#include <linux/module.h>
#include <drm/drm_crtc_helper.h>
-static int i915_modeset __read_mostly = -1;
-module_param_named(modeset, i915_modeset, int, 0400);
-MODULE_PARM_DESC(modeset,
- "Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
- "1=on, -1=force vga console preference [default])");
-
-unsigned int i915_fbpercrtc __always_unused = 0;
-module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
-
-int i915_panel_ignore_lid __read_mostly = 1;
-module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
-MODULE_PARM_DESC(panel_ignore_lid,
- "Override lid status (0=autodetect, 1=autodetect disabled [default], "
- "-1=force lid closed, -2=force lid open)");
-
-unsigned int i915_powersave __read_mostly = 1;
-module_param_named(powersave, i915_powersave, int, 0600);
-MODULE_PARM_DESC(powersave,
- "Enable powersavings, fbc, downclocking, etc. (default: true)");
-
-int i915_semaphores __read_mostly = -1;
-module_param_named(semaphores, i915_semaphores, int, 0400);
-MODULE_PARM_DESC(semaphores,
- "Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
-
-int i915_enable_rc6 __read_mostly = -1;
-module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400);
-MODULE_PARM_DESC(i915_enable_rc6,
- "Enable power-saving render C-state 6. "
- "Different stages can be selected via bitmask values "
- "(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
- "For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
- "default: -1 (use per-chip default)");
-
-int i915_enable_fbc __read_mostly = -1;
-module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
-MODULE_PARM_DESC(i915_enable_fbc,
- "Enable frame buffer compression for power savings "
- "(default: -1 (use per-chip default))");
-
-unsigned int i915_lvds_downclock __read_mostly = 0;
-module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
-MODULE_PARM_DESC(lvds_downclock,
- "Use panel (LVDS/eDP) downclocking for power savings "
- "(default: false)");
-
-int i915_lvds_channel_mode __read_mostly;
-module_param_named(lvds_channel_mode, i915_lvds_channel_mode, int, 0600);
-MODULE_PARM_DESC(lvds_channel_mode,
- "Specify LVDS channel mode "
- "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
-
-int i915_panel_use_ssc __read_mostly = -1;
-module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
-MODULE_PARM_DESC(lvds_use_ssc,
- "Use Spread Spectrum Clock with panels [LVDS/eDP] "
- "(default: auto from VBT)");
-
-int i915_vbt_sdvo_panel_type __read_mostly = -1;
-module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
-MODULE_PARM_DESC(vbt_sdvo_panel_type,
- "Override/Ignore selection of SDVO panel mode in the VBT "
- "(-2=ignore, -1=auto [default], index in VBT BIOS table)");
-
-static bool i915_try_reset __read_mostly = true;
-module_param_named(reset, i915_try_reset, bool, 0600);
-MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
-
-bool i915_enable_hangcheck __read_mostly = true;
-module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
-MODULE_PARM_DESC(enable_hangcheck,
- "Periodically check GPU activity for detecting hangs. "
- "WARNING: Disabling this can cause system wide hangs. "
- "(default: true)");
-
-int i915_enable_ppgtt __read_mostly = -1;
-module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, int, 0400);
-MODULE_PARM_DESC(i915_enable_ppgtt,
- "Enable PPGTT (default: true)");
-
-int i915_enable_psr __read_mostly = 0;
-module_param_named(enable_psr, i915_enable_psr, int, 0600);
-MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
-
-unsigned int i915_preliminary_hw_support __read_mostly = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT);
-module_param_named(preliminary_hw_support, i915_preliminary_hw_support, int, 0600);
-MODULE_PARM_DESC(preliminary_hw_support,
- "Enable preliminary hardware support.");
-
-int i915_disable_power_well __read_mostly = 1;
-module_param_named(disable_power_well, i915_disable_power_well, int, 0600);
-MODULE_PARM_DESC(disable_power_well,
- "Disable the power well when possible (default: true)");
-
-int i915_enable_ips __read_mostly = 1;
-module_param_named(enable_ips, i915_enable_ips, int, 0600);
-MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
-
-bool i915_fastboot __read_mostly = 0;
-module_param_named(fastboot, i915_fastboot, bool, 0600);
-MODULE_PARM_DESC(fastboot, "Try to skip unnecessary mode sets at boot time "
- "(default: false)");
-
-int i915_enable_pc8 __read_mostly = 1;
-module_param_named(enable_pc8, i915_enable_pc8, int, 0600);
-MODULE_PARM_DESC(enable_pc8, "Enable support for low power package C states (PC8+) (default: true)");
-
-int i915_pc8_timeout __read_mostly = 5000;
-module_param_named(pc8_timeout, i915_pc8_timeout, int, 0600);
-MODULE_PARM_DESC(pc8_timeout, "Number of msecs of idleness required to enter PC8+ (default: 5000)");
-
-bool i915_prefault_disable __read_mostly;
-module_param_named(prefault_disable, i915_prefault_disable, bool, 0600);
-MODULE_PARM_DESC(prefault_disable,
- "Disable page prefaulting for pread/pwrite/reloc (default:false). For developers only.");
-
static struct drm_driver driver;
+#define GEN_DEFAULT_PIPEOFFSETS \
+ .pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
+ PIPE_C_OFFSET, PIPE_EDP_OFFSET }, \
+ .trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
+ TRANSCODER_C_OFFSET, TRANSCODER_EDP_OFFSET }, \
+ .dpll_offsets = { DPLL_A_OFFSET, DPLL_B_OFFSET }, \
+ .dpll_md_offsets = { DPLL_A_MD_OFFSET, DPLL_B_MD_OFFSET }, \
+ .palette_offsets = { PALETTE_A_OFFSET, PALETTE_B_OFFSET }
+
+
static const struct intel_device_info intel_i830_info = {
.gen = 2, .is_mobile = 1, .cursor_needs_physical = 1, .num_pipes = 2,
.has_overlay = 1, .overlay_needs_physical = 1,
.ring_mask = RENDER_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_845g_info = {
.gen = 2, .num_pipes = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
.ring_mask = RENDER_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_i85x_info = {
.has_overlay = 1, .overlay_needs_physical = 1,
.has_fbc = 1,
.ring_mask = RENDER_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_i865g_info = {
.gen = 2, .num_pipes = 1,
.has_overlay = 1, .overlay_needs_physical = 1,
.ring_mask = RENDER_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_i915g_info = {
.gen = 3, .is_i915g = 1, .cursor_needs_physical = 1, .num_pipes = 2,
.has_overlay = 1, .overlay_needs_physical = 1,
.ring_mask = RENDER_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_i915gm_info = {
.gen = 3, .is_mobile = 1, .num_pipes = 2,
.supports_tv = 1,
.has_fbc = 1,
.ring_mask = RENDER_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_i945g_info = {
.gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1, .num_pipes = 2,
.has_overlay = 1, .overlay_needs_physical = 1,
.ring_mask = RENDER_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_i945gm_info = {
.gen = 3, .is_i945gm = 1, .is_mobile = 1, .num_pipes = 2,
.supports_tv = 1,
.has_fbc = 1,
.ring_mask = RENDER_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_i965g_info = {
.has_hotplug = 1,
.has_overlay = 1,
.ring_mask = RENDER_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_i965gm_info = {
.has_overlay = 1,
.supports_tv = 1,
.ring_mask = RENDER_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_g33_info = {
.need_gfx_hws = 1, .has_hotplug = 1,
.has_overlay = 1,
.ring_mask = RENDER_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_g45_info = {
.gen = 4, .is_g4x = 1, .need_gfx_hws = 1, .num_pipes = 2,
.has_pipe_cxsr = 1, .has_hotplug = 1,
.ring_mask = RENDER_RING | BSD_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_gm45_info = {
.has_pipe_cxsr = 1, .has_hotplug = 1,
.supports_tv = 1,
.ring_mask = RENDER_RING | BSD_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_pineview_info = {
.gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .num_pipes = 2,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_overlay = 1,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_ironlake_d_info = {
.gen = 5, .num_pipes = 2,
.need_gfx_hws = 1, .has_hotplug = 1,
.ring_mask = RENDER_RING | BSD_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_ironlake_m_info = {
.need_gfx_hws = 1, .has_hotplug = 1,
.has_fbc = 1,
.ring_mask = RENDER_RING | BSD_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_sandybridge_d_info = {
.has_fbc = 1,
.ring_mask = RENDER_RING | BSD_RING | BLT_RING,
.has_llc = 1,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_sandybridge_m_info = {
.has_fbc = 1,
.ring_mask = RENDER_RING | BSD_RING | BLT_RING,
.has_llc = 1,
+ GEN_DEFAULT_PIPEOFFSETS,
};
#define GEN7_FEATURES \
static const struct intel_device_info intel_ivybridge_d_info = {
GEN7_FEATURES,
.is_ivybridge = 1,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_ivybridge_m_info = {
GEN7_FEATURES,
.is_ivybridge = 1,
.is_mobile = 1,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_ivybridge_q_info = {
GEN7_FEATURES,
.is_ivybridge = 1,
.num_pipes = 0, /* legal, last one wins */
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_valleyview_m_info = {
.display_mmio_offset = VLV_DISPLAY_BASE,
.has_fbc = 0, /* legal, last one wins */
.has_llc = 0, /* legal, last one wins */
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_valleyview_d_info = {
.display_mmio_offset = VLV_DISPLAY_BASE,
.has_fbc = 0, /* legal, last one wins */
.has_llc = 0, /* legal, last one wins */
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_haswell_d_info = {
.has_ddi = 1,
.has_fpga_dbg = 1,
.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_haswell_m_info = {
.has_ddi = 1,
.has_fpga_dbg = 1,
.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_broadwell_d_info = {
.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
.has_llc = 1,
.has_ddi = 1,
+ .has_fbc = 1,
+ GEN_DEFAULT_PIPEOFFSETS,
};
static const struct intel_device_info intel_broadwell_m_info = {
.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
.has_llc = 1,
.has_ddi = 1,
+ .has_fbc = 1,
+ GEN_DEFAULT_PIPEOFFSETS,
};
/*
if (INTEL_INFO(dev)->gen < 6)
return false;
+ if (i915.semaphores >= 0)
+ return i915.semaphores;
+
/* Until we get further testing... */
- if (IS_GEN8(dev)) {
- WARN_ON(!i915_preliminary_hw_support);
+ if (IS_GEN8(dev))
return false;
- }
-
- if (i915_semaphores >= 0)
- return i915_semaphores;
#ifdef CONFIG_INTEL_IOMMU
/* Enable semaphores on SNB when IO remapping is off */
/* We do a lot of poking in a lot of registers, make sure they work
* properly. */
- hsw_disable_package_c8(dev_priv);
- intel_display_set_init_power(dev, true);
+ intel_display_set_init_power(dev_priv, true);
drm_kms_helper_poll_disable(dev);
i915_save_state(dev);
intel_opregion_fini(dev);
+ intel_uncore_fini(dev);
console_lock();
intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED);
console_unlock();
+ dev_priv->suspend_count++;
+
return 0;
}
drm_helper_hpd_irq_event(dev);
}
-static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)
+static int i915_drm_thaw_early(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int error = 0;
intel_uncore_early_sanitize(dev);
-
intel_uncore_sanitize(dev);
+ intel_power_domains_init_hw(dev_priv);
+
+ return 0;
+}
+
+static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int error = 0;
if (drm_core_check_feature(dev, DRIVER_MODESET) &&
restore_gtt_mappings) {
mutex_unlock(&dev->struct_mutex);
}
- intel_power_domains_init_hw(dev);
-
i915_restore_state(dev);
intel_opregion_setup(dev);
/* KMS EnterVT equivalent */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_init_pch_refclk(dev);
+ drm_mode_config_reset(dev);
mutex_lock(&dev->struct_mutex);
intel_modeset_init_hw(dev);
drm_modeset_lock_all(dev);
- drm_mode_config_reset(dev);
intel_modeset_setup_hw_state(dev, true);
drm_modeset_unlock_all(dev);
schedule_work(&dev_priv->console_resume_work);
}
- /* Undo what we did at i915_drm_freeze so the refcount goes back to the
- * expected level. */
- hsw_enable_package_c8(dev_priv);
-
mutex_lock(&dev_priv->modeset_restore_lock);
dev_priv->modeset_restore = MODESET_DONE;
mutex_unlock(&dev_priv->modeset_restore_lock);
return __i915_drm_thaw(dev, true);
}
-int i915_resume(struct drm_device *dev)
+static int i915_resume_early(struct drm_device *dev)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
- int ret;
-
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
return 0;
+ /*
+ * We have a resume ordering issue with the snd-hda driver also
+ * requiring our device to be power up. Due to the lack of a
+ * parent/child relationship we currently solve this with an early
+ * resume hook.
+ *
+ * FIXME: This should be solved with a special hdmi sink device or
+ * similar so that power domains can be employed.
+ */
if (pci_enable_device(dev->pdev))
return -EIO;
pci_set_master(dev->pdev);
+ return i915_drm_thaw_early(dev);
+}
+
+int i915_resume(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int ret;
+
/*
* Platforms with opregion should have sane BIOS, older ones (gen3 and
* earlier) need to restore the GTT mappings since the BIOS might clear
return 0;
}
+static int i915_resume_legacy(struct drm_device *dev)
+{
+ i915_resume_early(dev);
+ i915_resume(dev);
+
+ return 0;
+}
+
/**
* i915_reset - reset chip after a hang
* @dev: drm device to reset
*/
int i915_reset(struct drm_device *dev)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_private *dev_priv = dev->dev_private;
bool simulated;
int ret;
- if (!i915_try_reset)
+ if (!i915.reset)
return 0;
mutex_lock(&dev->struct_mutex);
drm_irq_uninstall(dev);
drm_irq_install(dev);
+
+ /* rps/rc6 re-init is necessary to restore state lost after the
+ * reset and the re-install of drm irq. Skip for ironlake per
+ * previous concerns that it doesn't respond well to some forms
+ * of re-init after reset. */
+ if (INTEL_INFO(dev)->gen > 5) {
+ mutex_lock(&dev->struct_mutex);
+ intel_enable_gt_powersave(dev);
+ mutex_unlock(&dev->struct_mutex);
+ }
+
intel_hpd_init(dev);
} else {
mutex_unlock(&dev->struct_mutex);
struct intel_device_info *intel_info =
(struct intel_device_info *) ent->driver_data;
- if (IS_PRELIMINARY_HW(intel_info) && !i915_preliminary_hw_support) {
+ if (IS_PRELIMINARY_HW(intel_info) && !i915.preliminary_hw_support) {
DRM_INFO("This hardware requires preliminary hardware support.\n"
"See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
return -ENODEV;
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
- int error;
if (!drm_dev || !drm_dev->dev_private) {
dev_err(dev, "DRM not initialized, aborting suspend.\n");
if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
return 0;
- error = i915_drm_freeze(drm_dev);
- if (error)
- return error;
+ return i915_drm_freeze(drm_dev);
+}
+
+static int i915_pm_suspend_late(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+ /*
+ * We have a suspedn ordering issue with the snd-hda driver also
+ * requiring our device to be power up. Due to the lack of a
+ * parent/child relationship we currently solve this with an late
+ * suspend hook.
+ *
+ * FIXME: This should be solved with a special hdmi sink device or
+ * similar so that power domains can be employed.
+ */
+ if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
+ return 0;
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
+static int i915_pm_resume_early(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+ return i915_resume_early(drm_dev);
+}
+
static int i915_pm_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
return i915_drm_freeze(drm_dev);
}
+static int i915_pm_thaw_early(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+ return i915_drm_thaw_early(drm_dev);
+}
+
static int i915_pm_thaw(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_i915_private *dev_priv = dev->dev_private;
WARN_ON(!HAS_RUNTIME_PM(dev));
+ assert_force_wake_inactive(dev_priv);
DRM_DEBUG_KMS("Suspending device\n");
+ if (HAS_PC8(dev))
+ hsw_enable_pc8(dev_priv);
+
i915_gem_release_all_mmaps(dev_priv);
del_timer_sync(&dev_priv->gpu_error.hangcheck_timer);
*/
intel_opregion_notify_adapter(dev, PCI_D1);
+ DRM_DEBUG_KMS("Device suspended\n");
return 0;
}
intel_opregion_notify_adapter(dev, PCI_D0);
dev_priv->pm.suspended = false;
+ if (HAS_PC8(dev))
+ hsw_disable_pc8(dev_priv);
+
+ DRM_DEBUG_KMS("Device resumed\n");
return 0;
}
static const struct dev_pm_ops i915_pm_ops = {
.suspend = i915_pm_suspend,
+ .suspend_late = i915_pm_suspend_late,
+ .resume_early = i915_pm_resume_early,
.resume = i915_pm_resume,
.freeze = i915_pm_freeze,
+ .thaw_early = i915_pm_thaw_early,
.thaw = i915_pm_thaw,
.poweroff = i915_pm_poweroff,
+ .restore_early = i915_pm_resume_early,
.restore = i915_pm_resume,
.runtime_suspend = i915_runtime_suspend,
.runtime_resume = i915_runtime_resume,
/* Used in place of i915_pm_ops for non-DRIVER_MODESET */
.suspend = i915_suspend,
- .resume = i915_resume,
+ .resume = i915_resume_legacy,
.device_is_agp = i915_driver_device_is_agp,
.master_create = i915_master_create,
* the default behavior.
*/
#if defined(CONFIG_DRM_I915_KMS)
- if (i915_modeset != 0)
+ if (i915.modeset != 0)
driver.driver_features |= DRIVER_MODESET;
#endif
- if (i915_modeset == 1)
+ if (i915.modeset == 1)
driver.driver_features |= DRIVER_MODESET;
#ifdef CONFIG_VGA_CONSOLE
- if (vgacon_text_force() && i915_modeset == -1)
+ if (vgacon_text_force() && i915.modeset == -1)
driver.driver_features &= ~DRIVER_MODESET;
#endif
projects / deliverable / linux.git / blobdiff