SDM (Sept 2015) */
+ static int airmont_freq_table[] = {
+ 83300, 100000, 133300, 116700, 80000,
+ 93300, 90000, 88900, 87500};
- return byt_freq_table[i] * 100;
+ rdmsrl(MSR_FSB_FREQ, value);
+ i = value & 0xF;
+ WARN_ON(i > 8);
+
+ return airmont_freq_table[i];
}
-static void byt_get_vid(struct cpudata *cpudata)
+static void atom_get_vid(struct cpudata *cpudata)
{
u64 value;
- rdmsrl(BYT_VIDS, value);
+ rdmsrl(ATOM_VIDS, value);
cpudata->vid.min = int_tofp((value >> 8) & 0x7f);
cpudata->vid.max = int_tofp((value >> 16) & 0x7f);
cpudata->vid.ratio = div_fp(
int_tofp(cpudata->pstate.max_pstate -
cpudata->pstate.min_pstate));
- rdmsrl(BYT_TURBO_VIDS, value);
+ rdmsrl(ATOM_TURBO_VIDS, value);
cpudata->vid.turbo = value & 0x7f;
}
.get_turbo = core_get_turbo_pstate,
.get_scaling = core_get_scaling,
.set = core_set_pstate,
+ .get_target_pstate = get_target_pstate_use_performance,
+ },
+};
+
+static struct cpu_defaults silvermont_params = {
+ .pid_policy = {
+ .sample_rate_ms = 10,
+ .deadband = 0,
+ .setpoint = 60,
+ .p_gain_pct = 14,
+ .d_gain_pct = 0,
+ .i_gain_pct = 4,
+ },
+ .funcs = {
+ .get_max = atom_get_max_pstate,
+ .get_max_physical = atom_get_max_pstate,
+ .get_min = atom_get_min_pstate,
+ .get_turbo = atom_get_turbo_pstate,
+ .set = atom_set_pstate,
+ .get_scaling = silvermont_get_scaling,
+ .get_vid = atom_get_vid,
+ .get_target_pstate = get_target_pstate_use_cpu_load,
},
};
-static struct cpu_defaults byt_params = {
+static struct cpu_defaults airmont_params = {
.pid_policy = {
.sample_rate_ms = 10,
.deadband = 0,
.i_gain_pct = 4,
},
.funcs = {
- .get_max = byt_get_max_pstate,
- .get_max_physical = byt_get_max_pstate,
- .get_min = byt_get_min_pstate,
- .get_turbo = byt_get_turbo_pstate,
- .set = byt_set_pstate,
- .get_scaling = byt_get_scaling,
- .get_vid = byt_get_vid,
+ .get_max = atom_get_max_pstate,
+ .get_max_physical = atom_get_max_pstate,
+ .get_min = atom_get_min_pstate,
+ .get_turbo = atom_get_turbo_pstate,
+ .set = atom_set_pstate,
+ .get_scaling = airmont_get_scaling,
+ .get_vid = atom_get_vid,
+ .get_target_pstate = get_target_pstate_use_cpu_load,
},
};
.get_turbo = knl_get_turbo_pstate,
.get_scaling = core_get_scaling,
.set = core_set_pstate,
+ .get_target_pstate = get_target_pstate_use_performance,
},
};
* policy, or by cpu specific default values determined through
* experimentation.
*/
- if (limits->max_perf_ctl && limits->max_sysfs_pct >=
- limits->max_policy_pct) {
- *max = limits->max_perf_ctl;
- } else {
- max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf),
- limits->max_perf));
- *max = clamp_t(int, max_perf_adj, cpu->pstate.min_pstate,
- cpu->pstate.turbo_pstate);
- }
+ max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf), limits->max_perf));
+ *max = clamp_t(int, max_perf_adj,
+ cpu->pstate.min_pstate, cpu->pstate.turbo_pstate);
- if (limits->min_perf_ctl) {
- *min = limits->min_perf_ctl;
- } else {
- min_perf = fp_toint(mul_fp(int_tofp(max_perf),
- limits->min_perf));
- *min = clamp_t(int, min_perf, cpu->pstate.min_pstate, max_perf);
- }
+ min_perf = fp_toint(mul_fp(int_tofp(max_perf), limits->min_perf));
+ *min = clamp_t(int, min_perf, cpu->pstate.min_pstate, max_perf);
}
static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate, bool force)
local_irq_save(flags);
rdmsrl(MSR_IA32_APERF, aperf);
rdmsrl(MSR_IA32_MPERF, mperf);
- if (cpu->prev_mperf == mperf) {
+ tsc = rdtsc();
+ if ((cpu->prev_mperf == mperf) || (cpu->prev_tsc == tsc)) {
local_irq_restore(flags);
return;
}
-
- tsc = rdtsc();
local_irq_restore(flags);
cpu->last_sample_time = cpu->sample.time;
mod_timer_pinned(&cpu->timer, jiffies + delay);
}
-static inline int32_t intel_pstate_get_scaled_busy(struct cpudata *cpu)
+static inline int32_t get_target_pstate_use_cpu_load(struct cpudata *cpu)
+{
+ struct sample *sample = &cpu->sample;
+ u64 cummulative_iowait, delta_iowait_us;
+ u64 delta_iowait_mperf;
+ u64 mperf, now;
+ int32_t cpu_load;
+
+ cummulative_iowait = get_cpu_iowait_time_us(cpu->cpu, &now);
+
+ /*
+ * Convert iowait time into number of IO cycles spent at max_freq.
+ * IO is considered as busy only for the cpu_load algorithm. For
+ * performance this is not needed since we always try to reach the
+ * maximum P-State, so we are already boosting the IOs.
+ */
+ delta_iowait_us = cummulative_iowait - cpu->prev_cummulative_iowait;
+ delta_iowait_mperf = div64_u64(delta_iowait_us * cpu->pstate.scaling *
+ cpu->pstate.max_pstate, MSEC_PER_SEC);
+
+ mperf = cpu->sample.mperf + delta_iowait_mperf;
+ cpu->prev_cummulative_iowait = cummulative_iowait;
+
+
+ /*
+ * The load can be estimated as the ratio of the mperf counter
+ * running at a constant frequency during active periods
+ * (C0) and the time stamp counter running at the same frequency
+ * also during C-states.
+ */
+ cpu_load = div64_u64(int_tofp(100) * mperf, sample->tsc);
+ cpu->sample.busy_scaled = cpu_load;
+
+ return cpu->pstate.current_pstate - pid_calc(&cpu->pid, cpu_load);
+}
+
+static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu)
{
int32_t core_busy, max_pstate, current_pstate, sample_ratio;
s64 duration_us;
core_busy = mul_fp(core_busy, sample_ratio);
}
- return core_busy;
+ cpu->sample.busy_scaled = core_busy;
+ return cpu->pstate.current_pstate - pid_calc(&cpu->pid, core_busy);
}
static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu)
{
- int32_t busy_scaled;
- struct _pid *pid;
- signed int ctl;
- int from;
+ int from, target_pstate;
struct sample *sample;
from = cpu->pstate.current_pstate;
- pid = &cpu->pid;
- busy_scaled = intel_pstate_get_scaled_busy(cpu);
-
- ctl = pid_calc(pid, busy_scaled);
+ target_pstate = pstate_funcs.get_target_pstate(cpu);
- /* Negative values of ctl increase the pstate and vice versa */
- intel_pstate_set_pstate(cpu, cpu->pstate.current_pstate - ctl, true);
+ intel_pstate_set_pstate(cpu, target_pstate, true);
sample = &cpu->sample;
trace_pstate_sample(fp_toint(sample->core_pct_busy),
- fp_toint(busy_scaled),
+ fp_toint(sample->busy_scaled),
from,
cpu->pstate.current_pstate,
sample->mperf,
static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
ICPU(0x2a, core_params),
ICPU(0x2d, core_params),
- ICPU(0x37, byt_params),
+ ICPU(0x37, silvermont_params),
ICPU(0x3a, core_params),
ICPU(0x3c, core_params),
ICPU(0x3d, core_params),
ICPU(0x45, core_params),
ICPU(0x46, core_params),
ICPU(0x47, core_params),
- ICPU(0x4c, byt_params),
+ ICPU(0x4c, airmont_params),
ICPU(0x4e, core_params),
ICPU(0x4f, core_params),
ICPU(0x5e, core_params),
static int intel_pstate_set_policy(struct cpufreq_policy *policy)
{
-#if IS_ENABLED(CONFIG_ACPI)
- struct cpudata *cpu;
- int i;
-#endif
- pr_debug("intel_pstate: %s max %u policy->max %u\n", __func__,
- policy->cpuinfo.max_freq, policy->max);
if (!policy->cpuinfo.max_freq)
return -ENODEV;
policy->max >= policy->cpuinfo.max_freq) {
pr_debug("intel_pstate: set performance\n");
limits = &performance_limits;
+ if (hwp_active)
+ intel_pstate_hwp_set();
return 0;
}
limits = &powersave_limits;
limits->min_policy_pct = (policy->min * 100) / policy->cpuinfo.max_freq;
limits->min_policy_pct = clamp_t(int, limits->min_policy_pct, 0 , 100);
- limits->max_policy_pct = (policy->max * 100) / policy->cpuinfo.max_freq;
+ limits->max_policy_pct = DIV_ROUND_UP(policy->max * 100,
+ policy->cpuinfo.max_freq);
limits->max_policy_pct = clamp_t(int, limits->max_policy_pct, 0 , 100);
/* Normalize user input to [min_policy_pct, max_policy_pct] */
limits->max_sysfs_pct);
limits->max_perf_pct = max(limits->min_policy_pct,
limits->max_perf_pct);
+ limits->max_perf = round_up(limits->max_perf, FRAC_BITS);
/* Make sure min_perf_pct <= max_perf_pct */
limits->min_perf_pct = min(limits->max_perf_pct, limits->min_perf_pct);
limits->max_perf = div_fp(int_tofp(limits->max_perf_pct),
int_tofp(100));
-#if IS_ENABLED(CONFIG_ACPI)
- cpu = all_cpu_data[policy->cpu];
- for (i = 0; i < cpu->acpi_perf_data.state_count; i++) {
- int control;
-
- control = convert_to_native_pstate_format(cpu, i);
- if (control * cpu->pstate.scaling == policy->max)
- limits->max_perf_ctl = control;
- if (control * cpu->pstate.scaling == policy->min)
- limits->min_perf_ctl = control;
- }
-
- pr_debug("intel_pstate: max %u policy_max %u perf_ctl [0x%x-0x%x]\n",
- policy->cpuinfo.max_freq, policy->max, limits->min_perf_ctl,
- limits->max_perf_ctl);
-#endif
-
if (hwp_active)
intel_pstate_hwp_set();
policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling;
policy->cpuinfo.max_freq =
cpu->pstate.turbo_pstate * cpu->pstate.scaling;
- if (!no_acpi_perf)
- intel_pstate_init_perf_limits(policy);
- /*
- * If there is no acpi perf data or error, we ignore and use Intel P
- * state calculated limits, So this is not fatal error.
- */
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
cpumask_set_cpu(policy->cpu, policy->cpus);
return 0;
}
-static int intel_pstate_cpu_exit(struct cpufreq_policy *policy)
-{
- return intel_pstate_exit_perf_limits(policy);
-}
-
static struct cpufreq_driver intel_pstate_driver = {
.flags = CPUFREQ_CONST_LOOPS,
.verify = intel_pstate_verify_policy,
.setpolicy = intel_pstate_set_policy,
.get = intel_pstate_get,
.init = intel_pstate_cpu_init,
- .exit = intel_pstate_cpu_exit,
.stop_cpu = intel_pstate_stop_cpu,
.name = "intel_pstate",
};
pstate_funcs.get_scaling = funcs->get_scaling;
pstate_funcs.set = funcs->set;
pstate_funcs.get_vid = funcs->get_vid;
+ pstate_funcs.get_target_pstate = funcs->get_target_pstate;
+
}
#if IS_ENABLED(CONFIG_ACPI)
+#include <acpi/processor.h>
static bool intel_pstate_no_acpi_pss(void)
{
force_load = 1;
if (!strcmp(str, "hwp_only"))
hwp_only = 1;
- if (!strcmp(str, "no_acpi"))
- no_acpi_perf = 1;
-
return 0;
}
early_param("intel_pstate", intel_pstate_setup);
projects / deliverable / linux.git / blobdiff